Attach 5_WD_WY20230040_25Aug23.pdf

10/10/23, 9:22 AM SAM.gov https://sam.gov/wage-determination/WY20230040/0 1/4

"General Decision Number: WY20230040 08/25/2023

State: Wyoming

Construction Type: Highway

County: Laramie County in Wyoming.

HIGHWAY CONSTRUCTION PROJECTS

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

|If the contract is entered |� Executive Order 14026 | |into on or after January 30, | generally applies to the | |2022, or the contract is | contract. | |renewed or extended (e.g., an |� The contractor must pay | |option is exercised) on or | all covered workers at | |after January 30, 2022: | least $16.20 per hour (or | | | the applicable wage rate | | | listed on this wage | | | determination, if it is | | | higher) for all hours | | | spent performing on the | | | contract in 2023. | |If the contract was awarded on|� Executive Order 13658 | |or between January 1, 2015 and| generally applies to the | |January 29, 2022, and the | contract. | |contract is not renewed or |� The contractor must pay all| |extended on or after January | covered workers at least | |30, 2022: | $12.15 per hour (or the | | | applicable wage rate listed| | | on this wage determination,| | | if it is higher) for all | | | hours performing on that | | | contract in 2023. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date 0 08/25/2023

SUWY2023-003 06/09/2022

Rates Fringes

CARPENTER........................$ 32.20 13.00

CONCRETE FINISHER................$ 23.80 9.61

ELECTRICIAN

Electrician.................$ 32.73 15.80 Equipment Operator (Electrical Work Only)......$ 49.55 16.51 Groundperson................$ 35.18 15.24

IRONWORKER.......................$ 55.47 0.00

LABORER

GROUP 1.....................$ 19.28 5.60

GROUP 2.....................$ 21.56 5.60

GROUP 3.....................$ 26.50 5.60

LABORER CLASSIFCATIONS

GROUP 1: Erector & Installer (fences, guardrail & barrier);

Flag persons (traffic control); Form Strippers; General Laborers; Heater Tender; Material Checker; Pick-up Truck Driver; Pilot Car Driver; Pre-watering, Presetting & Pre-irrigation (all work); Riprap Man; Tar & Asphalt Pot Tender.

GROUP 2: Asphalt Raker and Tamper; Bin Wall Installer; Chain Saw Operator (clearing & grubbing); Concrete Saw (all types);

Dump Man; Form Setter (paving); Hand Operated Vibratory Roller; High Scaler; Jackhammer & Pavement Breaker;

Landscaper, Landscape Laborer; Maintainer (traffic control);

1083825517C Highlight https://sam.gov/wage-determination/WY20230040/0 2/4

Mortar Man on Stone Riprap; Nozzle Man (air, water, gunite & sandblasting); Painter (brush & spray); Pipe Setter (all pipe types); Tamper Operator (pneumatic, electric, gas & similar) GROUP 3: Drill Doctor, Form Setter and Mover, Spader, Spilling and/or Caisson Worker; Miner (driller), Machine Man, Timber Man; Powderman, Blaster, Tender; Wagon Drill, Air-Trac.

(diamond and other drills for blasting powder or grouting).

POWER EQUIPMENT OPERATOR

GROUP 1.....................$ 23.92 9.61

GROUP 2.....................$ 24.70 9.61

GROUP 3.....................$ 27.83 9.61

POWER EQUIPMENT OPERATOR CLASSIFCATIONS

ALL ELECTRICAL WORK IS EXCLUDED. FOR ELECTRICAL WORK, USE

EQUIPMENT OPERATOR CLASSIFICATION LISTED UNDER ELECTRICAL

CONSTRUCTION

GROUP 1: Air Compressor (all types); Backhoes & Excavators (to 5CY.); Batch Bin Weighman, Sissorman or Hopper; Broom Operator (all types); Chip Spreader Operator; Conveyor Belt Operator;

Crusher Oiler; Form Grader Operator; Joint Machine Operator;

Longitudinal Float Operator; Oiler, Utility; Power Loader (belt & bucket type); Pump Operator; Roller Operator, self-propelled (Dirt); Skid Steer (all attachments); Tire Repairman (large construction equip. tires); Tractor Operator (farm with or w/o power attachments); Tugger (all types).

GROUP 2: Articulated Rock Truck (all capacity); Asphalt Plant Operator; Backhoe, Excavator & Shovel (6 CY. & larger); Batch Plant Operator; Bituminous Laydown Machine Operator; Concrete Batch Plant Operator; Concrete Finish Machine Operator;

Concrete Spreader & Paver Operator; Concrete Multi Blade Span Saw (Hunt process); Crusher Operator; Dozer Operator (all sizes & power attachments); Draglines, Cranes, Piledriver & Truck Mounted Cranes (Mfg. Rating: less than 3.5 CY., and /or less than 50 Tons, all attachments); Drilling Machine, Integrated (all types); Front End Loaders (1.5 to and including 10 CY.); Hydro-type Crane (to 50 tons); Mixer Operator, Concrete (over 1yd.); Motor Patrol Operator (all excluding finish); Mulching Machine Operator; Oiler (crane & shovels); Pavement Breaker, Hydro-Tamper & similar; Roller Operators, Asphalt (steel & pneumatic); Roto-Milling Machine (under 8 ft. wide); Scraper Equipment (all types and sizes);

Screed Operator; Trenching Machine Operator.

GROUP 3: Draglines, Cranes, Piledrivers & Truck Mounted Cranes (Mfg. Rating: 3.5 CY. or larger and/or 50 tons & larger, all attachments); Front End Loaders (over 10 CY.); Heavy Duty Mechanic, Machine Doctor; Hoist Operator (two or more drums, shafts, or raises); Mixer Operator (dual drum); Motor Patrol Operator (finish); Roto-Milling Machine (8 ft. & larger).

TRUCK DRIVER

GROUP 1.....................$ 19.67 9.61

GROUP 2.....................$ 24.40 9.61

GROUP 1: ?A? Frame Truck Driver; Coring Machine (self propelled); Dump Truck Driver (to and including 13 CY.); Flat Rack Material Truck Driver (to 5 tons); Fuel Service Truck Driver; Gang Truck Driver; Gravel Spreader;

Greaseman, Tireman, Serviceman; Oil Distributor Driver (to & including 3,600 gal.); Snow Plow Driver (the CY. rate of the truck); Transit Mix or Wet Mix Truck Driver;

Utility Winch Truck Driver; Water Truck Driver (to & including 3,600 gal.).

GROUP 2: Dump Truck Driver (14 to 45 CY.); Flat Rack Material Truck Driver (over 5 tons); Low Boy & Tandem Axle Float Driver; Multiple Axle Type Truck (semi); Oil Distributor Driver (over 3,600 gal); Truck Mechanics; Water Truck Driver (over 3,600 gal.); Winch Trailer Truck Driver.

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO https://sam.gov/wage-determination/WY20230040/0 3/4 is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses (29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate (weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or ""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010 08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling https://sam.gov/wage-determination/WY20230040/0 4/4

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour National Office because National Office has responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations Wage and Hour Division U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator (See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board U.S. Department of Labor 200 Constitution Avenue, N.W.

Washington, DC 20210

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISIO"