B08_Attach_4_NPS_Non_Shared_Specs.pdf

NATIONAL PARK SERVICE

UNIFORM COMPONENTS SPECIFICATIONS

BALACLAVA (SPEC NP001)

GENERAL DESCRIPTION

Balaclava

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• The fabric content shall be a performance material

• The fabric weight shall be suitable for cold climates

• Unisex

COLOR CHARACTERISTICS

• Black

STYLE CHARACTERISTICS

Salient Characteristics:

• The color shall be black.

• Breathable, 4-way stretch

• Moisture wicking comfort

Customization: N/A

Stock Sizes:

• One Size

UNIFORM COMPONENT SPECIFICATIONS

NPS ARROWHEAD EMBLEM (SPEC NP002)

Gender: Unisex

This patch shall come in two versions: Sew on and Iron

This patch is a sublimation and embroidered Arrowhead emblem.

SALIENT CHARACTERISTICS

Components

Border Type: Stitched – Hot Needle Cut

Backing Type: Low-melt/Sew on

Emblem Type: Due Sublimated - Embroidered combination

Thread colors: D900 Black, D800 White, DT786 Brown, D20054 Green

Sizes: One Size 2-3/4” wide by 3-1/2” tall

NPS RANGER BADGE EMBLEM (SPEC NP003)

This patch shall come in two versions: sew on and iron on.

This patch shall be a sublimation and embroidered Ranger Badge emblem.

Border Type: Stitched - Merrow

Backing Type: Low-melt/Sew on

Thread colors: 03 Sand, 55 Mylar, 10 Copper

Sizes: One Size 1-15/16” wide by 2-11/16” tall

NPS LE RANGER BADGE EMBLEM (SPEC NP004)

This patch shall be made available in two versions: sew on and iron on

This patch is a sublimation and embroidered LE Ranger Badge emblem.

Border Type: Hot Knife Border

Backing Type: Hook and Loop Backing

Thread colors: Proprietary Polyester Thread – DTL512, DTL814, DTL783, ST103, PG-1

Sizes: One Size 1-13/16” wide by 2-3/4” tall

BUTTONS (SPEC NP005)

These are metal acid bronze buttons that are used for the Ike jacket and Dress coat in the National Parks

Service Program.

24 Ligne Shank Buttons 36 Ligne Shank Buttons

• Construction: The metal bronze button shall have a vertical shank on the center back of the button.

The artwork embossed on the button shall be specific to the National Parks Service. It shall be an eagle on an olive branch with the following script circling the edge “NATIONAL PARK SERVICE*

DEPT. OF THE INTERIOR.”

• Basic: 24 Ligne Button is produced by Waterbury button, vendor style # 1107802436C0422 36

Ligne Button is produced by Waterbury Button, vendor style #1107803634C0422

IMAGES

36 LIGNE 24 LIGNE

Men’s Grey Fire-Resistant Coverall (SPEC NP006)

The garment shall be a gray long sleeve coverall.

Bulwark Men’s Grey IQ Series Endurance Premium Coverall or equivalent

* Fabric Content & Color: The shell fabric shall be flame-resistant 6.9 oz., Ripstop twill 65%

Cotton/ 35% Polyester. The color shall be Grey.

* Vendor Style Description:

• Two-way, concealed, Nomex® tape, brass break-away zipper

• Concealed snap at top of zipper and at neck

• Adjustable concealed snap closure on cuff

• Elastic waist back

• Two front swing pockets, two angled chest pockets with flaps and concealed snap closure, two patch hip pockets, left sleeve pocket, one cargo pocket, one patch pocket on leg, cell phone pocket in pocket bag

• Yoke with deep pleated action back

• Side vent openings with snap closure

• This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, 2018 Edition

• Protection: Arc Rating ATPV 9.0 calories/cm2

* Customization: The U.S. National Park Service arrowhead emblem shall be sewn on the left sleeve covering Bulwark triangle.

Sizes: 34 –58 or XS - 4XL

Unisex LS BASE LAYER SHIRT (SPEC NP007)

The garment shall be a long sleeve base layer shirt.

• The fabric weight shall be suitable for year-round wear in an indoor and outdoor environment

• The fabric weave shall be breathable

• The fabric shall be machine-washable

• Ranger Grey - NPS

COMPONENTS

Basic Material: The material shall be moisture wicking. The color shall be Ranger Gray.

Thread: The thread shall be dyed to match, or as close in color to the body fabric as possible.

Buttons: The buttons shall be dyed to match.

Detail Design Characteristics

Closure: Dyed to match buttons.

Collar: Banded

Cuff: Two button cuff with button sleeve placket.

Interlining: Collar, Placket and Cuffs

Customization: NPS arrowhead emblem on left sleeve.

NPS Ranger Badge or NPS LE Badge heat sealed on upper left chest

Other Features: ½” Wide mic loop and wire access on both side seams

Sizes: XXS - 4XL

Unisex SS BASE LAYER SHIRT (SPEC NP008)

The garment shall be a short sleeve base layer shirt.

• Ranger Grey - NPS

Basic Material: The material shall be moisture wicking. The color shall be Ranger Gray.

Thread: The thread shall be dyed to match, or as close in color to the body fabric as possible.

Buttons: The buttons shall be dyed to match.

Detail Design Characteristics

Closure: Dyed to match Melamine buttons.

Collar: Convertible

Interlining: Collar and Placket

Customization: NPS arrowhead badge on left sleeve.

NPS Ranger Badge or NPS LE Badge heat sealed on upper left chest

Other Features: ½” Wide mic loop and wire access on both side seams.

Sizes: XXS - 4XL

LS SAR T-Shirt (Unisex) (SPEC NP009)

This garment shall be a long sleeve performance t-shirt.

• Safety yellow

• 100% polyester

• Moisture wicking

• UV protection

• Easy care

Customization: All customization shall be done in dark silver reflective. ‘SEARCH AND RESCUE’ logo shall be applied to the center middle back, ‘NPS SAR’ logo shall be applied to the left upper front chest, ‘National Park Service Search & Rescue’ logo shall be applied to the right sleeve.

Sizes: RG XS-4XL

SS SAR T-Shirt (Unisex) (SPEC NP0010)

This garment shall be a short sleeve performance t-shirt.

• Safety yellow

• 100% polyester

• Moisture wicking

• UV protection

• Easy care

Customization: All customization shall be done in dark silver reflective. ‘SEARCH AND RESCUE’ logo shall be applied to the center middle back, ‘NPS SAR’ logo shall be applied to the left upper front chest, ‘National Park Service Search & Rescue’ logo shall be applied to the right sleeve.

Sizes: RG XS-4XL

FIELD JACKET LINER (SPEC NP011)

Quilted Jacket Liner for Field Jacket

• Worn as a liner for the Field Jacket

• The fit shall be comfortable and allow for full range of motion

• The fabric weight shall be suitable for cold weather conditions

• Basic Material: The body should be Black 5 ounce bonded polyester fiberfill 3” point to point

Diamond quilted with 70 denier nylon taffeta face and 50 denier nylon taffeta back. The sleeves should be Black 3 ounce bonded polyester fiberfill 3” point Diamond quilted with 70 denier nylon taffeta face and 50 denier nylon taffeta back.

• Thread: The entire garment should be sewn with polycore or 100% spun polyester thread.

• Zippers: There should be an interlining zipper, double shrunk, center marked, and interchangable attached to the liner. The zipper should be of sufficient length to be satisfactorily attached to the facing of the jacket.

General Instructions

• Stitching: The exposed body seams should be bound with 1 9/16” black rayon bias binding. The side seams, shoulder seams, and sleeve seams should be joined with a serge sew safety stitch machine.

• Front: The lining is curved at the base of the zipper.

• Sleeves: Bound with 9/16” black rayon bias binding.

Sizes:

• Short M

• Regular XS – 3XL

• Long M – 3XL

FIELD JACKET (SPEC NP012)

Permanent press jacket with zipper from bottom of jacket to bottom of collar, two piece convertible collar, with two outside breast pockets with pointed flaps. This jacket should be designed to allow a liner to be placed inside for colder climates. This jacket comes in two versions: 1)With Badge Tab and Name Plate

Holder and 2) Without Badge Tab and Name Plate Holder

• Worn in an indoor/outdoor environment

• The fit shall be comfortable and allow for full range of motion

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be machine-washable

• The fabric shall resist fading

• The fabric shall resist stains

• The fabric shall be wrinkle resistant

• Ranger Green

Basic Material: The material should be Forest Green.

Thread: The thread for all sewing operations should be Rayon covered polyester or 100% spun polyester, dyed to match shade of self material, conforming to ticket number 50-2 or 3 ply and 70-2 or 3 ply of MIL- T-43548. All lockstitch (301) should use 50 ply, all chainstitch (401) should use 50 ply for needle and 70 ply, and safety stitching (515 and 516) should use 50 ply for the looper, overedging (503 and 504) should use 70 ply, and safety stitching (515 and 516) should use 50 ply for the needle thread and 70 ply for other threads.

Zipper: A brass Talon #42 zipper or equal is required. Zipper with brass teeth and slider-ratcheting-auto lock slider. Concealed zipper tape should be blended polyester/cotton or nylon/cotton.

Cutting: Fronts, backs, sleeves, pockets and flaps should be cut lengthwise in goods. Collars and cuffs should be cut in the filling direction.

Stitching: All joining seams, including sideseams, shoulder join, sleeve join, and bottom band should be

12-12 gauge (515 or 516) safety stitched.

Collar: Collar should be two-piece convertible style. Collar should have an interlining compatible with permanent press finish. Collar should be stitched, topstitched ¼ gauge and restitched to garment during attaching operation with 301 stitch type. Collar points should be 3” long, and collar should measure 2 ¾” at center back.

Front: Closure: Zipper tape should be sandwiched between front and facing, attached with single needle 30 stitch, color to match self material. There should be 3/8” topstitching along the zipper.

Inside Zipper Track: The jacket should be manufactured with an inside zipper track to accommodate zip-in/out liner with long sleeves.

Facing: The jackets should have an approximate 3” inside facing which should be bound with 3/8” acetate or nylon tape. Along the facing edge, the zipper tape should be attached. The size and teeth of this zipper should be of such construction as to allow it to be joined with a zip-in/out liner. Facing and zip-in liner should be joined to zipper tape with 1 row of ¼” gauge 301 stitching.

Pocket Flaps: Each flap should have 2 needle, ¼” gauge topstitching. Left flap should have a pencil division with each side of opening bartacked. Flaps should have straight side with single point at center.

Flaps should measure 6 3/8” wide, 1 5/8” at sides, and 2 ½” at center. Flaps should have buttonholes that are in alignment with buttons. Ends of flaps should be bartacked. Flaps should be attached with a 2 needle

¼” gauge.

Pockets: Self material, attached with 2 rows, 1/4 gauge, 301 stitch. Both pockets should have a 27 ligne melamine button. Pocket size 6 ¾" wide by 6 ½” deep with mitered corners. Ends of pocket openings should be bartacked.

Sleeves: One piece, coat style, set in sleeves, safety stitched, without vent.

Cuffs: One piece design, clip corner, dress style, rectangular appearance, 2 " wide, and attached with 12-12 gauge (515 or 516) safety stitch. After joining cuff, turn seam allowance up and topstitch ¼” above joining seam. Each cuff should have one buttonhole with two 27 ligne melamine buttons on each cuff.

Bottoms: Should finish with 2 ½” band. Jackets to have side knitted band, centered over side seam, 2 ½” high and 4” wide of 93% nylon/7% elastic double knit, 2 x 2 rib cardigan with color to match self-material.

After joining band to main panels, the seam allowance should be folded up and caught by topstitching on outside of jacket ¼” above joining seam. The front waistbands should be topstitched at the bottom and each side.

Patch: A National Park Service arrowhead shoulder patch shall be sewn securely in the center of the left sleeve with the top edge 1 ¾” to 2” below the shoulder seam depending on the garment size. The patch shall be sewn with inconspicuous stitching using brown thread closely matching the emblem background color.

Customization

• Badge Reinforcement: Badge tab should be constructed of self-fabric, lined with 2 black metal eyelets

1” apart vertically from center to center and should be sewn ½” above left breast pocket flap. Finished tab should be 2” long and 1” wide.

Regular XS-3XL

Long M-3XL

Image shown is with badge tab and nameplate holder

GAITERS (SPEC NP013)

Expedition style gaiter that provides heavy-duty protection and insulation for extended mountaineering trips in harsh conditions.

Performance/Work Environment Characteristics:

• Worn outdoors

• Waterproof and weather resistant (i.e., rain, snow, sleet)

• Gaiters shall be durable and last to industry standard

• Gaiters shall have a Gore-tex or equivalent lining membrane

Color Characteristics:

• Ranger Green

Regular and X-Large

IMAGE

BRASS BELT BUCKLE (REPLACEMENT) (SPEC NP014)

Replacement brass belt buckle. Suitable for use on both the 9oz and 14oz (heavy-duty) embossed work belts.

Hardware: Two snaps, Rau manufacturer, No. 8020-F9, 8029-F10, 8031-F10, 8042-F10, or equal. Solid brass, polished gilt finish, 1-1/2” Waterbury buckle or equal.

Customization:

Gold Plated

Stock Sizes: One Size

NAME PLATE – SIGN LANGUAGE (SPEC NP015)

GENERAL DESCRIPTION:

The accessory is a metal name plate/bar with additional engraving used to identify the wearer as a Sign

Language Interpreter.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS:

• Worn with uniform in an indoor and outdoor environment

• Must not tarnish

• Clutch back or magnetic versions must be strong enough to remain attached to shirt in all work conditions

Finish gold electroplate on brass metal

Style Characteristics:

• All metal, die struck nameplate

• Magnetic and clutch back fasteners

• Brass metal with gold electro-plate

• Engraved individual name with color filled black

Custom Characteristics:

NPS – plain name bar with second line of engraving indicating the individual is a sign language interpreter

Size Characteristics:

Unisex

050 x ¾” x 3” polished edging 1/16”

NAME PLATE – I Sign (SPEC NP016)

GENERAL DESCRIPTION:

The accessory is a metal name plate/bar with additional engraving used to identify that the wearer can use

Sign Language.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS:

• Must not tarnish

• Finish gold electroplate on brass metal

• All metal, die struck nameplate

• Magnetic and clutch back fasteners

• Brass metal with gold electro-plate

• Engraved individual name with color filled black

NPS – plain name bar with second line of engraving hand gestures and I Sign unisex

050 x ¾” x 3” polished edging 1/16”

NAME PLATE – TWO LANGUAGE (SPEC NP017)

General Description:

The accessory is a metal name plate/bar with additional engraving used to identify the wearer as a

Language (foreign language) Interpreter.

Performance/Work Environment characteristics:

• worn with uniform in an indoor and outdoor environment

• must not tarnish

• clutch back or magnetic versions must be strong enough to remain attached to shirt in all work conditions

• finish gold electroplate on brass metal

• all metal, die struck nameplate

• magnetic and clutch back fasteners

• brass metal with gold electro-plate

• engraved individual name with color filled black

NPS – plain name bar with two additional lines of engraving. The additional lines of engraving shall be available in the following options, engraved in the native language:

• I speak Spanish

• I speak French

• I speak German

• I speak Chinese

• I speak Japanese

• unisex

• 050 x ¾” x 3”

• polished edging 1/16”

NAME PLATE- HAWAIIAN CHARACTERS (SPEC NP018)

The accessory is a metal name plate/bar that spells employee name using traditional Hawaiian Characters and Accents

• worn with uniform in an indoor and outdoor environment

• must not tarnish

• clutch back or magnetic versions must be strong enough to remain attached to shirt in all work conditions

Name is engraved using traditional Hawaiian Characters and Accents

Nameplate shall come in two versions:

• Regular with just the name engraved

• Service with the Arrowhead attached and Hawaiian Name and National Service engraved under the name

NAME PLATE – VOLUNTEER RECOGNITION (SPEC NP019)

The accessory is a metal name plate/bar with additional engraving used to identify the wearer as a V.I.P. Volunteer and identifying years of service.

• Must not tarnish

NPS – plain name bar with additional engraving for years of service

TIE TACK (SPEC NP020)

H. Blackinton style #A4270 design, arrowhead shape, 13/16" top to bottom and 11/16" side to side at widest point. Center to depict a giant sequoia tree, mountain, lake and bison raised from matt background with lettering "National Park Service" located in upper right portion of design.

Basic Material: The material shall be a die struck, gold electroplated, 14 gauge (.064) brass.

General: Border and center motif shall have polished highlights.

Attachment: F145 post, clutch chain and bar - V555, ½".

Quality Assurance:

Production sample shall be approved by NPS COR.

SHOE STRINGS (SPEC NP021)

The shoe strings serve as replacement shoe strings for Men’s and Women’s Dress shoes.

Shoe strings shall be available to order in two sizes.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• to be worn in an indoor and outdoor environment

• Wax Coated

• 2 per package

Black

• 24 inches

• 30 inches.

LIFEGUARD - WHISTLE WITH LANYARD (SPEC NP022)

Fox 40 Sonik Blast CMG, with Breakaway Lanyard, red (Item No. 9203–0208), or equal

Whistle with cushioned mouth grip (CMG); two chambers; four resonators; pea- less; with sound power that exceeds 120 decibels.

COLOR CHARCTERISTICS

Red

CUSTOMIZATION CHARACTERISTICS

SIZE CHARACTERISTICS

One Size

LIFEGUARD – SWIMSUIT (MEN) (SPEC NP023)

Speedo Men’s Solid Dive Suit, Style No. 7300121 (red), or equal

• Soft and comfortable fit

• Durable, resistant to shrinkage

• Abrasion/ pilling resistant

• Quick drying

• Chlorine resistant

• UV Protection

• NPS LIFEGUARD is silk screened on left upper section of short

Size Range 28 - 40

LIFEGUARD – SWIMSUIT ONE PIECE (WOMEN) (SPEC NP024)

Speedo Women’s One-Piece Solid Lycra® Flyback Swimsuit, Style No. 819006 (red), or equal

• UVA and UVB 50+ protection

• Durastitch for hundreds of durable hours

• Long-lasting straps

Detail Design

80% nylon / 20% lycra

• NPS logo on center front

Size Range 22 - 40

LIFEGUARD – SWIM TOP (WOMEN) (SPEC NP025)

Speedo Women’s Solid Flyback Top – Separate, Style No. 719849 (red), or equal

• Durable, resistant to shrinkage

• Abrasion/pilling resistant

• Quick drying

100% polyester

• NPS logo on center front

Size Range XS - XL

LIFEGUARD – SWIM BOTTOMS (WOMEN) (SPEC NP026)

Speedo Women’s Solid Bikini Bottom – Separate, Style No. 719852 (red), or equal

• Durable, resistant to shrinkage

• Abrasion/pilling resistant

• Quick drying

Size Range XS - XL

LIFEGUARD – BOARD SHORTS (MEN) (SPEC NP027)

Birdwell Beach Britches, Guard Britches 15 inches, Style No. 307 (red), or equal

• 9 inseam length and easy elastic waist

• Internal drawcord

• Durable, resistant to shrinkage

• Abrasion/pilling resistant

• Quick drying

80% nylon / 20% lycra

• NPS logo with Lifeguard lettering silkscreened on lower thigh left

Size Range XS – 4XL

LIFEGUARD – BOARD SHORTS (WOMEN) (SPEC NP028)

Birdwell Beach Britches, Guard Britches 10½ inches, Style No. 302 (red), or equal

• Durable, resistant to shrinkage

• Abrasion/pilling resistant

• Quick drying

100% nylon

• NPS logo with Lifeguard lettering silkscreened on lower thigh left

Size Range S - 2XL

LIFEGUARD – BASEBALL CAP (UNISEX) (SPEC NP029)

Unisex- Flexfit Baseball Cap, Style No. 6530 (red), or equal

• Durable, resistant to shrinkage

98% nylon / 2% spandex

• NPS logo embroidered in white on center front

Size Range: One Size

LIFEGUARD – T-SHIRT SS (UNISEX) (SPEC NP030)

Short Sleeve Crew Neck T-Shirt

Ranger Gray

• 3/4 inch rib knit collar

• Double-needle stitched sleeves and bottom hem

• Taped neck and shoulders

100% cotton

• NPS logo with Lifeguard lettering silkscreened in red on Upper Left Chest

• National Park Service and Lifeguard silkscreened in red Centered on Back

Size Range: S – 3XL

LIFEGUARD – T-SHIRT LS (UNISEX) (SPEC NP031)

Long Sleeve Crew Neck T-Shirt

• Advanced moisture management performance

• Double-needle coverstitching on front neck

• Rib knit cuffs

• Double-needle hem

50% polyester / 50% cotton

LIFEGUARD – BROAD BRIM HAT (UNISEX) (SPEC NP032)

Original Watermen Canvas Tonga Hat, Style No. SKU: THC (Sand), or equal; Bucket-style hat

• Worn in outdoor environment

• Used to provide Sun Protection

• Screen vents

• snaps on both sides and chincord

NPS logo embroidered in red on center front of hat

Size Range: S – 2XL

LIFEGUARD – HOODED SWEATSHIRT (UNISEX) (SPEC NP033)

14-oz., Hooded Sweatshirt, No Zipper

• Contrast two-ply hood with matching drawstring

• Contrast half-moon facing and woven tape at back of neck

• Front pouch pocket

• Ribbed spandex enhanced trim

90% cotton / 10% polyester

LIFEGUARD – SWEAT PANTS (UNISEX) (SPEC NP034)

12-oz., Closed-Bottom, Sweat Pant

• Encased elastic cuffed leg hems

• Low shrinkage

• Side pockets

• Self-fabric waistband with cotton draw cord

90% cotton / 10% polyester

• NPS logo with Lifeguard lettering silkscreened in red on Upper Left Leg

LIFEGUARD – WINDPROOF/WATER RESISTANT JACKET (UNISEX) (SPEC

NP035)

WINDPROOF/WATER RESISTANT JACKET

• Breathable

• Windproof

• Waterproof shell and zippers

• Seam-sealed

• Mesh-lined body and hood

• Adjustable hood

• Cuffs and bottom hem

• NPS logo with Lifeguard lettering silkscreened in white on Upper Left Chest

• National Park Service and Lifeguard silkscreened in white Centered on Back

Size Range: S – 4XL

LIFEGUARD – RAIN JACKET (UNISEX) (SPEC NP036)

Rain Jacket

Yellow

• Leaf collar with detachable hood

• Raglan sleeve design for ease of movement

• Slash-thru opening with pockets on each side

• Snap front closure with interlocking storm flap

• Underarm vents

LIFEGUARD – RAIN PANTS (UNISEX) (SPEC NP037)

Rain Pants

Black

• Elastic waist in back

• Take up snaps at waist

• Slash side opening pockets

• Self-fabric waistband with cotton draw cord

• Take up tabs at cuffs

100% nylon

• NPS logo with Lifeguard lettering silkscreened in red on upper left leg

WIND-STOPPER SWEATER (UNISEX) (SPEC NP038)

The garment shall be a long sleeve V-neck pullover sweater.

Ranger Green

• The garment should be a v-neck.

• The garment should have poly/cotton-twill patches on the elbows and shoulders.

• The garment should have rib knit cuffs.

• The garment should have a badge tab on left upper front and a nameplate tab on the right upper front.

• Basic Material: The fabric should be 70% Durapil Acrylic / 30% Wool, 7GG Jersey

Knit.

• Lining: The garment should have a lining in the body and sleeves made of 100% Gore-

Tex to act as a windstopper.

• The garment should have the NPS SHADED ARROWHEAD emblem on the left sleeve at seam

Size Range: XS – 4XL

LOW HEELED PUMP (SPEC NP039)

Brown low heel pump

• Non-slip sole

• Brown

Sail- 90232- Brown Leather Low Pump or equivalent

• Plain

• Pump slip

• Smooth leather

• One piece folded top pump with closed heel and toe (heel height not to exceed 1

1/4 inches)

• Female sizes

• B width 5-11 half sizes included and size 12

• D width: 5.5-11 half sizes included

NPS LE FLEX BADGE HEAT SEAL (SPEC NP040)

The Heat Seal emblem shall be a LE flex badge heat seal.

* Material: Polyurethane

* Backing Type: Adhesive film for textiles; ECO hot melt glue 135

* Dimensions: 1.877”W x 2.779”H

* Colors:

Main:

Inner Buffalo image; 484C, 137C, 718C, 497C, 7584C, 7571C, 7574C, 1205C, 7583C, 141C, 7586C, 7752C, 123C

NPS RANGER FLEX BADGE HEAT SEAL (SPEC NP041)

The Heat Seal emblem shall be a Ranger flex badge heat seal.

• Material: Polyurethane

• Backing Type: Adhesive film for textiles; ECO hot melt glue 135

• Dimensions: 1.986”W x 2.754”H

Colors:

Main:

Inner Buffalo image; 484C, 137C, 718C, 497C, 7584C, 7571C, 7574C, 1205C, 7583C, 141C, 7586C, 7752C, 123C