02 1602100 J Electrical CTG Ver 1.0 08-12-2024 D.pdf

SECTION J

DOCUMENTS, EXHIBITS, AND OTHER ATTACHMENTS

TABLE OF CONTENTS

ATTACHMENT NUMBER ATTACHMENT TITLE

J-1602100-01 Definitions and Acronyms J-1602100-02 References and Technical Documents J-1602100-03 Equipment and Inventory

ATTACHMENT J-1602100-01

DEFINITIONS AND ACRONYMS

Combustion Turbine Generator

A gas turbine is a combustion engine at the heart of a power plant that can convert natural gas or other liquid fuels to mechanical energy. This energy then drives a generator that produces the electrical energy that moves along power lines to homes and businesses.

Exchange Engine Program

When a major turbomachinery overhaul is necessary an exchange engine is provided as part of the overhaul service.

Planned Maintenance Visits

OEM planned equipment maintenance. Maintenance coverage consists of on Level A and one Level B inspection to be scheduled and performed on each unit at 4,000 (Level A) and 8,000 (Level B) operating hours.

Unscheduled Maintenance / Field Service Call Outs

An extensive local field service network and remote troubleshooting technology that is available to respond quickly to the service needs.

Service Manager A designated service manager to act as a liaison between the Government and the Contractor. The service manager provides the Government with a technical focal point for remote trouble-shooting, technical support, and maintenance planning and execution.

Package Parts Repair or Replacement

OEM Certified Parts to replace defective or warn parts.

Maintenance Consumables and Tooling

The required resources are at the site before the maintenance intervention starts. The provision of consumable parts and special maintenance tooling is included.

Generator Inspections, Repair and Maintenance

Generator inspections, planned maintenance, and listed repairs for the generator and gearbox.

Semi-Annual Operation and Maintenance Reports

Operation and maintenance reports to describing the health of the turbomachinery package, activities completed at the site, maintenance performed, parts replaced, and turbine performance.

Condition Assessment Visit (CAV) and Equipment Condition Report

At least one or more on-site Condition Assessment Visit and report during the term of the agreement. The CAV report will provide the Government with a description of the turbomachinery’s condition and provide detailed recommendations to address equipment and operation enhancements that could improve equipment reliability.

Repair Repair is the restoration of facilities or equipment to such a condition that it may be effectively utilized for its designated purposes by overhaul, reconstruction, or replacement of constituent parts or materials which have deteriorated by action of the elements or usage, and which have not been corrected through maintenance. This term also applies to replacement of the entire unit or system if beyond economical repair. The intent of repair is to have the equipment at normal working condition.

ATTACHMENT J-1602100-01

DEFINITIONS AND ACRONYMS

Replacement Replacement, as a distinct work element, is confined to a program of planned replacement of a facility or its components. It may be further limited to major components such as air conditioning compressors, furnaces or hot water heaters.

Replacement is performed when the equipment has reached the end of its useful life;

when it no longer can perform due to degradation of its internal components and repair is no longer cost effective. Included under the replacement would be the major rebuilding of any component, since rebuilding also restores performance.

Acronym Title ANSI American National Standards Institute CAV Condition Assessment Visit CTG Combustion Turbine Generator ET Engineering Technician KO Contracting Officer NAVFAC Naval Facilities PAR Performance Assessment Representative PM Project Manager

ATTACHMENT J-1602100-02

REFERENCES AND TECHNICAL DOCUMENTS

Reference Title 49 CFR Part 192 Transportation of Natural and Other Gas by Pipeline: Minimum Federal

Safety Standards 29 CFR Part 1910.147 The Control of Hazardous Energy UFC 3-430-05 Natural Gas and Liquefied Petroleum Gas UFC 3-540-07 Operation and Maintenance (O&M): Generators UFC 3-560-01 Electrical Safety O&M NEC National Electric Code NFPA National Fire Prevention Code IBC International Building Code IMC International Mechanical Code IPC International Plumbing Code NAVFAC P-307 Management of Weight Handling Equipment

Non-Government Publications.

23 58 00 Combustion Turbine Generator Set (CTG)

• Volume 1 – System Operator’s Guide

• Volume II – Maintenance Instructions

• Volume III – Supplementary Data, Sub Sections A – B – C – D – E

• Volume IV – Illustrated Parts List

ATTACHMENT J-1602100-03

COMBUSTION TURBINE GENERATOR CTG-1

EQUIPMENT DESCRIPTION AND INVENTORY

Combustion Turbine Generator Set

Process Overview The Solar Turbines Inc., Centaur 50 – 6201S gas turbine-driven generator set is an axial-flow turbine driving a generator through a gear set.

The CTG identifies as follows:

• Model Number Centaur 50 – 6201S

• Assembly Number 2-3R351

• Serial Number CG13971

Equipment Overview This package consists of multiple systems including Start System, Fuel System, Electrical Control System, Lube Oil System, Turbine, and Generator.