Atch 37 Wage Determination Number NV24.pdf

PDF 270 KB Posted

Attached to
IDIQ Paving Federal contract opportunity
Solicitation number
FA486122R0011
Issued by
Department of the Air Force

View the file

Other files for this federal contract opportunity

Other files attached to IDIQ Paving, newest first.
File Type Posted
Atch 44- Sample Client Authorization Letter.pdf PDF
Atch 42 Past Performance Information Sheet.pdf PDF
Atch 39 Nellis Single Pass 1 Year Request Template.docx DOCX document
Atch 38 99 SFS - Mass Pass Request Template.xlsx XLSX spreadsheet
Atch 36 Wage Determination Number Number NV1.pdf PDF
Atch 30 Progress Schedule.xlsx XLSX spreadsheet
Atch 34 AF Form 103 Base Civil Engineering Work Clearance Request.pdf PDF
Atch 33 Temporary Fencing Guidelines for Desert Tortoise Projects (2022).pdf PDF
Atch 26 APPENDIX 20 Environmental Permit Guidance Mar 2022.pdf PDF
Atch 22 APPENDIX 17 AF Form 103 Work Clearance Request.pdf PDF
Atch 21 APPENDIX 17 AF Form 103 Work Clearance Request Guidance.docx DOCX document
Atch 16 APPENDIX 12 Crack Rpr Detail.pdf PDF
Atch 15 APPENDIX 11 Rpr of Concrete (Fail Keyway).pdf PDF
Atch 11 APPENDIX 7 Valley Gutter Detail.pdf PDF
Atch 32 Plan 32-7086 Hazardous Material Management Plan.pdf PDF
Atch 24 APPENDIX 18 Nuclear Gauge Request Form 2.pdf PDF
Atch 17 APPENDIX 13 Field Molded Joint Seal Details.pdf PDF
Atch 14 APPENDIX 10 Full Depth Rpr Details.pdf PDF
Atch 10 APPENDIX 6 Sidewalk Detail.pdf PDF
Atch 05 APPENDIX 1 Utility Ducts Detail.pdf PDF
Atch 01 Paving SOW.pdf PDF
Atch 40 (DBIDS) Installation Pass Request_Creech Template.pdf PDF
Atch 43 Past Performance Questionnaire.pdf PDF
Atch 41 Subcontractor or Teaming Partner Consent Form.pdf PDF
Atch 35 Request for Authorization for Radioactive Materials.pdf PDF
Atch 28 APPENDIX 22 DOD Supplement to National Manual Uniform Traffic Control Devices.pdf PDF
Atch 20 Appendix 16 Nellis_Creech_IFS_Final.pdf PDF
Atch 18 APPENDIX 14 Compression Seal Detail.pdf PDF
Atch 13 APPENDIX 9 Partial Depth Rpr Details.pdf PDF
Atch 12 APPENDIX 8 Sleeve Bollards Detail.pdf PDF
Atch 07 APPENDIX 3 Typical Wing Wall Inlet Detail.pdf PDF
Atch 02 Paving IDIQ Bid Schedule.xlsx XLSX spreadsheet
Solicitation - FA486122R0011.pdf PDF
Atch 31 Progress Report Template_AF3065.pdf PDF
Atch 29 NTTR Visit Request.pdf PDF
Atch 27 APPENDIX 21 National_Manual_Uniform Traffic Control Devices.pdf PDF
Atch 25 APPENDIX 19 T10_1-Bollards Fixed- Type 2.pdf PDF
Atch 23 APPENDIX 18 Nuclear Gauge Form 1.xlsx XLSX spreadsheet
Atch 19 APPENDIX 15 ADA Warning Panel Detail.pdf PDF
Atch 09 APPENDIX 5 L Curb and Gutter Detail.pdf PDF
Atch 08 APPENDIX 4 A Curb Detail.pdf PDF
Atch 06 APPENDIX 2 Mooring Detail.pdf PDF
Atch 00-Paving IDIQ List of Attachments.pdf PDF
Show all 43

On GovTribe

Work with this file on GovTribe

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

"General Decision Number: NV20220024 02/25/2022

Superseded General Decision Number: NV20210024

State: Nevada

Construction Type: Heavy

HEAVY CONSTRUCTION PROJECTS (including sewer/water construction).

County: Clark County in Nevada.

EXCLUDES NEVADA TEST SITE (NTS), TONOPAH TEST RANGE (TTR) AND

NATIONAL TEST AND TRAINING RANGE (NTTR)

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon Related Acts, including those set forth at 29 CFR 5.1(a)(2)-(60).

|If the contract is entered |. Executive Order 14026 |

|into on or after January 30, | generally applies to the |

|2022, or the contract is | contract. |

|renewed or extended (e.g., an |. The contractor must pay |

|option is exercised) on or | all covered workers at |

|after January 30, 2022: | least $15.00 per hour (or |

| | the applicable wage rate |

| | listed on this wage |

| | determination, if it is |

| | higher) for all hours |

| | spent performing on the |

| | contract in 2022. |

|If the contract was awarded on|. Executive Order 13658 |

|or between January 1, 2015 and| generally applies to the |

|January 29, 2022, and the | contract. |

|contract is not renewed or |. The contractor must pay all|

|extended on or after January | covered workers at least |

|30, 2022: | $11.25 per hour (or the |

| | applicable wage rate listed|

| | on this wage determination,|

| | if it is higher) for all |

| | hours spent performing on |

| | that contract in 2022. |

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the

Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at https://www.dol.gov/agencies/whd/government-contracts.

Modification Number Publication Date

0 01/07/2022

1 02/18/2022

2 02/25/2022

ELEC0357-010 09/01/2021

Rates Fringes

ELECTRICIAN (Including Low

Voltage Wiring)..................$ 50.58 21.70

Excluding Low Voltage.......$ 47.38 19.35

Low Voltage Wiring Only.....$ 47.38 19.35

ELEC0396-001 06/01/2016

LINE CONSTRUCTION

Groundman...................$ 22.71 13.31

Heavy Equipment Operator....$ 34.97 14.88

Lineman.....................$ 45.27 15.68

ENGI0012-014 10/01/2020

POWER EQUIPMENT OPERATOR

(Crane)

GROUP 12....................$ 52.94 26.65

GROUP 16....................$ 54.36 26.65

GROUP 17....................$ 54.86 26.65

GROUP 19....................$ 56.89 26.65

GROUP 20....................$ 57.50 26.65

GROUP 21....................$ 58.11 26.65

GROUP 22....................$ 58.87 26.65

GROUP 23....................$ 59.33 26.65

GROUP 12: Crane Operator (up to including 40 ton capacity)

GROUP 16: Crane Operator (over 40 tons up to and including

79 tons)

GROUP 17: Crane Operator (Including 80 tons up to and including 150 tons)

GROUP 19: Crane Operator (over 150 tons up to and including

200 tons)

GROUP 20: Crane Operator (over 200 tons up to and including

250 tons)

GROUP 21: Crane Operator (over 250 tons up to and including

300 tons)

GROUP 22: Crane Operator (over 300 tons up to and including

350 tons)

GROUP 23: Crane Operator (over 350 tons)

ENGI0012-019 10/01/2020

(Backhoe/Excavator/Trackhoe)

Group 4...................$ 50.52 26.65

Group 8...................$ 50.85 26.65

Group 10...................$ 50.97 26.65

Group 12...................$ 51.14 26.65

Group 16...................$ 51.47 26.65

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

Group 4: Backhoe Operator (Mini-Max or similar type);

Excavator Track/Rubber-Tired (Operating weight under 21,000 lbs.)

Group 8: Backhoe Operator (up to an including 3/4 yd); (over

3/4 yd); Excavator Track/Rubber-Tired - (Operating Weight

21, 000 lbs. - 100, 000 lbs.)

Group 10: Backhoe Operator (over 5 cu. yds)

Group 12: Backhoe Operator (over 7 cu. yds); Excavator

Track/Rubber-Tired - (Operating Weight 21, 000 lbs. - 100, 000 lbs.)

Group 16: Excavator Track/Rubber-Tired - (Operating Weight exceeding 200,000 lbs.)

ENGI0012-020 10/01/2020

GROUP 01....................$ 47.79 26.65

GROUP 04....................$ 50.52 26.65

GROUP 06....................$ 50.74 26.65

GROUP 08....................$ 50.85 26.65

GROUP 10....................$ 50.97 26.65

GROUP 12....................$ 51.14 26.65

POWER EQUIPMENT OPERATOR CLASSIFICATIONS

GROUP 1: Oiler

GROUP 4: Greaser (Tractor/Truck); Screed Operator (Asphalt or

Concrete); Rock Wheel Saw/Trencher

GROUP 6: Heavy Duty Repairman/Mechanic

GROUP 8: Loader Operator (Athey, Euclid, Sierra and similar types); Compactor (self-propelled); Drilling Machine

Operator, Bucket or Auger Types (Calweld 150 Bucket or similar types - Watson 1500, 2000, 2500 Auger or similar types - Texoma 700, 800 Auger or similar types - drilling depth of 60' maximum); Grade Checker; Tractor Operator (any type larger than D-5 - 100 flywheel h.p. and over, or similar - Bulldozer, Tamper, Scraper and Push

Tractor, single engine); Rubber-Tired Scraper Operator

(self-loading paddle wheel type -

John Deere, 1040 and similar single unit).

GROUP 10: Grader/Blade (Motor Patrol - Blade Operator)

(single engine).

GROUP 12: Vermeer Rock Trencher (or similar type).

IRON0416-002 10/01/2021

IRONWORKER, REINFORCING..........$ 43.30 34.30

IRON0433-002 10/01/2021

IRONWORKER, STRUCTURAL...........$ 43.30 34.30

LABO0169-015 10/01/2021

LABORER

(1) Cones/ Barricades/

Barrels-

Setter/Mover/Sweeper........$ 28.55 14.77

(1A) Flagger................$ 25.68 14.77

(3) Asphalt Shoveler, Spreader and Distributor....$ 28.80 14.77

(4) Asphalt Raker;

Pipelayer...................$ 29.05 14.77

LABO0872-003 07/01/2021

LABORER

(1) Common or General.......$ 31.00 29.89

(3) Mason Tender-

Cement/Concrete; Concrete

Saw.........................$ 31.31 29.89

PLAS0797-007 10/01/2021

CEMENT MASON/CONCRETE FINISHER...$ 34.50 12.45

PLUM0525-003 10/01/2021

PLUMBER/PIPEFITTER...............$ 50.25 24.05

SUNV2014-024 09/08/2016

BRICKLAYER.......................$ 27.36 0.00

CARPENTER, Includes Form Work....$ 31.78 16.03

OPERATOR: Bobcat/Skid

Steer/Skid Loader................$ 29.93 0.00

OPERATOR: Broom/Sweeper.........$ 36.66 12.22

OPERATOR: Paver (Asphalt, Aggregate, and Concrete).........$ 28.99 0.00

OPERATOR: Roller................$ 27.35 0.00

TRUCK DRIVER: Dump Truck........$ 22.43 0.00

WELDERS - Receive rate prescribed for craft performing operation to which welding is incidental.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the

Davis-Bacon Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year.

Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is a victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at https://www.dol.gov/agencies/whd/government-contracts.

Unlisted classifications needed for work not included within the scope of the classifications listed may be added after award only as provided in the labor standards contract clauses

(29CFR 5.5 (a) (1) (ii)).

The body of each wage determination lists the classification and wage rates that have been found to be prevailing for the cited type(s) of construction in the area covered by the wage determination. The classifications are listed in alphabetical order of ""identifiers"" that indicate whether the particular rate is a union rate (current union negotiated rate for local), a survey rate (weighted average rate) or a union average rate

(weighted union average rate).

Union Rate Identifiers

A four letter classification abbreviation identifier enclosed in dotted lines beginning with characters other than ""SU"" or

""UAVG"" denotes that the union classification and rate were prevailing for that classification in the survey. Example:

PLUM0198-005 07/01/2014. PLUM is an abbreviation identifier of the union which prevailed in the survey for this classification, which in this example would be Plumbers. 0198 indicates the local union number or district council number where applicable, i.e., Plumbers Local 0198. The next number, 005 in the example, is an internal number used in processing the wage determination. 07/01/2014 is the effective date of the most current negotiated rate, which in this example is July 1, 2014.

Union prevailing wage rates are updated to reflect all rate changes in the collective bargaining agreement (CBA) governing this classification and rate.

Survey Rate Identifiers

Classifications listed under the ""SU"" identifier indicate that no one rate prevailed for this classification in the survey and the published rate is derived by computing a weighted average rate based on all the rates reported in the survey for that classification. As this weighted average rate includes all rates reported in the survey, it may include both union and non-union rates. Example: SULA2012-007 5/13/2014. SU indicates the rates are survey rates based on a weighted average calculation of rates and are not majority rates. LA indicates the State of Louisiana. 2012 is the year of survey on which these classifications and rates are based. The next number, 007 in the example, is an internal number used in producing the wage determination. 5/13/2014 indicates the survey completion date for the classifications and rates under that identifier.

Survey wage rates are not updated and remain in effect until a new survey is conducted.

Union Average Rate Identifiers

Classification(s) listed under the UAVG identifier indicate that no single majority rate prevailed for those classifications; however, 100% of the data reported for the classifications was union data. EXAMPLE: UAVG-OH-0010

08/29/2014. UAVG indicates that the rate is a weighted union average rate. OH indicates the state. The next number, 0010 in the example, is an internal number used in producing the wage determination. 08/29/2014 indicates the survey completion date for the classifications and rates under that identifier.

A UAVG rate will be updated once a year, usually in January of each year, to reflect a weighted average of the current negotiated/CBA rate of the union locals from which the rate is based.

WAGE DETERMINATION APPEALS PROCESS

1.) Has there been an initial decision in the matter? This can be:

* an existing published wage determination

* a survey underlying a wage determination

* a Wage and Hour Division letter setting forth a position on a wage determination matter

* a conformance (additional classification and rate) ruling

On survey related matters, initial contact, including requests for summaries of surveys, should be with the Wage and Hour

National Office because National Office has responsibility for the Davis-Bacon survey program. If the response from this initial contact is not satisfactory, then the process described in 2.) and 3.) should be followed.

With regard to any other matter not yet ripe for the formal process described here, initial contact should be with the

Branch of Construction Wage Determinations. Write to:

Branch of Construction Wage Determinations

Wage and Hour Division

U.S. Department of Labor

200 Constitution Avenue, N.W.

Washington, DC 20210

2.) If the answer to the question in 1.) is yes, then an interested party (those affected by the action) can request review and reconsideration from the Wage and Hour Administrator

(See 29 CFR Part 1.8 and 29 CFR Part 7). Write to:

Wage and Hour Administrator

U.S. Department of Labor

The request should be accompanied by a full statement of the interested party's position and by any information (wage payment data, project description, area practice material, etc.) that the requestor considers relevant to the issue.

3.) If the decision of the Administrator is not favorable, an interested party may appeal directly to the Administrative

Review Board (formerly the Wage Appeals Board). Write to:

Administrative Review Board

U.S. Department of Labor

4.) All decisions by the Administrative Review Board are final.

END OF GENERAL DECISIO"

File details come from the government source that posted it. Updated .