ATTACHMENT 7 - Appendix I1 Bangor Fuel Cell Hangar-Exterior Materials Package-RTA.pdf

ME ANG Fuel Cell Hangar

Bangor, Maine

Project Number: FKNN159044

Exterior Finishes Package— Type B-3 Submittal

AUGUST 2025

Prepared for:

Maine Air National Guard

Prepared by:

601 NE 63rd Street

Oklahoma City, OK 73105

5970 Greenwood Plaza Boulevard

Greenwood Village, CO 80111

This page intentionally left blank.

Exterior Finishes

Project No. FKNN159044

TABLE OF CONTENTS

PART 1— EXTERIOR FINISHES NARRATIVE

PART 2—EXTERIOR FINISH SAMPLES

PART 3—DRAWINGS

Finish Materials List

Project No. FKNN159044

PART 1

EXTERIOR FINISHES NARRATIVE

Project No. FKNN159044

EXTERIOR FINISHES NARRATIVE

DESIGN REFERENCES:

ANGETL 15-01 Air National Guard Design Policy

ANGETL 10-03 Air National Guard Design Objectives and Procedures

UFC 3-120-01 Design: Sign Standards, with Change 4

UFC 3-101-01 Architecture, with Change 4

UFC 4-211-01 Aircraft Maintenance Hangars

UFC 4-211-02 Aircraft Corrosion Control and Paint Facilities

INTRODUCTION

This project will provide a Fuel Cell Hangar for the 101st Air Refueling Wing (101 ARW) of the Maine Air National

Guard (ME ANG). The new facility will include a Hangar Bay, clean and dirty restrooms and showers, Tool Room, Super-visor’s Office, Multipurpose Room which will function as both a break room and open office, and building support spaces.

COMPREHENSIVE INTERIOR DESIGN (CID)

The goal of the Comprehensive Interior Design (CID) for the new Fuel Cell Hangar is to create a safe, functional, and attractive space in which to carry out the mission of 101 ARW.

FURNITURE, FIXTURES AND EQUIPMENT (FF&E)

The FF&E package has been provided under a separate cover.

STRUCTURAL INTERIOR DESIGN (SID)

The SID package has been provided under separate cover

EXTERIOR FINISHES

The design of the project includes the selection and coordination of interior and exterior materials and finishes. These finishes have been selected from a cool, analogous color scheme compatible with the character of the surrounding facili-ties. Exterior finishes have been selected to match adjacent building 499. In cases where products used for building 499 are unavailable, a product that closely matches its aesthetic and performance characteristics will be specified.

All products listed in the construction documents are the basis of design. Products from other manufacturers may be substituted provided that the standard of quality and characteristics of the substituted material meet or exceed the stand-ard of quality and characteristics of the basis of design.

Project No. FKNN159044

Federal Standard LRV SRI Applied To

#26492 47 63 Canopies

SSMR

Fascia

Gutters

Downspouts

Cast Iron Boots

Access Hatch

#27925 70 82 Composite Metal Panels

Insulated Metal Panels

Translucent Panel Frames

Light Fixture Housing

Louvers

Flashing

Soffits

Personnel Door Trim

#26134 13 19 Personnel Doors

Personnel Door Frames

Overhead Doors

Overhead Door Frames

#24158 - - Knox Box

#13591 - - Access Hatch Railing

Bollards

#24081 - - Light Fixture Housing

Signage

Signage will be provided for the exterior of the building in accordance with UFC 3-120-01. Dimensional facility num-ber signs will be provided at both the north and south facades. A freestanding, post and panel sign will be provided facing Glenn Avenue.

Exterior Finishes

A standing seam metal roof (SSMR) will be provided along with associated drainage products, and snow guards.

Exterior finishes for the shops will be brick veneer with horizontal metal panels above, while the hangar will receive brick with vertical metal panels above. Translucent panels will be utilized at the hangar to provide daylighting. Pre-manufactured canopies will be provided at all personnel and overhead doors.

Federal Standard colors have been used in the design documents to ensure competition is kept free and open to all qualified manufacturers. Their equivalent color names have been listed below.

Project No. FKNN159044

PART 2

EXTERIOR FINISH SAMPLES

Project No. FKNN159044

PART 3

DRAWINGS

EXTERIOR FINISHES INTERIOR FINISHES GENERAL SHEET NOTES

CODE MFR/DESCRIPTION

FLOORS:

E-EPOXY:

E-1 5-COAT FUEL RESISTIVE EPOXY FLOORING, FINISH: SLIP-RESISTANT,

COLOR: MEDIUM GRAY

E-2 FLECKED EPOXY FLOORING, COLOR: GRAY WITH GREEN AND WHITE CHIPS

LIN-LINOLEUM:

LIN-1 SHEET LINOLEUM FLOORING, COLOR: MEDIUM GRAY

SDV -STATIC DISSIPATIVE VINYL TILE:

SDV-1 STATIC DISSIPATIVE VINYL FLOOR TILE FLOORING, COLOR: BEIGE WITH BLUE VEINING, SIZE: 24" x 24"

SC-SEALED CONCRETE

SC-1 SEALED CONCRETE

EM-ENTRANCE MAT:

EM-1 RECESSED ALUMINUM GRID ENTRY MAT WITH CARPET INSERTS, COLOR: CHARCOAL

WALLS:

P-PAINT:

P-1 WALL PAINT / COOL WHITE

P-2 SHERWIN WILLIAMS / SW6176 LIVEABLE GREEN

P-3 SHERWIN WILLIAMS / SW7044 AMAZING GRAY

P-4 WALL PAINT / COOL LIGHT GRAY

T-TILE:

T-1 SLATE-LOOK WALL TILE, COLOR: DARK GREEN, SIZE: 12" x 12", INSTALLATION: STACK BOND, GRT-1

T-2 SLATE-LOOK MOSAIC WALL TILE, COLOR: BEIGE/RED/GREEN/BLACK, SIZE: 4" x 12", GRT-1

T-3 SLATE-LOOK WALL TILE, COLOR: DARK GREEN, SIZE: 3" x 3", INSTALLATION: STACK BOND, GRT-1

TE-TILE EDGING:

TE-1 COVE PROFILE, FINISH: SATIN NICKEL ANODIZED ALUMINUM

TE-2 RADIUS PROFILE, FINISH: SATIN NICKEL ANODIZED ALUMINUM

GRT-GROUT:

GRT-1 EPOXY GROUT, COLOR: BEIGE

RB-RESILIENT WALL BASE:

RB-1 RUBBER WALL BASE WITH TOE, COLOR: CHARCOAL, HEIGHT: 6"

FRP-FIBERGLASS REINFORCED PLASTIC:

FRP-1 FIBERGLASS REINFORCED PLASTIC WALL PANEL, COLOR: LIGHT GRAY,

TEXTURE: PEBBLE EMBOSSED

COUNTERTOPS & WINDOW SILLS:

SSM-SOLID SURFACE MATERIAL:

SSM-1 SOLID SURFACE, COLOR: BEIGE, PATTERN: VEINED WITH MEDIUM PARTICULATES

MILLWORK:

PLAM-PLASTIC LAMINATE:

PLAM-1 WOODGRAIN PLASTIC LAMINATE, COLOR: COOL BROWN, FINISH: FINE GRAIN

SHOWER STALL SURROUND:

SSM-SOLID SURFACE MATERIAL:

SSM-2 SOLID SURFACE, COLOR: WHITE, PATTERN: SMALL PARTICULATES

CEILINGS:

ACT-ACOUSTICAL CEILING TILE:

ACT-1 ARMSTRONG / ULTIMA HIGH NRC SQUARE LAY-IN, SIZE: 24" X 24"

P-PAINT:

P-5 CEILING PAINT / COOL WHITE

1 COLORS LISTED ARE FOR COLOR IDENTIFICATION PURPOSES ONLY. THIS

LISTING IS NOT INTENDED TO LIMIT SELECTION OF SAME QUALITY AND

SIMILAR COLORS, TEXTURES, AND PATTERNS FROM OTHER

MANUFACTURERS

2 PROVIDE COLOR AND FINISH SAMPLES OF ALL EXTERIOR FINISH

MATERIALS TO MAINE AIR NATIONAL GUARD 101 CES FOR FINAL

APPROVAL PRIOR TO ORDERING OR INSTALLING

3 INSTALL TILE AT MINIMUM JOINT WIDTHS RECOMMENDED BY

MANUFACTURER

4 INSTALL CG-1 CORNER GUARDS ABOVE SCHEDULED WALL BASE AT ALL

EXPOSED OUTSIDE GYPSUM WALL BOARD CORNERS

CODE MFR/DESCRIPTION

WINDOWS:

GLAZING COLOR: CLEAR

WINDOWS FRAMES:

P-6 FRAME PAINT, COLOR: DARK WARM GRAY

DOORS:

METAL MATCH P-6

DOOR FRAMES:

METAL MATCH P-6

RAMPS:

RAILINGS:

P-7 RAILING PAINT, COLOR: BRIGHT YELLOW

SPECIALTIES:

SST-STAINLESS-STEEL FLOOR SINK:

SST-1 FLOOR MOUNTED MOP SINK WITH DROP FRONT, COLOR: STAINLESS-STEEL, SIZE: 24" x 24"

CG-CORNER GUARDS:

CG-1 STAINLESS STEEL CORNER GUARDS, SIZE: 2"W x 48"H

TP-TOILET PARTITIONS:

TP-1 HDPE PARTITIONS, FLOOR-MOUNTED OVERHEAD BRACED, COLOR: DARK GREEN

TP-2 HDPE PARTITIONS, FLOOR-MOUNTED OVERHEAD BRACED, COLOR: MEDIUM GRAY

UP-URINAL PARTITIONS:

UP-1 MATCH TP-1

UP-2 MATCH TP-2

LOCKERS:

LD DOUBLE-TIER WARDROBE LOCKER, SIZE: 18"W x 24"D x 72"H, COLOR: LIGHT GRAY

LOCKER BENCHES:

LB LOCKER BENCH WITH SOLID WOOD TOP AND STAINLESS STEEL PEDESTALS, SIZE: 36"W

ROLLER WINDOW SHADES:

RS MANUAL ROLLER SHADE, FABRIC: TIGHT WEAVE, COLOR: CHARCOAL, 3% OPEN

SN-INTERIOR SIGNAGE:

SN-1 INTERIOR SIGN / CHARCOAL

SN-2 INTERIOR SIGN / BEIGE

SN-3 INTERIOR SIGN / SATIN ALUMINUM

CODE MFR/DESCRIPTION

FACADE:

BR-BRICK:

BR-1 CLAY BRICK, COLOR: MEDIUM WARM GRAY, FINISH: VELOUR

CP-COMPOSITE METAL PANELS:

CP-1 MATCH FEDERAL STANDARD #27925

IP-INSULATED METAL PANELS:

IP-1 MATCH FEDERAL STANDARD #27925

TRANSLUCENT PANELS:

PANELS EXTERIOR COLOR: CRYSTAL

INTERIOR COLOR: WHITE

FRAMES MATCH FEDERAL STANDARD #27925

MUNTINS COLOR: BLACK, PATTERN: REVERSE SHOJI

PREMANUFACTURED CANOPIES:

MATCH FEDERAL STANDARD #26492

EXHAUST FANS:

GALVANIZED STEEL

LIGHTING:

HOUSING MATCH FEDERAL STANDARD #24081

LOUVERS:

MATCH FEDERAL STANDARD #27925

ROOF:

SSMR-STANDING SEAM METAL ROOF:

SSMR-1 MATCH FEDERAL STANDARD #26492

FASCIA:

MATCH FEDERAL STANDARD #26492

SOFFITS:

MATCH FEDERAL STANDARD #27925

GUTTERS:

MATCH FEDERAL STANDARD #26492

DOWNSPOUTS:

MATCH FEDERAL STANDARD #26492

CAST IRON BOOTS:

MATCH FEDERAL STANDARD #26492

FLASHING:

MATCH FEDERAL STANDARD #27925

ACCESS HATCH AND RAILING:

HATCH MATCH FEDERAL STANDARD #26492

RAILING MATCH FEDERAL STANDARD #13591

DOORS:

PERSONNEL DOORS:

LEAVES MATCH FEDERAL STANDARD #26134

FRAMES MATCH FEDERAL STANDARD #26134

TRIM MATCH FEDERAL STANDARD #27925

OVERHEAD DOORS:

PANELS MATCH FEDERAL STANDARD #26134

FRAMES MATCH FEDERAL STANDARD #26134

TRIM MATCH FEDERAL STANDARD #27925

HANGAR DOORS:

PANELS MATCH FEDERAL STANDARD #27925

TRIM MATCH FEDERAL STANDARD #27925

SPECIALTIES:

SN-EXTERIOR SIGNAGE:

SN-4 DARK BRONZE

SN-5 REFLECTIVE WHITE

BOLLARDS:

MATCH FEDERAL STANDARD #13591

KNOX BOX:

MATCH FEDERAL STANDARD #24158

FIRE DEPARTMENT CONNECTION:

POLISHED BRASS

FIRE DEPARTMENT HOSE CONNECTION TEST HEADER:

POLISHED BRASS

PROJ:

DESN:

DRWN:

CHKD:

SHEET: OF

Bar measures 1 inch, otherwise drawing is not to scale

M A

R K

D A

T E

D E

S C

R

IP

T

IO

N B

Y

A

B

C

D

E

F

1 2 3 4 5 6 7

FKNN159044

D.CAVIN

L.PENDERGRAFT

C.SEGHI

M E

A N

G F

U E

L C

E L L H

A N

G A

R

M A

IN

E

A

IR

N A

T

IO

N A

L G

U A

R D

B

A N

G O

R M

E

AF001

F

IN

IS

H

M A

T E

R

IA

L S

L

IS

T

B-3 SUBMITTAL