Attachment 22a.1.e - ALH-215333 00 S-280 CASS INSTALLATION.PDF
PDF 519 KB Posted
- Attached to
- DRAFT RFP for Integrated Battle Command System (IBCS) LRIP/FRP Federal contract opportunity
- Solicitation number
- W31P4Q-20-R-0015
About this file
This document contains engineering drawings and specifications for the installation of a CASS (Common Aviation Support System) on an Integrated Battle Command System. The drawings depict the installation of ground cables and hardware on various frame numbers to integrate the CASS into the IBCS shelter. Details include cable routes, grounding locations, and fastener types. Section and detail views provide additional installation guidance.
The related federal contract opportunity is a draft Request for Proposal for the Low Rate Initial Production/Full Rate Production of IBCS hardware. The Army Materiel Command is seeking proposals to produce IBCS end items in accordance with supplied technical data packages and specifications. Engineering changes may be required for obsolescence, new capabilities, and export considerations. The RFP has been posted for comment only and the government is not currently accepting proposals in response to this draft posting.
View the file
Other files for this federal contract opportunity
Show all 50
DRAFT RFP for Integrated Battle Command System (IBCS) LRIP/FRP has more files on GovTribe.
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CAD MAINTAINED. CHANGES SHALL BE
INCORPORATED BY THE DESIGN ACTIVITY.
Official version of this document is electronically controlled in an online PLM system. Verify version level prior to use.
WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et. seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et. seq. Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.
Distribution Statement C: Distribution Authorized to the U.S. Government Agencies and their contractors; Administrative and Operational Use; 05 Jan 2007. Other requests for this document shall be referred to ATTN: SFAE-MSLS-IAMD, Program Executive Office Missiles and Space, Integrated Air and Missile Defense Project Office.
Bldg. 5250 Martin Road, Huntsville, AL 35898-8000.
Copyright 2017 Northrop Grumman Systems Corporation
-001 2
(RACK INSTALLATION) -001
(SHELTER EXTERIOR)
NOTES:
1. APPLICABLE STANDARDS/SPECIFICATIONS:
ASME Y14.5M - 1994, DIMENSIONING AND TOLERANCING
2 RACK RAILS SHOWN FOR REFERENCE ONLY.
3 REMOVE EXISTING HARDWARE FROM FN 1 AT INDICATED LOCATIONS. INSTALL GROUND
CABLE (ALH-100091-0048) TO FN 1 USING EXISTING HARDWARE AND THEN INSTALL FREE
END OF CABLE TO BUSS BAR AT RACK REAR PER PER APPLICABLE INTERCONNECT
DIAGRAM (ALH-215001).
4 REMOVE SURFACE FINISH FROM FN 6 CREATING AN AREA OF BARE METAL SLIGHTLY
LARGER THAN THE DIAMETER OF THE TERMINAL RING USING THE APPROPRIATE
METHOD IF REQUIRED. INSTALL GROUND CABLE (ALH-100153-0024) TO FN 6 USING FN 44
AND THEN INSTALL FREE END OF CABLE TO FN 9.
5 USE FN 24 AS REQUIRED FOR PROPER CABLE MANAGEMENT.
6 APPLY FN 23 TO THREADS OF FN 22 PRIOR TO INSTALLATION.
7 INSTALL FN 31 LANYARD TO FN 9 USING FN 38 THRU FN 41.
SIZE CAGE CODE
SCALE SHEET
CONTRACT NO.
ENGR
PROJECT APPROVAL
W31P4Q-08-C-0418
1 OF 3NONE
R. LEFTWICH 2017/07/21
AL
H
-2
D 318U8 00
D
8 7 6 5 3 1
D
C
A
12345678
A
B
C
CHECKED
DESIGN ACTIVITY
APPROVALS DATE
DWG NO.
UNLESS OTHERWISE SPECIFIED:
1. DIMENSIONS ARE IN INCHES
2. LOCATE MARKING APPROXIMATELY WHERE SHOWN
3. DIMENSIONS APPLY BEFORE PLATING OR COATING
4. TOLERANCES ARE:
DECIMALS
.X .06
.XX .03
.XXX .010
ANGLES
MACHINED .5
LOCATING .5
FORMED 2
DO NOT SCALE DRAWING
THIRD ANGLE PROJECTION
APPLICATION
NEXT ASSY USED ON ALH-215333
2017/07/21J. MANSON
2017/07/21C. ETHRIDGE
REV.
D W
G N
O S
H R
E V
S-280 CASS INSTALLATION
M. STRICKLIN 2017/07/21
CCB CHAIR
DESCRIPTION
REVISION HISTORY
DATE APPROVEDREV
NG-IPS-ALH8-SW-D10 (IBCS)
00 DR-536 2017/07/21 MBS
SEE SEPARATE PARTS LIST
Official version of this document is electronically controlled in an online PLM system. Verify version level prior to use.
4X NS, FS
-001 2
2(ALH-100091-0048) 3
REF
C
17 FS
FS 6
4X
3X
1 REF
DETAIL C
SCALE 1 : 1
FS
FS
2X
4X
(FN 1 AND FN 2 NOT SHOWN FOR CLARITY)
NS, FS
(RACK RAILS NOT SHOWN FOR CLARITY)
R E
V S
H D
W G
N O
REV.
ALH-215333
DWG NO.
C
B
A
8 7 6 5 4 3 2 1
A
C
D
135678
D
00318U8D
AL
H
-2
NONE 2 OF 3 SHEET SCALE
CAGE CODESIZE
NGMS-ALH8-SW-D06
Se e
Sh ee t 1 fo r C op yr ig ht R es tri ct io ns
Official version of this document is electronically controlled in an online PLM system. Verify version level prior to use.
EE
F
AA
6 4
SHELTER REAR
SECTION E-E
SCALE: 1 : 4
(ALH-100153-0024) 4
(SHELTER NOT SHOWN FOR CLARITY)
7REF
DETAIL F
SCALE 1 : 2
(ALH-214088-001, PART OF FN 7, NOT SHOWN FOR CLARITY)
(ALH-100153-0024) 4
5X
FS
FS
REF
FS
FS
FS
8X
97 4
FS
FS
FS
VIEW A-A
SCALE 1 : 4
4X
(SHELTER NOT SHOWN FOR CLARITY)
R E
V S
H D
W G
N O
REV.
ALH-215333
DWG NO.
C
B
A
8 7 6 5 4 3 2 1
A
C
D
135678
D
00318U8D
AL
H
-2
NONE 3 OF 3 SHEET SCALE
CAGE CODESIZE
NGMS-ALH8-SW-D06
Se e
Sh ee t 1 fo r C op yr ig ht R es tri ct io ns
| Sheet1 |
| Drawing View15 |
| Drawing View30 |
| Sheet2 |
| Drawing View17 |
| Drawing View18 |
| Detail View C (1 : 1) |
| Drawing View31 |
| Sheet3 |
| Drawing View24 |
| Section View E-E |
| Detail View F (1 : 2) |
| Drawing View32 |
File details come from the government source that posted it. Updated .