839CM3028_3030 Bid Dwg Culpeper Bk11.pdf

PDF 10 MB Posted Jul 23, 2020

Attached to: Y1PZ--NEW- IFB (FY-20) | CULPEPER NALT CEM | COLUMBARIUM, FACILITY RENOVATION, IMPROVEMENTS, REPAIRS & PRE-PLACED CRYPT | PROJECT NO. 839CM3028 & 839CM3030 SUBJECT TO AVAILABILITY OF FY-20 FUNDS. .. .
Solicitation number: 36C78620B0028
Issued by: Department of Veterans Affairs National Cemetery Administration

About this file

Written by GovTribe AI · Dec 27, 2023

This document provides details on a federal solicitation for construction services. The solicitation number is 36C78620B0028 and concerns renovations, improvements, repairs, and pre-placed crypts at the Culpeper National Cemetery in Culpeper, Virginia under project numbers 839CM3028 and 839CM3030, contingent upon availability of FY2020 funds. The work includes construction of a columbarium and facility renovations. Responses are due by the date specified in the solicitation. The award is expected to be issued by the Department of Veterans Affairs National Cemetery Administration.

View the file

Other files

File	Type	Posted
A0008 Culpeper Nalt Cem Revised Cost Schedule and SF 1442 Sec 17.pdf	PDF	Sep 8, 2020
A0007 Culpeper Nalt Cem (36C78620B0028).pdf	PDF	Sep 2, 2020
A0006 Culpeper Nalt Cem (36C78620B0028).pdf	PDF	Sep 1, 2020
A0005 for Prevailing Wage- Davis Bacon (36C78620B0028) Culpeper Nalt Cem.pdf	PDF	Sep 1, 2020
A0004 Drawings - Culpeper nalt Cem (36C78620B0028).pdf	PDF	Aug 27, 2020
A003 (For Posting-Culpeper Nalt Cem - 36C78620B0028).pdf	PDF	Aug 21, 2020
AO02 (For Posting-Virtual Bid Opening Info-Culpeper NC).pdf	PDF	Aug 21, 2020
A001 (For Posting-Culpeper Nalt Cem - 36C78620B0028).pdf	PDF	Aug 21, 2020
839CM3028_3030 Bid Dwg Culpeper Bk02.pdf	PDF	Jul 27, 2020
839CM3028_3030 Bid Dwg Culpeper Bk02.pdf	PDF	Jul 23, 2020
839CM3028_3030 Termite Report Culpeper.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk12.pdf	PDF	Jul 23, 2020
839CM3028_3030 Geotech Culpeper Bk B.pdf	PDF	Jul 23, 2020
36C78620B0028_1.docx	DOCX document	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk06.pdf	PDF	Jul 23, 2020
839CM3028-3030 Culpeper SOW Const Rev 1.pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk03.pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk07.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk10.pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk04.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk01.pdf	PDF	Jul 23, 2020
839CM3028_3030 Fuel Tank Closure Culpeper.pdf	PDF	Jul 23, 2020
839CM3028_3030 Haz Mat Surv Culpeper.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk07.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk06.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk05.pdf	PDF	Jul 23, 2020
839CM3028_3030 Geotech Culpeper Bk C.pdf	PDF	Jul 23, 2020
Wage Determination - Davis Bacon (Culpeper County VA ).pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk05.pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk01.pdf	PDF	Jul 23, 2020
IFB Contractor Cost Estimate Worksheet (Culpeper Nalt Cem).xlsx	XLSX spreadsheet	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk08.pdf	PDF	Jul 23, 2020
839CM3028_3030 SPECS Culpeper Bk02.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk03.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk02.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk04.pdf	PDF	Jul 23, 2020
839CM3028_3030 Lodge Struct Assessment Culpeper.pdf	PDF	Jul 23, 2020
839CM3028_3030 Bid Dwg Culpeper Bk09.pdf	PDF	Jul 23, 2020
839CM3028_3030 Geotech Culpeper Bk A.pdf	PDF	Jul 23, 2020

Show all 39

On GovTribe

Work with this file

Download the original file
Contacts named in this file
Similar government files
Ask GovTribe AI about this file

Try for free Login

Text version

The file's text, extracted by GovTribe without its formatting.

55.0 4.0 0.0 5.0

SCALE: 1/4"= 1'-0"

PLUMBING PLAN - ADMINISTRATION / LODGE

RH-4

60.0 MBH

PLAN NOTES:

F-1

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING,

CLEANING, SERVICING, MAINTENANCE, AND CALIBRATION, SHALL

BE EASILY AND SAFELY ACCESSIBLE BY PERSONS STANDING AT

FLOOR LEVEL, OR STANDING ON PERMANENT PLATFORMS,

WITHOUT THE USE OF PORTABLE LADDERS. EXAMPLES OF THESE

ITEMS INCLUDE, BUT ARE NOT LIMITED TO: ALL TYPES OF VALVES,

FILTERS AND STRAINERS, TRANSMITTERS, AND CONTROL DEVICES.

PRIOR TO COMMENCING INSTALLATION WORK, REFER CONFLICTS

BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO

COR FOR RESOLUTIONS.

GENERAL NOTES

1. PIPE 7/8"Ø LP GAS UP TO THE CEILING.

2. CONNECT EXISTING 1/2'' CW TO NEW INSTANTANEOUS WATER

HEATER, WH-1, UNDER SINK AS REQUIRED. SEE DETAIL A/PL001-AM.

3. INFRARED HEATER BY M.C.; LP GAS CONNECTIONS BY P.C.; TYPICAL

OF ALL.

4. 1ST STAGE REGULATOR, MOUNTED ON TANK.

5. 2ND STAGE REGULATOR, MOUNTED ON WALL.

6. PRE-MANUFACTURED PIPE SUPPORT; TYPICAL.

7. NEW 4" THICK PAD APPROXIMATELY 11'-0" X 4'-0", VERIFY SIZE.

8. INSTALL DIRT LEG AND SHUT OFF VALVE AT ALL GAS APPLIANCES;

TYPICAL.

9. DROP 7/8"Ø LP GAS DOWN.

70.0 MBH

3/4" LP

7/8" LP

1/2" COPPER LP

NEW ABOVE

GROUND 500

GALLON LP

TANK

7/8" LP

RH-3

60.0 MBH

RH-2

60.0 MBH

RH-1

60.0 MBH

7/8" LP

3/4" LP

1/2" LP

OPERATIONS

101 GENERAL OFFICE

DIRECTOR

WOMEN

MEN

CORRIDOR

VESTIBULE

CORRIDOR

HVAC

HAC

MAINTANENCE

STORAGE

PL-101-AM

PLUMBING PLAN - ADMINISTRATION/LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

ADMIN/MAINTENANCE

AutoCAD SHX Text

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text one quarter inch = one foot

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING, CLEANING, SERVICING,

MAINTENANCE, AND CALIBRATION, SHALL BE EASILY AND SAFELY ACCESSIBLE BY

PERSONS STANDING AT FLOOR LEVEL, OR STANDING ON PERMANENT PLATFORMS,

WITHOUT THE USE OF PORTABLE LADDERS. EXAMPLES OF THESE ITEMS INCLUDE, BUT

ARE NOT LIMITED TO: ALL TYPES OF VALVES, FILTERS AND STRAINERS, TRANSMITTERS,

AND CONTROL DEVICES. PRIOR TO COMMENCING INSTALLATION WORK, REFER

CONFLICTS BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO COR FOR

RESOLUTIONS.

GENERAL NOTES

FIELD VERIFY:

INFORMATION CONCERNING THE LOCATION(S) AND SIZES OF EXISTING MECHANICAL EQUIPMENT, ELECTRICAL EQUIPMENT, PIPING, PLUMBING AND DUCTWORK WAS OBTAINED FROM ORIGINAL

DESIGN DRAWINGS AND/OR CURSORY FIELD OBSERVATION, HOWEVER, ACTUAL "ASBUILT"

DRAWINGS WERE NOT AVAILABLE, CERTAIN INFORMATION CONCERNING THE LOCATION OF THE

EXISTING MECHANICAL EQUIPMENT, ELECTRICAL EQUIPMENT, PIPING, PLUMBING AND DUCTWORK HAS BEEN ASSUMED IN THIS DRAWING. THE EXACT LOCATION(S) AND DIRECTION OF FLOW OF ALL

EXISTING WORK IS UNKNOWN. REASONABLE EFFORT HAS BEEN MADE TO ACCURATELY DEPICT

THE EXISTING CONDITIONS, HOWEVER, ALL EXISTING WORK MUST BE VERIFIED IN THE FIELD TO

DETERMINE THE EXACT LOCATIONS, DIRECTIONS OF FLOW, DEPTH, SIZE, ETC.. PRIOR TO

STARTING CONSTRUCTION. ANY CONFLICT BETWEEN THESE PLANS AND ACTUAL FIELD

CONDITIONS SHALL BE REPORTED IMMEDIATELY TO THE ENGINEER FOR VERIFICATION AND/OR

CORRECTION.

GENERAL NOTES:

1. EVERYTHING SHOWN IS NEW UNLESS OTHERWISE NOTED.

2. FOR GENERAL DUCT CONSTRUCTION SEE THE LATEST VERSION OF SMACNA.

3. ALL WORK SHALL BE IN ACCORDANCE WITH THE BEST QUALITY STANDARDS OF THE TRADE, AND SHALL

CONFORM WITH ALL FEDERAL, STATE, AND LOCAL CODES AND STANDARDS.

4. CONTRACT DOCUMENTS CONSIST OF BOTH THE PROJECT MANUAL AND DRAWINGS, AND BOTH ARE INTENDED TO BE COMPLEMENTARY - ANYTHING APPEARING ON EITHER MUST BE EXECUTED THE SAME

AS IF SHOWN ON BOTH.

5. THE CONTRACTOR SHALL INCLUDE IN BID PROPOSAL ALL COSTS REQUIRED TO COMPLETELY AND PROPERLY INSTALL ALL WORK REQUIRED FOR THE PROJECT, AND SHALL EXAMINE THE SCOPE OF WORK

OF OTHER TRADES PRIOR TO SUBMITTING A BID PROPOSAL.

6. CONSTRUCTION DOCUMENTS SHALL BE FOLLOWED AS CLOSELY AS POSSIBLE, HOWEVER, SYSTEMS HAVE BEEN SHOWN DIAGRAMMATICALLY AND IN SOME CASES, ENLARGED FOR CLARITY. ANY OFFSETS, ADDITIONAL FITTINGS, AND/OR APPURTENANCES REQUIRED TO PROVIDE A COMPLETE AND

COORDINATED SYSTEM SHALL BE BORNE BY THE CONTRACTOR.

7. REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR EXACT LOCATION OF CEILING MOUNTED

MATERIALS INCLUDING ALL DIFFUSERS, GRILLES, AND REGISTERS.

8. THE M.C. SHALL COORDINATE DUCTWORK INSTALLATIONS WITH OTHER TRADES. LIGHTING AND DUCTWORK DESIGNS INDICATED ON CONTRACT DRAWINGS WERE COORDINATED, HOWEVER CONFLICTS WITH DUCTWORK AND LIGHTS MAY ARISE DUE TO GRID INSTALLATION. H.C. SHALL BE RESPONSIBLE FOR

ALL DUCTWORK MODIFICATIONS AND OFFSETS REQUIRED TO AVOID FIELD CONDITIONS.

9. BALANCE DAMPERS SHALL BE LOCATED AT BRANCH CONNECTION TO THE MAIN.

10. FLEXIBLE DUCTWORK IS LIMITED TO A MAXIMUM LENGTH OF 3 FEET, WITH NO DIPS, SAGS, OR TIGHT ELBOWS; AND ON SUPPLY DUCTWORK ONLY. FLEXIBLE DUCTWORK SHALL BE AN INSULATED, SEMI-RIGID AND LIGHT WEIGHT AIR DUCT, MANUFACTURED BY USING DEAD SOFT ALUMINUM STRIP WHICH IS SPIRALLY WOUND AND MECHANICALLY JOINED TOGETHER FORMING AN AIR TIGHT-LEAKPROOF TRIPLE LOCK SEAM. DUCT TO BE SELF-SUPPORTING AND CORROSIVE RESISTANT UL-181 CLASS I PRODUCT, WITH A POLYETHYLENE VAPOR BARRIER. FLEXIBLE DUCTWORK TO BE LIKE MASTERFIT UPC-018 (ACOUSTICAL)

OR AN APPROVED EQUAL.

11. LABEL ALL THERMOSTAT, SENSOR, ETC. AS TO WHAT THE DEVICE CONTROLS WITH AN ENLARGED, PLASTIC LABEL; MOUNTED UNDER OR ON THE DEVICE. WHITE LABEL, BLACK LETTERING.

12. PROVIDE NECK PLENUMS ON RETURN AND EXHAUST GRILLES AS REQUIRED. SEE DETAILS.

13. PROVIDE TURNING VANES IN ALL SQUARE ELBOWS.

14. ALL EQUIPMENT INCLUDING BUT NOT LIMITED TO DUCTWORK, PIPING, UNIT HEATERS, ETC. SHALL BE

HUNG FROM THE TOP CHORD OF THE STRUCTURAL STEEL OR SECURED TO WOOD STRUCTURE.

15. ALL EXTERIOR PENETRATIONS SHALL BE WEATHER AND WATER TIGHT.

16. REFRIGERANT PIPE SIZING AND CONFIGURATION BY UNIT MANUFACTURER.

17. CONTRACTORS ARE TO REVIEW STRUCTURAL PLANS AND ACTUAL LAYOUT OF BEAMS, JOISTS, ETC. TO AVOID CONFLICT BETWEEN DUCT. ADJUST DUCT ROUTING TO ACCEPT STRUCTURAL CONDITIONS.

18. CONTRACTOR SHALL VERIFY ELECTRICAL CHARACTERISTICS OF ALL MECHANICAL EQUIPMENT WITH THE

ELECTRICAL CONTRACTOR PRIOR TO PLACING EQUIPMENT ON ORDER.

19. WHERE WALL TYPE LOUVERS ARE INDICATED, MECHANICAL CONTRACTOR SHALL SEAL WATER-TIGHT ALL AROUND LOUVER WITH SILICON CAULKING. CONTRACTOR SHALL COORDINATE PAINTING REQUIREMENTS

FOR LOUVERS WITH GENERAL CONTRACTOR PRIOR TO SUBMITTING BID.

UNIT

HEAT

PUMP

SIGHT GLASS

FILTER/DRYER

COMBINATION CHARGING/

SHUT-OFF VALVE

REFRIGERANT SUCTION LINE

REFRIGERANT LIQUID LINE

COOLING

SECTION

FURNACE

NOTE: FOLLOW

MANUFACTURERS BEST

RECOMMENDATIONS FOR

PIPING CONFIGURATION,

ROUTING, AND SIZING.

MH-001-LG

NEW 6" CONCRETE

HOUSE KEEPING

PAD

NEW 4" CONCRETE

HOUSE KEEPING

PAD

MH-001-LG

MECHANICAL SCHEDULES - LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

LODGE

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text

REFRIGERANT PIPING DETAIL

AutoCAD SHX Text

EXTERIOR-WRAPPED INSULATION-

AutoCAD SHX Text

THERMOSTAT SENSOR

AutoCAD SHX Text

CONICAL TAP WITH DAMPER

AutoCAD SHX Text

SHOE TAP

AutoCAD SHX Text

DIFFUSER, GRILLE,

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

SUPPLY DIFFUSER, CEILING

AutoCAD SHX Text

RETURN, EXHAUST GRILLE, CEILING

AutoCAD SHX Text

TURNING VANES

AutoCAD SHX Text

LINED DUCT DIMENSIONS

AutoCAD SHX Text

SEE SPECIFICATIONS )

AutoCAD SHX Text

(INCLUDES LINING)

AutoCAD SHX Text

AIR EXTRACTOR

AutoCAD SHX Text

PIPE DOWN

AutoCAD SHX Text

PIPE UP

AutoCAD SHX Text

MANUAL DAMPER

AutoCAD SHX Text

FLEXIBLE CONNECTION

AutoCAD SHX Text 34"x 12"L

AutoCAD SHX Text T

AutoCAD SHX Text

TAG

AutoCAD SHX Text

CFM

AutoCAD SHX Text A

AutoCAD SHX Text

VERTICAL FIRE DAMPER

AutoCAD SHX Text

DUCT DIMENSIONS (WITH

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text 34"x 12"

AutoCAD SHX Text

DET80

AutoCAD SHX Text

HVAC - TYPICAL SYMBOLS

AutoCAD SHX Text

POINT OF WHERE DEMOLITION STOPS AND EXISTING IS TO REMAIN ON DEMO SHEETS

AutoCAD SHX Text

POINT OF CONNECTION BETWEEN NEW NEW AND EXISTING WORK ON REVISED SHEETS

AutoCAD SHX Text

%%UDUCT INSULATION SCHEDULE

AutoCAD SHX Text

FLUID TEMP. RANGE (%%DF)

AutoCAD SHX Text

SYSTEM

AutoCAD SHX Text

INTERIOR CONCEALED SUPPLY

AutoCAD SHX Text

40 & BELOW

AutoCAD SHX Text

EXTERIOR SUPPLY

AutoCAD SHX Text 100-300

AutoCAD SHX Text 40-75

AutoCAD SHX Text

INSULATION TYPE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

JACKET TYPE

AutoCAD SHX Text

VAPOR BARRIER REQ'D

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

%%UINSULATION TYPES

AutoCAD SHX Text

FLEXIBLE ELASTOMERIC

AutoCAD SHX Text

CELLULAR GLASS

AutoCAD SHX Text

MINERAL FIBER (FIBERGLASS)

AutoCAD SHX Text

POLYOLEFIN

AutoCAD SHX Text

CALCIUM SILICATE

AutoCAD SHX Text

CCF

AutoCAD SHX Text

CLOSED-CELL FOAM

AutoCAD SHX Text

FOIL & KRAFT PAPER

AutoCAD SHX Text

PVC

AutoCAD SHX Text

CELLULAR GLASS

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

STAINLESS STEEL

AutoCAD SHX Text

EXTERIOR RETURN

AutoCAD SHX Text

INSULATION THICKNESS (IN)

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

%%UJACKETTYPES

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

U P

MECHANICAL DEMOLITION BASEMENT PLAN - LODGE

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING, CLEANING,

SERVICING, MAINTENANCE, AND CALIBRATION, SHALL BE EASILY AND SAFELY

ACCESSIBLE BY PERSONS STANDING AT FLOOR LEVEL, OR STANDING ON

PERMANENT PLATFORMS, WITHOUT THE USE OF PORTABLE LADDERS.

EXAMPLES OF THESE ITEMS INCLUDE, BUT ARE NOT LIMITED TO: ALL TYPES OF

VALVES, FILTERS AND STRAINERS, TRANSMITTERS, AND CONTROL DEVICES.

PRIOR TO COMMENCING INSTALLATION WORK, REFER CONFLICTS BETWEEN

THIS REQUIREMENT AND CONTRACT DOCUMENTS TO COR FOR RESOLUTIONS.

GENERAL NOTES

REMOVE REFRIGERANT

LINES COMPLETE.

SCALE: 1/4"= 1'-0"

PLAN NOTES:

1. REMOVE PVC FLUE COMPLETE.

2. REMOVE AND REPLACE FLEX DUCT.

3. REMOVE FURNACE SUPPLY PLENUM AND EXISTING

REFRIGERANT LINES.

4. REMOVE RETURN DUCT UP TO FIRST FLOOR.

5. EXISTING DUCTWORK TO REMAIN.

6. DISCONNECT SUPPLY MAINS FROM PLENUM AS REQUIRED.

EX FURNACE

MAIN ROOM

BACK ROOM

UTILITY ROOM

MDH-101-LG

MECHANICAL DEMOLITION BASEMENT PLAN -

LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

LODGE

AutoCAD SHX Text

UNEXCAVATED

AutoCAD SHX Text

UNEXCAVATED

AutoCAD SHX Text

TRENCH

AutoCAD SHX Text

SUMP PIT

AutoCAD SHX Text

SINK

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text 1.

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

D O

W N

U P

D O

W N

EXISTING FLOOR

RETURN PLENUM AND

GRILLE

EXISTING THERMOSTAT

EXISTING FLOOR SUPPLY

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING, CLEANING,

SERVICING, MAINTENANCE, AND CALIBRATION, SHALL BE EASILY AND SAFELY

ACCESSIBLE BY PERSONS STANDING AT FLOOR LEVEL, OR STANDING ON

PERMANENT PLATFORMS, WITHOUT THE USE OF PORTABLE LADDERS.

EXAMPLES OF THESE ITEMS INCLUDE, BUT ARE NOT LIMITED TO: ALL TYPES

OF VALVES, FILTERS AND STRAINERS, TRANSMITTERS, AND CONTROL

DEVICES. PRIOR TO COMMENCING INSTALLATION WORK, REFER CONFLICTS

BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO COR FOR

RESOLUTIONS.

GENERAL NOTES

REMOVE CONDENSING

UNIT AND REFRIGERANT

LINES, COMPLETE.

PLAN NOTES:

1. PATCH HOLES IN WALL FROM REFRIGERANT PIPING DEMO AS

REQUIRED.

2. REMOVE PLENUM AND GRILLE. PREPARE OPENING IN FLOOR

FOR NEW GRILLE. SEE REVISED PLAN.

3. EXISTING FLOOR REGISTERS ARE TO BE REPLACED; TYPICAL

OF ALL. SEE REVISED PLAN.

4. REMOVE EXISTING THERMOSTAT. SEE REVISED PLAN.

SCALE: 1/4"= 1'-0"

MECHANICAL DEMOLITION FIRST FLOOR PLAN - LODGE

FOREMAN'S OFFICE

DINING ROOM

KITCHEN

CONFERENCE ROOM

MDH-102-LG

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030MECHANICAL DEMOLITION FIRST FLOOR PLAN -

LODGE

AutoCAD SHX Text

AutoCAD SHX Text 1.

AutoCAD SHX Text

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

W N

SCALE: 1/4"= 1'-0"

REMOVE EXISTING FAN

COIL UNIT AND ALL

REFRIGERANT LINES

SCHEMATIC DESIGN

NOV 6, 2019

19109

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING, CLEANING,

SERVICING, MAINTENANCE, AND CALIBRATION, SHALL BE EASILY AND

SAFELY ACCESSIBLE BY PERSONS STANDING AT FLOOR LEVEL, OR

STANDING ON PERMANENT PLATFORMS, WITHOUT THE USE OF PORTABLE

LADDERS. EXAMPLES OF THESE ITEMS INCLUDE, BUT ARE NOT LIMITED

TO: ALL TYPES OF VALVES, FILTERS AND STRAINERS, TRANSMITTERS, AND

CONTROL DEVICES. PRIOR TO COMMENCING INSTALLATION WORK, REFER

CONFLICTS BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS

TO COR FOR RESOLUTIONS.

GENERAL NOTES

MECHANICAL DEMOLITION SECOND FLOOR PLAN - LODGE

EX REFRIGERANT LINES

EX CONDENSATE DRAIN

TO REMAIN

PLAN NOTES:

1. REMOVE EXISTING THERMOSTAT.

2. EXISTING DUCTWORK TO REMAIN.

3. REMOVE EXISTING EXHAUST FAN.

4. REMOVE EXISTING ELECTRIC BASEBOARD RADIATOR.

BEDROOM

BATH

CLOSET

BEDROOM

MDH-103-LG

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030MECHANICAL DEMOLITION SECOND FLOOR PLAN

- LODGE

LODGE

AutoCAD SHX Text

FURN

AutoCAD SHX Text

CHIMNEY

AutoCAD SHX Text

7'-2 1/2" CLG

AutoCAD SHX Text

7'-2 1/2" CLG

AutoCAD SHX Text 1.

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

SCALE: 1/4"= 1'-0"

(2) SETS OF

REFRIGERANT LINES

KEEP TIGHT TO

CEILING/STRUCTURE

SEE FIRST FLOOR PLANS

FOR CONTINUATION.

REFRIGERANT PIPING UP

TO SECOND FLOOR,

ROUTE BEST WAY

(2) SETS OF

REFRIGERANT LINES

KEEP TIGHT TO

CEILING/STRUCTURE

CORE DRILL 4" HOLE

THOUGH WALL FOR

REFRIGERANT PIPING.

SEAL HOLE WEATHER

AND WATER TIGHT.

MECHANICAL REVISED BASEMENT PLAN - LODGE

PLAN NOTES:

1. CONDENSATE PUMP BASIS OF DESIGN: LITTLE GIANT 554401,

25 GPM @ 10 FT HD, 150 HP, 120V/1Ø; CONNECT PIPE 3 4"Ø PVC

COOLING CONDENSATE TO PUMP AS REQUIRED.

2. 3

4" PVC CONDENSATE PIPING; KEEP HIGH AS POSSIBLE.

3. DROP CONDENSATE PIPE DOWN WALL AND DISCHARGE INTO

SUMP PIT.

4. CONNECT NEW FURNACE TO EXISTING DUCTWORK AS

REQUIRED.

5. NEW FLEX DUCT RECONNECTED TO EXISTING SUPPLY MAIN

AND FLOOR REGISTER ON FIRST FLOOR.

6. NEW RETURN DUCT UP TO NEW RETURN GRILLE ON FIRST

FLOOR.

7. EXISTING DUCT TO REMAIN.

8. INSTALL NEW FURNACE ON A 4" CONCRETE PAD.

MAIN ROOM

BACK ROOM

UTILITY ROOM

MH-101-LG

MECHANICAL REVISED BASEMENT PLAN - LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

LODGE

AutoCAD SHX Text

UNEXCAVATED

AutoCAD SHX Text

UNEXCAVATED

AutoCAD SHX Text

TRENCH

AutoCAD SHX Text

SUMP PIT

AutoCAD SHX Text

SINK

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

FILLED IN

AutoCAD SHX Text

LF-1

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

W N

U P

D O

W N

D O

W N

SCALE: 1/4"= 1'-0"

MECHANICAL REVISED FIRST FLOOR PLAN - LODGE

IN BASEMENT,

SEE SHEET MH-101-LG

FOR CONTINUATION

NEW HEAT PUMP UNIT

FOR SECOND FLOOR

NEW HEAT PUMP UNIT

FOR FIRST FLOOR UNIT

IN BASEMENT

NEW REFRIGERANT

PIPING UP & DOWN

CONCEAL UP IN CHASE

SUPPORT REFRIGERATION PIPING OFF

GROUND AND INTO CRAWL SPACE;

TYPICAL ALL

PLAN NOTES:

1. NEW RETURN GRILLE IN FLOOR, BASIS OF DESIGN; CAST

ALUMINUM GRILLE BY PACIFIC REGISTER COMPANY, 24"X18".

2. NEW SUPPLY REGISTER LIKE BASIS OF DESIGN; VICTORIAN

CAST ALUMINUM REGISTER WITH DIRECTIONAL LOUVERS, BY

PACIFIC REGISTER COMPANY, 12"X4". VERIFY EXISTING SIZES.

3. NEW PROGRAMABLE THERMOSTAT. BASIS OF DESIGN WHITE

RODGERS 1F72-151

FOREMAN'S OFFICE

DINING ROOM

KITCHEN

CONFERENCE ROOM

MH-102-LG

MECHANICAL REVISED FIRST FLOOR PLAN -

LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

LODGE

AutoCAD SHX Text

LHP-2

AutoCAD SHX Text

LHP-1

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

W N

SCALE: 1/4"= 1'-0"

MECHANICAL REVISED SECOND FLOOR PLAN - LODGE

PLAN NOTES:

1. RECONNECT FAN COIL TO EXISTING CONDENSATE DRAIN.

2. NEW LF-2, CONNECT TO EXISTING DUCTWORK.

3. EXISTING THERMOSTAT; RECONNECT TO NEW FAN COIL.

4. INSTALL NEW EXHAUST FAN. BASIS OF DESIGN: HUNTER

SATURN MODEL 90053, 80 CFM, LED LIGHT BULBS, 120V.

5. NEW REFRIGERANT DOWN TO BASEMENT AND REPLACE WITH

NEW SPLIT SYSTEM HEAT PUMP. CONNECT TO EXISTING

DUCTWORK AS REQUIRED.

6. RAISE PIPING UP AND TIGHT TO CEILING.

BEDROOM

BATH

CLOSET

BEDROOM

MH-103-LG

MECHANICAL REVISED SECOND FLOOR PLAN -

LODGE

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

LODGE

AutoCAD SHX Text

FURN

AutoCAD SHX Text

CHIMNEY

AutoCAD SHX Text

7'-2 1/2" CLG

AutoCAD SHX Text

7'-2 1/2" CLG

AutoCAD SHX Text

LF-2

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

PHASE

FAN

MODEL NO.

MANUFACTURER

EXAMPLE

MARK VOLTS NOTESBTU/HR LENGTH

INLET

GAS

PRESS

MIN-MAX

INFRARED RADIANT HEATER SCHEDULE

NOTES:

1. Vent all Radiant Heaters through the roof.

2. Set Back Thermostat and Control System; see plans for location of thermostat.

3. Provide end caps.

4. All LP. Conform to ANSI/NFPA 88A and 88B. Flexible Gas Connector, Hanging Assembly, Vent Terminal.

5. All stainless steel construction.

MS-39

AMBI RAD ER15-S20 60,000 20'-0" 115/1 1.2 11" TO 7"WC ALL

RH-2 AMBI RAD ER15-S20 60,000 20'-0" 1.2 11" TO 7"WC ALL

RH-3 AMBI RAD ER15-S20 60,000 20'-0" 1.2 11" TO 7"WC ALL

115/1

FLA

RH-4 AMBI RAD ER15-S20 60,000 20'-0" 1.2 11" TO 7"WC ALL115/1

TAG E.S.P.CFM H.P.

WALL UNIT

VOLTAGE MODEL NO.

MANUFACTURER/SINGLE POINT POWER

MCA

TAG SEER

VOLTAGE

SINGLE POINT POWER

MCA MOCP MODEL NO.

MANUFACTURER/

NOTES

CONDENSING UNIT SCHEDULE

COIL KW

AUXILARY HEATING COIL

STAGES

HSPFCOOL

COOLING (MBH)

MOCP @ 95° F

HEATING (MBH)

MCU-1MC-1 399

TOTAL

MITSUBISHI MUY-GL12NA-U120.0 - 22.00 208/1Ø 20MITSUBISHI MSY-GL12NA-U1 15.0

NOTES

1. EQUALS BY; SAMSUNG, MITSUBISHI, SANYO, CARRIER.

2. MINI SPLIT, UNIT WITH R401A INVERTER COMPRESSOR; SINGLE POINT CONNECTION TO OUTDOOR UNIT, PROVIDE WALL MOUNTED WIRED CONTROLLER, OUTDOOR UNIT

BASE HEATER, WIND BAFFLE, AND DRAIN SOCKET. LOW AMBIENT CONTROLS.

MINI SPLIT DX SCHEDULE (BASIS OF DESIGN)

RH-1

MARKMARK

PHASE

FURNACE DATA

MANUFACTURER EFFICIENCYHEATING

OUTPUT

E.S.P.

"W.G.

O.A.

MIN.CFM FAN

HP VOLTS

NOM.

TONS

HEAT PUMP UNIT DATA

AMBIENT

TEMP.

REFRIG.

TYPE VOLTS PHASEMODEL NO.

EXAMPLE

MANUFACTURER

MODEL NO.

SPLIT SYSTEM HEATING AND COOLING EQUIPMENT SCHEDULE (BASIS OF DESIGN)

1. WITH AIR FILTER RACK, 2 STAGE PROGRAMMABLE THERMOSTAT; CONCENTRIC VENT KIT; LPG KIT.

MS-34

MF-1 60 MBH 96 1200 120 1/2 120 1 3 R-410A 208 LENNOX XP140362301

ROUND CHIMNEY TOP

NOT TO SCALE

AIR SPACE AROUND FLUE

GAS FLUE DETAIL

MANUFACTURER'S

RECOMMENDATIONS

NOTE

INSTALL PER

ADJUSTABLE ROOF

FLASHING

ROOF

STORM COLLAR

METALBESTOS FLUE

MCU-1

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING, CLEANING, SERVICING,

MAINTENANCE, AND CALIBRATION, SHALL BE EASILY AND SAFELY ACCESSIBLE BY

PERSONS STANDING AT FLOOR LEVEL, OR STANDING ON PERMANENT PLATFORMS,

WITHOUT THE USE OF PORTABLE LADDERS. EXAMPLES OF THESE ITEMS INCLUDE, BUT

ARE NOT LIMITED TO: ALL TYPES OF VALVES, FILTERS AND STRAINERS, TRANSMITTERS,

AND CONTROL DEVICES. PRIOR TO COMMENCING INSTALLATION WORK, REFER

CONFLICTS BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO COR FOR

RESOLUTIONS.

GENERAL NOTES

FIELD VERIFY:

INFORMATION CONCERNING THE LOCATION(S) AND SIZES OF EXISTING MECHANICAL EQUIPMENT, ELECTRICAL EQUIPMENT, PIPING, PLUMBING AND DUCTWORK WAS OBTAINED FROM ORIGINAL DESIGN DRAWINGS AND/OR CURSORY FIELD OBSERVATION, HOWEVER, ACTUAL "ASBUILT" DRAWINGS WERE NOT AVAILABLE, CERTAIN INFORMATION CONCERNING THE LOCATION OF THE EXISTING MECHANICAL EQUIPMENT, ELECTRICAL EQUIPMENT, PIPING, PLUMBING AND DUCTWORK HAS BEEN ASSUMED IN THIS DRAWING. THE EXACT LOCATION(S) AND DIRECTION OF FLOW OF ALL EXISTING WORK IS UNKNOWN.

REASONABLE EFFORT HAS BEEN MADE TO ACCURATELY DEPICT THE EXISTING CONDITIONS, HOWEVER, ALL EXISTING WORK MUST BE VERIFIED IN THE FIELD TO DETERMINE THE EXACT LOCATIONS, DIRECTIONS OF FLOW, DEPTH, SIZE, ETC.. PRIOR TO STARTING CONSTRUCTION. ANY CONFLICT BETWEEN THESE PLANS AND ACTUAL FIELD CONDITIONS SHALL BE REPORTED IMMEDIATELY TO THE ENGINEER FOR VERIFICATION

AND/OR CORRECTION.

GENERAL NOTES:

1. EVERYTHING SHOWN IS NEW UNLESS OTHERWISE NOTED.

2. ALL WORK SHALL BE IN ACCORDANCE WITH THE BEST QUALITY STANDARDS OF THE TRADE, AND SHALL

CONFORM WITH ALL FEDERAL, STATE, AND LOCAL CODES AND STANDARDS.

3. CONTRACT DOCUMENTS CONSIST OF BOTH THE PROJECT MANUAL AND DRAWINGS, AND BOTH ARE INTENDED TO BE COMPLEMENTARY - ANYTHING APPEARING ON EITHER MUST BE EXECUTED THE SAME

AS IF SHOWN ON BOTH.

4. THE CONTRACTOR SHALL INCLUDE IN BID PROPOSAL ALL COSTS REQUIRED TO COMPLETELY AND PROPERLY INSTALL ALL WORK REQUIRED FOR THE PROJECT, AND SHALL EXAMINE THE SCOPE OF

WORK OF OTHER TRADES PRIOR TO SUBMITTING A BID PROPOSAL.

5. CONSTRUCTION DOCUMENTS SHALL BE FOLLOWED AS CLOSELY AS POSSIBLE, HOWEVER, SYSTEMS HAVE BEEN SHOWN DIAGRAMMATICALLY AND IN SOME CASES, ENLARGED FOR CLARITY. ANY OFFSETS, ADDITIONAL FITTINGS, AND/OR APPURTENANCES REQUIRED TO PROVIDE A COMPLETE AND

COORDINATED SYSTEM SHALL BE BORNE BY THE CONTRACTOR.

6. REFER TO ARCHITECTURAL REFLECTED CEILING PLANS FOR EXACT LOCATION OF CEILING MOUNTED

MATERIALS INCLUDING ALL DIFFUSERS, GRILLES, AND REGISTERS.

7. THE H.C. SHALL COORDINATE DUCTWORK INSTALLATIONS WITH OTHER TRADES. LIGHTING AND

DUCTWORK DESIGNS INDICATED ON CONTRACT DRAWINGS WERE COORDINATED, HOWEVER

CONFLICTS WITH DUCTWORK AND LIGHTS MAY ARISE DUE TO GRID INSTALLATION. H.C. SHALL BE

RESPONSIBLE FOR ALL DUCTWORK MODIFICATIONS AND OFFSETS REQUIRED TO AVOID FIELD

CONDITIONS.

8. BALANCE DAMPERS SHALL BE LOCATED AT BRANCH CONNECTION TO THE MAIN.

9. FLEXIBLE DUCTWORK IS LIMITED TO A MAXIMUM LENGTH OF 3 FEET, WITH NO DIPS, SAGS, OR TIGHT

ELBOWS; AND ON SUPPLY DUCTWORK ONLY. FLEXIBLE DUCTWORK SHALL BE AN INSULATED,

SEMI-RIGID AND LIGHT WEIGHT AIR DUCT, MANUFACTURED BY USING DEAD SOFT ALUMINUM STRIP

WHICH IS SPIRALLY WOUND AND MECHANICALLY JOINED TOGETHER FORMING AN AIR

TIGHT-LEAKPROOF TRIPLE LOCK SEAM. DUCT TO BE SELF-SUPPORTING AND CORROSIVE RESISTANT UL-181 CLASS I PRODUCT, WITH A POLYETHYLENE VAPOR BARRIER. FLEXIBLE DUCTWORK TO BE LIKE

MASTERFIT UPC-018 (ACOUSTICAL) OR AN APPROVED EQUAL.

10. LABEL ALL THERMOSTAT, SENSOR, ETC. AS TO WHAT THE DEVICE CONTROLS WITH AN ENLARGED, PLASTIC LABEL; MOUNTED UNDER OR ON THE DEVICE.

11. PROVIDE NECK PLENUMS ON RETURN AND EXHAUST GRILLES AS REQUIRED.

12. PROVIDE TURNING VANES IN ALL SQUARE ELBOWS.

13. ALL EQUIPMENT INCLUDING BUT NOT LIMITED TO DUCTWORK, PIPING, UNIT HEATERS, ETC. SHALL BE

HUNG FROM THE TOP CHORD OF THE STRUCTURAL STEEL.

14. ALL EXTERIOR PENETRATIONS SHALL BE WEATHER AND WATER TIGHT.

15. REFRIGERANT PIPE SIZING AND CONFIGURATION BY UNIT MANUFACTURER.

16. HVAC CONTRACTOR SHALL COORDINATE DUCT, DIFFUSERS, REGISTERS AND GRILLES WITH LIGHT

FIXTURE LOCATIONS.

17. CONTRACTORS ARE TO REVIEW STRUCTURAL PLANS AND ACTUAL LAYOUT OF BEAMS, JOISTS, ETC. TO AVOID CONFLICT BETWEEN DUCT. ADJUST DUCT ROUTING TO ACCEPT STRUCTURAL CONDITIONS.

18. CONTRACTOR SHALL VERIFY ELECTRICAL CHARACTERISTICS OF ALL MECHANICAL EQUIPMENT WITH

THE ELECTRICAL CONTRACTOR PRIOR TO PLACING EQUIPMENT ON ORDER.

19. WHERE WALL TYPE LOUVERS ARE INDICATED, MECHANICAL CONTRACTOR SHALL SEAL WATER-TIGHT

ALL AROUND LOUVER WITH SILICON CAULKING. CONTRACTOR SHALL COORDINATE PAINTING

REQUIREMENTS FOR LOUVERS WITH GENERAL CONTRACTOR PRIOR TO SUBMITTING BID.

LENNOX EL296UH

070XE 3613 0.5 95 ALL

MCA MOP

6.8 15

MCA MOP

18.7 30

MH-001-AM

MECHANICAL SCHEDULES - ADMINISTRATION

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

ADMIN/MAINTENANCE

AutoCAD SHX Text

ALL

AutoCAD SHX Text

NOTES

AutoCAD SHX Text

%%UNOTES:

AutoCAD SHX Text

DET39A

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text 1.

AutoCAD SHX Text

EXTERIOR-WRAPPED INSULATION-

AutoCAD SHX Text

THERMOSTAT SENSOR

AutoCAD SHX Text

CONICAL TAP WITH DAMPER

AutoCAD SHX Text

SHOE TAP

AutoCAD SHX Text

DIFFUSER, GRILLE,

AutoCAD SHX Text

THERMOSTAT

AutoCAD SHX Text

SUPPLY DIFFUSER, CEILING

AutoCAD SHX Text

RETURN, EXHAUST GRILLE, CEILING

AutoCAD SHX Text

TURNING VANES

AutoCAD SHX Text

LINED DUCT DIMENSIONS

AutoCAD SHX Text

SEE SPECIFICATIONS )

AutoCAD SHX Text

(INCLUDES LINING)

AutoCAD SHX Text

AIR EXTRACTOR

AutoCAD SHX Text

PIPE DOWN

AutoCAD SHX Text

PIPE UP

AutoCAD SHX Text

MANUAL DAMPER

AutoCAD SHX Text

FLEXIBLE CONNECTION

AutoCAD SHX Text 34"x 12"L

AutoCAD SHX Text T

AutoCAD SHX Text

TAG

AutoCAD SHX Text

CFM

AutoCAD SHX Text A

AutoCAD SHX Text

VERTICAL FIRE DAMPER

AutoCAD SHX Text

DUCT DIMENSIONS (WITH

AutoCAD SHX Text

NOT TO SCALE

AutoCAD SHX Text 34"x 12"

AutoCAD SHX Text

DET80

AutoCAD SHX Text

HVAC - TYPICAL SYMBOLS

AutoCAD SHX Text

POINT OF WHERE DEMOLITION STOPS AND EXISTING IS TO REMAIN ON DEMO SHEETS

AutoCAD SHX Text

POINT OF CONNECTION BETWEEN NEW NEW AND EXISTING WORK ON REVISED SHEETS

AutoCAD SHX Text

%%UDUCT INSULATION SCHEDULE

AutoCAD SHX Text

FLUID TEMP. RANGE (%%DF)

AutoCAD SHX Text

SYSTEM

AutoCAD SHX Text

INTERIOR CONCEALED SUPPLY

AutoCAD SHX Text

40 & BELOW

AutoCAD SHX Text

EXTERIOR SUPPLY

AutoCAD SHX Text 100-300

AutoCAD SHX Text 40-75

AutoCAD SHX Text

INSULATION TYPE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

MF OR FE

AutoCAD SHX Text

JACKET TYPE

AutoCAD SHX Text

VAPOR BARRIER REQ'D

AutoCAD SHX Text

%%UABBREVIATIONS

AutoCAD SHX Text

%%UINSULATION TYPES

AutoCAD SHX Text

FLEXIBLE ELASTOMERIC

AutoCAD SHX Text

CELLULAR GLASS

AutoCAD SHX Text

MINERAL FIBER (FIBERGLASS)

AutoCAD SHX Text

POLYOLEFIN

AutoCAD SHX Text

CALCIUM SILICATE

AutoCAD SHX Text

CCF

AutoCAD SHX Text

CLOSED-CELL FOAM

AutoCAD SHX Text

FOIL & KRAFT PAPER

AutoCAD SHX Text

PVC

AutoCAD SHX Text

CELLULAR GLASS

AutoCAD SHX Text

ALUMINUM

AutoCAD SHX Text

STAINLESS STEEL

AutoCAD SHX Text

EXTERIOR RETURN

AutoCAD SHX Text

INSULATION THICKNESS (IN)

AutoCAD SHX Text 2"

AutoCAD SHX Text 1-1/2"

AutoCAD SHX Text

%%UJACKETTYPES

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

55.04.00.05.0

MECHANICAL DEMOLITION PLAN - ADMINISTRATION / LODGE

PLAN NOTES:

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING,

CLEANING, SERVICING, MAINTENANCE, AND CALIBRATION, SHALL

BE EASILY AND SAFELY ACCESSIBLE BY PERSONS STANDING AT

FLOOR LEVEL, OR STANDING ON PERMANENT PLATFORMS,

WITHOUT THE USE OF PORTABLE LADDERS. EXAMPLES OF THESE

ITEMS INCLUDE, BUT ARE NOT LIMITED TO: ALL TYPES OF VALVES,

FILTERS AND STRAINERS, TRANSMITTERS, AND CONTROL DEVICES.

PRIOR TO COMMENCING INSTALLATION WORK, REFER CONFLICTS

BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO

COR FOR RESOLUTIONS.

GENERAL NOTES

1. DEMO EXISTING AIR UNIT, OIL PIPING, CONTROLS, AND

CONNECTING DUCTWORK.

2. CAP OUTSIDE AIR CONNECTION TO O.A. GRILLE.

3. REMOVE SUPPLY DUCT COMPLETE.

4. DISCONNECT EXISTING FURNACE FROM SUPPLY AND

RETURN DUCT, OIL PIPING, AND CONTROLS.

5. DEMO EXISTING CONDENSING UNIT AND ALL REFRIGERANT

PIPING.

6. SUPPLY AND RETURN DUCT TO REMAIN.

7. EXISTING EXHAUST DUCT, ETC. TO REMAIN.

SCALE: 1/4"= 1'-0"

DUCT

OPERATIONS

GENERAL OFFICE

DIRECTOR

104 WOMEN

MEN

CORRIDOR

VESTIBULE

CORRIDOR

HVAC

HAC

MAINTANENCE

STORAGE

MDH101-AM

MECHANICAL DEMOLITION PLAN -

ADMINISTRATION

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

ADMIN/MAINTENANCE

AutoCAD SHX Text

AutoCAD SHX Text 1.

AutoCAD SHX Text North

AutoCAD SHX Text

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text C

AutoCAD SHX Text D

AutoCAD SHX Text E

AutoCAD SHX Text F

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

55.0 4.0 0.0 5.0 RH-3

RH-4

RH-2

RH-1

SCALE: 1/4"= 1'-0"

LP GAS RADIANT

HEATER, TYPICAL

ALL ITEMS THAT REQUIRE ACCESS, SUCH AS FOR OPERATING,

CLEANING, SERVICING, MAINTENANCE, AND CALIBRATION, SHALL

BE EASILY AND SAFELY ACCESSIBLE BY PERSONS STANDING AT

FLOOR LEVEL, OR STANDING ON PERMANENT PLATFORMS,

WITHOUT THE USE OF PORTABLE LADDERS. EXAMPLES OF THESE

ITEMS INCLUDE, BUT ARE NOT LIMITED TO: ALL TYPES OF VALVES,

FILTERS AND STRAINERS, TRANSMITTERS, AND CONTROL DEVICES.

PRIOR TO COMMENCING INSTALLATION WORK, REFER CONFLICTS

BETWEEN THIS REQUIREMENT AND CONTRACT DOCUMENTS TO

COR FOR RESOLUTIONS.

EVERYTHING SHOWN IS NEW UNLESS NOTED OTHERWISE.

GENERAL NOTES

1. INSTALL MINI SPLIT SYSTEM ABOVE DOOR.

2. 6"Ø FLUE THROUGH ROOF. SEE DETAIL A/001.

3. REPLACE AIR HANDLER WITH NEW MF-1.

CONNECT TO EXISTING SUPPLY AND RETURN

DUCT WORK AS REQUIRED. INSTALL NEW 4"

CONCRETE PAD.

4. REPLACE EXISTING CONDENSING UNIT WITH

NEW MCU-1.

5. NEW 6" CONCRETE PAD.

6. REFRIGERANT PIPING.

7. SET BACK THERMOSTAT BASIS OF DESIGN:

SUNSTAR #43240500, LINE VOLTAGE.

THERMOSTAT MOUNTED ON INSULATED BASE.

8. SUPPORT REFRIGERANT PIPING OFF OF

GROUND AND ON WALL WITH PRE

MANUFACTURED SUPPORTS.

9. ROUTE CONDENSATE PIPING ACROSS WALL

AND DOWN TO SINK P-TRAP.

10. PIPE 3 4" CONDENSATE TO FLOOR DRAIN.

RECONNECT EXISTING THERMOSTAT TO F-1.

11. MOUNT MINI-SPLIT THERMOSTAT TO WALL,

NEAR LIGHT SWITCH.

12. NEW SETBACK THERMOSTAT, BASIS OF DESIGN

WHITE RODGERS 1F72-151.

PLAN NOTES:

MECHANICAL PLAN - ADMINISTRATION / LODGE

OPERATIONS

GENERAL OFFICE

DIRECTOR

WOMEN

MEN

CORRIDOR

VESTIBULE

CORRIDOR

HVAC

HAC

MAINTANENCE

STORAGE

MH-101-AM

MECHANICAL PLAN - ADMINISTRATION

Project Number

Building Number

Drawing Number

Project Title

Location: Culpeper National Cemetery 305 US Avenue, Culpeper, VA 22701

Issue Date Checked Drawn

Drawing Title

Approved:

VA FORM 08 - 6231

Fi le

P at h 6/

P M

BID DOCUMENTS

U.S. Department of Veterans Affairs

21 4 5 6 7 8 9 10

PhaseARCHITECT OF RECORD

ARCHITURA CORPORATION

9880 Westpoint Drive, Suite #400 Indianapolis, IN 46256-3384

PH: (317) 348-1000

POC: Michael Conly, AIA, NCARB, President

CONSULTANTS

321 4 5 6 7 8 9 10

839CM3028

Project Director

2020-05-22 DHRevisions: Date:

COLUMBARIAM, FACILITY RENOVATION AND

REPAIRS, AND PRE- PLACED CRYPTS

Office of Construction and Facilities Management

Civil/ Structural:

KCI Technologies, Inc.

1352 Marrows Road, Ste. 100 Newark, Delaware 19711

PH: 302.731.9176

POC: Tom deLorimier

Landscape Architect:

Pashek+MTR, Ltd.

619 E. Ohio St.

Pittsburgh, PA 15212

PH: 412-321-6362

POC: Kara Roggenkamp

Mechanical/Electrical/Plumbing:

Design-Aire Engineering, Inc.

2707 Rand Road Indianapolis, Indiana 46241

PH: 317.464.9090

POC: Dave Haun

Historical Preservation Consultants:

Historic Preservation Training Center 4801A Urbana Pike, Gambrill House Frederick, MD 21704-7307

PH:

POC:

Lic. No. 13101

EARL WADE BOULWARE

C O

M M

ONWEALTH O F VI RG

P R

F E SS I ON AL E NG I NE

839CM3030

ADMIN/MAINTENANCE

AutoCAD SHX Text

MC-…

This is the start of the file's text. The full file is on GovTribe.

File details come from the government source that posted it. Updated Jul 23, 2020.