ATTACHMENT 5 -- ATTLA Universal Data Sheet excel workbook.xlsx
XLSX spreadsheet 989 KB Posted
- Attached to
- ABDR TRAILERS
- Solicitation number
- FA8100-25-R-B007
About this file
The file is an ATTLA Universal Data Sheet excel workbook with detailed instructions for airlift certification of vehicles and equipment for military transport aircraft. The document provides comprehensive guidelines for submitting vehicles for airworthiness certification, including specific dimensional, weight, and technical requirements for transportation on US Air Force aircraft such as C-130, C-5, and C-17. Key certification requirements include precise measurements of vehicle dimensions (length, width, height), weight specifications, tie-down provision ratings, documentation standards, and special handling considerations for items that may pose challenges during aerial transport.
The instructions outline a rigorous certification process that can take up to 120 days, requiring extensive documentation including 3-view schematics, digital photos from multiple angles, technical drawings of tie-down provisions, and detailed vehicle specifications. Critical elements include verifying vehicle weight distribution, tie-down capacities (capable of restraining vehicles at 3Gs forward, 1.5Gs lateral, 2Gs vertical), and compliance with decompression and structural integrity standards. Additional requirements for specific vehicle types like helicopters are also detailed, emphasizing the meticulous nature of military equipment transport certification.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Instructions
| Instructions for Airlift Certification | |
| ATTLA can be contacted at ATTLA@us.af.mil | |
| 1 | All data entries are required information, by vehicle type. |
| 2 | In accordance with US Department of Defense regulations, any item airlifted by USAF aircraft should be evaluated for airlift if they exceed the following dimensions: |
1. Length greater than: 240 inches (20-feet)
2. Width greater than: 96 inches (8 feet)
3. Height greater than: 96 inches (8 feet)
4. Weight greater than: 10,000 lb
5. Weight distribution greater than aircraft limits, nominally based on the C-130:
a. 5,000 pound axle
b. 2,500 pound wheel
c. 1,600 pounds per linear foot running load
d. 50 psi floor contact pressure
6. Requires special handing for one or more of the following reasons:
a. Item characteristics are such that the aircraft and/or Air Force materials handling environment poses a problem
b. Requires usage of air electrical power or electronic system
c. Cargo has electronic components that are powered on (electronically active) or are used while in the aircraft other than during onload/offload from/to the ground
d. Cargo occupied by personnel during any phase of flight
e. Susceptible to potential aircraft environment: high altitude, rapid decompression, electromagnetic environment, and/or extreme temperature.
f. Susceptibility to explosive atmosphere environment (aerial tanker aircraft only)
7. Inadequate ramp clearance for ramp inclines of 15 degrees
8. Requires special loading/unloading procedures for any other reason
| 3 | Please designate units of measure at the top of the sheet (listed in red). Use Standard abbreviations: cm, m, in, kg, lbm, pa, psi. DO NOT MIX UNITS! 30ft 8in 10m 45cm |
| 4 | Documentation must be in English or have English translation provided. |
| 5 | Indicate if vehicle is used and/or certified by another nation under a different name. |
| 6 | Indicate if the vehicle is a variant of a chassis which has already been certified. |
| 7 | Vehicle name should be common user name applied by country. |
| 8 | Please also include year, make, model, Vehicle Identification numbers (VIN), Military designations, National Stock Number, and NATO stock numbers (as applicable) are required to verify the specific vehicles being certified. |
| 9 | If VIN are not available, use hull numbers, registration numbers or other number permanently attached to the vehicle. These numbers are especially important when certifying commercial off-the-shelf items. For example, the certification letter for a 1998 Land Rover will be different than a 2008 Land Rover. License plate numbers are not acceptable. |
| 10 | Tie Down Provision Ratings - My be obtained from a variety of sources including: |
- the vehicle manufacturer
- nations may use their own structural engineers to evaluate and provide a strength analysis
- nations may contract a structural engineering firm to evaluate an provide a strength analysis
- nations may gain data from anther nation using the same vehicle
* Note that tie down provisions must be capable of restraining the vehicle for 3Gs forward, 1.5Gs lateral left/right and aft, 2Gs vertical up. The cargo must have the structural integrity to withstand 4.5Gs down.
| 11 | Rated capacity (strength) of each tie down provision must be provided. |
| 12 | Federal Sponsor - Agency or DOD Branch for whom the item is being moved |
| 13 | Provide 3-view schematic drawings if available. |
| 14 | Digital photos of all four sides of vehicle are required. |
| 15 | Digital photos of all tie down provisions required. Recommend using PowerPoint to clearly label tie down provisions. |
| 16 | Digital photos of track pads required on tracked vehicles |
| 17 | Require a technical drawing or sketch of the top view of the vehicle showing all tie down provisions and their rated capacities in all directions. |
| 18 | Tie down provisions cannot be open hook. They must be closed loop. If clevis will be added to a tie down provision, the rated capacity of clevis must be provided. |
| 19 | Note the type of aircraft certification requested i.e. C-130, C-5, C-17. |
| 20 | Note the proposed shipping date. |
| 21 | Vehicle rating data for lines HH and JJ can frequently be found on vehicle data plates. |
| 22 | Weights listed at lines GG and II must be actual weights of vehicle prepared for airlift. |
| 23 | Axle weights listed at line II should equal the Gross vehicle weight at line GG. |
| 24 | Actual weights cannot exceed rated weight capacities. |
| 25 | M Factor may be required for certification for C5 aircraft. The M factor is the percentage of the tire tread that contacts floor surfaces within the tire footprint. A ratio of rubber verses open space within the tire footprint may also be provided. Also note that if tires are inflated above 100 psi, ATTLA needs to know if tires may be deflated to less than or equal to 100 psi and remain within manufacturer tolerances for safe highway travel at weight supported by tire. |
| 26 | Venting requirements for sealed or low ventilation containers to prevent fragmentation or explosion during aircraft rapid decompression. Examples are ISO containers, cryogenic vessels, and personnel transport modules. See MIL-STD-1791 or MIL-STD-810 for latest criteria. Below is a copy of the basic equation that can be used to verify if the shelter has enough available open area to allow the decompression of its contained air volume in the case of a rapid decompression during air transport (8.3 psi change in pressure in 15 seconds). The equation can be simplified to the following two forms: |
1. t = 0.0026 x V/A time required for a container with an air volume of V (cubic feet) and an escape area of A (square feet)
2. A = 0.0001825 x V Escape area required to allow the decompression of a container with an air volume of V (cubic feet) to decompress or equalize the internal container pressure to the external container pressure in 15 seconds.
This method of validation is not necessary if the container has the structural capability to withstand an 8.3 psi pressure differential without any of its components becoming an explosive, or the residual pressure in 15 seconds. Let ATTLA know your trailer, container, shelter, van box capacity in this regard one way or the other.
* Note that the shipper may have to contact the manufacturer to obtain this information.
| 27 | Shipper must confirm that all attached/mounted items will withstand all required G Forces. | |
| * Note that items mounted or secured to the vehicle must be capable of withstanding 3Gs forward, 1.5Gs lateral left/right and aft, 2Gs vertical up and 4.5Gs vertical down. | Confirmation of mounted item security is validated by ATTLA following receipt of Finite Element Analysis or Aberdeen Proving Ground Rail Impact and Mobility Testing Reports. | |
| 28 | Messages greater that 6MB should be broken down into multiple smaller messages and sent at the same time. | |
| 29 | Additional information may be requested by ATTLA to aid in the certification process. | |
| 30 | The certification process is a very detailed, lengthy process. It may take some time to gather documentation for the package. Once the package has been submitted to ATTLA it may take up to 120 days for evaluation and issue of certification letter. | |
| 31 | If there are modifications causing the exterior dimensions or weights to exceed those specified in the certification memo, one of the other memo provisions is affected, or if one of the "Special Considerations" is added, the Federal Sponsor must be notified. | |
| 32 | The more detailed information provided to assist with certification process the easier and faster the process will go. | |
| 33 | Mobility Testing: Typically performed on Military vehicles to validate capabilities including, cross country, off road, tilt, rail impact, steering, braking, loading, tiedown, lifting, etc. This is relevant because it contains data on suspension and tiedown capabilities |
Additional Information Required for Helicopter Certification
| 1 | What are the axle/strut ratings on the helicopter? If the shipper cannot provide this data, can they prove the helicopter landing gear/struts will sustain a 4.5G download |
| 2 | Do all the rotor blades fold back like the Blackhawk? Does the user plan or removing the blades if this is not possible? Does the user plan on removing only two blades if this is not possible? |
| 3 | Does the shipper have a pre-fabricated winch bridle for loading operations capable of use while winching the helicopter on backwards or forwards? |
| 4 | Are the main landing gear struts capable of being raised to accommodate a higher approach angle (this means less approach shoring)? If so, what is the forward ground clearance or approach angle under the front end of the helicopter? |
Verification/validation of tiedown capacities either via testing or analysis is required
General Info
| File Number | ||
| Michael F Schneider: Assigned by ATTLA | 201x.xx.xx | |
| Vehicle Type | Mobility Tested? |
Nomenclature
| Manufacturer |
| Model |
| National Stock Number |
| NATO Stock Number |
| Point of Contact | Role |
| Name | |
| Organization | |
| Com. Phone Number |
Michael F Schneider: Please Include Area/Country Code
| DSN |
| Address |
| City, State, Country, Zip/Postal Code |
Federal Sponsor Michael F Schneider: Michael F Schneider:
Leave blank if same as above Michael F Schneider: See Instructions Tab, Item 33 Mobility testing is performed on Military Vehicles to verify capabilities for cross country, off road, etc.
| Agency/Unit/MAJCOM: |
| Name |
| Com. Phone Number |
Michael F Schneider: Please Include Area/Country Code
| Michael F Schneider: Please Include Area/Country Code | DSN |
| Address | |
| City, State, Country, Zip/Postal Code |
| Wheeled | |||
| Notes/Comments: | Checklist | Tracked | |
| Data | Dimensional | Trailer type 1 | |
| Tiedown | Trailer type 2 | ||
| Weights | Aircraft | ||
| Ratings | Helo | ||
| Shelter-Container | |||
| Pictures | Front | Crane | |
| Rear | Forklift | ||
| Left side | Telehandler | ||
| Right side | Other | ||
| Tiedowns |
| Drawings | Top | |
| Front | Contractor | |
| Rear | Federal Sponsor | |
| Side(s) | NATO Ally | |
| Tiedown | US Ally | |
| Other |
Verification/validation of tiedown capacities either via testing or analysis is required
Wheeled Vehicle
| WHEELED VEHICLE DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| N. | Pintle Distance | |||||||
| O. | Pintle Ht | |||||||
| P. | Kingpin Height | |||||||
| Q. | Kingpin to First Axle Distance | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels |
WHEEL DATA INPUT
| X. | Axle Articulation (Deg)/Travel | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| Ratio of Tread Contact Area to Footprint Area (M-Factor always <1) |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| MM. | Pintle Hook Rating | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| Z - Vertical Dimension: distance to ground |
Verification/validation of tiedown capacities either via testing or analysis is required
Tracked Vehicle
| TRACKED VEHICLE DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from road wheel 1 is XX" | → | Is maximum height forward or aft of road wheel 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| M. | Rear Ground Clearance | |||||||
| T. | Trackbase |
AXLE DATA INPUT
| X. | Axle Articulation (Deg)/Travel |
| Y. | Number of Axles |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| TRACKED VEHICLE DATA | Y - Lateral Dimension: distance to the centerline of item | |||||||||
| Z - Vertical Dimension: distance to ground | ||||||||||
| QQ. | OVERALL TRACK WIDTH | |||||||||
| RR. | WIDTH OF EACH TRACK | |||||||||
| SS. | DISTANCE BETWEEN TRACKS (C. | |||||||||
| Length | Width | |||||||||
| TT. | TRACK PAD GROUND CONTACT AREA | |||||||||
| UU. | NUMBER OF ROAD WHEELS | |||||||||
| VV. | ROAD WHEEL AXLE SPACING | |||||||||
| WW. | TYPE OF SUSPENSION | |||||||||
| XX. | CLEAT DEPTH | |||||||||
| YY. | PSI OF TRACK ON SURFACE | |||||||||
| ZZ. | ROAD WHEEL LOADS | See Table Below | ||||||||
| (HARD SURFACE, LEVEL GROUND) |
| INDIVIDUAL ROAD WHEEL LOADS |
| (TRAVELING WEIGHT, FRONT TO REAR) |
LEFT RIGHT
| #1 | #1 |
| #2 | #2 |
| #3 | #3 |
| #4 | #4 |
| #5 | #5 |
| #6 | #6 |
| #7 | #7 |
| #8 | #8 |
| #9 | #9 |
| #10 | #10 |
Verification/validation of tiedown capacities either via testing or analysis is required
Trailer Type 1
| TRAILER TYPE 1 DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| N. | Fifth Wheel If Applicable | |||||||
| O. | Fifth Wheel Height If Applicable | |||||||
| P. | Lunette/Kingpin Height | |||||||
| Q. | Lunette/Kingpin to First Axle Distance | Length | Width | |||||
| R. | Landing Gear Pad Area | |||||||
| S. | Landing Gear Distance | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels |
WHEEL DATA INPUT
| X. | Axle Articulation (Deg)/Travel | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| WEIGHT DATA INPUT |
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| LL. | Landing Gear Rating (per Leg) | |||||||||
| MM. | Fifth Wheel Rating | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| TRAILER DATA | Y - Lateral Dimension: distance to the centerline of item | |||||||||
| Z - Vertical Dimension: distance to ground | ||||||||||
| Max Anticipated Tongue Weight | ||||||||||
| Manufacturers Max Tongue Weight | ||||||||||
| Tare weight/weight of trailer empty | ||||||||||
| Tongue Weight for Empty Trailer | ||||||||||
| How many inches do the axles travel in the upward direction before they bottom out on the axle stops? |
Type 1
Trailer Type 2
| TRAILER TYPE 2 DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| O. | Fifth Wheel Height If Applicable | |||||||
| P. | Lunette/Kingpin Height | |||||||
| Q. | Lunette/Kingpin to First Axle Distance | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels | |||||||
| WHEEL DATA INPUT |
| X. | Axle Articulation (Deg)/Travel | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| WEIGHT DATA INPUT |
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| TRAILER DATA | Y - Lateral Dimension: distance to the centerline of item | |||||||||
| Z - Vertical Dimension: distance to ground | ||||||||||
| Max Anticipated Tongue Weight | ||||||||||
| Manufacturers Max Tongue Weight | ||||||||||
| Tare weight/weight of trailer empty | ||||||||||
| Tongue Weight for Empty Trailer | ||||||||||
| How many inches do the axles travel in the upward direction before they bottom out on the axle stops? |
Aircraft
| AIRCRAFT DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width/Wingspan | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels | |||||||
| V. | Propeller Diameter | |||||||
| W. | Number of Blades on Propeller |
WHEEL DATA INPUT
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| WEIGHT DATA INPUT |
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| Z - Vertical Dimension: distance to ground |
Verification/validation of tiedown capacities either via testing or analysis is required
Helo
| HELICOPTER DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels | |||||||
| W. | Number of Blades on Rotor | |||||||
| WHEEL DATA INPUT |
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| WEIGHT DATA INPUT |
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| Z - Vertical Dimension: distance to ground |
Shelter-Container
| SHELTER-CONTAINER DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |
| A. | Length | |||
| B. | Width | |||
| C. | Reduced Width | |||
| D. | Height at Front of Shelter | |||
| E. | Maximum Height | Distance from front is XX" | ||
| F. | Height at Rear of Shelter |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | ||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | ||||||||
| Front Provision Positions | |||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| MIL-STD-209K data - Longitudinal | X | ||||||||
| Lateral | Y | ||||||||
| Vertical | Z | ||||||||
| Overall Capacity | Side Provision Positions | ||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| MIL-STD-209K data - Longitudinal | X | ||||||||
| Lateral | Y | ||||||||
| Vertical | Z | ||||||||
| Overall Capacity | Rear Provision Positions | ||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 |
| MIL-STD-209K data - Longitudinal | X | ||||||||
| Lateral | Y | ||||||||
| Vertical | Z | ||||||||
| Overall Capacity | |||||||||
| X - Longitudinal Dimension: distance to the front of item | |||||||||
| SHELTER/CONTAINER DATA | Y - Lateral Dimension: distance to the centerline of item | ||||||||
| Z - Vertical Dimension: distance to ground | |||||||||
| Certification (JOCOTAS, CSC, ISO, etc. | |||||||||
| Total floor contact area | |||||||||
| Escape Area, A (See Instructions) | |||||||||
| Contained air volume, V | |||||||||
| Palletized (Y/N) | |||||||||
| Chain gate allowed (Y/N) |
Crane
| CRANE DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |||||
| A. | Length | |||||||
| B. | Width/Wingspan | |||||||
| C. | Reduced Width | (check 1 box) | ||||||
| D. | Height at Front of Vehicle | Forward | Aft | |||||
| E. | Maximum Height | Distance from front axle is XX" | → | Is maximum height forward or aft of axle 1? | ||||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||||||
| G. | Lower Forward Overhang | |||||||
| H. | Upper Forward Overhang | Approach | ||||||
| I. | Lower Rear Overhang | |||||||
| J. | Upper Rear Overhang | Departure | ||||||
| K. | Forward Ground Clearance | |||||||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||||||
| M. | Rear Ground Clearance | |||||||
| O. | Fifth Wheel/Pintle Ht | |||||||
| T. | Wheelbase | |||||||
| U. | Width Outside Wheels | |||||||
| WHEEL DATA INPUT |
| X. | Axle Articulation (Deg)/Travel | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| Ratio of Tread Contact Area to Footprint Area (M-Factor always <1) |
CRANE DATA INPUT
| Telescoping boom & Carriage weight | |
| Tire Manufacturer | |
| Are the tires air, foam or fluid filled | |
| Bucket Weight Resting on Floor | |
| Foot Print Dimensions of bucket | length |
| width |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Boom Restraint system (Please describe) | Y - Lateral Dimension: distance to the centerline of item | |||||||||
| Z - Vertical Dimension: distance to ground |
Forklift
| FORKLIFT DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |
| A. | Length | |||
| B. | Max Width | |||
| C. | Width Outside Front Wheels | |||
| D. | Width Outside Rear Wheels | |||
| E. | Min Height of Carriage | |||
| F. | Max Height of Carriage | |||
| G. | Min Height of Tine | |||
| H. | Max Height of Tine | |||
| I. | Maximum Height | Distance from front axle is XX" | ||
| J. | Height at Rear of Vehicle | |||
| K. | Lower Forward Overhang | |||
| L. | Upper Forward Overhang | |||
| M. | Lower Rear Overhang | |||
| N. | Upper Rear Overhang | |||
| O. | Forward Ground Clearance | |||
| P. | Mid-Wheelbase Ground Clearance | |||
| Q. | Rear Ground Clearance | |||
| R. | Pintle Ht | |||
| S. | Wheelbase | |||
| T. | Forward Carriage Angle | |||
| T1 | Rear Carriage Angle | |||
| U. | Outer Tine Width | |||
| V. | Single Tine Width |
| X. | Axle Articulation (Deg)/Travel (unit) | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear, unit) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure (unit of pressure) | |||||
| EE. | Tire Contact Length (unit) | |||||
| FF. | Tire Contact Width (unit) | |||||
| Tire Diameter | ||||||
| Ratio of Tread Contact Area to Footprint Area (M-Factor always <1) |
| Are the tires air, foam or fluid filled? |
| Carriage & Tine Weight |
| Foot Print Dimensions of Carriage & Tines |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| MM. | Pintle Hook Rating | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| Z - Vertical Dimension: distance to ground |
Telehandler
| TELEHANDLER DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |
| A. | Length | |||
| B. | Width | |||
| C. | Reduced Width | |||
| D. | Height at Front of Vehicle | |||
| E. | Maximum Height | Distance from front axle is XX" | ||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||
| G. | Lower Forward Overhang | |||
| H. | Upper Forward Overhang | Approach | ||
| I. | Lower Rear Overhang | |||
| J. | Upper Rear Overhang | Departure | ||
| K. | Forward Ground Clearance | |||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||
| M. | Rear Ground Clearance | |||
| O. | Pintle Ht | |||
| T. | Wheelbase | |||
| U. | Width Outside Wheels |
WHEEL DATA INPUT
| X. | Axle Articulation (Deg)/Travel (unit) | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing's (Front to Rear, unit) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure (unit of pressure) | |||||
| EE. | Tire Contact Length (unit) | |||||
| FF. | Tire Contact Width (unit) | |||||
| Tire Diameter | ||||||
| Ratio/Percentage of Tread vs. Open Space within the Tire Ground Contact Area |
| Tire Manufacturer? |
| Are the tires air, foam or fluid filled? |
TELEHANDLER DATA INPUT
| Carriage & Tine Weight |
| Foot Print Dimensions of Carriage & Tines |
Telehandler telescoping boom & Carriage weight
Carriage Ground Clearance Michael F Schneider: Michael F Schneider:
Vertical distance between bottom of fork carriage and ground when the tines are resting flat on ground
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| MM. | Pintle Hook Rating | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| X - Longitudinal Dimension: distance to the front of item | ||||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| Z - Vertical Dimension: distance to ground |
Verification/validation of tiedown capacities either via testing or analysis is required
Other
| OTHER DATA SHEET | File Number | 201x.xx.xx |
| DIMENSION DATA INPUT | Length |
Michael F Schneider: See Instructions Tab, Item 3.
| Pressure | |
| Michael F Schneider: See Instructions Tab, Item 3. | Weight |
Michael F Schneider: See Instructions Tab, Item 3.
| Unit of Measure | in | psi | lbm | |
| A. | Length | |||
| B. | Width/Wingspan | |||
| C. | Reduced Width | |||
| D. | Height at Front of Vehicle | |||
| E. | Maximum Height | Distance from front axle is XX" | ||
| F. | Height at Rear of Vehicle | Instead of lower overhangs/ground clearances, angles may be given | ||
| G. | Lower Forward Overhang | |||
| H. | Upper Forward Overhang | Approach | ||
| I. | Lower Rear Overhang | |||
| J. | Upper Rear Overhang | Departure | ||
| K. | Forward Ground Clearance | |||
| L. | Mid-Wheelbase Ground Clearance | Cresting | ||
| M. | Rear Ground Clearance | |||
| N. | Fifth Wheel/Pintle Distance | |||
| O. | Fifth Wheel/Pintle Ht | |||
| P. | Lunette/Kingpin Height | |||
| Q. | Lunette/Kingpin to First Axle Distance | Length | Width | |
| R. | Landing Gear Pad Area | |||
| S. | Landing Gear Distance | |||
| T. | Wheelbase / Trackbase | |||
| U. | Width Outside Wheels | |||
| V. | Propeller Diameter | |||
| W. | Number of Blades on Propeller/Rotor |
WHEEL DATA INPUT
| X. | Axle Articulation (Deg)/Travel | |||||
| Y. | Number of Axles | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | |||
| Z. | Axle Spacing (Front to Rear) | |||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| AA. | Number of Wheels per Axle | |||||
| BB. | Tire Size (xx R zz) | |||||
| CC. | Ply Rating | |||||
| DD. | Tire Pressure | |||||
| EE. | Tire Contact Length | |||||
| FF. | Tire Contact Width | |||||
| Tire Diameter | ||||||
| WEIGHT DATA INPUT |
| GG. | Gross Vehicle Weight | |||||||||
| HH. | Gross Vehicle Weight Rating (GVWR) | |||||||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||||||
| II. | Axle Weights (Front to Rear) | |||||||||
| JJ. | Axle Ratings (Front to Rear) | |||||||||
| KK. | Tire Load Rating (55 MPH/88KPH) | |||||||||
| LL. | Landing Gear Rating (per Leg) | |||||||||
| MM. | Fifth Wheel Rating | |||||||||
| Front Provision Positions | ||||||||||
| NN. | Number of Front Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Side Provision Positions | |||||||||
| OO. | Number of Side Tiedowns (Each Side) | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | Rear Provision Positions | |||||||||
| PP. | Number of Rear Tiedowns | Provision | 1 | 2 | 3 | 4 | 5 | 6 | 7 | |
| MIL-STD-209K data - Longitudinal | X | |||||||||
| Lateral | Y | |||||||||
| Vertical | Z | |||||||||
| Overall Capacity | ||||||||||
| TRACKED VEHICLE DATA | X - Longitudinal Dimension: distance to the front of item | |||||||||
| Y - Lateral Dimension: distance to the centerline of item | ||||||||||
| QQ. | OVERALL TRACK WIDTH | Z - Vertical Dimension: distance to ground | ||||||||
| RR. | WIDTH OF EACH TRACK | |||||||||
| SS. | DISTANCE BETWEEN TRACKS (C. | |||||||||
| Length | Width | |||||||||
| TT. | TRACK PAD GROUND CONTACT AREA | |||||||||
| UU. | NUMBER OF ROAD WHEELS | |||||||||
| VV. | ROAD WHEEL AXLE SPACING | |||||||||
| WW. | TYPE OF SUSPENSION | |||||||||
| XX. | CLEAT DEPTH | |||||||||
| YY. | PSI OF TRACK ON SURFACE | |||||||||
| ZZ. | ROAD WHEEL LOADS | See Table Below | ||||||||
| (HARD SURFACE, LEVEL GROUND) |
| INDIVIDUAL ROAD WHEEL LOADS |
| (TRAVELING WEIGHT, FRONT TO REAR) |
LEFT RIGHT
| #1 | #1 |
| #2 | #2 |
| #3 | #3 |
| #4 | #4 |
| #5 | #5 |
| #6 | #6 |
| #7 | #7 |
| #8 | #8 |
| #9 | #9 |
| #10 | #10 |
Pictures-Drawings
| PICTURES | File Number | 201x.xx.xx |
| Please include all necessary pictures to help us evaluate the vehicle. |
T-loader converter
| T-LOADER CONVERTED DATA SHEET | File Number | 201x.xx.xx | |
| DIMENSION DATA INPUT | Length | ||
| Michael F Schneider: DON'T CHANGE THIS. This is what the data is converted too | Pressure |
Michael F Schneider: DON'T CHANGE THIS. This is what the data is converted too Weight Michael F Schneider: DON'T CHANGE THIS. This is what the data is converted too
| Wheeled | Converter Instructions: | |||||
| Unit of Measure | in | psi | lbm | Tracked | ||
| A. | Length | 0 | Cargo Type | Trailer type 1 | Select the appropriate cargo type from the "Cargo Type" drop down box to populate the sheet. SAVE THE DATA SHEET! T-Loader will not read the data if the sheet is not saved. Click the "Import Data Sheet" button on the T-Loader Input page to import the data. | |
| B. | Width/Wingspan | 0 | Trailer type 2 | |||
| C. | Reduced Width | 0 | Aircraft | |||
| D. | Height at Front of Vehicle | 0 | Helo | |||
| E. | Maximum Height | 0 | Shelter-Container | |||
| F. | Height at Rear of Vehicle | 0 | Instead of lower overhangs/ground clearances, angles may be given | Crane | ||
| G. | Lower Forward Overhang | 0 | Forklift | |||
| H. | Upper Forward Overhang | 0 | Approach | Telehandler | ||
| I. | Lower Rear Overhang | 0 | 0 | Other | ||
| J. | Upper Rear Overhang | 0 | Departure | 1 | ||
| K. | Forward Ground Clearance | 0 | 0 | |||
| L. | Mid-Wheelbase Ground Clearance | 0 | Cresting | |||
| M. | Rear Ground Clearance | 0 | 0 | |||
| N. | Fifth Wheel/Pintle Distance | 0 | ||||
| O. | Fifth Wheel/Pintle Ht | 0 | ||||
| P. | Lunette/Kingpin Height | 0 | ||||
| Q. | Lunette/Kingpin to First Axle Distance | 0 | Length | Width | ||
| R. | Landing Gear Pad Area | 0 | 0 | 0 | ||
| S. | Landing Gear Distance | 0 | ||||
| T. | Wheelbase / Trackbase | 0 | ||||
| U. | Width Outside Wheels | 0 | ||||
| V. | Propeller Diameter | 0 | ||||
| W. | Number of Blades on Propeller/Rotor | 0 |
WHEEL DATA INPUT
| X. | Axle Articulation (Deg)/Travel | 0 | |||||
| Y. | Number of Axles | 0 | |||||
| 1st to 2nd | 2nd to 3rd | 3rd to 4th | 4th to 5th | ||||
| Z. | Axle Spacing (Front to Rear) | 0 | 0 | 0 | 0 | ||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | |||
| AA. | Number of Wheels per Axle | 0 | 0 | 0 | 0 | 0 | |
| BB. | Tire Size (xx R zz) | 0 | 0 | 0 | 0 | 0 | |
| CC. | Ply Rating | 0 | 0 | 0 | 0 | 0 | |
| DD. | Tire Pressure | ||||||
| Michael F Schneider: These are not converted | 0 | 0 | 0 | 0 | 0 | ||
| EE. | Tire Contact Length | 0 | 0 | 0 | 0 | 0 | |
| FF. | Tire Contact Width | 0 | 0 | 0 | 0 | 0 |
WEIGHT DATA INPUT
| GG. | Gross Vehicle Weight | 0 | ||||
| HH. | Gross Vehicle Weight Rating (GVWR) | 0 | ||||
| 1st Axle | 2nd Axle | 3rd Axle | 4th Axle | 5th Axle | ||
| II. | Axle Weights (Front to Rear) | 0 | 0 | 0 | 0 | 0 |
| JJ. | Axle Ratings (Front to Rear) | 0 | 0 | 0 | 0 | 0 |
| KK. | Tire Load Rating (55 MPH/88KPH) | 0 | 0 | 0 | 0 | 0 |
| LL. | Landing Gear Rating (per Leg) | 0 | ||||
| MM. | Fifth Wheel Rating | 0 | ||||
| NN. | Front Tiedown Capacity | 0 | Quantity | 0 | ||
| MIL-STD-209K data | 0 | Longitudinal | ||||
| 0 | Lateral | |||||
| 0 | Vert | |||||
| OO. | Side Tiedown Capacity | 0 | Quantity | 0 | Each Side | |
| MIL-STD-209K data | 0 | Longitudinal | ||||
| 0 | Lateral | |||||
| 0 | Vert | |||||
| PP. | Rear Tiedown Capacity | 0 | Quantity | 0 | ||
| MIL-STD-209K data | 0 | Longitudinal | ||||
| 0 | Lateral | |||||
| 0 | Vert |
TRACKED VEHICLE DATA
| QQ. | OVERALL TRACK WIDTH | 0 | ||
| RR. | WIDTH OF EACH TRACK | 0 | ||
| SS. | DISTANCE BETWEEN TRACKS (C. | 0 | ||
| Length | Width | |||
| TT. | TRACK PAD GROUND CONTACT AREA | 0 | 0 | 0 |
| UU. | NUMBER OF ROAD WHEELS | 0 | ||
| VV. | ROAD WHEEL AXLE SPACING | 0 | ||
| WW. | TYPE OF SUSPENSION | 0 | ||
| XX. | CLEAT DEPTH | 0 | ||
| YY. | PSI OF TRACK ON SURFACE |
Michael F Schneider: This is not converted
| 0 | ||
| ZZ. | ROAD WHEEL LOADS | See Table Below |
| (HARD SURFACE, LEVEL GROUND) |
| INDIVIDUAL ROAD WHEEL LOADS |
| (TRAVELING WEIGHT, FRONT TO REAR) |
LEFT RIGHT
| #1 | 0 | #1 | 0 |
| #2 | 0 | #2 | 0 |
| #3 | 0 | #3 | 0 |
| #4 | 0 | #4 | 0 |
| #5 | 0 | #5 | 0 |
| #6 | 0 | #6 | 0 |
| #7 | 0 | #7 | 0 |
| #8 | 0 | #8 | 0 |
| #9 | 0 | #9 | 0 |
| #10 | 0 | #10 | 0 |
image1.jpeg image2.jpeg image3.png image4.png image5.png image6.png image7.png image8.png image9.png image10.jpeg image11.png image12.png image13.png image14.png image15.png image16.jpeg image17.jpeg image24.png image18.png image19.png image20.png image21.png image22.png image23.png
File details come from the government source that posted it. Updated .