Attachment 0003 - CNR Compliance Matrix_FINAL_24 June 2021.xlsx
XLSX spreadsheet 40 KB Posted
- Attached to
- Combat Net Radio (CNR) Solicitation
- Solicitation number
- W15P7T-21-R-0009
About this file
This is a solicitation issued by the Army Contracting Command Aberdeen Proving Ground to procure a modernized Receiver Transmitter to replace existing Combat Network Radios on behalf of Program Executive Office Command Control Communications - Tactical and Project Manager Tactical Radios. The solicitation seeks proposals to provide hardware, software, engineering services, training, and sustainment support. Offerors must submit responses by July 5, 2021 to be considered. The solicitation includes exhibits outlining contract data requirements for areas such as engineering documentation, hardware, software, security, logistics, and sustainment. Attachments provide the performance requirements document, statement of work, compliance matrix, evaluation plans, pricing spreadsheet, and security classification specifications. The solicitation is designated controlled unclassified information and dissemination is restricted to eligible DoD contractors.
View the file
Other files
Show all 47
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
INSTRUCTION and NOTES TAB
Offeror:
Attachment – PRD Compliance Matrix Solicitation Number: W15P7T-21-R-0009
PRD Paragraph 3.1 Receiver Transmitter Nomenclature/Part #:
PRD Paragraph 3.5.3 Mounted CNR Radio Human Machine Interface (HMI) Nomenclature/Part #:
The purpose of "TAB A - PRD MATRIX" is for the Offeror to identify compliance or non-compliance with the PRD requirements that their proposed Mission-Ready Combat Networking Radio (CNR) achieves. The PRD Compliance Matrix is organized by rows identifying the PRD requirements (Attachment 0001). Columns 1-4 are organized as stated below.
Please include Offeror's name, identify the nomenclature/part #, provide responses in "Tab A - PRD MATRIX" Columns 1 and 4, and provide this document as part of the Offeror's Technical proposal in accordance with the Request for Proposal.
Column 1 – Compliant Y/N: For all thresholds and delayed thresholds identified, the Offeror shall indicate compliance with the PRD requirement by indicating a "Y" (Yes) or "N" (No) for the proposed CNR identified by the Nomenclature/Part Number at the top of this document. The Offeror shall not provide a response other than "Y" or "N" and shall not leave any threshold or delayed threshold requirement blank.
Column 2 – Gov FAT and Offeror FAT: This double column indicates whether the post-award First Article Test (FAT) is expected to be conducted by the Contractor (contract Awardee) at a contractor facility with Government witness, at a 3rd-party facility with Contractor and Government witness, or will be conducted by the Government at a Government facility. (For example, Government-led portions of the FAT include tests that require particular hardware (e.g., Forward Observer System (FOS), Advanced Field Artillery Tactical Data System (AFATDS), etc.) or specialized skills (e.g., F1/F1 retransmission, CUE, Saville Automatic Remote Keying (SARK), etc.) These columns identify the intended verification method that will be used in verifying the Contractor's CNR during FAT. Verification methods are defined in Section 4 of the PRD (Attachment 0001). Note: CERT = Certifications and Approval Verifications; T = Verification by Testing; A = Verification by Analysis; D = Verification by Demonstration.
Column 3 – Verification: This column identifies how the Government will verify the propsed CNR's ability to meet threshold requirements. The Test Case (TC) number corresponds to the First Article Testing Plan (Attachment 0005) for the Government-led portions of the FAT. “Contractor Format Test Report" refers to information provided by the Offeror as part of the FAT, as Contract Data Requirements List (CDRL) submissions, or included in the Offeror's Technical proposal. If “Contractor Format Test Report” is indicated, the Government intends to use the data provided by the Offeror to assist in verification of the capability. (For example, PRD requirements for Nuclear Biological Chemical in PRD Paragraph 3.1.5.5 and all sub-paragraphs is expected to be proven through FAT conducted by the Contractor and validated through test report(s) submitted to the Government. As another example, the status of the Offeror’s National Security Agency (NSA) certification (PRD Paragraph 3.1 requirement) shall be validated by the Offeror’s Technical proposal. Note: FAT overlap will occur as some functions are neccessary prior to executing other tests (e.g., Connectors and Interfaces per PRD Paragraph 3.1.1.5 and all subparagraphs).
Column 4 – Technical Proposal Citation: The Offeror shall provide the citation to their Technical proposal identifying unmet PRD Threshold requirement(s).
This document contains Controlled Unclassified Information (CUI) when filled in.
CONTROLLED BY: USAASC
CONTROLLED BY: PEO C3T PM TR PdM HMS CUI CATEGORY: CTI, EXPORT CONTROL (when filled in)
LIMITED DISSEMINATION CONTROL: FEDCON, NOFORM
DISTRIBUTION: D (when filled in) POC: Alan Clayton: (443) 395-2997
TAB A - PRD MATRIX
| Line | PRD Reference | Specification | Req | Column 1 | Column 2 | Column 3 | Column 4 | |
| Compliant Y/N | Offeror FAT | Gov FAT | Verification | Technical Proposal Citations | ||||
| This document contains Controlled Unclassified Information (CUI) when filled in. | CONTROLLED BY: USAASC |
CONTROLLED BY: PEO C3T PM TR PdM HMS CUI CATEGORY: CTI, EXPORT CONTROL (when filled in)
LIMITED DISSEMINATION CONTROL: FEDCON, NOFORM
DISTRIBUTION: D (when filled in) POC: Alan Clayton: (443) 395-2997 1 3.1 CNR Receiver-Transmitter (CNR-RT). The CNR-RT shall demonstrate:
*NSA Certification
| *Spectrum Standards Compliance | T | Cert | N/A | RFP Response and Contractor Format Test Reports | ||||
| 2 | 3.1.1 | Characteristics | T | |||||
| 3 | 3.1.1.1 | Frequency Range | T | T | N/A | TC 1.1.2 Spectral Mask | ||
| 4 | 3.1.1.1.1 | Shall cover the frequency range from 30-88 MHz for narrow band channels. | T | T | N/A | TC 1.1.2 Spectral Mask |
TC 1.1.3 Operating BW Range Testing
| 5 | 3.1.1.1.2 | Shall operate in 25kHz bandwidths supporting all modes of the legacy SINCGARS waveform and all modes of the upgraded SINCGARS 3.1 waveform. | T | T | N/A | TC 1.1.2 Spectral Mask |
| 6 | 3.1.1.2 | Transmit and Receive Characteristics | T | |||
| 7 | 3.1.1.2.1 | Voice shall have a 90% or greater Call Completion Rate (CCR) while meeting distance range requirements. | T | N/A | T | Multiple TCs under each supported mode |
TC 1.4.1 SINCGARS SCPT - Voice TC 1.4.2 SINCGARS SCCT - Voice TC 1.4.3 SINCGARS FHPT - Voice TC 1.4.4 SINCGARS FHCT – Voice TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) TC 1.4.10 SINCGARS FH3 Hopping Master (Voice) TC 1.4.13 SINCGARS SCPT - Voice TC 1.4.14 SINCGARS CT2 – Voice 8 3.1.1.2.2 Data shall have an 85% or greater Message Completion Rate (MCR) while meeting distance range requirements. T N/A T Multiple TCs under each supported mode TC 1.4.5 SINCGARS SCPT – Data TC 1.4.6 SINCGARS SCCT – Data TC 1.4.7 SINCGARS FHCT – Data TC 1.4.8 SINCGARS FHCT – Data TC 1.4.9 16 kbps Transparent Data Mode (TDM) TC 1.4.10 SINCGARS FH2 Hopping Master (Data) TC 1.4.10 SINCGARS FH3 Hopping Master (Data) TC 1.4.15 SINCGARS CT2 - Data 9 3.1.1.2.3 The CNR Set shall provide a voice call completion rate of at least 80% in F1/F1 or F1/F2 retransmission scenario with another CNR when measured at the receiving radio, not the retrans radio. T N/A T TC 1.4.11 SINCGARS F1/F2 Retransmit TC 1.5.1 SINCGARS F1/F1 Retransmit 10 3.1.1.2.4 CNR dismounted service shall have a single hop (point-to-point without relaying) range in open terrain no less than 5km. T N/A T TC 1.1.2 Spectral Mask Range Testing 11 3.1.1.2.5 Mounted CNR amplified service shall have a single hop (point-to-point without relaying) range in open terrain no less than 30km for SINCGARS. T N/A T TC 1.1.2 Spectral Mask Range Testing
| 12 | 3.1.1.2.6 | The RT shall be capable of continuous one hour transmit at an elevated (ambient) temperature of 71 degrees C. The RT shall supply a minimum of 30 dBm output power during this test. Rationale: This is a capability that exists in the legacy radio and lower performance is undesirable. Reference: A3307000-1 (dated 2012) LRU Product Specification For Receiver-Transmitter RT- 1523F(C)/U paragraph 3.10.2.13, Continuous transmit. | T | T | T | TC 2.9 Endurance |
| 13 | 3.1.1.2.7 | The CNR RT shall sustain no damage when a Radio Frequency (RF) output port is open or shorted. | T | T | N/A | Contractor Format Test Report |
| 14 | 3.1.1.3 | Physical Characteristics | T | |||
| 15 | 3.1.1.3.1 | The size of the CNR shall be equal to or less than the cubic measurement of a legacy RT-1523F in each dimension. This is inclusive of batteries necessary for 24 hours for dismounted operations. Note: The SINCGARS RT shall be capable of being installed in the existing SINCGARS mounting adapter (i.e., AM-7239). Width 13.4 cm (5.3 in), Height 8.7 cm (3.4 in), Depth 25.8 cm (10.15 in). | T | T | T | TC 2.2 Physical Size Characteristics |
| 16 | 3.1.1.3.2 | The weight of the CNR shall be equal to or less than the weight of a legacy RT-1523F: 5.5 lbs empty or 8.7 lbs with a battery. This is inclusive of additional batteries if they are necessary for 24 hour operations for dismounted operations. | T | T | T | TC 2.3 Physical Weight Characteristics |
| 17 | 3.1.1.4 | Built-in-Tests | T | |||
| 18 | 3.1.1.4.1 | The CNR shall perform Power On Self-Test (POST) to determine operational status. | T | T | T | TC 2.5 CNR POST and BIT |
| 19 | 3.1.1.4.2 | For field and organizational level maintenance, the CNR shall provide Built In Test (BIT) functionality to troubleshoot down to Line Replaceable Unit (LRU) level. The BIT diagnostics shall be capable of fault detection of at least 95% of all faults and must be capable of fault isolation of at least 90% of detected faults. | T | T | T | TC 2.5 CNR POST and BIT |
| 20 | 3.1.1.5 | Connectors and Interfaces | T | |||
| 21 | 3.1.1.5.1 | The CNR-RT or its adaptor shall interface with the legacy VRC mounts, pin configuration, handsets, intercom interfaces, locking mechanism, amplifiers and the INC (Internet Controller) for mounted operation and digital fires. | T | N/A | T | TC 2.4 Connectors and Interfaces |
| 22 | 3.1.1.5.2 | Radio shall provide Type N Female RF interfaces for all dismounted antennas. | T | T | T | TC 2.4 Connectors and Interfaces |
| 23 | 3.1.1.5.3 | Shall allow the RT to be installed/uninstalled without any special tools and/or equipment. | T | T | T | TC 2.4 Connectors and Interfaces |
| 24 | 3.1.1.5.4 | Shall provide an audio connector and support U-283/U key fill or adapter. | T | T | T | TC 2.4 Connectors and Interfaces |
| 25 | 3.1.1.5.5 | Shall provide electrical interface for headsets, speaker/microphone, and handset in accordance with MIL-DTL-55116C. | T | T | T | TC 2.4 Connectors and Interfaces |
| 26 | 3.1.1.5.6 | Reserved | ||||
| 27 | 3.1.1.5.7 | Shall be able to connect an external military Precision GPS device for support of the SINCGARS RBSA mode. | T | T | T | Contractor Format Test Report |
| 28 | 3.1.1.5.8 | Shall provide a push-button or other mechanical interface to allow the radio operator and maintainer to access operational status, control functions and parameters, and zeroize the RT from the front panel. | T | T | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 29 | 3.1.1.5.9 | Shall provide built-in display/Human Machine Interface (HMI). When mounted, the radio will either present the front panel of the RT toward the user or have an HMI integrated into the mounting hardware that controls the RT and is presented towards the user as the mounted system’s front panel. | T | T | T | TC 2.5 CNR POST and BIT |
| 30 | 3.1.1.5.9.1 | Front Panel | T | |||
| 31 | 3.1.1.5.9.1.1 | Shall provide a front panel keypad interface similar in function to the existing RT-1523E/F radio. The front panel keypad shall be capable of selecting the following operational parameters: | T | T | T | TC 2.5 CNR POST and BIT |
TC 2.7 CNR Zeroize, Reload, and Retain Variables
| 32 | 3.1.1.5.9.1.2 | Preset channel (e.g., 8 Single Channel (SC), 6 Frequency Hopping (FH)) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 33 | 3.1.1.5.9.1.3 | RF Transmit Power (LO, MED, HI, PA) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 34 | 3.1.1.5.9.1.4 | Mode (SC, FH, Frequency Hopping 2 (FH2), Frequency Hopping 3 (FH3), RBSA) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 35 | 3.1.1.5.9.1.5 | COMSEC (Plaintext (PT), Ciphertext (CT), Ciphertext 2 (CT2)) | T | T | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 36 | 3.1.1.5.9.1.6 | Volume Control/Whisper Mode | T | T | T | TC 2.5 CNR POST and BIT |
| 37 | 3.1.1.5.9.1.7 | Display Backlight Control | T | T | T | TC 2.5 CNR POST and BIT |
| 38 | 3.1.1.5.9.1.8 | Data Rate and Selection (Standard Data Mode (SDM) Data Rate, Enhanced Data Mode (EDM) Data Rate) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 39 | 3.1.1.5.9.2 | The CNR-RT HMI shall provide operators and maintainers with the ability to check the following functions with precise visual feedback at any given time: | T | T | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 40 | 3.1.1.5.9.2.1 | For the CNR-RT’s functions: | T | |||
| 41 | 3.1.1.5.9.2.1.1 | Radio power (battery charge) status | T | T | T | TC 2.8 Displaying and Changing Modes |
| 42 | 3.1.1.5.9.2.1.2 | Most recent BIT Status | T | T | T | TC 2.5 CNR POST and BIT |
| 43 | 3.1.1.5.9.2.1.3 | Radio software version number | T | T | T | TC 2.8 Displaying and Changing Modes |
| 44 | 3.1.1.5.9.2.1.4 | Crypto status | T | T | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 45 | 3.1.1.5.9.2.1.5 | Frequency Hopping Mode (SC, FH, FH2, and FH3) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 46 | 3.1.1.5.9.2.2 | Plain text vs. Cypher text (legacy) or Crypto Modernized CT2 | T | T | T | TC 2.8 Displaying and Changing Modes |
| 47 | 3.1.1.5.9.2.3 | Transmitting power/signal strength | T | T | T | TC 2.8 Displaying and Changing Modes |
| 48 | 3.1.1.5.9.2.4 | Receive signal strength | T | T | T | TC 2.8 Displaying and Changing Modes |
| 49 | 3.1.1.5.9.2.5 | Alphanumeric Preset numbers with at least 5 digits | T | T | T | TC 2.8 Displaying and Changing Modes |
| 50 | 3.1.1.5.9.2.6 | Net ID (identification) | T | T | T | TC 2.8 Displaying and Changing Modes |
| 51 | 3.1.1.5.9.2.7 | Operating Frequency | T | T | T | TC 2.8 Displaying and Changing Modes |
| 52 | 3.1.1.5.9.2.8 | Volume level | T | T | T | TC 2.8 Displaying and Changing Modes |
| 53 | 3.1.1.5.9.2.9 | Shall display the results of the last BIT for review | T | T | T | TC 2.5 CNR POST and BIT |
| 54 | 3.1.1.5.9.3 | All presets must be accessible and the radio’s controls must be able to perform all tasks without need for an ancillary device or detachable HMI. | T | T | T | TC 2.8 Displaying and Changing Modes |
| 55 | 3.1.1.5.9.4 | The HMI shall be readable with 10,000 foot-candle, direct NITS sunlight. | T | A | N/A | Contractor Format Test Report |
| 56 | 3.1.1.5.9.5 | The HMI shall be readable with Generation III Night Vision Goggles. | T | A | N/A | Contractor Format Test Report |
| 57 | 3.1.1.5.9.6 | The CNR-RT shall allow control of the HMI display brightness from off to maximum. | T | T | T | TC 2.8 Displaying and Changing Modes |
| 58 | 3.1.1.5.9.7 | The CNR-RT shall provide the user the capability to input numerical and alpha numeric characters via a keypad device. | T | T | T | TC 2.8 Displaying and Changing Modes |
| 59 | 3.1.1.5.9.8 | The built-in display shall be readable when the RT is mounted. | T | T | T | TC 2.8 Displaying and Changing Modes |
| 60 | 3.1.1.5.9.9 | An Application Program Inerface (API) or Simple Network Management Protocol V3 (SNMP) interface to allow a remote HMI in the form of an application for Mission Command systems to be capable of selecting presets and controlling the radio's volume for mounted operations. | T | T | N/A | Contractor Format Test Report |
| 61 | 3.1.1.6 | Data Interfaces. Shall permit connection to a platform or local computer via a serial interface. | T | N/A | T | Test Cases 1.4.5 through 1.4.10 |
Follow-on tests with Fires 62 3.1.1.6.1 Shall provide a serial RS-232 interface for operation at rates of 1200, 2400, 4800, and 9600 bps to allow transmission of data using computers and commercial "Xmodem" software. T N/A T Test Cases 1.4.5 through 1.4.10 Follow-on tests with Fires 63 3.1.1.6.2 Shall provide front panel control via the RS-232 interface. T T T Test Cases 1.4.5 through 1.4.10 Follow-on tests with Fires 64 3.1.1.6.3 Shall provide a synchronous serial MIL-STD-188-114(A) interface for Packet Data. The Packet transfer rate shall be 16 kbps. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires 65 3.1.1.6.4 Shall support MIL-STD-188-220C with X.21 packet data interface. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires 66 3.1.1.6.5 Shall provide an analog data interface to support AD1 operation. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires 67 3.1.1.6.6 Shall provide an analog data interface to support TACFIRE AD2 operation. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires 68 3.1.1.6.7 Shall provide a serial connection to the INC device located in the Vehicle adapter. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires 69 3.1.1.6.8 Shall support serial interfaces with the RS-422 and RS-423 interfaces. T N/A T TC 1.5.6 Packet Mode – Shared Voice and Data Follow-on tests with Fires
| 70 | 3.1.1.6.9 | SNAP Interface. Shall provide an interface to the Steerable Null Antenna Processor (SNAP) for radio control of the Frequency Hopping Multiplexer (FHMUX) and accept BIT information from the INC and the FHMUX. Overview is found in TM 11-5820-890-10-8. | T | N/A | T | Contractor Format Test Report |
| 71 | 3.1.1.6.10 | The radio shall be able to support Fires Missions by following the legacy audio specifications for the SINCGARS RT-1523 radio and the following sub-systems that use the standards of the TACLINK card: | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 72 | 3.1.1.6.10.1 | ULTRALINK | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 73 | 3.1.1.6.10.2 | Forward Observer System (FOS) | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 74 | 3.1.1.6.10.3 | Mortars Fire Control System (MFCS) | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 75 | 3.1.1.6.10.4 | Advanced Field Artillery Tactical Data System (AFATDS) | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 76 | 3.1.1.6.10.5 | Pocket Sized Forward Entry Device (PFED Increment II) | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 77 | 3.1.1.6.10.6 | Precision Fires-Dismounted (PF-D) | T | N/A | T | TC 1.6 SINCGARS Fires Data with ULTRALink |
| 78 | 3.1.1.7 | Power | T | |||
| 79 | 3.1.1.7.1 | Shall provide capability to use battery power when dismounted with common primary and rechargeable batteries. | T | D | D | TC 2.1 Dismounted Functions |
| 80 | 3.1.1.7.2 | Shall allow the replacement of primary power source(s) without any special tools and/or equipment. | T | D | D | TC 2.1 Dismounted Functions |
| 81 | 3.1.1.7.3 | The CNR-RT shall be able to operate the legacy SINCGARS and SINCGARS CT2 waveforms using all modes specified in the Compliance Matrix in a dismounted network for voice or data operations at maximum transmit power in an operational environment with 6:3:1 (Listen, Receive, Transmit) for no less than 24 hours while meeting the size requirements specified in PRD paragraph 3.1.1.3.1. | T | N/A | T | TC 2.1 Dismounted Functions |
| 82 | 3.1.2 | Waveforms and Services | T | |||
| 83 | 3.1.2.1 | Shall store all provided waveforms and required operational parameters simultaneously. | T | T | T | TC 2.6 Cold Start and Warm Start |
| 84 | 3.1.2.2 | Shall store all data encrypted while at rest in accordance with current National Security Agency (NSA) guidelines for NSA-controlled data (e.g., keying material (KEYMAT)). | T | T | T | TC 2.6 Cold Start and Warm Start |
TC 2.7 CNR Zeroize, Reload, and Retain Variables 85 3.1.2.3 If using an NSA key for storage, it shall be a split key that is reloadable by soldiers in the field. Examples of this are JOSEKI or WATARI split keys. A full key that is not reloadable by soldiers in the field is not acceptable. T T T TC 2.6 Cold Start and Warm Start TC 2.7 CNR Zeroize, Reload, and Retain Variables
| 86 | 3.1.2.4 | Waveform and Mode Selection | T | |||
| 87 | 3.1.2.4.1 | Waveform modes shall be user selectable. For example: Change mode of SINCGARS. | T | T | T | TC 2.8 Displaying and Changing Modes |
| 88 | 3.1.2.4.2 | Shall be able to switch waveform modes in less than 60 seconds for supported waveforms. (e.g., SINCGARS voice to SINCGARS data mode). | T | T | T | TC 2.8 Displaying and Changing Modes |
| 89 | 3.1.2.5 | Cold Start/Warm Start | T | |||
| 90 | 3.1.2.5.1 | During cold start, the radio shall power on, instantiate waveform(s) and assign mode(s) or configuration parameters, and be fully operational within 7 minutes. Cold start is the process of configuring hardware (installing antennas, handmics, etc.), powering up, loading cryptographic KEYMAT and mission plan, entering necessary parameters, and configuring a radio’s software/applications to allow the radio to enter into its operational state and join a network. Cold start time includes Power On Self Test (POST). | T | T | T | TC 2.6 Cold Start and Warm Start |
| Cold start is normally required after such software items as waveforms, waveform operating parameters, crypto keys, and presets have been uninstalled from the radio and powered down. Cold start does not include the reloading of the radio operating environment (OE) or those radio services applications necessary to put the CNR-RT into a state in order to receive the software required to operationally configure the radio. | ||||||
| 91 | 3.1.2.5.2 | During warm start, the radio shall power on, instantiate waveform(s) and assign mode(s) or configuration parameters to be fully operational within 50 seconds. Warm start is conducted after a radio has been successfully loaded by the operator (completion of cold start) or has previously been in an operational state and contains all the necessary radio software/ applications and assembly of components to allow the set to enter into a state of operation. Warm start time excludes BIT times. | T | T | T | TC 2.6 Cold Start and Warm Start |
| Warm start process may consist of using a channel instantiated waveform and modifying its waveform parameter sets, (e.g., keys, presets, frequencies) to allow the operator to enter into a different network using the same waveform that is currently instantiated on the channel. Warm start may also consist of tearing down a radio’s channel and instantiating a new waveform and its parameter sets from memory unto the channel to allow the operator to enter into a new required network. | ||||||
| 92 | 3.1.3 | Global Positioning System (GPS) | T | |||
| 93 | 3.1.3.1 | External GPS Interface Requirements | T | |||
| 94 | 3.1.3.1.1 | Shall utilize Precise Position Service (PPS) GPS when both PPS and commercial GPS signals are available. | T | T | N/A | Contractor Format Test Report |
| 95 | 3.1.3.1.2 | Shall be able to receive time and position data via GPS-153 formatted message from external devices. For example: DAGR or M-Code module. | T | T | N/A | Contractor Format Test Report |
| 96 | 3.1.4 | Communications Security (COMSEC). For the purposes of this section, the term “keys” includes system keys, certificates, and Firefly vectors, as well as user traffic keys. | T | T | N/A | Contractor Format Test Report |
| 97 | 3.1.4.1 | Key Management | T | |||
| 98 | 3.1.4.1.1 | Shall be capable of using the existing Simple Key Loader (SKL) to load COMSEC and hopsets/presets for SINCGARS. | T | N/A | T | TC 2.6 Cold Start and Warm Start |
TC 2.7 CNR Zeroize, Reload, and Retain Variables
| 99 | 3.1.4.1.2 | Shall support Over The Air Management of cryptographic keying material using both Saville Automatic Remote Keying (SARK) Tx/Rx and the methods detailed in the SINCGARS CT2 specification, as appropriate to the waveform in use during the re-key event. | T | N/A | T | TC 1.5.4 SINCAGRS SARK Mode |
| 100 | 3.1.4.1.3 | Shall support manual zeroization of keys individually or collectively. | T | N/A | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 101 | 3.1.4.2 | Key Retention | T | |||
| 102 | 3.1.4.2.1 | Shall be capable of retaining mission variables for at least 144 hours after loss of primary power. | T | N/A | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 103 | 3.1.4.2.2 | The Hold Up Battery (HUB) solution shall provide the capability to retain core WATARI or JOSEKI variables with a 12 month or greater operational life. | T | N/A | T | Contractor Format Test Report |
| 104 | 3.1.4.2.3 | The HUB shall be field replaceable. | T | N/A | T | TC 2.7 CNR Zeroize, Reload, and Retain Variables |
| 105 | 3.1.5 | The CNR shall comply with the LRU Product Specification for RT-1523F (A3307000-1, dated 2012) and meet the requirements of the Interface Standard Environmental Conditions for Ground Combat Systems document, ATPD-2404, in effect at the time of that publication. Rationale: The CNR is a communications component in the Ground Combat System and should not reduce the effectiveness or operational capabilities of the platform. | T | T | N/A | Contractor Format Test Report |
| 106 | 3.1.5.1 | Shall not degrade environmental compliance of extant AM-7239E Vehicle Amplifier Adapter (VAA) and mount that the CNR-RT fits within. | T | T | N/A | |
| 107 | 3.1.5.2 | Reserved | T | |||
| 108 | 3.1.5.3 | Temperature | T | |||
| 109 | 3.1.5.3.1 | Shall operate in temperatures ranging from -32° C to +71° C verified by testing in accordance with MIL-STD-810H for compliance with ATPD-2404. Rationale: The CNR is a component in weapons systems that are expected to remain fully operational under extreme temperature requirements. The CNR is not allowed to degrade performance due to heat (reduce power output) or to be dependent on other aspects of the platform, such as environmental control, in order to remain operable. | T | T | Gov may verify | Contractor Format Test Report |
| 110 | 3.1.5.3.2 | Shall withstand storage temperatures from -51° C to +71° C verified by testing in accordance with MIL-STD-810H, Methods 501.5, Procedure I – High Temperature Storage, and 502.5, Procedure I – Low Temperature Storage, for compliance with ATPD-2404. Rationale: Wartime stocks and operational unit equipment can endure extreme temperatures. | T | T | Gov may verify | Contractor Format Test Report |
| 111 | 3.1.5.4 | Environmental Requirements. Shall meet environmental requirements as stated in the LRU Product Specification for RT-1523F (A3307000-1, dated 2012) at a minimum. These include, but are not limited to: shock, vibration, explosive atmosphere, over-pressure, fungus, salt fog, rain, and immersion. Conformance shall be to the Military Specifications that were in effect at that time. | T | T | Gov may verify | Contractor Format Test Report |
| 112 | 3.1.5.5 | Nuclear Biological Chemical | T | |||
| 113 | 3.1.5.5.1 | Nuclear Survivability. Shall meet requirements defined in the document: United States Army Nuclear and Combating WMD Agency (USANCA) Memorandum for Project Manager ABCT; Subject: Chemical, Biological, Radiological, Nuclear (CBRN) Survivability Criteria for the Abrams; 25 July 2011 (SECRET). | T | T | N/A | Contractor Format Test Report |
| 114 | 3.1.5.5.2 | Analysis which documents that personnel in full Mission Oriented Protective Posture (MOPP) IV protective gear can successfully operate and maintain the radio. | T | T | N/A | Contractor Format Test Report |
| 115 | 3.1.5.5.3 | Analysis which documents that the radio can be operated for 72 hours while contaminated. | T | T | N/A | Contractor Format Test Report |
| 116 | 3.1.5.5.4 | Analysis which documents that the radio can be decontaminated using existing solvents. | T | T | N/A | Contractor Format Test Report |
| 117 | 3.1.6 | Other Requirements and Capabilities | T | |||
| 118 | 3.1.6.1 | Audible Status: The radio shall provide audible status, alerts, and cues. | T | T | T | TC 1.4.1 SINCGARS SCPT - Voice |
| 119 | 3.1.6.2 | The CNR shall be capable of implementing CM2 changes from the NSA, inclusive of new certificates required for validating NSA-signed software. Rationale: Although upgrades, processor space, or memory space are not linear relationships, the intent is to allow overhead for future growth. Growth includes proposed and not-yet-defined elements of CM2. | T | T | N/A | Contractor Format Test Report |
| 120 | 3.2 | Dismounted SINCGARS2 Radio Set Capabilities. The CNR shall demonstrate: |
* The capabilities required by PRD paragraph 3.1, including all sub-paragraphs, when the SINCGARS2 Radio is combined with the legacy handsets and antenna(s) required for dismounted operations.
* Operational Availability (Ao) of 96% (Threshold) and 99% (Objective).
* Material Availability (Am) of 75% (Threshold) and 96% (Objective) for a population of 100,000 radios.
* Mean Time Between Essential Function Failure (MTBEFF) no less than 477 hours (Threshold) and 683 hours (Objective).
| * 86% (Threshold) and 90% (Objective) probability of operating over a 72 hour period without an essential function failure. | T | T | N/A | Contractor Format Test Report | |
| 121 | 3.3 | The Mounted CNR Set shall demonstrate: |
* The capabilities required by PRD paragraph 3.1, including all sub-paragraphs, when the SINCGARS2 Radio is combined with the legacy hardware required for mounted operations.
* Operational Availability (Ao) of 94% (Threshold) and 97% (Objective).
* Mean Time Between Essential Function Failure (MTBEFF) of no less than 386 hours (Threshold) and 517 hours (Objective) per channel.
* 83% (Threshold) and 87% (Objective) probability of operating over a 72 hour period without an essential function failure.
| * Configuration power consumption draw of no more than 15 Amps when used with extant VRC mount and amplifiers. Rationale: The circuit on most platforms with circuit breakers are wired for 15 amps. A solution that does not require modifications to the platforms, including the breakers, wires, or contacts, is required. | T | T | N/A | Contractor Format Test Report | ||||
| 122 | 3.3.1 | Mounted CNR Functions (M-CNR) | T | |||||
| 123 | 3.3.1.1 | Shall allow the CNR-RT to be installed/uninstalled without any special tools and/or equipment. | T | T | T | TC 2.4 Connectors and Interfaces | ||
| 124 | 3.3.1.2 | Power Management | T | |||||
| 125 | 3.3.1.3 | Shall accept prime power to the RT from the legacy mount and run off the vehicular power. | T | T | T | TC 2.4 Connectors and Interfaces | ||
| 126 | 3.4 | The CNR-RT shall operate the SINCGARS waveform, meeting capabilities for legacy and modernized SINCGARS. | T | See Individual Test Cases Listed Below | ||||
| 127 | 3.4.1 | The CNR-RT shall operate the following SINCGARS Voice Modes | T | N/A | T | |||
| 128 | 3.4.1.1 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT SC mode. | T | N/A | T | TC 1.4.13 SINCGARS SCPT – Voice | ||
| 129 | 3.4.1.2 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT FH mode. | T | N/A | T | TC 1.4.3 SINCGARS FHPT – Voice | ||
| 130 | 3.4.1.3 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT Frequency Hopping Master (FHM) mode. | T | N/A | T | TC 1.4.12 FHM/LNE | ||
| 131 | 3.4.1.4 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT FH2 mode. | T | N/A | T | TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) |
TC 1.4.10 SINCGARS FH2 Hopping Master (Data) 132 3.4.1.5 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT Frequency Hopping 2 Master (FH2M) mode. T N/A T TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) TC 1.4.10 SINCGARS FH2 Hopping Master (Data) 133 3.4.1.6 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT FH3 mode. T N/A T TC 1.4.10 SINCGARS FH3 Hopping Master (Voice) TC 1.4.10 SINCGARS FH3 Hopping Master (Data) Future Test 134 3.4.1.7 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in PT Frequency Hopping 3 Master (FH3M) mode. T N/A T TC 1.4.10 SINCGARS FH3 Hopping Master (Voice) TC 1.4.10 SINCGARS FH3 Hopping Master (Data) Future Test
| 135 | 3.4.1.8 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in CT SC mode. | T | N/A | T | TC 1.4.2 SINCGARs SCCT – Voice |
| 136 | 3.4.1.9 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in CT FH mode. | T | N/A | T | TC 1.4.4 SINCGARS FHCT – Voice |
| 137 | 3.4.1.10 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in CT FH2 mode. | T | N/A | T | TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) |
TC 1.4.10 SINCGARS FH2 Hopping Master (Data) 138 3.4.1.11 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 voice in CT FH2M mode. T N/A T TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) TC 1.4.10 SINCGARS FH2 Hopping Master (Data)
| 139 | 3.4.1.12 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with a legacy RT-1523 using a VACM (VINSON/ANDVT CRYPTOGRAPHIC MODERNIZATION) for voice in CT2 SC mode. | T | N/A | T | TC 1.4.14 SINCGARs CT2 – Voice |
| 140 | 3.4.1.13 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with a legacy RT-1523 using a VACM for voice in CT2 FH2 mode. | T | N/A | T | TC 1.4.14 SINCGARs CT2 – Voice |
| 141 | 3.4.1.14 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with a legacy RT-1523 using a VACM for voice in CT2 FH2M mode. | T | N/A | T | TC 1.4.14 SINCGARs CT2 – Voice |
TC 1.4.10 SINCGARS FH3 Hopping Master (Voice) TC 1.4.10 SINCGARS FH3 Hopping Master (Data) 142 3.4.1.15 The CNR-RT shall operate the SINCGARS waveform and be interoperable with a legacy RT-1523 using a VACM for voice in CT2 FH3 mode. T N/A T TC 1.4.10 SINCGARS FH3 Hopping Master (Voice) TC 1.4.10 SINCGARS FH3 Hopping Master (Data) Future Test: When FH3 becomes available the test will resemble CT2/FH2
| 143 | 3.4.1.16 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with a legacy RT-1523 using a VACM for voice in CT2 FH3M mode. | T | N/A | T | Future Test: When FH3 becomes available the test will resemble CT2/FH3 |
| 144 | 3.4.2 | The CNR-RT shall operate the following SINCGARS Data Modes | T | |||
| 145 | 3.4.2.1 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 1200 bps SDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode 146 3.4.2.2 The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 1200 bps SDM in CT2/SC and CT2/FH2 modes. T N/A T TC 1.4.5 SINCGARs SCPT – Data TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode 147 3.4.2.3 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 2400 bps SDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. T N/A T TC 1.4.5 SINCGARs SCPT – Data TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode 148 3.4.2.4 The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 2400 bps SDM in CT2/SC and CT2/FH2 modes. T N/A T TC 1.4.5 SINCGARs SCPT – Data TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode 149 3.4.2.5 The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 4800 bps SDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. T N/A T TC 1.4.5 SINCGARs SCPT – Data TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode 150 3.4.2.6 The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 4800 bps SDM in CT2/SC, and CT2/FH2 modes. T N/A T TC 1.4.5 SINCGARs SCPT – Data TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 151 | 3.4.2.7 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 16 kbps transparent data mode in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.9 16 kbps Transparent Data Mode (TDM) |
| 152 | 3.4.2.8 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 16 kbps transparent data mode in CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | TC 1.4.9 16 kbps Transparent Data Mode (TDM) |
| 153 | 3.4.2.9 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 1200 bps EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 154 | 3.4.2.10 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 1200 bps EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 155 | 3.4.2.11 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 2400 bps EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 156 | 3.4.2.12 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 2400 bps EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 157 | 3.4.2.13 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 4800 bps EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 158 | 3.4.2.14 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 4800 bps EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 159 | 3.4.2.15 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 9600 bps EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 160 | 3.4.2.16 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 9600 bps EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 161 | 3.4.2.17 | The CNR-RT shall operate Packet Mode (PT/CT) supporting Patriot. | T | N/A | T | TC 1.5.6 Packet Mode – Shared Voice and Data |
| 162 | 3.4.2.18 | The CNR-RT shall operate Packet Mode (CT2) supporting Patriot. | T | N/A | T | TC 1.5.6 Packet Mode – Shared Voice and Data |
| 163 | 3.4.2.19 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 1200 bps RS-232 EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 164 | 3.4.2.20 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 1200 bps RS-232 EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 165 | 3.4.2.21 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 2400 bps RS-232 EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 166 | 3.4.2.22 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 2400 bps RS-232 EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 167 | 3.4.2.23 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 4800 bps RS-232 EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 168 | 3.4.2.24 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 4800 bps RS-232 EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 169 | 3.4.2.25 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with legacy RT-1523 using 9600 bps RS-232 EDM in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.4.5 SINCGARs SCPT – Data |
TC 1.4.6 SINCGARs SCCT – Data TC 1.4.7 SINCGARs FHPT – Data TC 1.4.8 SINCGARs FHCT – Data TC 1.4.10 SINCGARS FH2/3 Hopping Mode
| 170 | 3.4.2.26 | The CNR-RT shall operate the SINCGARS waveform and be interoperable with Modernized SINCGARS using 9600 bps RS-232 EDM in PT/FH3, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | Future Test |
| 171 | 3.4.3 | The CNR-RT shall demonstrate the following SINCGARS capabilities | T | |||
| 172 | 3.4.3.1 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform Electronic Remote Fill (ERF) transmit and receive in PT/FH, PT/FH2, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.5.2 SINCGARS ERF Mode |
| 173 | 3.4.3.2 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform ERF transmit and receive in PT/FH3, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | TC 1.5.2 SINCGARS ERF Mode |
Future Tests for FH3
| 174 | 3.4.3.3 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform Saville Automatic Remote Keying (SARK) transmit and receive in CT/SC, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.5.4 SINCAGRS SARK Mode |
| 175 | 3.4.3.4 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform 5 kHz/10 kHz channel offset in PT/SC, CT/SC, and CT2/SC modes. | T | N/A | T | TC 1.5.7 SINCGARS 5kHz / 10kHz Channel Offset |
| 176 | 3.4.3.5 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform Scan Mode in PT/SC, CT/SC, and CT2/SC modes. | T | N/A | T | TC 1.5.5 SINCGARS SCAN Mode |
| 177 | 3.4.3.6 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform F1/F2 Retransmit in PT/SC, PT/FH, PT/FH2, CT/SC, CT/FH, CT/FH2, CT2/SC, CT2/FH2, and CT2/FH3 modes. | T | N/A | T | TC 1.4.11 SINCGARS F1/F2 Retransmit |
| 178 | 3.4.3.7 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform F1/F1 Retransmit in PT/FH, PT/FH2, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.5.1 SINCGARS F1/F1 Retransmit |
| 179 | 3.4.3.8 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform F1/F1 Retransmit in CT2/FH2 and CT2/FH3 modes. | T | N/A | T | TC 1.5.1 SINCGARS F1/F1 Retransmit |
Future (FH3) Tests
| 180 | 3.4.3.9 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform Cue Mode transmit and receive in PT/FH, PT/FH2, CT/FH, and CT/FH2 modes. | T | N/A | T | TC 1.5.3 SINCGARS CUE Mode |
| 181 | 3.4.3.10 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform Cue Mode transmit and receive in CT2/FH2 and CT2/FH3 modes. | T | N/A | T | Future Test |
| 182 | 3.4.3.11 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform functions as Frequency Hop Master control station in FH mode. | T | N/A | T | TC 1.4.3 SINCGARS FHPT – Voice |
TC 1.4.12 FHM/LNE
183 3.4.3.12 The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform functions as Frequency Hop Master control station in FH2 mode. T N/A T TC 1.4.10 SINCGARS FH2/3 Hopping Mode TC 1.4.10 SINCGARS FH2 Hopping Master (Voice) TC 1.4.10 SINCGARS FH2 Hopping Master (Data)
TC 1.4.12 FHM/LNE
184 3.4.3.13 The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform functions as Frequency Hop Master control station in FH3 mode. T N/A T TC 1.4.12 FHM/LNE Future Test
| 185 | 3.4.3.14 | The CNR-RT shall operate the SINCGARS waveform and demonstrate the ability to perform functions as Late Net Entry. | T | N/A | T | TC 1.4.12 FHM/LNE |
| 186 | 3.5 | Capabilities and Configurations | T | |||
| 187 | 3.5.1 | Route and Retransmission. Shall provide Route and Retransmission Capabilities equivalent to the legacy SINCGARS radio being upgraded, including F1/F1 and F1/F2. | T | N/A | T | TC 1.4.11 SINCGARS F1/F2 Retransmit |
TC 1.5.1 SINCGARS F1/F1 Retransmit
| 188 | 3.5.2 | CNR Remote HMI. Shall provide a CNR remote physical HMI that is capable of selecting presets, controlling the dismounted radio’s volume, and displaying the same information as required in PRD paragraph 3.1.1.5.9 and all sub-paragraphs. | T | T | N/A | Contractor Format Test Report |
| 189 | 3.5.3 | Mounted CNR HMI. Shall provide a Mounted CNR HMI that will mount securely in the vehicle interior and is capable of selecting presets, controlling the radio’s volume, and displaying the same information as required in PRD paragraph 3.1.1.5.9 and all sub-paragraphs. | T | T | N/A | Contractor Format Test Report |
| 190 | 3.5.4 | Reserved | ||||
| 191 | 3.6 | Foreign Military Sales (FMS) Variant (Five-Eyes). Shall provide a CNR-RT variant suitable for FMS sales to Five-Eye partner nations suitable for direct integration into systems equivalent to the fielded legacy VRC-88 though VRC-92 systems. | Td | T | N/A | Contractor Format Test Report |
| 192 | 3.7 | Foreign Military Sales (FMS) Variant (Non-Five-Eyes). Shall provide a CNR-RT variant suitable for FMS sales to non-Five-Eye partner nations suitable for direct integration into systems equivalent to the fielded legacy VRC-88 though VRC-92 systems. | Td | T | N/A | Contractor Format Test Report |
CUI
(When Filled In)
CUI
(When Filled In)
File details come from the government source that posted it. Updated .