Attachment 1- WID MATT_ RTM.xlsx
XLSX spreadsheet 43 KB Posted
- Solicitation number
- M67854-21-R-2053
- Issued by
-
United States Marine Corps
About this file
This document contains a Requirements Traceability Matrix (RTM) and related federal contract opportunity solicitation for the Wired in the Defense (WID) Marine Analog Tactical Telephone (MATT).
The RTM specifies technical requirements for the MATT including that it must be handheld, weigh less than two pounds with batteries, have integrated speaker and volume control, visual and audio call indicators, color options, a binding post terminal, strain relief, silent mode capability, and compatibility with military handsets. It must operate on batteries from both military and commercial sources with minimum standby and use times. The MATT must function in point-to-point and point-to-multipoint network configurations supporting a minimum of ten users over a kilometer distance. It must be compatible with common field wire types and not emit or be susceptible to radio frequencies across specified bands. Additional requirements cover environmental tolerances, electromagnetic interference standards, and workmanship quality.
The related solicitation is for the manufacture and delivery of the MATT to provide a wired command and control capability for the United States Marine Corps. It will operate in point-to-point or point-to-multipoint modes to provide redundant communication where radio frequency is denied or degraded, separate from data networks.
View the file
Other files
Show all 24
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
OneApp MATT 1.0 Consolidated RT
| Attachment 1- Requirements Traceabilty Matrix (RTM) dated 6 Oct 2020 | ||||||||
| M67854-21-R-2053 | ||||||||
| WID MATT RTM | ||||||||
| Capability ID | Spec ID | Spec Name | Specification Text | Met/Not Met | Proposed Value | Proposal Reference | Additional Info | |
| 3.1 | General | |||||||
| 4.c.5 | 3.01.01 | Handheld | The system shall be handheld. | |||||
| 4.c.5 | 3.01.02 | Weight | The system shall weigh less than one pound without batteries. | |||||
| 4.c.5 | 3.01.03 | Weight (Batteries) | The system shall weigh less than two pounds with batteries. | |||||
| 4.c.5 | 3.01.04 | Speaker | The system shall have an embedded speaker with volume control. | |||||
| 4.c.5 | 3.01.05 | Speaker Volume | The speaker volume control shall provide a range from 0 to 100 dB (± 3dB). | |||||
| 4.c.5 | 3.01.06 | Visual Incoming Call Indicator | The system shall provide the option for a visual indication for incoming call notification. | |||||
| 4.c.5 | 3.01.07 | Audio Incoming Call Indicator | The system shall provide the option for an audio indication for incoming call notification. | |||||
| 4.c.5 | 3.01.08 | Audio Outgoing Call Indicator | The system shall provide the option for a subdued audio indication for outgoing call initiation. | |||||
| 4.c.5 | 3.01.09 | Color | The system shall be either Green 383 Camouflage Chip Number 34094, Brown 383 Camouflage Chip Number 30051 or Black Camouflage Chip Number 37030. | |||||
| 4.c.5 | 3.01.10 | Binding Post | The system shall have a terminal binding post capable of accepting more than one wire. | |||||
| 4.c.5 | 3.01.11 | Strain Relief | The binding post shall have strain relief. | |||||
| 4.c.5 | 3.01.12 | Keypad | The system shall not have a keypad. | |||||
| 4.c.5 | 3.01.13 | Silent Mode | The system shall have the ability to put the audio ring in silent mode. | |||||
| 4.c.5 | 3.01.14 | Handset | The system shall provide the capability to connect to handsets available through the military supply system. | |||||
| 3.2 | Battery | |||||||
| 4.c.5 | 3.02.01 | Batteries (USMC) | The system shall have the capability to interchange batteries from the Marine Corps supply system. | |||||
| 4.c.5 | 3.02.02 | Batteries (Commercial) | The system shall have the capability to interchange batteries from commercially available sources. | |||||
| 4.c.5 | 3.02.03 | Battery Life (Standby) | The system shall have a battery standby life of at least 24 hours. | |||||
| 4.c.5 | 3.02.04 | Battery Life (In-Use) | The system shall have an active in-use battery life of at least 8 hours. | |||||
| 3.3 | Network Configuration | |||||||
| 4.c.5 | 3.03.01 | Network Configuration | The system shall operate in a point-to-point configuration. | |||||
| 4.c.5 | 3.03.02 | Point-to-Point | The system shall have a point-to-point distance of at least one kilometer. | |||||
| 4.c.5 | 3.03.03 | Point-to-Multipoint | The system shall operate in point-to-multipoint configuration. | |||||
| 4.c.5 | 3.03.04 | Users | In a multi-point configuration with 100-meter separation, a minimum of ten users shall participate without noticeable degradation. | |||||
| 4.c.5 | 3.03.05 | Full Duplex | The system shall be full duplex. | |||||
| 3.4 | Field Wire | |||||||
| 4.c.5 | 3.04.01 | WD1 | The system shall have the ability to operate over WD1. | |||||
| 4.c.5 | 3.04.02 | WF16 | The system shall have the ability to operate over WF16. | |||||
| 4.c.5 | 3.04.03 | CAT5 | The system shall have the ability to operate over CAT5. | |||||
| 4.c.5 | 3.04.04 | CAT6 | The system shall have the ability to operate over CAT6. | |||||
| 3.5 | Radio Frequencies | |||||||
| 4.g.(1) | 3.05.01 | ELF Emission | The system shall not emit RF electromagnetic radiation on the ELF frequency bands. | |||||
| 4.g.(1) | 3.05.02 | ELF Susceptibility | The system shall not be susceptible to RF electromagnetic radiation on the ELF frequency bands. | |||||
| 4.g.(1) | 3.05.03 | VHF Emission | The system shall not emit RF electromagnetic radiation on the VHF frequency bands. | |||||
| 4.g.(1) | 3.05.04 | VHF Susceptibility | The system shall not be susceptible to RF electromagnetic radiation on the VHF frequency bands. | |||||
| 4.g.(1) | 3.05.05 | HF Emission | The system shall not emit RF electromagnetic radiation on the HF frequency bands. | |||||
| 4.g.(1) | 3.05.06 | HF Susceptibility | The system shall not be susceptible to RF electromagnetic radiation on the HF frequency bands. | |||||
| 4.g.(1) | 3.05.07 | UHF Emission | The system shall not emit or is susceptible to RF electromagnetic radiation on the UHF frequency bands. | |||||
| 4.g.(1) | 3.05.08 | UHF Susceptibility | The system shall be susceptible to RF electromagnetic radiation on the UHF frequency bands. | |||||
| 3.6 | Setup | |||||||
| 5.c.(3) | ||||||||
| 4.c.5 | 3.06.01 | Setup | A point-to-point configuration shall take no more than 10 minutes to install and operate by a single user independent of the time it takes to lay the wire between the two handset locations. | |||||
| 3.7 | Environmental Requirements | |||||||
| 4.g.(3)(c) | 3.07.01 | Immersion | The system shall be able to operate as required following immersion in one meter of water for 30 minutes. | |||||
| 4.g.(4) | 3.07.02 | Transportability (Shock) | The system shall withstand shock associated with transport and functional handling in accordance with MIL-STD- 516.8. | |||||
| 4.g.(4) | 3.07.03 | Transportability (Vibrations) | The system shall withstand vibrations associated with transport in trucks and trailers, aircraft, watercraft, and rail car in accordance with MIL-STD-810H 514.8 Annex C. | |||||
| 4.e.(1) | 3.07.04 | Operational Temperature | The system shall operate throughout a temperature range of +32 to +104 degrees F. | |||||
| 4.e.(1) | 3.07.05 | Non-Operational Temperature | The system shall withstand temperatures throughout a temperature range from -40 to +149 degrees F (T), -40 to +158 degrees F (O). | |||||
| 4.e.(1) | 3.07.06 | Temperature Shock | The system shall withstand sudden changes in the temperature of the surrounding atmosphere without experiencing physical damage or deterioration in performance in accordance with MIL-STD-810H 503.7.. | |||||
| 4.g.(3)(c) | 3.07.07 | Rain | The system shall withstand exposure to rain, water spray, and dripping water during operation without experiencing physical damage or deterioration in performance in accordance with MIL-STD-810H 506.6.. | |||||
| 4.g.(3)(b) | 3.07.08 | Sand and Dust (Operation) | In the operational mode, the system shall meet full performance requirements under conditions of blowing dust and sand in winds up to 15 miles per hour. | |||||
| 4.g.(3)(b) | 3.07.09 | Sand and Dust (Storage) | In the storage modes, the system shall be protected from penetration by sand and dust in accordance with MIL-STD-810H 510.7. | |||||
| 4.g.(3)(c) | 3.07.10 | Salt Fog | The system shall withstand exposure to salt fog during operation without experiencing physical damage or deterioration in performance in accordance with MIL-STD-810H 509.7.. | |||||
| 4.g.(3)(c) | 3.07.11 | Humidity | The system shall operate when exposed to relative humidity up to 95% non-condensing in accordance with MIL-STD-810H 507.6. | |||||
| 4.g.(3)(a) | 3.07.12 | Operational Altitude | The system shall meet full performance between -1,300 ft below mean sea-level and 15,000 ft above mean sea-level. | |||||
| 4.g.(3)(a) | 3.07.13 | Non-Operational Altitude | The system shall not incur damage at altitudes up to 25,000 ft. above mean sea level. | |||||
| 3.8 | EMI | |||||||
| 4.g.(1) | 3.08.01 | CS114 | To control the electrical emissions and susceptibility characteristics of the system, the installation of its subsystems and associated interfaces shall conform with the following MIL-STD-461G performance requirements for Army Ground-based installation: CS 114 | |||||
| 4.g.(1) | 3.08.02 | CS115 | To control the electrical emissions and susceptibility characteristics of the system, the installation of its subsystems and associated interfaces shall conform with the following MIL-STD-461G performance requirements for Army Ground-based installation: CS115. | |||||
| 4.g.(1) | 3.08.03 | CS116 | To control the electrical emissions and susceptibility characteristics of the system, the installation of its subsystems and associated interfaces shall conform with the following MIL-STD-461G performance requirements for Army Ground-based installation: CS116. | |||||
| 4.g.(1) | 3.08.04 | CS118 | To control the electrical emissions and susceptibility characteristics of the system, the installation of its subsystems and associated interfaces shall conform with the following MIL-STD-461G performance requirements for Army Ground-based installation: CS118. | |||||
| 4.g.(1) | 3.08.05 | RS103 | To control the electrical emissions and susceptibility characteristics of the system, the installation of its subsystems and associated interfaces shall conform with the following MIL-STD-461G performance requirements for Army Ground-based installation: RS103. | |||||
| 3.9 | Workmanship | |||||||
| 4.c.5 | 3.09.01 | Fabrication Quality | Finished items and parts shall not exhibit poor materials and shall be free of defects. |
Attachment 1- RTM M67854-20-R-2053
Attachment 1- RTM M67854-20-R-2053
Attachment 1- RTM M67854-20-R-2053
File details come from the government source that posted it. Updated .