B08_Attach_8_FWS_Non_Shared_Specs.pdf

U.S. FISH AND WILDLIFE SERVICE

UNIFORM COMPONENT SPECIFICATIONS

PERFORMANCE TEE (SPEC FW001)

GENERAL DESCRIPTION

The garment is a short sleeve performance tee.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn in an outdoor environment.

• Anti-microbial Dry Moisture Polyester

• Lightweight, breathable, odor resistant

• Moisture wicking drying capabilities

• Flat seams to reduce chafing or irritation

• Shrink resistant

• UPF Rating 35+ or above

• Worn as a stand-alone or layering garment

• Unisex

COLOR CHARACTERISTICS

• Navy

ST STYLE CHARACTERISTICS

Components

• 100% Polyester Jersey, 4.5oz

Detail Design

• Snagging, abrasion and pilling resistant fabric

• Wicking and anti-odor fabric properties

• Fitted

Customization:

• The official U.S. Fish and Wildlife Service Special Agent badge is screen printed in gold on wearer’s left chest.

• FEDERAL AGENT is screen printed in gold on wearer’s right chest across from badge.

• Back of shirt has screen print in gold of 1st line POLICE, second line FEDERAL AGENT, third line USFWS.

Sizes: Unisex S - 3XL

IMAGES

Front

Back

THERMAL HOODED PUFFER JACKET (SPEC FW002)

This garment is a long sleeve hooded thermal puffer jacket.

• Worn in an outdoor environment

• Shall performs in a cold climate approximately 50° to 10°F

• Shall be water and wind resistant

• Shall be breathable

• True male sizing

• True female sizing

• Brown – General Employees

• Black/Cobalt Blue – SPO

• Navy/Gray – Volunteer Program

STYLE CHARACTARISTICS

• Basic Material: 100% Nylon

• Lining: 100% Nylon

• Zipfront closure at centerfront

• Centerfront pockets have zipper closure

• Elastic sleeve cuffs

• Attached hood

• Raglan sleeves

• Inside media pocket

• Inside packable pocket for travel sewn into lining

• Adjustable hem

• D/W/R Outershell- Water repellant

• 100% Polyester thermal light weight polyfill

CUSTOMIZATION CHARACTERISTICS

• General Employees - The small standard FWS emblem should be sewn on left chest

• SPO Program - The small standard FWS emblem should be sewn on left chest

• Volunteer Program - The small standard Volunteer emblem should be sewn on left chest

SIZE CHARACTERISTICS

Male: S – 3XL

Female: XS – 2XL

General Employee – Brown

Male Female

SPO Program – Black/Cobalt Blue

Volunteer Program – Navy/Gray

DETACHABLE HOOD (SPEC FW003)

The garment is a detachable hood to be used with winter coverall.

• Worn as an outer layer in an outdoor work environment

• The garment shall be in fully lined.

• The fabric weave shall be wind and water resistant

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• Brown

• 100% Cotton 10 oz duck cloth with polyester insulation

• Snaps onto winter coverall

• Drawstring with plastic toggles

• Insulated

• Dual Sizing

Sizes:

Unisex: XS/S, M, L/XL, 2XL/3XL, 4XL and 5XL

IMAGE

PERFORMANCE BALL CAP (SPEC FW004)

This garment is a performance ball cap.

PERFORMANCE/WORK CHARACTERISTICS

• Worn in an indoor and outdoor work environment

• Worn in inclement weather

• Worn in hot and/or sunny environments

• Navy

• 100% Polyester Ripstop Fabric, 4.6oz

• 6 panel cap

• Water resistant

• Adjustable back hook and loop rear strap

• Integrated crown eyelets for ventilation

• 8 rows of bill stitching

• The official U.S. Fish and Wildlife Service Special Agent badge is embroidered in gold at center front of cap.

• FEDERAL AGENT is embroidered in gold at center back directly above adjustable strap.

• One Size

Front

Back

UNINSULATED 8” BOOT (SPEC FW005)

The boot should be GTX – Gore-Tex 100% Waterproof breathable 8-inch black boots.

• All weather, waterproof

• Waterproof, moisture wicking lining to accommodate all climates

• Shock absorbing heel and rebounding forepart pads

• Slip-resistant

• Boots shall be suitable for use on and off trails and various, uneven terrain

• Boots shall be lightweight enough to allow for all-day wear without fatiguing the wearer

• Black

• Full-grain polishable leather & 1000 denier nylon upper

• Waterproof liners inside to stay dry while allowing sweat and moisture to get out

• Vibram Kletterlift outsole

• Non-insulated

• Oil & slip resistant

• Fiberglass shank

Male: 6 – 16, available in wide widths

Female: 5 - 10

HICKING 8” BOOT (SPEC FW006)

This item is an 8” hiking boot.

• Waterproof

• 3-layer lining

• Shock absorbing heel and rebounding forepart pads

• Slip and heat resistant

• Boots shall be suitable for use on and off trails and various, uneven terrain

• Boots shall be lightweight enough to allow for all-day wear without fatiguing the wearer

• Nubuck Hydrophobic Leather

• Waterproof Construction

• Goretex 3-Layer highly abrasion-resistant lining with fleece mid-layer

• Rubber sole, wear resistant with non-slip traction

• Footbed is anatomically formed, exchangeable and washable

• Oil and gasoline resistant. Also heat resistant

• 2 zone lacing enables separate adjustment of the boot to the foot and leg area

• Unisex: 5 M – 14 (half sizes 5.5 -12.5), 7W – 14 (half sizes 7.5-12.5)

LAW ENFORCEMENT DUTY BELT (SPEC FW007)

This item is a leather duty belt with brass buckle.

• Worn in an indoor and outdoor environment

• Black

• The belt should be 100% leather. 12-14 oz.

• Brass Buckle

• Basketweave embossed leather

• 2 ¼” width

• 5 hole placements for belt adjustments

• Male: Even sizes only, RG 26 – RG 54

• Female: Even sizes only, RG 28 – RG 50

LAW ENFORCEMENT SHOULDER BROADS (SPEC FW008)

The accessory should be a pair of brown shoulder boards worn over shirt epaulets.

• Worn on shirts with epaulets in an indoor and outdoor environment

• The fabric color should be Brown, and the fabric content should be 100% Polyester.

• A whole piece of fabric should be fused.

• The hem should be turned 3/4” under and top-stitched at a margin of approximately 1/8.”

• Topstitching should be done with thread that is the same color as the shoulder board fabric.

• The center back loop seam should be sewn at 1/4” margin.

• Each shoulder board should then be turned and pressed.

• The width should be approximately 1 7/8” wide at the narrow end, and approximately 2 1/4” at the wider end.

• The length should be approximately 3 1/2.”

• Shoulder boards should be packaged as sets of 2.

LEATHER KEY HOLDER (SPEC FW009)

This item is a leather key holder with hidden snap.

• Basic Material: The leather should be full grain, bark-tanned cowhide, with all surfaces dyed brown and basket stamped (rope design in middle of basket stamp) on the front surface of item.

• Construction: The holder should be a strap of 7 1/2 oz. leather 3/4" wide, folded at one end with a straight tongue snap placed in the fold and riveted in place by the use of an eyelet and stud snap. The strap is long enough to go around a belt. The opposite end of strap has a hidden snap.

• Stitching: All seams should have DTM stitching.

• Metal Hardware: Clasp and ring made of brass.

AGENCY LOGO LANYARD (SPEC FW010)

This item is a USFWS logo lanyard in brown.

• Basic Material: Lanyard tag composed of woven USFWS logo emblem on front side with clear vinyl pouch on back for ID card storage.

• Construction: Tag is attached to a brown woven lanyard ribbon necklace to wear around employee neck. This necklace is printed in white on the face side with USFWS logo. Tag is attached to necklace with a silver ring and black plastic buckle for easy use.

• Hardware: Silver metal ring and black plastic buckle

• Small Tan FWS logo embossed in tan on lanyard

• Small standard FWS emblem sewn on card holder

• Sizes: One Size

ONE COLOR SHIELD ARTWORK & LETTERING (SPEC FW011)

The logo should be 2 screen-printed FWS logos, used on the Fire Management T-Shirt

• Worn indoor and outdoor setting

• PMS Colors: Stock Black, 186 Red

STYLE, COLOR & SIZE CHARACTERISTICS

• Screen prints

• Font Style: Serif Font

• Emblem Measurements: 4.625” L x 3.625” W (Front), 3.75” L x 9” W (Back)

ONE COLOR FWS SHIELD ARTWORK (SPEC FW012)

The logo should be a screen printed FWS logo, used on the LS Performance T-Shirt and SS Cotton T-

Shirt.

• PMS Colors: Stock Black

STYLE CHARACTERISTICS

• Screen prints

• Emblem Measurements: 3.0” L x 2.5” W

USFWS GOLD LETTERING LOGO (SPEC FW013)

The logo should be an embroidered USFWS Logo, used on Black Turtleneck

• Thread Colors: 50860 Old Gold A&E

• Backing Type: Tear away

• Logo Type: Embroidered

• Emblem Measurements: 0.48” L x 1.85” W

USFWS LETTERING LOGO (SPEC FW014)

The logo should be an embroidered USFWS Logo, used on Brown Ear Warmers

• Thread Colors: 50402 Rattan A&E

STYLE COLOR & SIZE CHARACTERISTICS

• Backing Type: Cut away

• Font Style: Block Font

• Emblem Measurements: 0.95” L x 3.50” W

FWS SMALL STANDARD EMBLEM (SPEC FW015)

The emblem should be a sew-on embroidered FWS Small Standard Shield emblem.

PMS Color Values

• 467 – Background

• 476 – Text and Borders

• 300 – Bird, Lake and Fish

• 129 – Sky

• 138 – Mountains

• Pantone Process Yellow - Sun

• White Reflective sheeting – Water and Fish

• Border Type: Stitched - Merrow

• Backing Type: Low-melt/Sew on

• Emblem Type: Embroidered

• Font Style Above Shield: Serif Font

• Font Style Below Shield: Block Font

• Emblem Measurements: 2.62” L x 3.25” W

FWS LARGE STANDARD EMBLEM (SPEC FW016)

The emblem should be a sew-on embroidered large shield emblem.

PMS Color Values

• 467 – Background

• 476 – Text and Borders

• 300 – Bird, Lake and Fish

• 129 – Sky

• 138 – Mountains

• Pantone Process Yellow - Sun

• White Reflective sheeting – Water and Fish

• Emblem Measurements: 3.18” L x 4.25” W

SMALL TALLER STANDARD FWS EMBROIDERED LOGO (SPEC FW017)

The logo should be an embroidered small Standard FWS Shield logo, specifically for headwear (taller).

Thread Color:

• 50364 Goldenrod A&E

• 50032 Blue Bird A&E

• 500887 Daffodil A&E

• 50532 Yellow A&E

• 50081 White A&E

• 50602 Wheat A&E

• 50577 Burly Brown A&E

STYLE, COLOR & SIZE CHARACTERISTICS

• Emblem Measurements: 2.76” L x 2.17” W

SMALL WIDER STANDARD FWS EMBROIDERED LOGO (SPEC FW018)

The logo should be an embroidered Small Standard FWS Shield logo, specifically for headwear

(wider).

Thread Color:

• 50032 Blue Bird A&E

• 500887 Daffodil A&E

• 50532 Yellow A&E

• 50081 White A&E

STY

• Emblem Measurements: 2.56” L x 2.15” W

FWO REFUGE OFFICER SMALL BADGE EMBLEM (SPEC FW019)

The emblem should be a sew-on embroidered FWO Refuge Officer Small Badge emblem.

Thread Colors:

• P800

• R366

• 3599

• PF523

• 3899

• D70025

• 2194

• Font Style: “US” should be Serif Font, All other font should be Block Font

• Emblem Measurements: 2.56” L x 1.75” W

FWO REFUGE OFFICER LARGE BADGE EMBLEM (SPEC FW020)

The emblem should be a sew-on FWO Refuge Officer Large Badge emblem.

• 0175

• 386

• M372

• T543

• T503

• F739

• F811

• PF736

• 2264

• Emblem Measurements: 3.31” L x 2.13” W

INSPECTOR LARGE BADGE EMBLEM (SPEC FW021)

The emblem should be a sew-on embroidered Inspector Large Badge emblem.

• R366

• P2116

• PF523

• 3899

• Emblem Measurements: 3.50” L x 2.25” W

INSPECTOR SMALL BADGE EMBLEM (SPEC FW022)

The emblem should be a sew-on embroidered Inspector Small Badge emblem.

• R366

• P2116

• PF523

• 3899

• Emblem Measurements: 2.75” L x 1.87” W

INSPECTOR LARGE EMBROIDERED LOGO (SPEC FW023)

The logo should be an embroidered Inspector Large logo.

• 50032 Blue Bird A&E

• 500887 Daffodil A&E

• 50532 Yellow A&E

• 50081 White A&E

• Backing Type: Tear away or cut away

• Emblem Measurements: 3.41” L x 2.35” W

VOLUNTEER STANDARD LARGE EMBROIDERED LOGO (SPEC FW024)

The logo should be an embroidered Volunteer Large Logo.

• 50032 Blue Bird A&E

• 500887 Daffodil A&E

• 50532 Yellow A&E

• 50081 White A&E

• Emblem Measurements: 2.99” L x 2.66” W

VOLUNTEER STANDARD SMALL EMBROIDERED LOGO (SPEC FW025)

The logo should be an embroidered FWS Standard Volunteer Logo.

• 50032 Blue Bird A&E

• 500887 Daffodil A&E

• 50532 Yellow A&E

• 50081 White A&E

• Emblem Measurements: 2.23” L x 1.98” W

VOLUNTEER LARGE STANDARD EMBLEM (SPEC FW026)

The emblem should be a sew-on Volunteer Large Standard emblem.

• PMS 300

• PMS467

• Yellow Pantone Process

• PMS 129

• PMS138

• Emblem Measurements: 3.50” L x 3.37” W

VOLUNTEER SMALL STANDARD EMBLEM (SPEC FW027)

The emblem should be a sew-on Volunteer Small Standard emblem.

• PMS 300

• PMS467

• Yellow Pantone Process

• PMS 129

• PMS138

• Emblem Measurements: 2.75” L x 2.37” W

U.S. FISH & WILDLIFE SERVICE EMBROIDERY (SPEC FW028)

Embroidery for the band above the brim of the agency sun hat.

• P8161

• Embroidery

• 0.69” high x 4.89” wide