B08_Attach_7_BSEE_Non_Shared_Specs.pdf

BUREAU OF SAFETY AND ENVIRONMENTAL ENFORCEMENT

UNIFORM COMPONENTS SPECIFICATIONS

FEMALE LONG SLEEVE EXECUTIVE OXFORD DRESS SHIRT (SPEC BS001)

GENERAL DESCRIPTION

The garment shall be a long sleeve female grey executive oxford dress shirt.

The BSEE seeks consistency of style and fit in the long and short sleeve traditional shirt.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn in year-round indoor and outdoor work environment

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a durable performance material blend

• The fabric weight shall be suitable for all weather conditions

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall resist fading and stains

• The fabric shall be wrinkle resistant

• The fabric shall provide UV sun protection

• The fabric shall be machine washable

• The fabric shall be colorfast

• The shirt shall conform to true male sizing

• The shirt shall conform to true female sizing

COLOR CHARACTERISTICS

• Grey

STYLE CHARACTERISTICS

Detail Design

• The fabric shall be 60% Polyester/ 40% Cotton

• Stain and wrinkle resistant

• Moisture wocking

• Button-down with seven front buttons

• Box pleated back

• Left chest front pocket

CUSTOMIZATION CHARACTERISTICS

• DOI patch should be sewn securely in the center of the right sleeve with the top edge ½” below the shoulder seam depending on the garment size.

• Flag patch should be sewn securely in the center of the right sleeve with the top edge ½” below the shoulder seam depending on the garment size.

• Agency patch should be sewn securely on the upper left chest.

• Direct embroider first initial and last name on upper right front chest bottom embroidery touching top pocket and full width of pocket in pantone gold thread

SIZE CHARACTERISTICS

Female 2-28

IMAGE

3-IN-1 SYSTEMS PARKA (SPEC BS002)

The BSEE seeks consistency of style and fit in a 3-in-1 parka and this spec is an effort to standardize the style and fit.

The image provided below is the currently parka.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn in an outdoor work environment

• The fit shall be comfortable and allow for full range of motion to include bending, reaching, climbing, squatting without coming apart at the seams

• The fabric content shall be a durable performance material blend

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be machine washable

• The fabric shall be colorfast

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• Unisex

Navy Blue

STYLE CHARACTERISTICS

Detail Design

• 100% Polyester shell with DWR water repellent finish

• 100% Polyester fleece polar zip-out liner

• Stowable hood

• External full length storm flap with snap closures

• Reflective trim

• Internal zipper secured pocket

• Lower cargo pockets

• Chest zipper pocket

Customization applies to shell and liner:

• DOI patch should be sewn securely in the center of the right sleeve with the top edge ½” below the shoulder seam depending on the garment size.

• Flag patch should be sewn securely in the center of the right sleeve with the top edge ½” below the shoulder seam depending on the garment size.

• Agency patch should be sewn securely on the upper left chest.

• Direct embroider first initial and last name on upper right front chest bottom embroidery touching top pocket and full width of pocket in pantone gold thread

Small – 5XL

BSEE PATCH LOGO (SPEC BS003)

Bureau of safety and Environmental Enforcement logo to be attached to various BSEE uniform components and available for purchase.

• Worn indoor and outdoor setting

• PF3432 Blue (Pantone 297)

• PF900 Black (Pantone 5)

• PF800 White

Component

• Patch

• Block Font

• Overlock border type

• Polyester thread

• Thermoplastic backing

• BSEE will provide an example of the logo to be duplicated

• 3.75’ wide X 2.5” heigh

DOI PATCH LOGO (SPEC BS004)

Bureau of safety and Environmental Enforcement logo to be attached to various uniform components and available for purchase.

• PMS 549C

• PMS 110C

• PMS 201C

• PMS 142C

• PMS 143C

• PMS 555C

• PMS 232C

• PMS412C

• PMS 7413C

• White

• Merrowed border type

• 3.5” round

US FLAG PATCH LOGO (SPEC BS005)

• 1020 Red

• 1316 Royal

• 1112 Athletic Gold

• 1160 White

• Merrowed border type

• 3.5: wide x 2” heigh

LOGO FOR BALL CAP (SPEC BS006)

• 50604 Butterscotch A&E

• Embroidered 4,063 stitch count

• Tear away or cut away backing

• 4.26 wide x 1.57 heigh

DIRECT NAME EMBROIDERY (SPEC BS007)

Name embroidery applied on name tag patch (shared specification).

• 50604 Butterschotch A&E

• Block Font, size 8mm

• Embroidery shall be first initial and last name only.

• First initial and first letter of last name shall be capitalized with the remaining last name letters in lower case.

▪ Example: J. Doe

• Varies based on the length of name

IMAGE – No example of name embroidery.