Conformed_Amendment_2_N00421-8-R-0032.pdf

CODE

(Hour)

PAGE(S)

until 02:00 PM local time 10 Oct 2018

X

A

X B

X C X D

EX

X

G

F 73 - 76

77 - 88

X H 89 - 92 maria.mattei-chaney@navy .mil

RATING PAGE OF PAGES

7. ISSUED BY

(Date)

IMPORTANT - Award will be made on this Form, or on Standard Form 26, or by other authorized official written notice.

Previous Edition is Unusable 33-134 STANDARD FORM 33 (REV. 9-97)

Prescribed by GSA

FAR (48 CFR) 53.214(c)

1 92

(If other than Item 7)

15A. NAME 16. NAME AND TITLE OF PERSON AUTHORIZED TO

AND

ADDRESS

SIGN OFFER (Type or print)

OF

OFFEROR

AMENDMENT NO. DATE

15B. TELEPHONE NO (Include area code) 17. SIGNATURE15C. CHECK IF REMITTANCE ADDRESS

IS DIFFERENT FROM ABOVE - ENTER

SUCH ADDRESS IN SCHEDULE.

18. OFFER DATE

1. THIS CONTRACT IS A RATED ORDER

UNDER DPAS (15 CFR 700)

2. CONTRACT NO.

N00421 8. ADDRESS OFFER TO

See Item 7

9. Sealed offers in original and 1 copies for furnishing the supplies or services in the Schedule will be received at the place specified in Item 8, or if handcarried, in the depository located in

CAUTION - LATE Submissions, Modifications, and Withdrawals: See Section L, Provision No. 52.214-7 or 52.215-1. All offers are subject to all terms and

47060 Lijencrantz Rd Bldg 433 conditions contained in this solicitation.

10. FOR INFORMATION

CALL:

A. NAME (NO COLLECT CALLS)

MARIA MATTEI-CHANEY 301-737-7566

11. TABLE OF CONTENTS

SOLICITATION/ CONTRACT FORM

SUPPLIES OR SERVICES AND PRICES/ COSTS

1 - 3

4 - 6

X I CONTRACT CLAUSES

DESCRIPTION/ SPECS./ WORK STATEMENT X

PACKAGING AND MARKING

7 - 33

34 - 36

J LIST OF ATTACHMENTS

INSPECTION AND ACCEPTANCE

DELIVERIES OR PERFORMANCE

37 - 38

39 - 40 X K

REPRESENTATIONS, CERTIFICATIONS AND

OTHER STATEMENTS OF OFFERORS

CONTRACT ADMINISTRATION DATA 41 - 46 X

SPECIAL CONTRACT REQUIREMENTS

OFFER (Must be fully completed by offeror) 47 - 60 X M

L INSTRS., CONDS., AND NOTICES TO OFFERORS

EVALUATION FACTORS FOR AWARD

NOTE: Item 12 does not apply if the solicitation includes the provisions at 52.214-16, Minimum Bid Acceptance Period.

is inserted by the offeror) from the date for receipt of offers specified above, to furnish any or all items upon which prices are offered at the price set opposite each item, delivered at the designated point(s), within the time specified in the schedule.

13. DISCOUNT FOR PROMPT PAYMENT

(See Section I, Clause No. 52.232-8)

14. ACKNOWLEDGMENT OF AMENDMENTS

(The offeror acknowledges receipt of amendments

AMENDMENT NO. DATE

to the SOLICITATION for offerors and related documents numbered and dated):

FACILITY

12. In compliance with the above, the undersigned agrees, if this offer is accepted within calendar days (60 calendar days unless a different period

SOLICITATION, OFFER AND AWARD

X

(X) SEC. DESCRIPTION (X) SEC. DESCRIPTION PAGE(S)

PART I - THE SCHEDULE

26. NAME OF CONTRACTING OFFICER (Type or print) 27. UNITED STATES OF AMERICA 28. AWARD DATE

EMAIL:TEL: (Signature of Contracting Officer)

CODE CODE

B. TELEPHONE (Include area code) C. E-MAIL ADDRESS

AWARD (To be completed by Government)

19. ACCEPTED AS TO ITEMS NUMBERED 20. AMOUNT 21. ACCOUNTING AND APPROPRIATION

22. AUTHORITY FOR USING OTHER THAN FULL AND OPEN COMPETITION:

10 U.S.C. 2304(c)( ) 41 U.S.C. 253(c)( ) (4 copies unless otherwise specified)

23. SUBMIT INVOICES TO ADDRESS SHOWN IN ITEM

24. ADMINISTERED BY (If other than Item 7) CODE 25. PAYMENT WILL BE MADE BY CODE

PART IV - REPRESENTATIO NS AND INSTRUCTIO NS

PART III - LIST O F DO CUMENTS, EXHIBITS AND O THER ATTACHMENTS

61 - 71

PART II - CO NTRACT CLAUSES

NAVAL AIR WARFARE CENTER AD (PAX)

BLDG 433, 47060 LILJENCRANTZ ROAD

PATUXENT RIVER MD 20670

FAX:

TEL:

FAX:

TEL:

NOTE: In sealed bid solicitations "offer" and "offeror" mean "bid" and "bidder".

SOLICITATION

6. REQUISITION/PURCHASE NO.

1300552866

5. DATE ISSUED

10 Sep 2018

4. TYPE OF SOLICITATION

SEALED BID (IFB)

NEGOTIATED (RFP)

[ X ]

3. SOLICITATION NO.

N00421-18-R-0032

Section A - Solicitation/Contract Form

NOTES

Amendment 2 changes are:

1. Section C: page 26 10.6 from Engineering Technician IIII (BLS SOC No. 17-3029, SCA Code 30081) to

Engineering Technician III (BLS SOC No. 17-3029, SCA Code 30083)

2. Section H- H-2 Clause: page 52 added ***Applicable to MAC task orders only*** to the end of clause.

3. Section L Part A: page 76 1.0 General removed “or provides on or more Key Personnel” and added

“ hours” to sample task.

4. Section L Part A: page 76 2.0 Proposal format added “and shall be no smaller than 10 pt font. Headers and Footers shall be no smaller than 7pt font.”

5. Section L Part A: page 77 3.0 Proposal Content and Volumes table, removed “narrative” from Past

Performance Volume Title and added “plus attachment P1 to Volume 2 Past Performance page limit.

Removed “Electronic copy” from Copies Required for Volume 2 Past Performance and added CD RM.

6. Section L Part B: page 82 revised language from “The Offeror(s) shall provide a narrative in addition to each Past Performance Information Form in the “Contract Effort Description” area that clearly describes how each contract reference has relevant work effort that matches the relevancy definitions specified in Section M of the solicitation” to “The Offeror(s) shall provide a Volume 2 Past Performance narrative in addition to the Past Performance Information Form(P1) that clearly describes how each contract reference has relevant work effort that matches the relevancy definitions specified in Section M of the solicitation.”

Amendment 1changes are:

1. Section K page 72: Clause 252.204-7007 SB Size standard revised from $38,000.00 to 1,250 employees.

2. Added volume 3 EXECUTIVE SUMMARY to Section L Part A, paragraph 3.0 PROPOSAL CONTENT AND

VOLUMES table and revised Volume 2 PAST PERFORMANCE to include “narrative”

3. Revised Section L Part B paragraph 3.0 title to Volume 3 EXECUITIVE SUMMARY

4. Added to Section L Part B paragraph 4.0 moving Incumbent Contractor information to this paragraph

4. Added incumbent contractor’s contract numbers in section L Part B paragraph 4.0

Admin note: This RFP utilizes Class Deviation (2018-O0006, dated 13 DEC 2017) which permits Multiple Award

Contracts (MACs) to exclude price/cost as an evaluation factor under certain conditions.

1. The Product Service Code (PSC) for this procurement is AC65, Defense Electronics and Communication

Equipment – Operational Systems Development.

2. In accordance with NAVAIR Clause 5252.216-9506, the maximum value of this contract is $235,005,565.00.

3. A Lot is defined as a five year ordering period (no option periods) for a specific CLIN (no option periods) to include all associated task orders placed during the ordering periods.

4. The contractor will be required to have a SECRET facility clearance and a Secret clearance for personnel identified in Section Statement of Work (SOW) prior to issuance of a task order under this contract. The contractor will not be permitted access to classified information until a final DD254 is incorporated as an attachment to the contract.

POINTS OF CONTACT

Contract Specialist: Maria Mattei-Chaney

Phone: 301-757-0740

E-mail: maria.mattei-chaney@navy.mil

Procuring Contracting Officer: Frank Douglass

Phone: 301-757-0463 mailto:rhonda.garcia@navy.mil

E-mail: frank.douglass@navy.mil mailto:frank.douglass@navy.mil

Section B - Supplies or Services and Prices

NOTES

At the IDIQ level, CLINs 0001, 0002, 0003, 0004, and 0005 may contain the overall ceiling for ABM MAC.

ITEM NO SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT

0001 1 Lot

ABM MAC Labor

CPFF

Ceiling CLIN in support of the Section C SOW

Fixed Fee will be determined at task order level

FOB: Destination

PURCHASE REQUEST NUMBER: 1300552866

ESTIMATED COST

FIXED FEE

TOTAL EST COST + FEE

0002 1 Lot ABM MAC FFP Labor

FFP

Ceiling CLIN in support of the Section C SOW

NET AMT

0003 1 Lot Travel (ISO) CLIN 0001

COST

0004 1 Lot Material ISO CLIN 0001

COST

Ceiling CLIN in support of the Section C SOW

NOTE: The requirements in DFARS 252.211-7003, Item Identification and

Valuation, are applicable for this line item. The contractor shall provide DoD unique identification or a DoD recognized unique identification equivalent.

0005 1 Lot Field Services ISO CLIN 0001

COST

NSP Data CLIN

In Support of (ISO) CLINs 0001, 0002, 0003, 0004, & 0005

NET AMT

CLAUSES INCORPORATED BY FULL TEXT

5252.204-9501 NATIONAL STOCK NUMBERS (NAVAIR)(MAR 2007)

(a) This clause applies to supplies that are stock numbered under Federal Catalog System procedures.

(b) Unless otherwise authorized by the Contracting Officer, in writing, the Contractor shall not deliver any supplies until the supplies have been marked with a National Stock Number. All available National Stock Numbers will be furnished by the Government. If National Stock Numbers are not furnished by the Government in time to meet the delivery schedule for the supplies, the Contractor may present the supplies that are scheduled for delivery to the Contracting Officer for acceptance. The Contracting Officer may accept such supplies without National Stock

Numbers and the Government will pay the Contractor, provided that title to the supplies is vested in the

Government.

(c) The term "Federal Stock Number" (FSN), which may be referred to in the specifications of this contract or elsewhere in this contract, shall mean "National Stock Number" (NSN), and the term "Federal Item Identification

Number", wherever it appears, shall mean "National Item Identification Number".

(As used in the foregoing clause, the term "Contracting Officer" shall mean the "Administrative Contracting

Officer" (ACO) with respect to provisioned items and other supplies ordered by the ACO.)

Section C - Descriptions and Specifications

DESCRIPTION

DESCRIPTION

Items 0001 and 0002 – The contractor shall provide services In Accordance with (IAW) and within the scope of the

Section C Statement of Work (SOW) of the basic contract as detailed in the individual task orders.

Items 0003 – The contractor shall provide travel IAW the NAVAIR clause 5252.237-9509 and within the scope of the Section C SOW of the basic contract as detailed in the individual task orders.

Items 0004 and 0005 – The contractor shall provide material IAW the H-1 clause RESTRICTION ON THE

DIRECT CHARGING OF MATERIAL and within the scope of the Section C SOW of the basic contract as detailed in the individual task orders.

Item 0006 – The data to be furnished hereunder shall be IAW the Exhibit A, DD Form 1423, Contract Data

Requirements Lists (CDRLs) and within the scope of the Section C SOW of the basic contract as detailed in the individual task orders.

STATEMENT OF WORK

TRAINING, MAINTENANCE, AND UPGRADES FOR THE AIR TRAFFIC CONTROL DIVISION, AREA

CONTROL SYSTEMS BRANCH

1.0. INTRODUCTION. The Naval Air Warfare Center Aircraft Division (NAWCAD) Patuxent River, St. Inigoes, Air Traffic Control (ATC) Systems Division, Area Control Systems (ACS) Branch Code 4.11.7.3 is the technical/acquisition Engineering Agent for mobile air battle management systems and communication-electronic support systems. NAWCAD 4.11.7.3 provides the following support for the United States Navy (USN), United

States Air Force (USAF), United States Marine Corps (USMC) and other DoD activities: operational, technical, logistical and system engineering support in system certification; technical assistance; systems analysis and engineering; test and evaluation; installation and maintenance; hardware design, development, technical logistics support; configuration management; training support; equipment manufacturing; quality control; and project management.

1.1. Scope. The contractor shall provide technical products and services as designated by the task orders IAW this

Statement of Work (SOW) and Contract Data Requirements Lists (CDRLs) for the various systems under the

NAWCAD Code 4.11.7 ATC Systems Division's cognizance.

2.0. APPLICABLE DOCUMENTS. The following is a list of known documents that will be referred to during the performance of task order under the technical and engineering services required by this SOW, the latest version of the listed documents shall apply and can be found on the ASSIST web site at http://quicksearch.dla.mil/qsSearch.aspx, which provides direct access to Defense and Federal specifications and standards. Please use the most recent version of the following list of documents. Additional documents will be identified at the task order level.

2.1. REFERENCE DOCUMENTS

NUMBER TITLE

MIL-P-24534 Planned Maintenance System; Development of

OPNAVINST 3432.1 Operations Security

ISO 9001:2000 International Organization for Standardization (ISO) 9001:2000 Quality

Management Systems

AIR-7.2/7.4 Policy Memo Information Technology (IT) Positions

NAVAIRINST 4355.19D Systems Engineering

MIL-HDBK-61A(SE) Configuration Management Guidance

MIL-HDBK-2036 Electronic Equipment Specifications, Preparation of

NAVSEAINST 4790.3 Policy and Responsibility for Processing Planned Maintenance System (PMS)

Technical Feedback Reports

NAWCADINST 5510.1A NAVAIRWARCENACDIV Information Personnel and Industrial Security

Program Manual

NSDD 298 National Security Decision Directive

DoD Manual 5200.1R Information Security Program Regulations

3.0. REQUIREMENTS. CLINs 0001 through 0006. The contractor shall provide support to perform the tasks listed in paragraphs 3.1-3.10 below for DoD Air Traffic Management (ATM) Systems to include, but not be limited to: Combat Reporting Center Simulation Package (CSP); Non-Organic Radar Access (NORA); TPS-59 Radar

Control and USMC Communication Squadron Maintenance Shelters; Remote Radio Secure Voice Systems; Battle

Control Systems (BCS); Precision Approach Radar (PAR); Instrument Landing System (ILS); Ground-Based Sense and Avoid (GBSAA); Fleet Area Control Tracking Systems (FACTS); Navy Scheduling Systems (NAVSKED);

Integrated Range Status System (IRSS); AN/TPN-31A Air Traffic Navigation Integration and Coordination System

(ATNAVICS); Tactical Air Navigation (TACAN); Airfield Mobile TACAN (AMTAC); and other similar systems within NAWC Code 4.11.7 ATC Systems Division's cognizance. The contractor shall also perform the tasking below to assist in the maturation and integration of in-development systems such as Joint Precision Approach and

Landing Systems (JPALS) and unmanned initiatives in support of ATM capabilities.

3.1. System Certification.

3.1.1. Requirements CLINs 0001 through 0006. The contractor shall provide system certification support for certification and verification tests on fielded equipment at shore stations. If any existing certification and verification procedures are outdated because of hardware or software changes, the contractor shall provide recommended changes to the certification and verification procedures.

3.1.1.1. Deliverable Products. Contractor shall prepare and deliver the following:

a. Trip Report (CDRL A001)

3.1.2. Requirements CLINs 0001 through 0006. The contractor shall provide system certification support for certification and verification tests on ECP modifications to fielded equipment at shore stations. If any certification and verification procedures are outdated because of hardware and software changes, the contractor shall provide recommended changes to the certification and verification procedures.

3.1.2.1. Deliverable Products. Contractor shall prepare and deliver the following:

3.1.3. Requirements CLINs 0001 through 0006. The contractor shall provide system certification support for certification and verification tests on SCN-type equipment at shore stations. If any certification and verification procedures are outdated because of hardware and software changes, the contractor shall provide recommended changes to the certification and verification procedures.

3.1.3.1. Deliverable Products. Contractor shall prepare and deliver the following:

3.2 Technical Support.

3.2.1. Requirements CLINs 0001 through 0006. The contractor shall provide engineering and technical services for maintenance testing of fielded equipment and monitor, track, and report any unresolved deficiencies. Contractor shall respond to technical assistance requests on fielded equipment and provide technical services including but not limited to: equipment fault isolation and repair; restoration of systems to normal operating condition; on-the-job

(OJT) training of military technicians; and provide status briefing to the military chain of command and COR upon completion of the event. In some cases, technical assistance response may be provided by telephone or e-mail. The contractor shall document technical assistance responses provided by telephone or e-mail in the Monthly Progress

Status Report.

3.2.1.1. Deliverable Products. Contractor shall prepare and deliver the following:

b. Progress Status Report (CDRL A035)

3.2.2. Requirements CLINs 0001 through 0006. The contractor shall provide production engineering and technical services for test and evaluation of modifications to fielded equipment and monitor, track, and report any unresolved deficiencies. Contractor shall respond to technical assistance requests on modified fielded equipment and provide technical services in support of ECP efforts to include but not limited to: equipment fault isolation and repair;

restoration of systems to normal operating condition; on-the-job (OJT) training of military technicians; and status briefing of military chain of command and COR upon completion of the event. In some cases, technical assistance response may be provided by telephone or e-mail. The contractor shall document the technical assistance responses provided by telephone or e-mail in the Monthly Progress Status Report.

3.2.2.1 Deliverable Products. Contractor shall prepare and deliver the following:

b. Progress Status Report (CDRL A035)

3.3. Provisioning Support.

3.3.1. Requirements CLINs 0001 through 0006. The contractor shall provide provisioning support including translating technical requirements and program constraints for inputs into acquisition documentation, ordering, maintaining status accounting, receiving provisioning items, controlling inventory, and distributing equipment. The contractor shall:

a. Maintain storerooms and/or warehouses for the storage of equipment spares and repair parts and provide an inventory report IAW PGI clause. 245.103-72.

b. Monitor the spare parts inventory and recommend parts to be procured when quantities are low.

c. Order and track material and services to support equipment and projects.

d. Receive material to support equipment and projects.

e. Ship and track material to support equipment and projects.

3.3.1.1. Deliverable Products. Contractor shall prepare and deliver the following:

a. Inventory List Report (CDRL A002)

b. Provisioning Order Status Accounting Report (CDRL A003)

c. Receivables Accounting Report (CDRL A004)

d. Shipping Accounting Report (CDRL A005)

3.3.2. Requirements CLINs 0001 through 0006 The contractor shall provide provisioning support including translating technical requirements and program constraints for inputs into acquisition documentation, ordering, maintaining status accounting, receiving provisioning items, controlling inventory, and distributing equipment. The contractor shall:

a. Maintain storerooms and/or warehouses for the storage of equipment spares and repair parts and provide an inventory report IAW PGI clause. 245.103-72.

b. Monitor the spare parts inventory and recommend parts to be procured when quantities are low.

c. Order and track material and services to support equipment and projects.

3.3.2.1. Deliverable Products. Contractor shall prepare and deliver the following:

b. Provisioning Order Status Accounting Report (CDRL A003)

3.3.3. Requirements CLINs 0001 through 0006 The contractor shall provide provisioning support including translating technical requirements and program constraints for inputs into acquisition documentation, ordering, maintaining status accounting, receiving provisioning items, controlling inventory, and distributing equipment. The contractor shall:

a. Maintain storerooms and/or warehouses for the storage of equipment spares and repair parts and provide an inventory report IAW PGI 245.103-72.

b. Monitor the spare parts inventory and recommend parts to be procured when quantities are low.

c. Order and track material and services to support equipment and projects.

3.3.3.1. Deliverable Products. Contractor shall prepare and deliver the following:

b. Provisioning Order Status Accounting Report (CDRL A003)

3.3.4. Requirements CLINs 0001 through 0006. The contractor shall provide provisioning support including translating technical requirements and program constraints for inputs into acquisition documentation, ordering, maintaining status accounting, receiving provisioning items, controlling inventory, and distributing equipment. The contractor shall:

a. Maintain storerooms and/or warehouses for the storage of equipment spares and repair parts and provide an inventory report IAW PGI 245.103-72.

b. Monitor the spare parts inventory and recommend parts to be procured when quantities are low.

c. Order and track material and services to support equipment and projects.

d. Receive material to support equipment and projects.

e. Ship and track material to support equipment and projects.

3.3.4.1. Deliverable Products. Contractor shall prepare and deliver the following:

a. Inventory List Report (CDRL A002)

b. Provisioning Order Status Accounting Report (CDRL A003)

3.4 Systems Engineering.

3.4.1. Requirements CLINs 0001 through 0006. The contractor shall provide production engineering, integrated logistics support, and technical support for the improvement of production items. The contractor shall:

a. Recommend improvements for system performance, reliability, maintainability, and supportability.

b. Provide proposed system improvements, engineering change proposals (ECPs), field change bulletins

(FCBs), trouble reports (TRs), and provide recommendations as to their acceptability. Contractor shall review and conduct an analysis of equipment performance, configuration, standardization, compatibility and interface, and system specifications in support of system improvements.

c. Analyze and recommend solutions for system performance and procedural problems reported

d. Provide updated installation control drawings (ICDs) for shore stations. Interface with station personnel on installation problems. Contractor shall also provide technical support for solutions to systems installation problems at shore facilities.

e. Provide field change kits ready for installation. Kits must be complete prior to scheduled installation.

f. Analyze maintenance, material management (3M) and casualty report (CASREP) failure data to determine the annual cost of ownership for each system and to determine the obtained operational availability for each system. Data shall be submitted in a recommendations report.

g. Provide configuration management of drawings for all ATC systems equipment. Contractor shall also provide a quarterly Configuration Status Accounting Report.

h. Provide a Software Development Plan.

3.4.1.1. Deliverable Products. Contractor shall prepare and deliver the following:

b. Recommendations Report (CDRL A006)

c. Engineering Report (CDRL A007)

d. Provisioning Parts List (PPL) (CDRL A009)

e. Provisioning Technical Documentation (PTD) (CDRL A010)

f. Drawing Configuration Status Accounting Report (CDRL A011)

g. System Operation Verification Testing Report (SOVT) (CDRL A012)

h. Software Development Plan (CDRL A040)

3.4.2. Requirements CLINs 0001 through 0006. The contractor shall provide engineering, logistic, and technical support for the improvement of modifications to existing systems. The contractor shall:

a. Recommend improvements for system performance, reliability, maintainability, and supportability.

b. Provide proposed system improvements, engineering change proposals (ECPs), field change bulletins

(FCBs), trouble reports (TRs), and provide recommendations as to their acceptability. Contractor shall review and conduct an analysis of equipment performance, configuration, standardization, compatibility and interface, and system specifications in support of system improvements.

c. Analyze and recommend solutions for system performance and procedural problems reported.

d. Provide updated installation control drawings (ICDs) for shore stations. Interface with station personnel on installation problems. Provide technical support for solutions to systems installation problems at shore facilities.

e. Provide field change kits ready for installation. Kits must be complete prior to scheduled installation.

f. Analyze maintenance, material management (3M) and casualty report (CASREP) failure data to determine the annual cost of ownership for each system and to determine the obtained operational availability for each system. Data shall be submitted in a recommendations report.

g. Provide configuration management of drawings for all ATC systems equipment. Contractor shall also provide a quarterly Configuration Status Accounting Report.

h. Provide a Software Development Plan.

3.4.2.1. Deliverable Products. Contractor shall prepare and deliver the following:

b. Recommendations Report (CDRL A006)

c. Engineering Report (CDRL A007)

d. Provisioning Parts List (PPL) (CDRL A009)

e. Provisioning Technical Documentation (PTD) (CDRL A010)

f. Drawing Configuration Status Accounting Report (CDRL A011)

g. System Operation Verification Testing Report (SOVT) (CDRL A012)

h. Software Development Plan (CDRL A040)

3.5. Systems Upgrades &Development Support

3.5.1. Requirements CLINs 0001 through 0006. The contractor shall provide engineering, integrated logistics support, and technical support for system upgrades. The contractor shall:

a. Review and analyze proposed systems operational and performance specification requirements. Tasks include operational and performance requirements recommendations, review, and analyses; equipment performance, configuration, standardization and compatibility analyses; interface analyses; and system specification reviews in support of new system acquisitions.

b. Support equipment development to ensure system compatibility and compliance with applicable

Government standards, specifications, performance requirements, quality assurance, and test provisions.

Such tasks shall include review of development documentation, test documentation, and technical and operator's manuals for acceptability with SOW/specification and CDRL requirements. Contractor shall support the Government in program reviews, design reviews, and configuration audits.

c. Prepare or review ICDs for shore stations. Interface with shore station personnel and other cognizant activities to present system installation requirements and resolve any installation problems.

d. Provide configuration management of drawings for all equipment. Contractor shall provide a quarterly

Configuration Status Accounting Report.

e. The contractor shall provide support in the development and presentation of training material for use in familiarizing personnel with the operation and maintenance of new or modified software and hardware.

Training materials developed under this paragraph are subject to DFARS 252.227-7020.

f. The contractor shall provide support for the planned maintenance of the systems, development of maintenance requirement cards (MRC’s), and maintenance index pages in accordance with MIL-P-24534

Planned Maintenance System.

3.5.1.1 Deliverable Products. Contractor shall prepare and deliver the following:

b. Engineering Report (CDRL A007)

c. Recommendations Report (CDRL A006)

d. Training System Plan (CDRL A013)

e. Integrated Logistics Support Plan (CDRL A014)

f. User Logistics Support Summary (CDRL A015)

g. Maintenance Plan (CDRL A016)

h. Life Cycle Documentation (CDRL A017)

i. Installation Control Drawings (ICDs) (CDRL A008)

j. Provisioning Parts List (CDRL A009)

k. Provisioning Technical Documentation (CDRL A010)

l. Preventative Maintenance System Maintenance Requirement Cards (MRC) (CDRL A018)

m. Preventative Maintenance System Maintenance Index Pages (MIP) (CDRL A019)

n. Drawing Configuration Status Accounting Report (CDRL A011)

3.5.2. Requirements CLINs 0001 through 0006. The contractor shall provide engineering, logistic, and technical support for the development of new systems. The contractor shall:

a. Review and analyze proposed systems operational and performance specification requirements. Tasks include operational and performance requirements recommendations, review, and analyses; equipment performance, configuration, standardization and compatibility analyses; interface analyses; and system specification reviews in support of new system acquisitions.

b. Support equipment development to ensure system compatibility and compliance with applicable

Government standards, specifications, performance requirements, quality assurance, and test provisions.

Such tasks shall include review of development documentation, test documentation, and technical and operator's manuals for acceptability with SOW/specification and CDRL requirements. Contractor shall support the Government in program reviews, design reviews, and configuration audits.

c. Prepare or review ICDs for shore stations. Interface with shore station personnel and other cognizant activities to present system installation requirements and resolve any installation problems.

d. Provide configuration management of drawings for all equipment. Provide a quarterly Configuration

Status Accounting Report.

e. The contractor shall provide support in the development and presentation of training material for use in familiarizing personnel with the operation and maintenance of new or modified software and hardware.

Training materials developed under this paragraph are subject to DFARS 252.227-7020.

f. The contractor shall provide support for the planned maintenance of the systems, development of maintenance requirement cards (MRC’s), and maintenance index pages in accordance with MIL-P-24534

Planned Maintenance System.

3.5.2.1 Deliverable Products. Contractor shall prepare and deliver the following:

b. Engineering Report (CDRL A007)

c. Recommendations Report (CDRL A006)

d. Training System Plan (CDRL A013)

e. Integrated Logistics Support Plan (CDRL A014)

f. User Logistics Support Summary (CDRL A015)

g. Maintenance Plan (CDRL A016)

h. Life Cycle Documentation (CDRL A017)

i. Installation Control Drawings (ICDs) (CDRL A008)

j. Provisioning Parts List (CDRL A009)

k. Provisioning Technical Documentation (CDRL A010)

l. Preventative Maintenance System Maintenance Requirement Cards (CDRL A018)

m. Preventative Maintenance System Maintenance Index Pages (CDRL A019)

n. Drawing Configuration Status Accounting Report (CDRL A011)

3.5.3. Requirements CLINs 0001 through 0006. The contractor shall provide engineering and technical services in support of testing and evaluation of SCN equipment. The contractor shall:

a. Develop test plans and procedures to support acceptance testing of SCN systems to determine conformance to system specifications and performance and operational requirements.

b. Develop new or modify existing production acceptance test plans and procedures to support SCN systems certifications.

c. Evaluate systems using the Government approved test plans and procedures to determine the degree of conformance with system specifications and performance and operational requirements. Contractor shall prepare interim and final engineering reports detailing test completion status, test results, and recommendations for all tests and evaluations conducted.

d. Provide support in SCN acceptance tests and evaluations of systems performed by activities in other shore locations.

e. Status and track the hardware (HW) and software (SW) configuration of the equipment under test.

3.5.3.1. Deliverable Products. Prepare and deliver the following:

b. Acceptance Test Plans and Procedures (CDRL A020)

c. Test Plans and Procedures (CDRL A021)

d. Test Report (CDRL A022)

e. Engineering Report (CDRL A007)

f. Problem Report (CDRL A023)

g. Configuration Status Accounting Sheet Information (CDRL A041)

h. Version Description Document (CDRL A042)

3.6. Systems Test and Evaluation

3.6.1. Requirements CLINs 0001 through 0006. The contractor shall provide engineering and technical services in support of testing and evaluation of equipment under production systems. The contractor shall:

a. Develop test plans and procedures to support production acceptance testing of new or modified systems to determine conformance to system specifications and performance and operational requirements.

b. Develop new or modify existing production acceptance test plans and procedures to support systems certifications.

c. Evaluate systems using the Government approved test plans and procedures to determine the degree of conformance with system specifications and performance and operational requirements. Contractor shall prepare interim and final engineering reports detailing test completion status, test results, and recommendations for all tests and evaluations conducted.

d. Provide support in production acceptance tests and evaluations of systems performed by activities in other shore locations.

e. Status and track the HW and SW configuration of the equipment under test.

3.6.1.1. Deliverable Products. Prepare and deliver the following:

b. Acceptance Test Plans and Procedures (CDRL A020)

c. Test Plans and Procedures (CDRL A021)

d. Test Report (CDRL A022)

e. Engineering Report (CDRL A007)

f. Problem Report (CDRL A023)

3.6.2. Requirements CLINs 0001 through 0006. The contractor shall provide engineering and technical services in support of testing and evaluating new systems. The contractor shall:

a. Develop test plans and procedures to support acceptance testing of new or modified systems to determine conformance to system specifications and performance and operational requirements.

b. Develop new or modify existing test plans and procedures to support systems certifications.

c. Evaluate systems using the Government approved test plans and procedures to determine the degree of conformance with system specifications and performance and operational requirements. Contractor shall prepare interim and final engineering reports detailing test completion status, test results, and recommendations for all tests and evaluations conducted.

d. Provide support in tests and evaluations of new systems performed by activities in other shore locations.

e. Status and track the HW and SW configuration of the equipment under test.

3.6.2.1. Deliverable Products. Prepare and deliver the following:

b. Acceptance Test Plans and Procedures (CDRL A020)

c. Test Plans and Procedures (CDRL A021)

d. Test Report (CDRL A022)

e. Engineering Report (CDRL A007)

f. Problem Report (CDRL A023)

3.6.3. Requirements CLINs 0001 through 0006. The contractor shall make recommendations related to the design and development of SCN requirements. The contractor shall document, test, fabricate, and install operational hardware. The contractor shall:

a. Recommend engineering changes for the improvement of equipment.

b. Develop, fabricate, and install operational hardware field changes for SCN requirements.

c. Develop test plans and procedures to support testing of SCN systems and field changes to determine conformance to specifications and requirements. Test field changes using the test plans and procedures and provide test results.

d. Fabricate, assemble, and provide the hardware necessary for field change kits and other modifications and improvements to equipment.

e. Provide initial Technical Manual Revisions (TMRs) to document operational hardware

f. Provide technical inputs to Provisioning Parts List (PPL) and Provisioning Technical Documents (PTD).

g. Install operational systems into SCN platforms.

h. In support of SCN requirements: design, develop, fabricate, provide, and install operational software.

3.6.3.1. Deliverable Products. Prepare and deliver the following:

b. Recommendations Report (CDRL A006)

c. Level I/II/III Drawings (CDRL A024)

d. Test Plans and Procedures (CDRL A021)

e. Test Report (CDRL A022)

f. Technical Manual Revisions (CDRL A025)

g. Provisioning Parts List (CDRL A009)

h. Provisioning Technical Documentation (CDRL A010)

i. Version Description Document (CDRL A042)

3.7. Hardware and Software Support. The contractor shall provide hardware and software support for ATC systems and their components. The contractor shall:

3.7.1. Requirements CLINs 0001 through 0006. The contractor shall recommend, design and develop in support of ECPs, test, fabricate or assemble, install, and document field changes and modifications to operational hardware.

The contractor shall:

a. Recommend engineering changes for the improvement of equipment.

b. In support of ECP efforts: design, develop, fabricate, provide, and install prototype hardware field changes.

c. Develop test plans and procedures to support testing of system ECPs and field changes to determine conformance to specifications and requirements. Test field changes using the test plans and procedures and provide test results.

d. Fabricate, assemble, and provide the hardware necessary for field change kits and other modifications and improvements to equipment.

e. Provide Technical Manual Revisions to document field changes and modifications to operational hardware

f. Provide technical inputs to PPLs and PTD.

g. Install field changes in systems and provide an Evaluation Field Change Report (EFCR).

h. Based on accomplishments directly related to systems support, provide monthly inputs to the Fleet Metrics

Form.

i. In support of In Service Engineering Activity (ISEA) requirements and ECP efforts: design, develop, fabricate, provide, and install prototype software field changes.

3.7.1.1. Deliverable Products. Prepare and deliver the following:

b. Recommendations Report (CDRL A006)

c. Level I/II/III Drawings (CDRL A024)

d. Test Plans and Procedures (CDRL A021)

e. Test Report (CDRL A022)

f. Technical Manual Revisions (CDRL A025)

g. Provisioning Parts List (CDRL A009)

h. Provisioning Technical Documentation (CDRL A010)

i. Evaluation Field Change Report (EFCR) (CDRL A026)

j. Fleet Metrics Form (CDRL A027)

k. Version Description Document (CDRL A042)

3.7.2. Requirements CLINs 0001 through 0006. The contractor shall recommend, design, develop, test, prototype, and document field changes and upgrades to operational hardware. The contractor shall:

a. Recommend engineering changes for the improvement of equipment.

b. Design, develop, and prototype hardware field changes.

c. Develop test plans and procedures to support testing of system ECPs and field changes to determine conformance to specifications and requirements. Contractor shall test field changes using the test plans and procedures and provide test results.

d. Fabricate, assemble, and provide the hardware necessary for field change kits and other modifications and improvements to equipment.

e. Provide Technical Manual Revisions to document field changes and modifications to operational hardware

f. Provide technical inputs to PPLs and PTD.

g. Install field changes in systems and provide an EFCR.

h. Based on accomplishments directly related to systems support, provide monthly inputs to the Fleet Metrics

Form.

i. Design, develop, and prototype software field changes.

3.7.2.1. Deliverable Products. Prepare and deliver the following:

b. Recommendations Report (CDRL A006)

c. Level I/II/III Drawings (CDRL A024)

d. Test Plans and Procedures (CDRL A021)

e. Test Report (CDRL A022)

f. Technical Manual Revisions (CDRL A025)

g. Provisioning Parts List (CDRL A009)

h. Provisioning Technical Documentation (CDRL A010)

i. Evaluation Field Change Report (EFCR) (CDRL A026)

j. Fleet Metrics Form (CDRL A027)

k. Version Description Document (CDRL A042)

3.8. Production Support. The contractor shall provide engineering support during the production stage of ATC systems and their components. The contractor shall:

3.8.1. Requirements CLINs 0001 through 0006. The contractor shall fabricate upgrades for systems as follows:

a. Review engineering documentation for producibility and make recommendations for documentation changes and update engineering documentation when changes have been approved.

b. Develop a production program plan of execution and execute the planned requirements.

c. Assemble hardware in accordance with engineering documentation. Contractor shall test hardware for conformance to engineering documentation and provide status of hardware fabrication.

3.8.1.1. Deliverable Products. Prepare and deliver the following:

a. Recommendations Report (CDRL A006)

b. Level I/II/III Drawing Revisions (CDRL A024)

c. Production Program Plan (CDRL A028)

d. Test Report (CDRL A022)

3.8.2. Requirements CLINs 0001 through 0006. The contractor shall design system upgrades as follows:

a. Review engineering documentation for producibility and make recommendations for documentation changes and update engineering documentation when changes have been approved.

b. Develop a production program plan of execution and execute the planned requirements.

c. Assemble hardware in accordance with engineering documentation. Contractor shall test hardware for conformance to engineering documentation and provide status of hardware fabrication.

3.8.2.1. Deliverable Products. Prepare and deliver the following:

a. Recommendations Report (CDRL A006)

b. Level I/II/III Drawing Revisions (CDRL A024)

c. Production Program Plan (CDRL A028)

d. Test Report (CDRL A022)

3.9. Repair and Retrofit Program.

3.9.1. Requirements CLINs 0001 through 0006. The contractor shall overhaul and repair equipment in accordance with system specifications and overhaul procedures. The contractor shall:

a. Develop, revise, and provide overhaul and repair test plans and procedures.

b. Review, develop, revise, and provide Technical Repair Standards (TRS).

c. Perform electrical and mechanical overhaul and repair of equipment.

d. Perform electrical and mechanical tests on overhauled and repaired equipment to ensure proper system performance and provide test results.

3.9.1.1. Deliverable Products. Prepare and deliver the following:

b. Test Plans and Procedures (CDRL A021)

c. Test Report - provide test results and documentation. (CDRL A022)

d. Repair Status Report - provide monthly repair status reports, including shipping and scheduling status.

(CDRL A029)

e. Technical Repair Standards - provide or revise TRSs. (CDRL A030)

3.9.2. Requirements CLINs 0001 through 0006. The contractor shall repair equipment in accordance with system specifications and procedures. The contractor shall:

a. Develop, revise, and provide repair test plans and procedures.

b. Review, develop, revise, and provide Technical Repair Standards (TRS).

c. Perform electrical and mechanical overhaul and repair of equipment under production.

3.9.2.1. Deliverable Products. Prepare and deliver the following:

b. Test Plans and Procedures (CDRL A021)

c. Test Report - provide test results and documentation. (CDRL A022)

d. Repair Status Report - provide monthly repair status reports, including shipping and scheduling status.

(CDRL A029)

e. Technical Repair Standards - provide or revise TRSs. (CDRL A030)

3.10. Program Support.

3.10.1. Requirements CLIN CLINs 0001 through 0006. The contractor shall collect, consolidate, and summarize information such as historical summaries, current project status and project milestones to prepare briefing and presentation material for various program reviews.

3.10.1.1. Deliverable Products. Prepare and deliver the following:

a. Briefing and Presentation Material (CDRL A031)

3.10.2. Requirements CLINs 0001 through 0006. The contractor shall collect, consolidate, and summarize information such as historical summaries, current project status and project milestones to prepare briefing and

3.10.2.1. Deliverable Products. Prepare and deliver the following:

3.10.3. Requirements CLINs 0001 through 0006. The contractor shall collect, consolidate and summarize information such as historical summaries, current project status and project milestones to prepare briefing and

3.10.3.1. Deliverable Products. Prepare and deliver the following:

3.10.4. Requirements CLINs 0001 through 0006. The contractor shall collect, consolidate and summarize information such as historical summaries, current project status and project milestones to prepare briefing and

3.10.4.1. Deliverable Products. Prepare and deliver the following:

4.0. PROGRESS REPORTS.

4.1. Funds Expenditure Report. The contractor shall prepare monthly funds expenditure reports at the task order level. The contractor shall report the costs associated with each SOW paragraph including a breakout of costs per task. The contractor shall reconcile monthly vouchers with these cost data and explain any discrepancies.

4.1.1. Deliverable Products. Prepare and deliver the following:

a. Funds Expenditure Report (CDRL A032)

b. Voucher Reconciliation Report (CDRL A033)

4.2. Time Expenditure Report. The contractor shall prepare monthly time expenditure reports at the task order level including monthly and year-to-date work hours (straight time and overtime), hourly rate, and costs expended per individual. These reports may be reviewed by a support contractor for compilation of data and verification purposes. A nondisclosure form shall be negotiated with the support contractor and a copy provided to the

Government.

4.2.1. Deliverable Products. Prepare and deliver the following:

a. Time Expenditure Report (CDRL A034)

4.3. Segregation of Cost and Invoice Requirements.

(a) The contractor shall segregate costs incurred under each task order, at the lowest level of performance, either by task or by subtask, rather than only on a Contract Line Item Number (CLIN) or total contract basis and shall submit invoices reflecting costs incurred at that level. In addition, the Contractor shall submit invoices containing summaries of work charged during the period covered, as well as overall cumulative summaries for all work invoiced to date.

When there is more than one line of accounting, the Government will describe each ACRN preceding the accounting citation in the contract or a particular CLIN. The Government will pay contractor invoices by charging only an

ACRN corresponding to the CLIN invoiced. Accordingly, when there are many lines of accounting, the

Government will fund each CLIN separately and it will summarize the funding level for each CLIN. The contractor’s invoices shall state separate incremental and cumulative amounts for each CLIN with further segregation by task and subtask showing each element of cost.

Invoices shall contain the following cost elements by schedule and include supporting detail. The contractor shall submit invoices with two attachments. The first attachment shall contain Schedules A through D, F and G and shall be provided as fully burdened. The second attachment shall contain Schedule E.

Invoice summary for current billing period and cumulative:

(Schedule A) – Direct Labor $

(Schedule B) – Material $

(Schedule C) – Travel $

(Schedule D) – Other Direct Charges $

(Schedule E) – Indirect Charges $

(Schedule F) – Adjustments $

TOTAL $

(Schedule G) – Outstanding Commitments

Schedule A – DIRECT LABOR

Period Covered Cumulative $

Employee Identifier Labor Category Hours Billed Burdened Cost** Hours Billed Burdened Costs*

Off-site On-site*

TOTAL $ $

*On-site work is work performed at a Government installation. Off-site work is work performed at the contractor’s facility.

**The contractor shall make unburdened rate information available upon request. When requested, unburdened rate information shall not include indirect costs and shall reflect the actual rate paid.

Schedule B – MATERIAL

The contractor shall itemize material charges and shall include the invoice number, date, total amount, company, purchase order number, and description of the item. The contractor shall make a copy of the paid invoice available upon request.

Schedule C – TRAVEL

The contractor shall itemize travel charges and shall include the dates of travel, names of individuals traveling, destination, purpose, and total cost. The contractor shall make a copy of the travel voucher available upon request.

The contractor need not submit copies of back-up receipts, but should retain them, as they are subject to review, upon request.

Schedule D - OTHER DIRECT CHARGES

The contractor shall itemize other direct charges at the task order level. Copies of invoices shall be available upon request. Subcontractor invoices shall be in the same format and require the same detail.

Schedule E - INDIRECT CHARGES

Indirect charges include those charges based upon a rate that is subject to verification by DCAA at contract closeout.

Schedule F – ADJUSTMENTS

The contractor shall show current fiscal year invoice adjustments in this section along with the justification. The contractor shall invoice adjustments that pertain to prior fiscal years separately.

Schedule G – OUTSTANDING COMMITMENTS

The contractor shall show any authorized expenditure that remains unpaid that the Government will reimburse pending the receipt of a supplier invoice or travel claim in this section.

Invoices that require segregation by CLIN can either have the CLINs itemized on each schedule or have each CLIN presented individually. The contractor shall not claim nor will the Navy pay for direct costs associated with preparation of an invoice.

Program management/support charges are limited to the first level supervisor. Program management hours above the supervisory level and other support hours not identified in the RFP must be explained in the proposal with a justification of the specific duties to be performed, and shall not be permitted without approval of the contracting officer.

4.3.1. Deliverable Products. Prepare and deliver the following at the task order level:

a. Segregation of cost and invoicing requirements (CDRL A036)

4.4. Progress Report. The contractor shall prepare monthly progress reports describing tasks performed each month at the task order level.

4.4.1. Deliverable Products. Prepare and deliver the following:

a. Progress Status Report (CDRL A035)

4.5.1. Deliverable Products. Contractor shall deliver the following:

a. Executed copies of the NDAs (CDRL A039)

5.0. OTHER DIRECT COSTS (ODCS)

5.1. Material [CLIN 0004]. The Contractor shall provide material or other items at the task order level, which are necessary or integral to the performance of tasking included in the SOW IAW Section H-2 clause Restriction on the

Direct Charging of Material.

5.1.1.