B08_Attach_5_BLM_Non_Shared_Specs.pdf

BUREAU OF LAND MANGEMENT

UNIFORM COMPONENT SPECIFICATIONS

FLAME RESISTANT UNLINED BIB OVERALL (SPEC BL001)

GENERAL DESCRIPTION

The garment shall be flame resistant unlined bib overall.

PERFORMANCE/WORK ENVIRONMENT CHARACTERISTICS

• Worn in an outdoor environment

• The fit shall be comfortable and allow for full range of motion to include bending, reaching, climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

• The garment shall conform to true male sizing

• The garment shall conform to true female sizing

COLOR CHARACTERISTICS

• Duck Navy

STYLE CHARACTERISTICS

Detail Design

• Nomex® taped brass zipper fly front, covered

• Leg zippered to thigh

• Adjustable elasticized shoulder straps with heavy-duty release buckles

• One large front bib pocket with pencil stall

• Two set-in swing pockets

• Two large hip pockets

• Watch pocket, hammer loop, tool pocket, double tool pocket

• Side vent openings with snap closure

• Reinforced double knees

• The garment must meet the requirements of current NFPA 2112, Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

CUSTOMIZATION CHARACTERISTICS

• Small Bureau of Land Management emblem shall be sewn on center front chest.

SIZE CHARACTERISTICS

Male

• Stock: M-3XL

• Non-Stock: XS-S; 4XL-7XL

Female

• Stock: S-2XL

• Non-Stock: XS; 3XL-4XL

IMAGES - There currently is no image with agency customization. Example of color and style.

FLAME RESISTANT INSULATED BIB OVERALL (SPEC BL002)

The garment shall be flame resistant insulated bib overall.

climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

• Heavy weight insulated

• The garment shall conform to true male sizing

• The garment shall conform to true female sizing-shirt

• Leg zippered to thigh

• Adjustable elasticized shoulder straps with heavy-duty release buckles

• One large front bib pocket with pencil stall

• Two set-in swing pockets

• Two large hip pockets

Tool pocket

• Side vent openings with snap closure

• Water repellent

• Reinforced double knees

• The garment must meet the requirements of current NFPA 2112, Standard on Flame-Resistant

• Small Bureau of Land Management emblem shall be sewn on center front chest.

• Stock: M-3XL

• Non-Stock: XS-S; 4XL-7XL

• Non-Stock: XS; 3XL-4XL

IMAGES - There currently is no image of insulated duck navy bib overalls.

FLAME RESISTANT WESTERN STYLE SHIRT (SPEC BL003)

The garment shall be flame resistant long sleeve work shirt.

• Worn in an indoor and outdoor environment

• The fit shall be comfortable and allow for full range of motion

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Unisex sizing

• Navy

• Button up style

• Western front and back yoke

• One to two snap flap pockets with pencil slot

• Front with snap closure

• Two to three snap adjustable cuffs

• This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-

Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition; EN

ISO 11612:2008, Protective clothing against heat and flame; EN 340:2003, Protective clothing

– General requirements; and IEC 61482-2:2009, Live working – Protective clothing against the thermal hazards of an electric arc

• Protection: Arc Rating ATPV 8.6 calories/cm2

• Small Bureau of Land Management emblem shall be sewn on the left upper front chest.

• Optional Nametag: Cloth navy blue name tag with embroidered name (first name or first initial and last name) in light gray or tan thread. Nametag sewn on ¼’ above right pocket.

Unisex:

• Stock: Small – 2XL Regular, Big and Tall

• Non-stock: 3XL-5XL

• Neck: 13 5/8” – 21 ½”

• Chest: 34 ½” – 62”

▪ Sleeve Length: Regular 34 ½” 37 ¾”; Long 35 ¾” – 39 ¼”

IMAGES - Images are of current shirt in tan, color change to navy.

FLAME RESISTANT WORK SHIRT (SPEC BL004)

The garment shall be flame resistant long sleeve work shirt. This uniform item is designated as a

CORE item.

climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

• The shirt shall conform to true male sizing

• The shirt shall conform to true female sizing

• Button Up style

• Two chest pockets with button flap closures and pencil stall

• Button closure cuffs with sleeve vents

• Gussets for mobility and breathability

• This flame-resistant garment meets the requirements of NFPA 2112, Standard on Flame-

Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition; EN

ISO 11612:2008, Protective clothing against heat and flame; EN 340:2003, Protective clothing

– General requirements; and IEC 61482-2:2009, Live working – Protective clothing against the thermal hazards of an electric arc

• Protection: Arc Rating ATPV 8.6 calories/cm2

Female sizing – Petite, Regular and Tall

• Stock: Small – 2XL; Regular

• Non-Stock: XS, 3XL-4XL; Petite and Tall

Male sizing – Regular and Tall

• Stock: Small –3XL; Regular and Tall

• Non-Stock: 4XL-6XL; Regular and Tall

IMAGES - Images are of current shirt in tan, color change to navy.

Male Female

FLAME RESISTANT LONG SLEEVE T-SHIRT (SPEC BL005)

The garment shall be flame resistant long sleeve t-shirt.

and without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

• Underarm gussets for mobility and breathability

• Breathable moisture wicking fabric

• Front chest pocket with pencil stall

• Rib knit cuffs

• This flame-resistant garment must meet the requirements of NFPA 2112, Standard on Flame-

Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition; EN

ISO 11612:2008, Protective clothing against heat and flame; EN 340:2003, Protective clothing

– General requirements; and IEC 61482-2:2009, Live working – Protective clothing against the thermal hazards of an electric arc

• Unisex and last name) in light gray thread. Nametag sewn on ¼’ above right pocket.

Unisex

• Stock: S-3XL; Regular and Long

• Non-Stock: 4XL-6XL Regular and Long

IMAGES - Example of color, style and customization options.

FLAME RESISTANT LIGHTWEIGHT LONG SLEEVE T-SHIRT (SPEC BL006)

The garment shall be flame resistant long sleeve t-shirt. This uniform item is designated as a CORE item.

and without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Underarm gussets for mobility and breathability

• Front chest pocket with pencil stall

• Rib-knit or similar crewneck collar and cuffs

• This flame-resistant garment must meet the requirements of NFPA 2112, Standard on Flame-

Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition; EN

ISO 11612:2008, Protective clothing against heat and flame; EN 340:2003, Protective clothing

– General requirements; and IEC 61482-2:2009, Live working – Protective clothing against the

• Non-Stock: 4XL-6X: Regular and Long

IMAGES - Example of color, style and customization options.

FLAME RESISTANT LIGHTWEIGHT HENLEY (SPEC BL007)

The garment shall be flame resistant lightweight Henley style shirt. This uniform item is designated as a CORE item.

and without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

Components

• Female and Male fit

• 100% Cotton

• Knit Henley style collar with minimum three button front placket

• Underarm gussets for mobility and breathability

Front chest pocket with pencil stall

• Rib-knit cuff

• This flame-resistant garment must meet the requirements of NFPA 2112, Standard on Flame-

Resistant Garments for Protection of Industrial Personnel Against Flash Fire, 2012 Edition; EN

ISO 11612:2008, Protective clothing against heat and flame; EN 340:2003, Protective clothing

– General requirements; and IEC 61482-2:2009, Live working – Protective clothing against the

• Non-Stock: 4XL-6XL; Regular and Long

Female

• Stock: S-2XL; Regular and Long

• Non-Stock: XS, 3XL-4XL; Regular and Long

IMAGES - There currently is no image with agency customization. Example of color and style.

FLAME RESISTANT COVERALLS (SPEC BL008)

The garment shall be flame resistant long sleeve coveralls. This uniform item is designated as a CORE climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

• Female and male fit

• Two-way Nomex taped brass break-away zipper

• Nomex brass zipper on outside of leg from bottom to just below knee for ease of putting on over footwear

• Cotton/nylon blend

• Two front swing pockets

Two patch chest pockets with flaps

• Two patch hip pockets

• With minimum one sleeve pocket

• Side vents with snap closure

Female sizing – Petite, Regular and Tall

• Stock: Small – 2XL; Regular

• Non-Stock: XS-4XL; Petite and Tall

Male sizing – Short, Regular, Tall and X-Long

• Stock: Small –3XL; Regular and Tall

• Non-Stock: XSmall-6XL; Short, Regular, Tall and X-Long

IMAGES - Images are of current coveralls in tan, color change to navy.

FLAME RESISTANT INSULATED HOODED JACKET (SPEC BL009)

The garment shall be flame resistant insulated long sleeve brown hooded jacket. This uniform item is designated as a CORE item.

climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Non-conductive Nomex front zipper

• Permanently attached hood with adjustable drawcord

• Two large front side pockets

• Minimum two inside chest pockets

• Heavy weight 5.5 oz or greater insulation

• Quilt lined and last name) in light gray or tan thread. Nametag sewn on ¼’ above right pocket

Unisex – Regular and Long

• Non-Stock: XS; 4XL-6XL; Regular and Long

IMAGE - Image is of current Hooded Jacket in tan, change to navy.

FLAME RESISTANT PARKA (SPEC BL010)

The garment shall be flame resistant fully lined and insulated long sleeve parka. This uniform item is

• Parka shall be fully lined and insulated

• Water repellent

• The fit shall be comfortable and allow for full range of motion to include bending, reaching, climbing, squatting without coming apart at the seams

• Flame resistant - The garment must meet the requirements of current NFPA Standard on

Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, current

Edition

• True male and female fit

• Minimum of three large patch pockets with flaps

• Minimum one inside chest packet

• Minimum one sleeve pocket

• Nomex front taped brass zipper

Male Regular and Long

• Non-Stock: XS-4XL-6XL; Regular and Long

Female Regular

• Stock: S-XL; Regular

• Non-Stock: XS and 2XL Regular

IMAGE

FLAME RESISTANT FLEECE ZIP-UP JACKET (SPEC BL011)

The garment shall be flame resistant insulated long sleeve hooded jacket. This uniform item is climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Protection: Arc Rating ATPV 15 calories/cm2

• Female fit and features

▪ Two Zipper closure pockets

▪ Fishtail hem on female style

▪ Pencil pocket on sleeve

• Female fit and features

▪ Two Zipper closure pocket

▪ Chest pocket with zipper closure

▪ Pencil pocket on sleeve

• Male Style –small Bureau of Land Management emblem shall be sewn on the left upper front chest. Optional Nametag: Cloth navy blue name tag with embroidered name (first name or first initial and last name) in light gray thread. Nametag sewn on ¼’ above right pocket.

• Female Style - small Bureau of Land Management emblem shall be sewn on the left upper front chest. Optional Nametag: Cloth navy blue name tag with embroidered name (first name or first initial and last name) in light gray thread. Nametag sewn on ¼’ above right pocket.

Male – Regular and Long

• Non-Stock: 4XL-6XL; Regular and Long

Female – Regular and Long

• Non-Stock: XS, 3XL-4XL; Regular and Long

IMAGE - Examples of color and style, no images with customization available.

Male Style

Female Style

FLAME RESISTANT FLEECE FULL ZIP-UP HOODED SWEATSHIRT (SPEC BL012)

The garment shall be flame resistant full front zip hooded sweatshirt.

climbing, squatting without coming apart at the seams

• The garment must meet the requirements of current NFPA Standard on Flame-Resistant

Garments for Protection of Industrial Personnel Against Flash Fire, current Edition

• Zipper font

• Drawstring hood closure

• Two patch packets

• Hemmed or elastic sleeve and waist

• Optional Sewn on Nametag: Cloth navy blue name tag with embroidered name (first name or first initial and last name). Nametag sewn on ¼’ above right pocket.

Unisex – Regular and Long

• Non-Stock: 4XL-6XL; Regular and Long

IMAGE - Examples of color and style, no images with customization available.

FLAME RESISTANT HARD HAT LINER (SPEC BL013)

The garment shall be flame resistant hard hat liner.

• Worn in an outdoor environment under a hard hat.

• Cold weather insulated

• Flame resistant - The garment must meet the requirements of current NFPA Standard on

Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, current

Edition

• Protection: Arc Rating ATPV EBT 37 calories/cm2

• Hook and loop chain strap

• Nomex Aramid

• One size

FLAME RESISTANT KNIT HAT (SPEC BL014)

The garment shall be flame resistant knit stocking hat.

• Comfortable

• Flame resistant - The garment must meet the requirements of current NFPA Standard on

Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, current

Edition

• Protection: Arc Rating ATPV EBT 28 calories/cm2

• Navy, Ash Gray, or Black

• Double layers

• Fit to wear under hard hat

• Fabric must be flame resistant

• Small BLM emblem logo sewn on the front center of the hat or embroidery USBLM

Unisex - Medium and large

IMAGE - Photo of current version with BLM embroidered, change to sewn on emblem center front.

FLAME RESISTANT BALACLAVA (SPEC BL015)

The garment shall be flame resistant balaclava.

• Comfortable

• Flame resistant - The garment must meet the requirements of current NFPA Standard on

Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, current

Edition

• Protection: Arc Rating ATPV 9.6 cal/cm2

• Articulated face mask for varying degrees of coverage

• Double-layer face area or opening stretch to fit face

• Extra-long neck skirt

• Fit under a hard hat

• Fabric must be flame resistant

IMAGE - There is currently no image for the Flame-Resistant balaclava.

FLAME RESISTANT NECK GAITER (SPEC BL016)

The garment shall be flame resistant neck gaiter.

• Worn in an outdoor environment.

• Antimicrobial, breathable, odor resistant, and fast drying.

• Flame resistant - The garment must meet the requirements of current NFPA Standard on

Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire, current

Edition

• Protection: Arc Rating ATPV 9.6 cal/cm2

• Navy or Ash Gray

• Fabric must be flame resistant.

• “Bureau of Land Management” embroidered in font Roberto Regular or Bold, all caps using

100% cotton thread on the neck gaiter in a contrasting color (light gray on navy or navy on ash gray).

IMAGE - There is currently no image for the Flame-Resistant neck gaiter.

PERFORMANCE LIGHTWEIGHT HOODED SHIRT (SPEC BL017)

The garment is a long sleeve hooded lightweight performance shirt. The shirt can be worn as a stand-alone component or for layering under other long sleeve uniform components.

• Worn in year-round indoor and outdoor work environment

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a polyester performance material

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall have antimicrobial finish

• The fabric shall be fade resistant

• The fabric shall be snag resistant

• The fabric shall be wrinkle resistant

• The fabric shall shrink resistant

• The fabric shall provide UV sun protection

• Royal Blue

• Attached hood

• Labels - heat seal or tear away label

• UPF 35+

• BLM small heat transfer added to the upper front left chest

SIZE CHARACTERISTICST

• Stock: S-3XL

• Non-Stock: XS and 4XL

Female

• Stock: S-XL

• Non-Stock: XS,2XL-3XL

IMAGES

RIPSTOP WORK SHIRT (SPEC BL018)

The garment is a long and short sleeve ripstop work shirt.

• The fit shall be comfortable and allow for full range of motion

• The fabric content shall be a ripstop material

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall have antimicrobial finish

• The fabric shall be fade resistant

• The fabric shall be snag resistant

• The fabric shall be wrinkle resistant

• The fabric shall be stain-resistant

• The fabric shall shrink resistant

• The fabric shall provide UV sun protection

• Royal Blue

• Long and short sleeve

• Ripstop material

• Stain and wrinkle resistant

• Button-up

• Two button-thru or button flap front pockets

• Pen stall on one front pocket

• Non-break melamine dyed to match buttons

• Labels - heat seal or tear away label

• UPF 35+

• BLM small heat transfer added to the upper front left chest ¼” above pocket

• Stock: S-3XL;

• Non-Stock: XS and 4XL

• Stock: S-XL

• Non-Stock: XS,2XL-3XL

IMAGES - Examples of color and style, no images with customization available.

3-in-1 WINTER JACKET SYSTEM (SPEC BL019)

The garment is a 3-in-1 Winter Jacket System with outer shell with puffer or fleece jacket liner. This uniform item is designated as a CORE item.

• Worn in an outdoor winter work environment

• Shall performs in extreme cold climate from approximately 32° to -30°F

• The fit shall be comfortable and allow for full range of motion to include bending and reaching without coming apart at the seams.

• Shall be water and wind resistant

• Breathable

• True male sizing

• True female sizing

• Exterior jacket

▪ Wind resistant 1 CFM to 0 CFM

▪ Waterproof 20,000 mm

▪ Breathable 10,000 g/mm² to 20,000 g/mm²

• Interior jacket

▪ Wind resistant 10 CFM to 5 CFM

▪ Waterproof 15,000 mm

▪ Breathable 10,000 g/mm²

• Exterior and interior jacket UPF 35+

Detail Design

• Outer shell and Liner Options

• Full coverage, insulated hood with face shield or detachable storm hood

• Neck and chin guard

• Fleece lined outer shell

• Fully sealed seams and waterproof zippers

• Hand warmer pocket; front sipper pockets with garages or abrasion resistant hand pockets

• Contoured and/or adjustable hem

• Ergonomic zipper pulls

• Adjustable cuffs with closure

• Optional chest and/or sleeve pockets

• Puffer jacket liner

• Internal pockets

• DOI rocker and large agency patch on center top of right and left sleeve;

▪ Top of rocker shall be 1” below sleeve seam

▪ BLM triangle shall be below rocker with ½” distance between bottom center of the rocker and top of the BLM triangle

• Stock: Sizes XS – 4XL

• Stock: XS-2XL

IMAGES - This is a new item for the BLM uniform program and there is no image available.

PARKA (SPEC BL020)

The garment is a waterproof/breathable Parka to be worn in extreme cold climate conditions.

• Worn in an outdoor winter work environment

• Shall perform in extreme cold climate approximately 30° to -30°F

• Shall be water and wind resistant

• Snag resistant

• Breathable for moderate to high activity

• Wind Resistant 1 CFM or 0 CFM

• Waterproof 20,000 mm

• Breathability 10,000 g/mm² to 20,000 g/mm²

• UPF 35+

• Feather free thermal shell

• Thermal reflective lined

• Adjustable hood, may be detachable

• Insulated full coverage storm-flap

• Fully sealed seams and waterproof zippers

• Hand warmer pockets

• Internal rib cuffs and/or snow skirt

• Optional secured internal and/or sleeve pockets

• Stock: Sizes S – 3XL

• Non-Stock: 4XL-5XL

Female

• Non-Stock: XS

PACKABLE PUFFY JACKET (SPEC BL021)

The garment is a packable jacket. This uniform item is designated as a CORE item.

• Shall performs in a cold climate approximately 50° to 10°F

• Shall be water and wind resistant

• Shall be breathable

• Wind resistant 10 to 5 CFM

• Water Resistant 10,000 mm - 15,000 mm

• Breathable 20,000 g/mm²

• UPF 35+

• Feather free thermal shell

• Polyfill baffles

• Packable

• Full coverage attached hood

• Elastic cuffs

• Side zipper pockets and two internal pocket(s)

• Adjustable hem

• Stock: Sizes S – 3XL

• Non-Stock: 4XL-5XL

Female

• Non-Stock: XS

LIGHTWEIGHT HOODED JACKET (SPEC BL022)

The garment is a lightweight waterproof and breathable hooded jacket.

• Shall perform in a mild climate approximately 41° to 68°F

• Shall be water resistant approximately 5,000-10,000 mm

• Breathable approximately 3,000 - 8,000g/m2

• Waterproof and breathable outer shell

• Fully sealed seams

• Hooded with internal storm flaps or rollaway hood

• Packable

• Internal pockets

• Elastic cuffs with adjustable tabs

• Side zipper pockets

• Optional chest, sleeve or internal pockets

• Adjustable hem

• Stock: Sizes S – 3XL

• Non-Stock: 4XL-5XL

Female

• Non-Stock: XS, 3XL

MEN’S TRENCH OVER COAT (SPEC BL023)

Single-breasted trench coat to be worn year-round.

PERFORMANCE/WORK ENVIRONMENT

• Worn over dress uniform outdoors in inclement weather

• Trench coat shall be suitable for both summer and winter climate

• Classic trench coat with detachable Thinsulate lining

• Water repellent and crease resistant

• Dry clean

• Pantone must match female trench over coat.

• Navy Blue

• 65% polyester/35% cotton

• Zip-out removable Thinsulate liner

• Coat length below knee

• Button up with covered placket

• With or without belt

• Side pockets

• XS – 6XL

IMAGES – There currently are no images of a male trench over coat.

WOMEN’S TRENCH OVER COAT (SPEC BL024)

Single-breasted trench coat to be worn year-round.

PERFORMANCE/WORK ENVIRONMENT

• Worn over dress uniform outdoors in inclement weather

• Trench coat shall be suitable for both summer and winter climate

• Classic trench coat with detachable Thinsulate lining

• Water repellent and crease resistant

• Dry clean

• Pantone must match male trench over coat.

• Navy Blue

• 65% polyester/35% cotton

• Zip-out removable Thinsulate liner

• With or without hood

• Coat length below knee

• Button up with covered placket

• With or without belt

• Side pockets

• XXS-4XL

IMAGES – There currently are no images of a female trench coat.

HOODED RAINCOAT (SPEC BL025)

The garment is waterproof hooded raincoat.

• Worn in year-round outdoor work environment

• Shall perform in a mild climate approximately 41° to 68°F

• Easy on and off

• Fit over uniform

• Shall be 100% waterproof

• The fit shall be comfortable and allow for full range of motion

• Waterproof, 20,000 mm or more

• Wind resistant rating 10-5 CFM

• Interior breathability of 10,000 g/mm² to 20,000 g/mm²

• Long length that covers bottom

• Two zipper side pockets with cover flap snap closure or front flap snap pockets

• One or two interior zipper pockets

• Adjustable drawstring attached hood

• Attached hood with adjustable drawstring

• Extra high collar

• Underarm and back venting

• Adjustable hem and cuffs

• Sealed seams

• Pantone must match rain pants

• Stock: Sizes S – 3XL

• Non-Stock: 4XL-5XL

RAIN PANTS (SPEC BL026)

The garment is waterproof breathable rain pants.

• Worn in year-round outdoor work environment

• Easy on and off

• Fit over uniform

• Shall performs in a mild climate approximately 41° to 68°F

• Shall be 100% waterproof

• The fit shall be comfortable and allow for full range of motion

• Waterproof, 20,000 mm or more

• Wind resistant rating 10-5 CFM

• Interior breathability of 10,000 g/mm² to 20,000 g/mm²

• Elastic waist with adjustable drawstring

• Sealed seams

• Side zippered pockets and two large rear snap closure pockets

• Adjustable leg opening

▪ Easy on/off with any kind of footwear

▪ Zipper or snap closure with flap

• Pantone must match hooded raincoat

• Non-Stock: 4XL-5XL

Female

• Non-stock: XS, 3XL

WORK CANVAS CARGO SHORTS (SPEC BL027)

This garment is field work cargo shorts.

PERFORMANCE/WORK ENVIRONMENT SALIENT CHARACTERISTICS

• Worn in an outdoor work environment climbing, squatting without coming apart at the seams

• The fabric content shall be a cotton canvas material

• Shall resist tearing and ripping

• The fabric weight shall be suitable for all weather conditions

• The fabric shall be machine washable

• The fabric shall be colorfast fade resistant

• Stain resistant

• The shorts shall conform to true male sizing

• The shorts shall conform to true female sizing

• Charcoal/Dark Gray

STYLE CHARACTERISTCIS

• Cotton canvas stretch fabric

• Button and zipper closure

• Flat Front

• Two hip side and back pockets

• Two side pockets with flaps with snaps

• Utility loop and tool pockets

• Adequate number of belt loops with loops wide enough to accommodate program belt

• Ripstop capabilities to resist tearing and ripping

• Abrasion resistant material

• Reinforced stitching at throughout

• Gusseted and relaxed through seat and thigh

• Inseam length 9”-11” for male and female

• Stock: M-2XL

• Non-Stock: S, 3XL-6XL

• Non-Stock: XS, 3XL-4XL

IMAGES - There currently are no images of work cargo shorts in male and female fit.

BIB OVERALL (SPEC BL028)

The garment is an un-insulated bib overall.

climbing, squatting without coming apart at the seams

• The fabric content shall be a durable stretch ripstop performance material

• UPF 35-50 sun protection

• The fabric weight shall be suitable for summer weather conditions

• Reinforced stitching at high stress points (crotch, knees, armpits, etc.)

• The fabric shall be machine washable

• The fabric shall be colorfast and fade resistant

• The fabric shall be water and wind resistant

• True male and female sizing

STLYE CHARACTERISTICS

• Knee and crouch panels or gussets for mobility, bending and squatting ease

• Front bib zippered compartment large enough to fit plus size cell phone, flap pocket with snap closure, pencil, and sunglasses loop.

• Two lower front and back pockets

• Thigh cargo pocket with tuckable flap, utility pockets, and hammer/pruner loop

• Adjustable bib straps

• Triple-needle stitching

• 4-way stretch and abrasion resistant fabric

• Minimum 8.5” leg opening

• Straight leg and relaxed hip and thigh

• Double knees lined

• Small BLM patch or heat seal logo on center front pocket.

• Stock: M-2XL

• Non-Stock: S, 3XL-6XL

• Big sizing and long (tall) inseam up to 36”

Female

• Stock: S-2XL

• Non-Stock: XS, 3XL-4XL

• Inseam up to 36”

IMAGES - There currently are no images of un-insulated bib overalls in male and female fit.

U.S. DEPT. OF THE INTERIOR ROCKER PATCH (SPEC BL029)

Rocker emblem to be attached to various BLM uniform components and available for purchase. This uniform item is designated as a CORE item.

Worn on an indoor and outdoor setting

PMS CYAN MAGENTA YELLOW BLACK

349 100% 0% 100% 60%

310 50% 0% 10% 0%

PMS Color Values

• 349 - Border, Merrow Tree, and U.S Department of the Interior

• 310 - Base and Sky

• Border type; Rayon Hot Knife Border

• Backing Type: PVC

• Background Material: GS 688 Twill Material

• Emblem Type: 100% solid embroidery with sublimated green lettering

• Font – Roboto Regular or Roboto Bold

• Measurements indicated in image below

PATCH LOGO (SPEC BL030)

Bureau of Land Management logo to be attached to various BLM uniform components and available for purchase. This uniform item is designated as a CORE item.

• Worn indoor and outdoor setting

367 40% 0% 70% 0%

353 50% 0% 50% 0%

298 80% 10% 0% 0%

• 0 - Snow & National System of Public Lands

• 310 – Sky

• 298 - Mountains and Stream

• 349 - Border, Merrow Tree, and U.S Department of the Interior

• 353 – Foothills

• 367 - Grass

Component

• Patch

• Backing Type: PVC

• Two sizes

▪ Large 4.124” x 3.625”

▪ Small 2.875” x 2.5”

IMAGES - There currently are no image of a heat seal logo.

Large

Small

HEAT SEAL LOGO (SPEC BL031)

Bureau of Land Management logo to be attached to various BLM uniform components and available for purchase.

367 40% 0% 70% 0%

353 50% 0% 50% 0%

• 310 – Sky

• 298 - Mountains and Stream

• 349 - Border, Merrow Tree, and U.S Department of the Interior

• 367 - Grass

• Heat Seal

• Backing Type: PVC

• Small 2.875” x 2.5”

IMAGES - There currently are no image of a heat seal logo. Examples below for color and size.

PATCH VOLUNTEER LOGO (SPEC BL032)

Bureau of Land Management logo to be attached to various BLM Volunteer uniform components and available for purchase.

367 40% 0% 70% 0%

353 50% 0% 50% 0%

• 310 – Sky

• 298 - Mountains and Stream

• 349 - Border, Tree, and U.S Department of the Interior

• 367 – Grass

• Patch

• Backing Type: PVC

IMAGES - There currently is no image of a heat seal logo.

HEAT SEAL VOLUNTEER LOGO (SPEC BL033)

Bureau of Land Management logo to be attached to various BLM Volunteer uniform components and available for purchase.

367 40% 0% 70% 0%

353 50% 0% 50% 0%

• 310 – Sky

• 298 - Mountains and Stream

• 349 - Border, Tree, and U.S Department of the Interior

• 367 – Grass

• Heat Seal

General Instructions

• Backing Type: PVC

• Font – Futura Bold

IMAGES - There currently are no image of a heat seal logo.

PATCH RANGER BADGE (SPEC BL034)

Bureau of Land Management Ranger badge to be attached to various BLM Law Enforcement uniform components and available for purchase. This uniform item is designated as a CORE item.

• Worn on an indoor and outdoor setting

• Thread colors

▪ New Ronglida D70069

▪ Ming Shyang D422, D70069 and PF3685

▪ FF D422

• Border type: Hot Knife Border

• Backing Type: PVC

• Background Material: Chulin 962 Material

• Emblem Type: 100% solid embroidery

• Two Sizes

▪ Small - 2 ⅛” x 3 ¼”

▪ Large - 3” x 4 ½”

PATCH SPECIAL AGENT BADGES (SPEC BL035)

Bureau of Land Management Special Agent badge to be attached to various BLM Law Enforcement uniform components and available for purchase. This uniform item is designated as a CORE item.

• Thread colors

▪ New Ronglida D70069

▪ Ming Shyang D422, D70069 and PF3685

▪ FF D422

• Border type: Hot Knife Border

• Backing Type: PVC

• Background Material: Chulin 962 Material

• Emblem Type: 100% solid embroidery

• Two Sizes

▪ Small - 3 ¼” x 2 ⅛”

▪ Large - 3” x 4 ½”

SERVING SINCE PLATE (SPEC BL036)

Serving since tab to be attached to pinback nameplate.

• Gold

• Brass

• Year date to be engraved

LAW ENFORCEMENT HYBRID PERFORMANCE POLO (SPEC BL037)

The BLM seeks consistency of style and fit in the long and short sleeve hybrid performance polo.

The images provided below are the currently available images of long and short sleeve performance polo shirts. With the exception of the color characteristics and customization indicated below, the long sleeve hybird performance polo shirts for BLM should be consistent under this specification.

This uniform item is designated as a CORE item.

• The fabric content shall be a polyester performance material

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall have anti-odor finish

• The fabric shall be fade resistant

• The fabric shall be snag resistant

• The fabric shall be wrinkle resistant

• The fabric shall shrink resistant

• The fabric shall be stain resistant

• The fabric shall provide UV sun protection

• The polo shirt shall conform to true male sizing

• The polo shirt shall conform to true female sizing

• Tan/khaki

▪ Tan fabric pantone must match LE tactical shorts, pants and performance polo

• Long and short sleeve

• No curl collar with collar stays

• Running gusset for range of motion

• Breathable underarm panel

• Woven sleeve cuffs with melamine buttons

• Three button front closure with mic/pen/sunglass loop at bottom

• Polyester/Cotton ripstop material

• Longer body length

Law Enforcement

• Official BLM small Ranger or Special Agent badge on left chest

▪ Badge to be placed 2 ½” to the left of the outside of the center button placket

• Right front chest

▪ Optional direct embroidery, brown thread or first initial and last name, all caps

• Left and right sleeve shall have rocker and large BLM triangle patch

▪ Top of rocker shall be 1” below sleeve seam

• Stock: Regular S - 2XL; Tall L - 2XL

• Non-Stock: Regular XS, 3XL-5XL; Tall 4XL-5XL (2” longer in body and sleeve length)

Female

• Stock: Regular S – 2 XL

• Non-stock: XS, 3XL

Ranger Special Agent

Male – Long Sleeve

Female – Long Sleeve

Male – Short Sleeve

Female – Short Sleeve

TACTICAL SHORT (SPEC BL038)

The garment is a cargo-style short made of fabric in a rip-stop weave.

The images provided below are the currently available images of tactical short.

climbing, squatting without coming apart at the seams

• Reinforced stitching and/or gusseting at high stress points (crotch, knees, etc.)

• The fabric content shall be a durable performance material blend utilizing a rip-stop weave

• The fabric weight shall be suitable for all weather conditions including warm/hot and humid, breathable and possess moisture wicking capabilities

• The fabric shall be machine washable

• The fabric shall be colorfast and resist stains

• The fabric shall provide UV sun protection

• The pant shall conform to true male sizing

• The pant shall conform to true female sizing

• Tan/khaki

▪ Tan fabric pantone must match LE tactical shorts, pants and performance polo

• Fabric pantone should match tactical shirts and polos

• Fabric with two-way mechanical stretch

• Stain repellent finish

• Double dyed fabric

• Ripstop fabric

• Comfort stretch waistband

• Enhanced pocket that includes gusset at the bottom to ensure ample space

• Knife pocket garage

• Gusset construction

• Triple needle stitching

• 11” Inseam

• Regular – 28-44

• Regular 0-20

WOMEN’S DRESS SHIRT (SPEC BL039)

This dress shirt is long sleeve, collared with a traditional flattering silhouette fit and a covered placket.

• Worn in year-round indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall be stain-resistant and release soil

• The fabric shall be wrinkle resistant

• The fabric shall be machine washable

• Pantone must match male dress shirt

• White

• Long sleeve

• 100% polyester 3.5/3.75 oz. wt.

• 2 ½” collar points and permanent stays

• Button-up with covered placket

• Front and back darts with princess seams

• Straight back yoke

• No pocket

• Two-button adjustable cuff

• Scotchguard™ finish for stain release

• Winkle resistant and moisture wicking.

• Machine washable

• XXS - 4XL

MEN’S DRESS SHIRT (SPEC BL040)

This dress shirt is long sleeve, collared with a traditional flattering silhouette fit and a covered placket.

• Worn in year-round indoor and outdoor environment

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be machine-washable

• The fabric shall be stain-resistant and release soil

• The fabric shall be wrinkle resistant

• The fabric shall be machine washable

• Pantone must match female dress shirt

• White

• Long sleeve

• 100% polyester 3.5/3.75 oz. wt.

• 2 ½” collar points and permanent stays

• Button-up

• Traditional placket with matching buttons

• Straight back yoke

• Left chest pocket

• Two-button adjustable cuff

• Scotchguard™ finish for stain release

• Winkle resistant and moisture wicking.

• Machine washable

• S - 3XL

• Tall L - 6XL

SUIT COAT (SPEC BL041)

The garment will be part of a formal dress uniform. This uniform item is designated as a CORE item.

PERFORMANCE/WORK CHARACTERISTICS

• Worn in an indoor and outdoor work environment

• Machine washable or dry clean

• Wrinkle resistant

• The fit shall be comfortable and allow for full range of motion

• Shall conform to true male sizing

• Shall conform to true female sizing

• 54% Polyester/44% Wool/2% Spandex blend

• Pantone must match dress pants and skirt

• Tailored fit that falls just below hips

• Machine washable or dry clean fabric

• Two buttoned narrow notched lapels

• Two lower front pockets; upper welt pocket, inside watch pocket or 2 lower inside pockets

• Fully lined

• Vented back

• DOI rocker and large agency patch on center top of right and left sleeve

• Stock: S – 2XL Regular, Short and Tall

• Non-Stock: Regular and Tall 3XL-5XL; Short S-XL

Female

• Stock: S-XL Regular and Tall

• Non-stock: Regular XXS-XS, 2XL-4XL and Tall XS, 2XL

IMAGE - There currently is no images of suit coat with agency customization.

Examples, male and female

DRESS PANTS (SPEC BL042)

The garment will be part of a formal dress uniform. This uniform item is designated as a CORE item.

• Wrinkle resistant

• The fit shall be comfortable and allow for full range of motion

• Shall conform to true male sizing

• Pantone must match suit coat and skirt

• Machine washable or dry clean fabric

• Two front pockets and two buttoned back welt pockets

• Hook/bar closure

• Belt loops wide enough to fit agency dress belt

• Mid-rise, sits below natural waist

• Tailored straight fit, flat front

• Stock: M – 5XL

• Non-stock: S,

• Inseam: 26-33, 34 unhemmed; Tall 35, 36 unhemmed

Female

• Stock: S-XL

• Non-stock: Size XXS, XS, 2XL-4XL

• Inseam 25”-35” unhemmed

Example of male and female dress pants.

DRESS SKIRT (SPEC BL043)

The garment will be part of a formal dress uniform.

• Wrinkle resistant

• Pantone must match suit coat and dress pants

• Washable or dry clean fabric

• Drop contoured waistline

• Tailored straight skirt

• Contoured waistband

• Center back hidden zipper

• No pockets

• Rear kick pleat

• Fully lined

• Stock: S-XL (6/8-18/20)

• Non-stock: Size XXS-XS (00/0-2/4), 2XL-4XL (22/24-30-3)

Example of dress skirt.

4-in-1 Tie (SPEC BL044)

The tie will be worn as part of the male dress uniform. This uniform item is designated as a CORE

• Dry clean ow machine wash

• Herringbone weave

• Light Blue

• 100% Polyester

• Pantone must match female neckerchief and clip on ties

• Dry clean or Machine washable

• 58” L x 3.75” W

One size

Neckerchief Tie (SPEC BL045)

The neckerchief will be worn as part of the female dress uniform. This uniform item is designated as a

CORE item.

• Dry clean ow machine wash

• Herringbone weave

• Light Blue

• 100% Polyester

• Pantone must match 4-in-1 and clip-on ties

• Dry clean or machine washable

• Pre-tied adjustable knot

One size

WESTERN HAT (SPEC BL046)

The BLM seeks consistency of style and fit in Western Style Felt Hat. The image provided below is the current image of the existing standard.

Stratton Low Rider Style Western hat, with hat band, style WLW-BR10 or equal.

• Worn in hot and/or sunny environments

COLOR

• Brown – Law Enforcement

• Light Gray - General

• Crown Height: 4 to 4 ½”

• Brim: 4 ¼” to 4 ½”

• X Factor Rating: 7X -10X

• Crown style: Center crease with long side dents or Cowboy crown

• Satin lining inside of the crown

• The material shall be genuine wild fur or wool

Non-Stock Item

• Regular Oval - 6 1/2 through 7 7/8, in 1/8" increments

• Long Oval - 6 1/2 through 7 7/8, in 1/8" increments

• Extra Long Oval - 6 1/2 through 7 7/8, in 1/8" increments

• Wide Oval - 6 1/2 through 7 7/8, in 1/8" increments

There is currently no example of a light gray hat.

TRUCKER MESH BACK BALL CAP (SPEC BL047)

The BLM seeks consistency of style and fit Baseball style cap (Richardson 112). The image provided below is the current image of the existing standard and examples.

• Worn in inclement weather

• Tan and Brown - Volunteer

• Ash/Light/Heather Gray - General

• Navy – Wildland Fire & Aviation

• Adjustable snapback closure

• Low to mid profile

• Pre-curved visor

• Cotton sweatband

• Ash/light Gray - Small BLM patch added on the front center of the cap

• Navy - Small BLM patch added on front center of the cap with ‘FIRE” embroidered ¼” above patch in red thread

• Small/Medium 6 ½-7)

• Medium/Large (7 – 7 ¾)

• XL (7 ¼ - 7 7/8)

General and Wildland Fire & Aviation - There currently are no images of ball cap with agency customizations.

(Navy Example image Richardson Hat 112)

PERFORMANCE BALL CAP (SPEC BL048)

Baseball style cap, adjustable back-strap. The image provided below is of previous standard and examples.

• Light or Ash Gray

• Hook and loop or adjustable snapback closure

• Low to mid profile

• Pre-curved visor

• Water Repellent

• UPF/Sun Protection

• Stay-dry sweatband

• Packable

• Floatable

• Small BLM patch added on the front center of the cap

• Small/Medium 6 ½-7)

• Medium/Large (7 – 7 ¾)

• XL (7 ¼ - 7 7/8)

There currently is no image of ball cap with agency customization. Example image only.

MERINO WOOL CUFF BEANIE (SPEC BL049)

The garment is a Merino wool beanie. This uniform item is designated as a CORE item.

• Worn in cold environments

• Lightweight, comfortable and packable

• Ash/Light/Heather Gray - General

• Navy – Wildland Fire

• Double layer merino wool

• Cuffed beanie

• Tear-away label

• Itch free

• Moisture Wicking

• Anti-microbial

• Odor Resistant

• UPF rating 50+

• Machine wash and dry

• Gray - Small BLM patch or direct embroidery added on the front center of the cap

• Navy - Small BLM patch or direct embroidery added on front center of the cap with ‘FIRE” embroidered ¼” above patch in red thread

• Small/Medium

• Medium/Large

• Large/XL

• XXL

SOFTSHELL DUTY JACKET (Spec BL050)

The garment is a Softshell Layertech Jacket. This uniform item is designated as a CORE item.

• Worn as an outer layer in an outdoor work environment

• Perform in a mild climate from approximately 41° to 65°F

• The fit shall be durable, comfortable and 4-way stretch for full range of motion

• The fabric weave shall be wind and water resistant

• The fabric weave shall be breathable and possess moisture wicking capabilities

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The fabric shall be colorfast and resist fading, shrinking and pilling

• The jacket shall be unisex

• Brown

• Breathable, wind and water resistant

• Polyester and two-way stretch spandex

• Polyester fleece lined

• Two front lower pockets with zipper closures

• One to two upper vertical pockets with zipper closures

• Comfort cuffs with knit stretch

• Mic and cam tab

• Side vents with zippers and snap elastic tab closure

• Full zip through stand-up storm flap collar with chin guard

• Law Enforcement

▪ Rocker and agency patch on upper top center of right and left sleeve;

▪ Ranger or Special Agent Law Enforcement badge on upper left front

▪ Optional right chest direct embroidery name; first initial and last name or first and last name; tan thread

• Non-Stock: XS, 4XL-6XL

• Body Length: Regular and Long

IMAGES - This is a new item for the BLM uniform program and there is no image with customization. Image is for jacket design

STORMFORCE WATERSHED GORE-TEX DUTY JACKET (Spec BL051)

The garment is a Watershed Gore-Tex Duty Jacket. This uniform item is designated as a CORE item.

• Worn as an outer layer in an outdoor work environment

• Worn over body armor

• Worn above duty belt

• The fabric weave shall be WaterShed® rainwear

• The fabric weave shall be breathable

• The fabric shall be anti-microbial/odor resistant

• The fabric shall be stain and snag resistant

• The fabric should be machine washable

• The jacket shall be unisex

• Dark Brown

• 3-Layer Gore-Tex

• Fleece lined stand up collar

• Full zip through stand-up storm flap collar with chin guard

Front snap flap cover over zipper

• Detachable snap on hood

• Two front pockets with flaps and pen stalls

• Upper zippered sleeve pockets

• Inside pocket

• Hand warmer pockets with zipper closure

• Velcro cuffs

• Mic and body cam tabs

• Side vents with zippers

• Law Enforcement

▪ Rocker and agency patch on upper top center of right and left sleeve;

▪ Ranger or Special Agent Law Enforcement badge on upper left front

▪ Optional right chest direct embroidery name; first initial and last name or first and last name; tan thread

• Stock: Sizes S – 3XL

• Non-Stock: XXS-XS, 4XL-6XL

• Body Length: 20” – 36”

IMAGES - This is a new item for the BLM uniform program and there is no image with customization. Image is for jacket design only.