Attachment 8 Drawings 521-21-106_Part3.pdf
PDF 9 MB Posted
- Attached to
- Y1DA--521-21-106 | Medical Gas Systems
- Solicitation number
- 36C24725R0020
About this file
These are architectural and engineering drawings for a medical gas systems project at the Birmingham VA Medical Center, focusing on demolition and new construction plans across multiple floors. The drawings detail the phasing and installation of medical gas systems, including zone valve boxes, alarm panels, and piping layouts on the 4th, 6th, 8th, and 9th floors.
The drawings include detailed specifications for infection control risk assessment (ICRA) requirements with three types of barrier systems (Type I Hardwall, Type II Softwall, and Mobile Containment Cart), equipment pad details, and specific instructions for medical gas cylinder storage. Key features include phasing plans showing contractor access routes, demolition notes, new construction requirements, and detailed sketches for signage placement. The drawings also contain general notes regarding contractor responsibilities for maintaining infection control measures, dust control, and coordination with VA staff during construction activities.
View the file
Other files
Show all 29
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
AP 5-2
CONDITION A
ICRA TYPE I
HARDWALL
REFERENCE SHEET A-12
AP 5-1
ICRA TYPE I
HARDWALL
REFERENCE SHEET A-12
AP 5-3
CONDITION C
ICRA TYPE II
SOFTWALL
REFERENCE SHEET A-12
5TH FLOOR PARTIAL ENLARGED PLAN
5TH FLOOR PARTIAL ENLARGED PLAN
5TH FLOOR PARTIAL ENLARGED PLAN
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
BIRMINGHAM
VA MEDICAL
CENTER
U.S. Department of Veterans Affairs
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Project Director
Revisions: Date:
AutoCAD SHX Text
STORAGE 5105
AutoCAD SHX Text
ZVB-5-2
AutoCAD SHX Text
AP-5-2
AutoCAD SHX Text
ZVB-5-1
AutoCAD SHX Text
AP-5-1
AutoCAD SHX Text
STORAGE 5225
AutoCAD SHX Text
ZVB-5-3
AutoCAD SHX Text
AP-5-3
AutoCAD SHX Text
FIFTH FLOOR ENLARGED ICRA PLANS
AutoCAD SHX Text A-07
AutoCAD SHX Text
AB
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PLANS AP-5-2 AND ZVB-5-2
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS AP-5-1 AND ZVB-5-1
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS AP-5-3 AND ZVB-5-3
AutoCAD SHX Text
AutoCAD SHX Text N1. INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) 58" TYPE "X" GWB) OVER 3-5/8" METAL STUD FRAMING AT 16" O.C.), EXTEND ASSEMBLY 4" ABOVE FINISH CEILING. N2. PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH ADJACENT CONSTRUCTION. SEE GI DRAWINGS FOR EXTENT OF PAINTING NOTE: "NEW WALL FINISH" N3. REINSTALL METAL CORNER GUARD. REINSTALL METAL CORNER GUARD. N4. REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REPAIR AND REPLACE TILE AND GRID AS REQUIRED. N5. INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO MATCH ADJACENT CONSTRUCTION. N6. P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED IN WALL. (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N7. THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N8. NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N9. NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER FINISH, PAINT AND CMU WALL ASSEMBLY TO MATCH ADJACENT CONSTRUCTION. N10. INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING CONSTRUCTION. PAINT TO MATCH ADJACENT CONSTRUCTION. N11. P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION UNIT (TRANSDUCERS ARE PART OF THE ZVB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N12. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. N13 E.C TO PROVIDE NEW ELECTRICAL CONDUIT FOR TRANSDUCER WIRE & OPEN AIR WIRE ON J-HOOKS; SEE ELECTRICAL WORK SCOPE. N14. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE FROM ZVB AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE. N15. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE TO REMOTE ALARM PANEL AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE.. N16 . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH NO TRANSDUCERS); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N17. PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING CONSTRUCTION. N18. INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N19 P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N20. INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO CORNER AND UNISTRUT TANK SUPPORT PAINT ALL WALLS WITH URETHANE PAINT; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. N21 INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. COORDINATE LOCATION WITH COR. N22. INSTALL NEW SUSPENDED 24" X 48" WASHABLE INSTALL NEW SUSPENDED 24" X 48" WASHABLE ACOUSTICAL CEILING ASSEMBLY AT SAME HEIGHT AS ORIGINAL CEILING. N23. NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT FINISH) TYPE TO MATCH ADJACENT CONSTRUCTION. N24. PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR FRAMES WITHIN THE NOTED AREA TO RECEIVE NEW PAINT ALL SIDES MATCH EXISTING COLOR. N25. PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO MATCH EXISTING. N26. CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS (DASHED AREA) WITH WASHABLE URETHANE PAINT. PAINT FLOORS AND EQUIPMENT PAD WITH EPOXY. REFER TO LIFE SAFETY PLAN KEYNOTE #4. N27. THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING WORK SCOPE. N28. REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REQUIRED FOR PLUMBING NEW LINES. REPLACE WITH MATCHING MATERIALS, NO EXPOSED FASTENERS. SEE 2 / A-13 THE VAMC REQUIRES ALL ROOMS DESIGNATED FOR TURNOVER TO THE CONTRACTOR TO BE RETURNED IN A CLEAN STATE. CREATE A SCHEDULE THAT INCLUDES TASKS FOR THE VAMC TO MOVE OUT AND TASKS FOR THE CONTRACTOR TO MOVE IN. ADDITIONALLY, PROVIDE TWO REPORTS EACH MONTH - ONE FILTERED TO ONLY SHOW THE VAMC MOVING TASKS AND ANOTHER FOR VAMC CLEANING TASKS. IF THE MOVING DATE CHANGES BY MORE THAN 1 DAY, SEND AN UPDATED REPORT TO THE COR. THE VAMC WILL PERFORM SURGICAL CLEANING AFTER ACCEPTANCE OF THE O.R. SPACES.
AutoCAD SHX Text
EXISTING CONSTRUCTION NOTES
AutoCAD SHX Text E1. EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING DEMOLITION WORK, PREP AS REQUIRED FOR NEW WALL FINISH. E2. THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS TO THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS TO REMAIN AND SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE DAMAGED TILES AND GRID ASSEMBLY AS NEEDED. E3. PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME RETARDANT SURFACE PROTECTION. TAPE SEAMS AND EDGES. (BASIS OF DESIGN: TRIMACO AQUA SHIELD) E4. EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO SHEET EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO SHEET EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E5. EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO DETAIL 1/A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E6. EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. E7. EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP AS EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP AS REQUIRED FOR NEW FINISH. PHOTOGRAPH BOTH SIDES OF THE WALLS BEFORE STARTING WORK. E8. EXISTING HANDRAIL TO REMAIN. EXISTING HANDRAIL TO REMAIN. E9 EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW WALL EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW WALL ASSEMBLY; SEE THE ELECTRICAL WORK SCOPE. E10. EXISTING DOOR TO REMAIN LOCKED DURING DEMOLITION AND NEW CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E11. EXISTING CONTROL PANEL TO REMAIN. EXISTING CONTROL PANEL TO REMAIN. E12 DOOR LEAF TO REMAIN CLOSED DURING CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E13. EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, SUSPEND ITEMS IN PLACE. PROVIDE ADDITIONAL HANGER SUPPORTS AS REQUIRE. REINSTALL ITEMS INTO NEW ACOUSTICAL CEILING. E14. EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING. E15. EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, G.C. EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, G.C. TO CLEAN LIGHTING AND DIFFUSERS. E16. EXISTING NITROGEN CONTROL BOX (NCB) TO BE REPLACED. REFER TO PLUMBING DRAWINGS FOR ADDITIONAL INFORMATION. SEE DETAIL 2/A-13 WHEN POSSIBLE MAKE REPAIRS FROM CORRIDOR SIDE OF WALL. E17. EXISTING BOLLARDS AND METAL BOX
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D1. REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. PREP AREA FOR NEW WALL ASSEMBLY. D2. REMOVE WALL BASE. REMOVE WALL BASE. D3. REMOVE/REINSTALL METAL CORNER GUARDS. REMOVE/REINSTALL METAL CORNER GUARDS. D4. PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL CEILING; PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL CEILING; SEE PLUMBING AND ELECTRICAL WORK SCOPE. CEILING SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE ASSEMBLY AS NEEDED. D5. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. D6. P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D7. P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D8. P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP PANEL P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP PANEL IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D9. P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB BOX IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D10. ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D11. ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D12. WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER ENTRANCE. D13. REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D14. REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D15. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. D16. VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, ARTWORK, VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, ARTWORK, MARKERBOARDS, ETC..) D17. EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE OFF EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE OFF THE DOOR WITH 1HR-RATED PLASTIC. INSTALL TEMPORARY SIGNAGE. D18. REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL WALLS REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL WALLS AND FRAMES FOR NEW FINISHES, REFER TO DETAIL 1/A-14. REMOVE EXISTING SUSPENDED CEILING ASSEMBLY AND INSTALL NEW SUSPENDED CEILING ASSEMBLY. D19. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. D20. INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE DECK; INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE DECK; REMOVE AT THE END OF EACH PHASE. NOTE: THE INTEGRITY OF TEMPORARY CEILING ASSEMBLY NEEDS TO BE MAINTAINED DURING CONSTRUCTION. D21. REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. INSTALL 5/8" TYPE X FIRE RATED CEILING WHEN EMPLOYEES ARE NOT ACTIVELY WORKING. INSTALL FIRE RATED PLASTIC ABOVE CEILING AS NEEDED FOR ICRA TO MAINTAIN CORRECT ROOM PRESSURES. D22. REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING AND REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. SEE DETAIL 2 / A-13 ALSO COORDINATE WITH THE COR IN EACH OPERATING ROOM TO GET UP TO TWO S.F. OF ADDITIONAL SOLID SURFACE REMOVAL AND REPAIR / FIXES TO EXISTING.
AutoCAD SHX Text
NEW CONSTRUCTION NOTES
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D23. VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO THE CONSTRUCTION CORRIDOR AND SELECT ROOMS. CONTRACTOR TO CONSTRUCT, CLEAN AND MAINTAIN A CHANGING AREA FOR THE VA STAFF TO RETURN TO A STERILE ENVIRONMENT. THE CONTRACTOR IS TO PROVIDE A HEPA FILTRATION SYSTEM TIED TO THE EXHAUST OR RETURN DIFFUSERS, CLEAN CORRIDORS FREE OF ANY HAZARDS, AND PROVIDE TRAINING TO THE VA STAFF TO ACCESS THE CONSTRUCTION SPACE G.C. TO PROVIDE A WARDROBE CABINET WITH SHELVES (SEE MCMASTER-CARR BEIGE 9705T17 AS BASIS OF DESIGN). VA WILL PROVIDE VA PERSONAL PPE SUPPLIES AND A CHAIR. D24. REMOVE EXISTING ALARM PANEL (AP) AND PATCH WALL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D25. REMOVE METAL FRAME WORK. PATCH WALLS. D26. REMOVE (2) EQUIPMENT PADS. RETURN FLOOR TO SMOOTH FINISH. D27. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. D28. REMOVE AND REPLACE EXISTING NITROGEN CONTROL BOX (NCB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. D29. RELOCATING ZVB VALVE TO A NEW LOCATION; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D30. REMOVE METAL BOX AND PATCH WALLS AS NEEDED. COORDINATE WITH PLUMBING CONTRACTOR.
AutoCAD SHX Text
BID DOCUMENTS FOR CONSTRUCTION
AutoCAD SHX Text
FULLY SPRINKLERED
AutoCAD SHX Text
REPLACE/UPGRADE MEDICAL GAS SYSTEM
AutoCAD SHX Text 521-21-106
AutoCAD SHX Text 07-07-2023
AutoCAD SHX Text
700 S. 19TH STREET, BIRMINGHAM, AL 35233
AutoCAD SHX Text
BIRMINGHAM VA MEDICAL CENTER
AutoCAD SHX Text
AutoCAD SHX Text
BVG
AP 6-1
ICRA TYPE II
REFERENCE SHEET A-12
AP 6-1A
ICRA TYPE I
REFERENCE
SHEET A-12
VAMC NOTE:
ROOM 6136 TO BE VACATED AND
TURNED OVER TO THE
CONTRACTOR
GC NOTE:
CONTRACTOR TO INSTALL NEW
UNIT NEXT TO OLD UNIT WHILE
ALLOWING ACCESS TO THE OLD
UNIT. BARRIER MAY CHANGE AS
PROGRESS BEING MADEOLD ZVB 6-1B, ZVB 6-1C
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
VAMC NOTE:
ROOMS 6101, 6332A, AND 6333A TO
BE VACATED AND TURNED OVER TO
THE CONTRACTOR.
VAMC TO REMOVE ART WORK
NEW ZVB 6-1B
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
SIZE NEW ZVB-6-1B TO TAKE THE
PLACE OF THE OLD ZVB-6-1A AND
ZVB-6-1B
AP 6-2
CONDITION A
ICRA TYPE II
REFERENCE SHEET A-12
OLD ZVB-6-3
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
VAMC NOTE:
ROOMS 6325, AND 6326A TO BE
VACATED AND TURNED OVER TO
THE CONTRACTOR.
GC NOTE:
EXISTING PANEL ZVB6-3 WILL BE
REMOVED AFTER THE PANEL
INSTALLED IN NEW LOCATION
NEW ZVB-6-3
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
G.C. NOTE:
COORDINATE LOCATION WITH
EXISTING AP. KEEP EXISTING AP
OERATIONAL UNTIL NEW AP IS
WORKING THEN DEMO OLD AP.
MAINTAIN STAFF ACCESS TO PANEL
ZVB-6-4
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
VAMC NOTE:
ROOMS 6314 & 6316 TO BE
VACATED AND TURNED
OVER TO THE CONTRACTOR
INSTALL ELECTRIC
TO REMOTE
LOCATED ALARM
PANEL
TUCK POINT CMU USING
TYPE N MORTAR
ABOVE CEILING 20 LF.
BY 3' BOTH SIDES OF
WALL. COORDINATE WITH
COR.
ZVB-6-5
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
BARRIER MAY NEED
MODIFIED TO ALLOW
STAFF ACCESS.
VAMC NOTE:
ROOMS 6325, AND 6326A TO BE
VACATED AND TURNED OVER TO
THE CONTRACTOR.
GC NOTE:
EXISTING PANEL ZVB6-3 WILL BE
REMOVED AFTER THE PANEL
INSTALLED IN NEW LOCATION
AP 6-3
CONDITION B (ALARM
PANEL ONLY)
ICRA TYPE I
REFERENCE SHEET A-12
VAMC NOTE:
ROOM 6321 TO BE VACATED
AND TURNED OVER TO THE
CONTRACTOR
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN6TH FLOOR PARTIAL ENLARGED PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
BIRMINGHAM
VA MEDICAL
CENTER
U.S. Department of Veterans Affairs
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Project Director
Revisions: Date:
AutoCAD SHX Text
AP-6-1
AutoCAD SHX Text
ZVB-6-1A
AutoCAD SHX Text
ZVB-6-1A
AutoCAD SHX Text
ZVB-6-1B
AutoCAD SHX Text
ZVB-6-1C
AutoCAD SHX Text
ZVB-6-1B
AutoCAD SHX Text
STORAGE 6225
AutoCAD SHX Text
AP-6-2
AutoCAD SHX Text
ZVB-6-3
AutoCAD SHX Text
ZVB-6-3
AutoCAD SHX Text
AP-6-3
AutoCAD SHX Text
ZVB-6-4
AutoCAD SHX Text E12
AutoCAD SHX Text
ZVB-6-5
AutoCAD SHX Text
BREAK RM 6136
AutoCAD SHX Text
ZVB-6-1A
AutoCAD SHX Text
ZVB-6-3
AutoCAD SHX Text
ZVB-6-3
AutoCAD SHX Text
AP-6-3
AutoCAD SHX Text E12
AutoCAD SHX Text
ZVB-6-4
AutoCAD SHX Text
AP-6-4
AutoCAD SHX Text
ZVB-6-5
AutoCAD SHX Text
SIXTH FLOOR ENLARGED ICRA PLANS
AutoCAD SHX Text A-08
AutoCAD SHX Text
AB
AutoCAD SHX Text
BVG
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP-6-1
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-1A
AutoCAD SHX Text 2A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS ZVB-6-1B AND ZVB-6-1C
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP 6-2
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-3
AutoCAD SHX Text 5A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP-6-3
AutoCAD SHX Text 6B
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-4
AutoCAD SHX Text 7A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-5
AutoCAD SHX Text 8A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-1A
AutoCAD SHX Text 2B
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-3
AutoCAD SHX Text 5B
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP-6-3
AutoCAD SHX Text 6A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-4
AutoCAD SHX Text 7B
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-5
AutoCAD SHX Text 8B
AutoCAD SHX Text N1. INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) 58" TYPE "X" GWB) OVER 3-5/8" METAL STUD FRAMING AT 16" O.C.), EXTEND ASSEMBLY 4" ABOVE FINISH CEILING. N2. PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH ADJACENT CONSTRUCTION. SEE GI DRAWINGS FOR EXTENT OF PAINTING NOTE: "NEW WALL FINISH" N3. REINSTALL METAL CORNER GUARD. REINSTALL METAL CORNER GUARD. N4. REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REPAIR AND REPLACE TILE AND GRID AS REQUIRED. N5. INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO MATCH ADJACENT CONSTRUCTION. N6. P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED IN WALL. (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N7. THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N8. NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N9. NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER FINISH, PAINT AND CMU WALL ASSEMBLY TO MATCH ADJACENT CONSTRUCTION. N10. INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING CONSTRUCTION. PAINT TO MATCH ADJACENT CONSTRUCTION. N11. P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION UNIT (TRANSDUCERS ARE PART OF THE ZVB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N12. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. N13 E.C TO PROVIDE NEW ELECTRICAL CONDUIT FOR TRANSDUCER WIRE & OPEN AIR WIRE ON J-HOOKS; SEE ELECTRICAL WORK SCOPE. N14. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE FROM ZVB AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE. N15. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE TO REMOTE ALARM PANEL AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE.. N16 . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH NO TRANSDUCERS); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N17. PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING CONSTRUCTION. N18. INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N19 P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N20. INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO CORNER AND UNISTRUT TANK SUPPORT PAINT ALL WALLS WITH URETHANE PAINT; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. N21 INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. COORDINATE LOCATION WITH COR. N22. INSTALL NEW SUSPENDED 24" X 48" WASHABLE INSTALL NEW SUSPENDED 24" X 48" WASHABLE ACOUSTICAL CEILING ASSEMBLY AT SAME HEIGHT AS ORIGINAL CEILING. N23. NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT FINISH) TYPE TO MATCH ADJACENT CONSTRUCTION. N24. PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR FRAMES WITHIN THE NOTED AREA TO RECEIVE NEW PAINT ALL SIDES MATCH EXISTING COLOR. N25. PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO MATCH EXISTING. N26. CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS (DASHED AREA) WITH WASHABLE URETHANE PAINT. PAINT FLOORS AND EQUIPMENT PAD WITH EPOXY. REFER TO LIFE SAFETY PLAN KEYNOTE #4. N27. THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING WORK SCOPE. N28. REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REQUIRED FOR PLUMBING NEW LINES. REPLACE WITH MATCHING MATERIALS, NO EXPOSED FASTENERS. SEE 2 / A-13 THE VAMC REQUIRES ALL ROOMS DESIGNATED FOR TURNOVER TO THE CONTRACTOR TO BE RETURNED IN A CLEAN STATE. CREATE A SCHEDULE THAT INCLUDES TASKS FOR THE VAMC TO MOVE OUT AND TASKS FOR THE CONTRACTOR TO MOVE IN. ADDITIONALLY, PROVIDE TWO REPORTS EACH MONTH - ONE FILTERED TO ONLY SHOW THE VAMC MOVING TASKS AND ANOTHER FOR VAMC CLEANING TASKS. IF THE MOVING DATE CHANGES BY MORE THAN 1 DAY, SEND AN UPDATED REPORT TO THE COR. THE VAMC WILL PERFORM SURGICAL CLEANING AFTER ACCEPTANCE OF THE O.R. SPACES.
AutoCAD SHX Text
EXISTING CONSTRUCTION NOTES
AutoCAD SHX Text E1 EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING DEMOLITION WORK, PREP AS REQUIRED FOR NEW WALL FINISH. E2 THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS TO REMAIN AND SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE DAMAGED TILES AND GRID ASSEMBLY AS NEEDED. E3 PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME RETARDANT SURFACE PROTECTION. TAPE SEAMS AND EDGES. (BASIS OF DESIGN: TRIMACO AQUA SHIELD) E4 EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E5 EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO DETAIL 1/A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E6 EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. E7 EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP AS REQUIRED FOR NEW FINISH. PHOTOGRAPH BOTH SIDES OF THE WALLS BEFORE STARTING WORK. E8 EXISTING HANDRAIL TO REMAIN. EXISTING HANDRAIL TO REMAIN. E9 EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW WALL ASSEMBLY; SEE THE ELECTRICAL WORK SCOPE. E10 EXISTING DOOR TO REMAIN LOCKED DURING DEMOLITION AND EXISTING DOOR TO REMAIN LOCKED DURING DEMOLITION AND NEW CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E11 EXISTING CONTROL PANEL TO REMAIN. EXISTING CONTROL PANEL TO REMAIN. E12 DOOR LEAF TO REMAIN CLOSED DURING CONSTRUCTION, DOOR LEAF TO REMAIN CLOSED DURING CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E13 EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, SUSPEND ITEMS IN PLACE. PROVIDE ADDITIONAL HANGER SUPPORTS AS REQUIRE. REINSTALL ITEMS INTO NEW ACOUSTICAL CEILING. E14 EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING. E15 EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, G.C. TO CLEAN LIGHTING AND DIFFUSERS. E16 EXISTING NITROGEN CONTROL BOX (NCB) TO BE REPLACED. EXISTING NITROGEN CONTROL BOX (NCB) TO BE REPLACED. REFER TO PLUMBING DRAWINGS FOR ADDITIONAL INFORMATION. REFER TO PLUMBING DRAWINGS FOR ADDITIONAL INFORMATION. SEE DETAIL 2/A-13 WHEN POSSIBLE MAKE REPAIRS FROM CORRIDOR SIDE OF WHEN POSSIBLE MAKE REPAIRS FROM CORRIDOR SIDE OF WALL. E17 EXISTING BOLLARDS AND METAL BOX EXISTING BOLLARDS AND METAL BOX EXISTING BOLLARDS AND METAL BOX
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D1. REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. PREP AREA FOR NEW WALL ASSEMBLY. D2. REMOVE WALL BASE. REMOVE WALL BASE. D3. REMOVE/REINSTALL METAL CORNER GUARDS. REMOVE/REINSTALL METAL CORNER GUARDS. D4. PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL CEILING; SEE PLUMBING AND ELECTRICAL WORK SCOPE. CEILING SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE ASSEMBLY AS NEEDED. D5. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. D6. P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D7. P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D8. P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP PANEL IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D9. P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB BOX IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D10. ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D11. ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D12. WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER ENTRANCE. D13. REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D14. REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D15. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. D16. VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, ARTWORK, MARKERBOARDS, ETC..) D17. EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE OFF THE DOOR WITH 1HR-RATED PLASTIC. INSTALL TEMPORARY SIGNAGE. D18. REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL WALLS AND FRAMES FOR NEW FINISHES, REFER TO DETAIL 1/A-14. REMOVE EXISTING SUSPENDED CEILING ASSEMBLY AND INSTALL NEW SUSPENDED CEILING ASSEMBLY. D19. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. D20. INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE DECK; REMOVE AT THE END OF EACH PHASE. NOTE: THE INTEGRITY OF TEMPORARY CEILING ASSEMBLY NEEDS TO BE MAINTAINED DURING CONSTRUCTION. D21. REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. INSTALL 5/8" TYPE X FIRE RATED CEILING WHEN EMPLOYEES ARE NOT ACTIVELY WORKING. INSTALL FIRE RATED PLASTIC ABOVE CEILING AS NEEDED FOR ICRA TO MAINTAIN CORRECT ROOM PRESSURES. D22. REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. SEE DETAIL 2 / A-13 ALSO COORDINATE WITH THE COR IN EACH OPERATING ROOM TO GET UP TO TWO S.F. OF ADDITIONAL SOLID SURFACE REMOVAL AND REPAIR / FIXES TO EXISTING.
AutoCAD SHX Text
NEW CONSTRUCTION NOTES
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D23. VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO THE CONSTRUCTION CORRIDOR AND SELECT ROOMS. CONTRACTOR TO CONSTRUCT, CLEAN AND MAINTAIN A CHANGING AREA FOR THE VA STAFF TO RETURN TO A STERILE ENVIRONMENT. THE CONTRACTOR IS TO PROVIDE A HEPA FILTRATION SYSTEM TIED TO THE EXHAUST OR RETURN DIFFUSERS, CLEAN CORRIDORS FREE OF ANY HAZARDS, AND PROVIDE TRAINING TO THE VA STAFF TO ACCESS THE CONSTRUCTION SPACE G.C. TO PROVIDE A WARDROBE CABINET WITH SHELVES (SEE MCMASTER-CARR BEIGE 9705T17 AS BASIS OF DESIGN). VA WILL PROVIDE VA PERSONAL PPE SUPPLIES AND A CHAIR. D24. REMOVE EXISTING ALARM PANEL (AP) AND PATCH WALL; SEE REMOVE EXISTING ALARM PANEL (AP) AND PATCH WALL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D25. REMOVE METAL FRAME WORK. PATCH WALLS. REMOVE METAL FRAME WORK. PATCH WALLS. D26. REMOVE (2) EQUIPMENT PADS. RETURN FLOOR TO SMOOTH REMOVE (2) EQUIPMENT PADS. RETURN FLOOR TO SMOOTH FINISH. D27. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. D28. REMOVE AND REPLACE EXISTING NITROGEN CONTROL BOX REMOVE AND REPLACE EXISTING NITROGEN CONTROL BOX (NCB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. D29. RELOCATING ZVB VALVE TO A NEW LOCATION; SEE PLUMBING RELOCATING ZVB VALVE TO A NEW LOCATION; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D30. REMOVE METAL BOX AND PATCH WALLS AS NEEDED. REMOVE METAL BOX AND PATCH WALLS AS NEEDED. COORDINATE WITH PLUMBING CONTRACTOR.
AutoCAD SHX Text
BID DOCUMENTS FOR CONSTRUCTION
AutoCAD SHX Text
FULLY SPRINKLERED
AutoCAD SHX Text
REPLACE/UPGRADE MEDICAL GAS SYSTEM
AutoCAD SHX Text 521-21-106
AutoCAD SHX Text 07-07-2023
AutoCAD SHX Text
700 S. 19TH STREET, BIRMINGHAM, AL 35233
AutoCAD SHX Text
BIRMINGHAM VA MEDICAL CENTER
AP-6-7
ICRA TYPE II
REFERENCE SHEET A-12
AP-6-5
CONDITION A
ICRA TYPE II
REFERENCE SHEET A-12
OLD ZVB-6-6, OLD AP-6-6
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
VAMC NOTE:
ROOMS 6426 & 6427 TO BE
VACATED AND TURNED
OVER TO THE CONTRACTOR
NEW ZVB-6-6
CONDITION B (ALARM IN
REMOTE LOCATION)
ICRA TYPE I
REFERENCE SHEET A-12
NEW AP-6-6
CONDITION B
ICRA TYPE I
REFERENCE SHEET A-12
ZVB-6-7
CONDITION B (NO ALARM
NO COMBO ZVB)
ICRA TYPE I
REFERENCE SHEET A-12
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED DEMO PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
6TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
BIRMINGHAM
VA MEDICAL
CENTER
U.S. Department of Veterans Affairs
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Project Director
Revisions: Date:
AutoCAD SHX Text
AutoCAD SHX Text
ICE MACH
AutoCAD SHX Text
AP-6-7
AutoCAD SHX Text
AP-6-5
AutoCAD SHX Text
ZVB-6-6
AutoCAD SHX Text
AP-6-6
AutoCAD SHX Text
ZVB-6-7
AutoCAD SHX Text
READING RM 6424
AutoCAD SHX Text
CHASE
AutoCAD SHX Text
CORRIDOR
AutoCAD SHX Text
STORAGE 6432A
AutoCAD SHX Text
RECEPTION WORK
AutoCAD SHX Text
AP-6-6
AutoCAD SHX Text
ZVB-6-6
AutoCAD SHX Text
ZVB-6-7
AutoCAD SHX Text
SIXTH FLOOR ENLARGED ICRA PLANS
AutoCAD SHX Text A-09
AutoCAD SHX Text
AB
AutoCAD SHX Text
BVG
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP-6-5
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS AP-6-6 AND ZVB-6-6
AutoCAD SHX Text 10A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-7
AutoCAD SHX Text 11A
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL AP-6-7
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
RISER VALVES ABOVE CEILING
AutoCAD SHX Text
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS AP-6-6 AND ZVB-6-6
AutoCAD SHX Text 10B
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANEL ZVB-6-7
AutoCAD SHX Text 11B
AutoCAD SHX Text N1. INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) 58" TYPE "X" GWB) OVER 3-5/8" METAL STUD FRAMING AT 16" O.C.), EXTEND ASSEMBLY 4" ABOVE FINISH CEILING. N2. PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH ADJACENT CONSTRUCTION. SEE GI DRAWINGS FOR EXTENT OF PAINTING NOTE: "NEW WALL FINISH" N3. REINSTALL METAL CORNER GUARD. REINSTALL METAL CORNER GUARD. N4. REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REPAIR AND REPLACE TILE AND GRID AS REQUIRED. N5. INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO MATCH ADJACENT CONSTRUCTION. N6. P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED IN WALL. (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N7. THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N8. NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N9. NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER FINISH, PAINT AND CMU WALL ASSEMBLY TO MATCH ADJACENT CONSTRUCTION. N10. INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING CONSTRUCTION. PAINT TO MATCH ADJACENT CONSTRUCTION. N11. P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION UNIT (TRANSDUCERS ARE PART OF THE ZVB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N12. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. N13 E.C TO PROVIDE NEW ELECTRICAL CONDUIT FOR TRANSDUCER WIRE & OPEN AIR WIRE ON J-HOOKS; SEE ELECTRICAL WORK SCOPE. N14. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE FROM ZVB AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE. N15. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE TO REMOTE ALARM PANEL AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE.. N16 . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH . P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH P.C TO PROVIDE NEW ZONE VALVE BOX (STANDARD BOX WITH NO TRANSDUCERS); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N17. PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING PATCH EXISTING PARTITION, NEW ASSEMBLY TO MATCH EXISTING CONSTRUCTION. N18. INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; INSTALL NEW RETRO ALARM PANEL, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N19 P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK P.C. INSTALL VALVES; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N20. INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO INSTALL NEW FIRE-RATED PLYWOOD SHEATHING CORNER TO CORNER AND UNISTRUT TANK SUPPORT PAINT ALL WALLS WITH URETHANE PAINT; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. N21 INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL INSTALL WALL MOUNTED METAL CABINET; REFER TO DETAIL 1/A-14 FOR ADDITIONAL INFORMATION. COORDINATE LOCATION WITH COR. N22. INSTALL NEW SUSPENDED 24" X 48" WASHABLE INSTALL NEW SUSPENDED 24" X 48" WASHABLE ACOUSTICAL CEILING ASSEMBLY AT SAME HEIGHT AS ORIGINAL CEILING. N23. NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT NEW DRYWALL CEILING ASSEMBLY (URETHANE GLOSS PAINT FINISH) TYPE TO MATCH ADJACENT CONSTRUCTION. N24. PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR PAINT WALLS, COLOR AND FINISH TO MATCH EXISTING. DOOR FRAMES WITHIN THE NOTED AREA TO RECEIVE NEW PAINT ALL SIDES MATCH EXISTING COLOR. N25. PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO PAINT EXISTING COLUMN ALL SIDES, COLOR AND FINISH TO MATCH EXISTING. N26. CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS CLEAN AND PAINT DOOR FRAMES ALL SIDES AND WALLS (DASHED AREA) WITH WASHABLE URETHANE PAINT. PAINT FLOORS AND EQUIPMENT PAD WITH EPOXY. REFER TO LIFE SAFETY PLAN KEYNOTE #4. N27. THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING THE P.C. TO PROVIDE NEW MANIFOLD SYSTEM; SEE PLUMBING WORK SCOPE. N28. REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REPAIR SOLID-SURFACE WALLS AFFECTED BY DEMOLITION REQUIRED FOR PLUMBING NEW LINES. REPLACE WITH MATCHING MATERIALS, NO EXPOSED FASTENERS. SEE 2 / A-13 THE VAMC REQUIRES ALL ROOMS DESIGNATED FOR TURNOVER TO THE CONTRACTOR TO BE RETURNED IN A CLEAN STATE. CREATE A SCHEDULE THAT INCLUDES TASKS FOR THE VAMC TO MOVE OUT AND TASKS FOR THE CONTRACTOR TO MOVE IN. ADDITIONALLY, PROVIDE TWO REPORTS EACH MONTH - ONE FILTERED TO ONLY SHOW THE VAMC MOVING TASKS AND ANOTHER FOR VAMC CLEANING TASKS. IF THE MOVING DATE CHANGES BY MORE THAN 1 DAY, SEND AN UPDATED REPORT TO THE COR. THE VAMC WILL PERFORM SURGICAL CLEANING AFTER ACCEPTANCE OF THE O.R. SPACES.
AutoCAD SHX Text
EXISTING CONSTRUCTION NOTES
AutoCAD SHX Text E1 EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING EXISTING WALL ASSEMBLY TO REMAIN, PROTECT DURING DEMOLITION WORK, PREP AS REQUIRED FOR NEW WALL FINISH. E2 THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS THE EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY IS TO REMAIN AND SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE DAMAGED TILES AND GRID ASSEMBLY AS NEEDED. E3 PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME PROTECT EXISTING FLOORING USING A SLIP RESISTANT, FLAME RETARDANT SURFACE PROTECTION. TAPE SEAMS AND EDGES. (BASIS OF DESIGN: TRIMACO AQUA SHIELD) E4 EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO EXISTING ALARM PANEL (AP) TO BE RETROFIT, REFER TO SHEET A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E5 EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO EXISTING ZONE VALVE BOX (ZVB) TO BE RETROFIT, REFER TO DETAIL 1/A-12; SEE PLUMBING AND ELECTRICAL WORK SCOPE. E6 EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. EXISTING ZONE VALVE BOX (ZVB) TO REMAIN. E7 EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP EXISTING PLASTER FINISH OVER CMU WALL ASSEMBLY, PREP AS REQUIRED FOR NEW FINISH. PHOTOGRAPH BOTH SIDES OF THE WALLS BEFORE STARTING WORK. E8 EXISTING HANDRAIL TO REMAIN. EXISTING HANDRAIL TO REMAIN. E9 EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW EXISTING ELECTRICAL SERVICE TO BE RELOCATED TO NEW WALL ASSEMBLY; SEE THE ELECTRICAL WORK SCOPE. E10 EXISTING DOOR TO REMAIN LOCKED DURING DEMOLITION AND EXISTING DOOR TO REMAIN LOCKED DURING DEMOLITION AND NEW CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E11 EXISTING CONTROL PANEL TO REMAIN. EXISTING CONTROL PANEL TO REMAIN. E12 DOOR LEAF TO REMAIN CLOSED DURING CONSTRUCTION, DOOR LEAF TO REMAIN CLOSED DURING CONSTRUCTION, PROVIDE SIGNAGE AS NECESSARY. E13 EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, EXISTING LIGHT FIXTURES AND A/V EQUIPMENT TO REMAIN, SUSPEND ITEMS IN PLACE. PROVIDE ADDITIONAL HANGER SUPPORTS AS REQUIRE. REINSTALL ITEMS INTO NEW ACOUSTICAL CEILING. E14 EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING DRYWALL CEILING TO REMAIN, PAINT TO MATCH EXISTING. E15 EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, EXISTING O.R. LIGHTING AND HVAC DIFFUSERS TO REMAIN, G.C. TO CLEAN LIGHTING AND DIFFUSERS. E16 EXISTING NITROGEN CONTROL BOX (NCB) TO BE REPLACED. EXISTING NITROGEN CONTROL BOX (NCB) TO BE REPLACED. REFER TO PLUMBING DRAWINGS FOR ADDITIONAL INFORMATION. REFER TO PLUMBING DRAWINGS FOR ADDITIONAL INFORMATION. SEE DETAIL 2/A-13 WHEN POSSIBLE MAKE REPAIRS FROM CORRIDOR SIDE OF WHEN POSSIBLE MAKE REPAIRS FROM CORRIDOR SIDE OF WALL. E17 EXISTING BOLLARDS AND METAL BOX EXISTING BOLLARDS AND METAL BOX EXISTING BOLLARDS AND METAL BOX
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D1. REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING REMOVE EXISTING PARTITION WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. PREP AREA FOR NEW WALL ASSEMBLY. D2. REMOVE WALL BASE. REMOVE WALL BASE. D3. REMOVE/REINSTALL METAL CORNER GUARDS. REMOVE/REINSTALL METAL CORNER GUARDS. D4. PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL PROVIDE ACCESS ABOVE THE SUSPENDED ACOUSTICAL CEILING; SEE PLUMBING AND ELECTRICAL WORK SCOPE. CEILING SHALL BE MAINTAINED AS A FIRE BARRIER WHEN NOT SUPERVISED BY THE CONTRACTOR. REPAIR OR REPLACE ASSEMBLY AS NEEDED. D5. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. REMOVE/REINSTALL OFFICE MODULAR FURNITURE UNIT. D6. P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE P.C. WILL REMOVE THE MASTER ALARM PANEL (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D7. P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND P.C WILL REMOVE ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C TO DEMO AND PATCH AS NEEDED. D8. P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP P.C. WILL REMOVE ALARM PANEL (AP); AFTER NEW AP PANEL IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D9. P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB P.C. WILL REMOVE ZONE VALVE BOX (ZVB) AFTER NEW ZVB BOX IS INSTALLED; SEE PLUMBING AND ELECTRICAL WORK SCOPE. G.C. TO DEMO AND PATCH AS NEEDED. D10. ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ICRA HARDWALL, TYPE I; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D11. ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ICRA SOFTWALL, TYPE II; REFERENCE SHEET A-12 FOR ADDITIONAL INFORMATION. D12. WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER WALKOFF MAT, INSTALLED ON EACH SIDE OF ICRA BARRIER ENTRANCE. D13. REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY REMOVE EXISTING PLASTER FINISH AND CMU WALL ASSEMBLY AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D14. REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF REMOVE DRYWALL WALL AS REQUIRED FOR INSTALLATION OF PLUMBING AND ELECTRICAL WORK SCOPE. D15. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. REMOVE/REINSTALL EXISTING HANDRAIL AND BUMPER RAIL. D16. VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, VAMC TO REMOVE WALL-MOUNTED ACCESSORIES (I.E, ARTWORK, MARKERBOARDS, ETC..) D17. EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE EXISTING DOOR TO ACT AS CONSTRUCTION BARRIER. TAPE OFF THE DOOR WITH 1HR-RATED PLASTIC. INSTALL TEMPORARY SIGNAGE. D18. REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL REMOVE EXISTING WOOD WALL RAIL SYSTEM, PREP ALL WALLS AND FRAMES FOR NEW FINISHES, REFER TO DETAIL 1/A-14. REMOVE EXISTING SUSPENDED CEILING ASSEMBLY AND INSTALL NEW SUSPENDED CEILING ASSEMBLY. D19. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. REMOVE SUSPENDED ACOUSTICAL CEILING ASSEMBLY. D20. INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE INSTALL 1 HOUR RATED PLASTIC ABOVE CEILING TO THE DECK; REMOVE AT THE END OF EACH PHASE. NOTE: THE INTEGRITY OF TEMPORARY CEILING ASSEMBLY NEEDS TO BE MAINTAINED DURING CONSTRUCTION. D21. REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING REMOVE SELECT DRYWALL CEILING ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. INSTALL 5/8" TYPE X FIRE RATED CEILING WHEN EMPLOYEES ARE NOT ACTIVELY WORKING. INSTALL FIRE RATED PLASTIC ABOVE CEILING AS NEEDED FOR ICRA TO MAINTAIN CORRECT ROOM PRESSURES. D22. REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING REMOVE SOLID SURFACE WALL ASSEMBLY; SEE PLUMBING AND ELECTRICAL WORK SCOPE. SEE DETAIL 2 / A-13 ALSO COORDINATE WITH THE COR IN EACH OPERATING ROOM TO GET UP TO TWO S.F. OF ADDITIONAL SOLID SURFACE REMOVAL AND REPAIR / FIXES TO EXISTING.
AutoCAD SHX Text
NEW CONSTRUCTION NOTES
AutoCAD SHX Text
DEMOLITION PHASE NOTES
AutoCAD SHX Text D23. VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO VA STAFF WILL NEED ACCESS DURING REGULAR HOURS TO THE CONSTRUCTION CORRIDOR AND SELECT ROOMS. CONTRACTOR TO CONSTRUCT, CLEAN AND MAINTAIN A CHANGING AREA FOR THE VA STAFF TO RETURN TO A STERILE ENVIRONMENT. THE CONTRACTOR IS TO PROVIDE A HEPA FILTRATION SYSTEM TIED TO THE EXHAUST OR RETURN DIFFUSERS, CLEAN CORRIDORS FREE OF ANY HAZARDS, AND PROVIDE TRAINING TO THE VA STAFF TO ACCESS THE CONSTRUCTION SPACE G.C. TO PROVIDE A WARDROBE CABINET WITH SHELVES (SEE MCMASTER-CARR BEIGE 9705T17 AS BASIS OF DESIGN). VA WILL PROVIDE VA PERSONAL PPE SUPPLIES AND A CHAIR. D24. REMOVE EXISTING ALARM PANEL (AP) AND PATCH WALL; SEE REMOVE EXISTING ALARM PANEL (AP) AND PATCH WALL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D25. REMOVE METAL FRAME WORK. PATCH WALLS. REMOVE METAL FRAME WORK. PATCH WALLS. D26. REMOVE (2) EQUIPMENT PADS. RETURN FLOOR TO SMOOTH REMOVE (2) EQUIPMENT PADS. RETURN FLOOR TO SMOOTH FINISH. D27. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. EXISTING ROOM TO SERVICE AS CONSTRUCTION BARRIER. D28. REMOVE AND REPLACE EXISTING NITROGEN CONTROL BOX REMOVE AND REPLACE EXISTING NITROGEN CONTROL BOX (NCB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. D29. RELOCATING ZVB VALVE TO A NEW LOCATION; SEE PLUMBING RELOCATING ZVB VALVE TO A NEW LOCATION; SEE PLUMBING AND ELECTRICAL WORK SCOPE. D30. REMOVE METAL BOX AND PATCH WALLS AS NEEDED. REMOVE METAL BOX AND PATCH WALLS AS NEEDED. COORDINATE WITH PLUMBING CONTRACTOR.
AutoCAD SHX Text
BID DOCUMENTS FOR CONSTRUCTION
AutoCAD SHX Text
FULLY SPRINKLERED
AutoCAD SHX Text
REPLACE/UPGRADE MEDICAL GAS SYSTEM
AutoCAD SHX Text 521-21-106
AutoCAD SHX Text 07-07-2023
AutoCAD SHX Text
700 S. 19TH STREET, BIRMINGHAM, AL 35233
AutoCAD SHX Text
BIRMINGHAM VA MEDICAL CENTER
8TH FLOOR PARTIAL ENLARGED REFERENCE PLAN
Project Number
Building Number
Drawing Number
Project Title
Location
Issue Date Checked Drawn
Drawing Title
Approved:
VA FORM 08 - 6231
BIRMINGHAM
VA MEDICAL
CENTER
U.S. Department of Veterans Affairs
A
B
C
D
E
F
21 4 5 6 7 8 9 10
PhaseARCHITECT/ENGINEER OF RECORD STAMPCONSULTANT
321 4 5 6 7 8 9 10
Project Director
Revisions: Date:
AutoCAD SHX Text
HAC 7115
AutoCAD SHX Text
ZVB-7-1
AutoCAD SHX Text
AP-7-1
AutoCAD SHX Text
SEVENTH FLOOR ENLARGED ICRA PLANS
AutoCAD SHX Text A-10
AutoCAD SHX Text
AB
AutoCAD SHX Text 3/8" = 1'-0"
AutoCAD SHX Text
PANELS AP-7-1 AND ZVB-7-1
AutoCAD SHX Text
AutoCAD SHX Text N1. INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) INSTALLED NEW PARTITION WALL ASSEMBLY ( " TYPE "X" GWB) 58" TYPE "X" GWB) OVER 3-5/8" METAL STUD FRAMING AT 16" O.C.), EXTEND ASSEMBLY 4" ABOVE FINISH CEILING. N2. PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH PAINT NEW WALL ASSEMBLY, COLOR AND FINISH TO MATCH ADJACENT CONSTRUCTION. SEE GI DRAWINGS FOR EXTENT OF PAINTING NOTE: "NEW WALL FINISH" N3. REINSTALL METAL CORNER GUARD. REINSTALL METAL CORNER GUARD. N4. REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REINSTALL EXISTING SUSPENDED ACOUSTICAL CEILING ASSEMBLY, REPAIR AND REPLACE TILE AND GRID AS REQUIRED. N5. INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO INSTALL NEW VINYL WALL BASE; SIZE, TYPE AND COLOR TO MATCH ADJACENT CONSTRUCTION. N6. P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED P.C. TO PROVIDE NEW MASTER ALARM PANEL FLUSH MOUNTED IN WALL. (MAP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N7. THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND THE P.C. TO PROVIDE NEW ALARM PANEL; SEE PLUMBING AND ELECTRICAL WORK SCOPE. N8. NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK NEW ALARM PANEL (AP); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N9. NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER NEW PLASTER FINISH AND CMU WALL ASSEMBLY, PLASTER FINISH, PAINT AND CMU WALL ASSEMBLY TO MATCH ADJACENT CONSTRUCTION. N10. INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING INSTALLED NEW DRYWALL FINISH, TYPE TO MATCH EXISTING CONSTRUCTION. PAINT TO MATCH ADJACENT CONSTRUCTION. N11. P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION P.C. TO INSTALL NEW ZONE VALVE BOX (ZVB) COMBINATION UNIT (TRANSDUCERS ARE PART OF THE ZVB); SEE PLUMBING AND ELECTRICAL WORK SCOPE. N12. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. REINSTALL HANDRAIL AND BUMPER RAIL ASSEMBLY. N13 E.C TO PROVIDE NEW ELECTRICAL CONDUIT FOR TRANSDUCER WIRE & OPEN AIR WIRE ON J-HOOKS; SEE ELECTRICAL WORK SCOPE. N14. THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL THE E.C. TO PROVIDE NEW ELECTRICAL CONDUIT AND PULL WIRE FROM ZVB AND OPEN AIR WIRE J-HOOKS; SEE ELECTRICAL WORK SCOPE. N15. THE E.C.
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .