B08_Attachment 0007 TE-03 -- PM Schedule for Hydraulic Elevator.pdf

USAG-RIA -- Technical Exhibit 03 PM Schedules for Hydraulic Elevators

M Q S A

(Monthly) (Quarterly) (SemiAnnual) (Annual)

1.00 Ride car, checking for any unusual noise or operation. Yes Yes Yes Yes

2.00 In car:

2.01 A) inspect and clean fixtures and signal in operating panel and car position and direction indicator. Yes Yes Yes Yes

2.02 B) check operation of emergency phone, lights and bell. Yes Yes Yes Yes

2.03 C) check handrails, ceiling panels and hang on panels for tightness. Yes Yes Yes Yes

2.04 D) check for tripping hazards. Yes Yes Yes Yes

3.00 Inspect and lubricate rails of hoistway. Yes Yes Yes Yes

4.00 Hallway corridor:

4.01 A) inspect hall buttons, signal lamps, lanterns and hall position indicator. Yes Yes Yes Yes

4.02 B) inspect starter station, key operation and lamps. Yes Yes Yes Yes

5.00 Motor room:

5.01 A) inspect machine room equipment. Yes Yes Yes Yes

5.02 B) lockout and log record. Yes Yes Yes Yes

5.03 C) inspect tank oil level. Yes Yes Yes Yes

5.04 D) inspect and adjust controller contacts; main operating contactors and switches. Yes Yes Yes

5.05 E) inspect pump and valve unit for leaks. Yes Yes Yes

5.06 F) inspect and adjust controller overloads; set timers. Yes

5.07 G) tighten connections and clean controller fuses and holders. Yes

5.08 H) inspect and lubricate pump motor bearings. Yes

5.09 I) inspect operation of emergency RSQ PACK or equivalent Yes Yes Yes Yes

6.00 Hatch:

6.01 A) check hoistway car rails, brackets and fish plates. Yes

6.02 B) inspect/lubricate overhead hatch switches and cams. Yes

6.03 C) inspect/clean/lubricate hatch doors locks, rollers, tracks, upthrusts, relating cables, racks, sight guards and closers, motors, gear boxes, limit and zone switches.

Yes

6.04 D) inspect door gibs and fastening. Yes

6.05 E) inspect/clean/lubricate cab top guides, steading devices, safety switches, inductors, leveling devices, selector tape, switches, hitches and fan motor.

Yes

6.06 F) check traveling cables for wear. Yes

6.07 G) inspect/clean/lubricate door operator roller tracks, upthrusts, related cables, clutch, retiring cam and door gib. Yes

Task Number

PM Description

Frequency

USAG-RIA -- Technical Exhibit 03 PM Schedules for Hydraulic Elevators

M Q S A

(Monthly) (Quarterly) (SemiAnnual) (Annual)

Task Number

PM Description

Frequency

6.08 H) inspect door operator; clean and lubricate chain and belt tension. Yes Yes Yes

6.09 I) inspect door, clean and adjust safety edge, light ray and cables. Yes Yes Yes

6.10 J) clean and adjust proximity devices on door. Yes Yes Yes

7.00 Inspect pit gland packing. Yes Yes Yes

8.00 Inspect/clean/lubricate under car guides, selector tape, traveling cable, switches and platen plate assembly. Yes

9.00 Clean equipment and surrounding area. Yes Yes Yes Yes

10.00 Fill out maintenance checklist. Yes Yes Yes Yes