80KSC022R0010 Attachments J Portfolio.pdf

For the best experience, open this PDF portfolio in

Acrobat X or Adobe Reader X, or later.

Get Adobe Reader Now!

http://www.adobe.com/go/reader

SMASS IV 80KSC022R0010

Kennedy Space Center

Safety and Mission Assurance Support Services IV

(SMASS IV)

Attachment J-11

List of Key Acronyms and Glossary

SMASS IV 80KSC022R0010 List of Key Acronyms and Glossary Attachment J-11

Acronyms

ACA Associate Contractor Agreement

ADL Applicable Documents List

AFSS Autonomous Flight Safety System

AFSPCMAN Air Force Space Command Mannual

AOP Annual Operating Plan

ATA Agency Technical Authority

BEQ Best Estimated Quantities

CAGE Commercial And Government Entity

CCSFS Cape Canaveral Space Force Station

CCP Commercial Crew Program

CESO Center Engineering, Safety, and Operations

CIL Critical Items List

CIO Chief Information Officer

CLIN Contract Line Item Number

CO Contracting Officer

COR Contracting Officer Representative

CUI Controlled Unclassified Information

CSWG Common Standards Working Group

DCMA Defense Contract Management Agency

DCSA Defense Counterintelligence Security Agency

DoD Department of Defense

DR Data Requirements

DRL Data Requirement List

DRD Data Requirements Descriptions

EEE Parts Electronic, Electrical, Electromechanical Parts

EFFS Enterprise File Sharing and Sync

EFTS Enhanced Flight Termination System

EGS Exploration Ground System

ELVIS Expendable Launch Vehicle Integrated Support eCC Electronic Country Clearance

EAR Export Administration Regulations

FAA Federal Aviation Administration

FAPIIS Federal Awardee Performance and Integrity Information System

FAR Federal Acquisition Regulation

FFPLOE Firm-Fixed Price, Level of Effort

FMEA Failure Modes and Effects Analysis

FMD Financial Management Division

FOD Foreign Object Debris

FP Fixed Price

FTS Flight Termination System

FY Fiscal Year

G&A General and Administrative

GAO Government Accountability Office

GFE Government Furnished Equipment

GFY Government Fiscal Year

GSE Ground Support Equipment

IA Independent Assessment

ISS International Space Station

IT Information Technology

ITAR International Traffic in Arms Regulations

JARSS Joint Advanced Range Safety System

KATS Kennedy Action Tracking System

KLXS II Kennedy Ground Systems Development and Operations Program Office Services Contract II

KNPR Kennedy NASA Procedural Requirements

KSC Kennedy Space Center

LOE Level of Effort

LSP Launch Services Program

LX Ground Systems Development and Operations Program Office

LV Launch Vehicle

MCWG Metrology and Calibration Working Group

MOA Memorandum of Agreement

MOU Memorandum of Understanding

NASA National Aeronautics and Space Administration

NFS NASA FAR Supplement

NPD NASA Policy Directive

NPR NASA Procedural Requirement

NSRS NASA Safety Reporting System

NSSC NASA Shared Services Center

ODC Other Direct Costs

OCI Organizational Conflict of Interest

OFI Opportunity for Improvement

OSHA Occupational Safety and Health Administration

OSMA Office of Safety and Mission Assurance

PDF Portable Document File

PSWG Payload Safety Working Group

PMO Program Management Office

POC Point of Contact

PRA Probabilistic Risk Assessment

PWS Performance Work Statement

QMS Quality Management System

RFP Request for Proposal

RCM Reliability-Centered Maintenance

RMO Resource Management Office

RRAT Range Risk Assessment Tool

SAA System Assurance Analysis

SACA Software Assurance and Classification Assessments

SAM System for Award Management

SEMO Supply and Equipment Management Officer

SEWP Solutions for Enterprise-Wide Procurement

SLD 45 Space Launch Delta 45

SLS Space Launch System

SMA/S&MA Safety and Mission Assurance

SSMT Self Service Management Tool

TAT Threat Assessment Team

TCP Total Compenstaion Plan

TOSC Test and Operations Support Contract

UAS Unmanned Aircraft Systems

US United States

V&V Verification and Validation

WBS Work Breakdown Structure

WFF Wallops Flight Facility

WYE Work Year Equivalent

Glossary

Term/Phrase Description Acceptance The act of an authorized representative of the Government by which the Government, for itself or as an agent of another, assumes ownership of existing identified supplies tendered or approves specific services rendered as partial or complete performance of the contract.

Ad Hoc Reporting An unplanned, customized, real-time data inquiry Appropriation A provision of law authorizing the expenditure of funds for a given purpose, usually, but not always, in an appropriations act. It is designated by the Treasury Appropriation Fund Symbol (TAFS).

Associate Contractor Agreement

A documented mutual understanding between two or more contractors that enables support from one to the other or working together to meet a common objective and requiring no Government involvement.

Base LOE Hours The LOE hours for all contract years that are established in the RFP and intended to be awarded at Contract Start.

Certification The formal written act whereby a responsible official attests to the satisfactory accomplishment of specified activities and authorizes the affected hardware/software, procedures, facilities, and/or personnel for specified usage.

Close Call A mishap resulting in no personal injury or illness, personal injury or illness requiring only first aid, and/or minor damage (of less than $20,000) but has NASA mishap potential. Reference NPR 8621.1

Compliance The act or process of satisfying requirements.

Configuration Control

A systematic change process for proposing, justifying, evaluating, coordinating, disposing, and implementing proposed baseline changes.

Contractor The term “Contractor” as used herein refers to both the prime Safety and Mission Assurance IV (SMASS IV) Contractor and any SMASS IV subcontractors.

Contracting Officer

(CO)

The individual appointed by the contracting activity for procuring and/or administering a contract. The CO is the only person authorized to direct contractor performance, execute amendments to the contract, and contractually obligate the Government.

Contracting Officer’s Representative

(COR)

A Government official who has been appointed by the CO who has the responsibility in managing the technical aspects of the contract and monitor the contractor’s technical performance and delivery of the final products and/or services. Pursuant to NFS 1842.270, the COR is not authorized to initiate procurement actions or in any way cause a change to the contract or increase the Government's financial obligations. The CO is the only Government official authorized to direct contractor performance, execute modifications to the contract, and contractually obligate the Government.

Critical Item List A listing comprised of critical items identified as a result of performing the Failure Modes and Effects Analysis.

Critical Skills A specific ability that is required for the safe and effective execution or performance of a unique task, requiring specialized training and certification.

Data Requirements Description (DRD)

A detailed description of a required data item including purpose, content, format, references, maintenance requirements, submittal requirements, and other pertinent information.

Eastern Range The Eastern Range is an area in and over which rockets are fired for testing and tracking. Cape Canaveral serves as the range’s space processing and launch area, and the Air Force controls the range for all eastern-bound launches. The range starts at the launch pads at Cape Canaveral Space Force Station and Kennedy Space Center (KSC) and extends eastward over the Atlantic Ocean and into the Indian Ocean.

External Customer An outside organization or individual that receives a product or service.

Failure Modes and Effects Analysis

The analysis of the potential failure modes in a system to determine effects on system operation, personnel safety, and flight hardware; and to classify each failure mode according to severity.

Fiscal Year (FY) The US Government accounting year for appropriations which is the 12-month period starting October 1st and ending September 30th.

Flex LOE Hours The LOE hours for all contract years that may be added (up to a maximum) during contract implementation.

Foreign Object Debris/Damage

Debris is a substance or article alien to a vehicle or system, which could potentially cause damage; Damage is any impairment attributed to a foreign object which may degrade the product's required safety and/or performance characteristics.

Ground Support Equipment (GSE)

Non-flight equipment, systems, or devices specifically designed and developed for a direct physical or functional interface with flight hardware.

High Visibility Close Calls

Those particular mishaps or close calls, regardless of the amount of property damage or personnel injury, that the senior NASA management judges to possess a high degree of programmatic impact or public, media, or political interest including, but not limited to, mishaps and close calls that impact flight hardware, flight software, or completion of critical mission milestones.

“in accordance with” The contractor shall comply with all aspects (requirements, guidelines, specifications, etc.) of the associated compliance document.

Maintainability The measure of the ability of an item to be retained in, or restored to, a specified condition when maintenance is performed. A design and operating characteristic that permits hardware to be serviced, inspected, and repaired with a minimum expenditure of maintenance resources.

Mishap An unplanned event involving (or potentially involving) injury or death to personnel, damage to or loss of property, or mission failure; fully defined in NPR 8621.1.

Mission The performance of a coherent set of operations to achieve program goals.

Mission Assurance Activities or the performance of activities which provide increased confidence that the requirements, processes, and standards for a mission are being fulfilled.

Nonconformance A condition of any article, item, part, supplies, product, material or service in which one or more characteristics do not conform to requirements specified in the contract, drawings, specifications or other approved product description. Includes failures, discrepancies, defects and malfunctions.

Orion NASA's Multi-Purpose Crew Vehicle designation.

Performance Work Statement (PWS)

The description of tasks or services to be performed and end products to be delivered by the Contractor. The PWS also defines facilities, property, and support to be provided to the Contractor by the Government.

Phase-In Period of time from contract award date to contract effective start date.

Pressure System An assembly of components under pressure, including vessels, piping, valves, pumps, relief devices, expansion joints, and gauges.

Pressure Vessel Any vessel used for storage or handling of gas or liquid under positive pressure, including components of systems.

Program A strategic investment by a Mission Directorate or Mission Support

Office that has a defined architecture, technical approach, requirements, funding level, and a management structure that initiates and directs one or more projects. A program defines a strategic direction that the Agency has identified as critical

Project A specific investment identified in a Program Plan having defined requirements, a life cycle cost, a beginning, and an end. A project yields new or revised products and services that directly address NASA's strategic needs. A project also has a management structure and may have interfaces to other projects, agencies, and international partners.

Reach Back The capability to identify, acquire, and deliver a resource (skill set) from within the corporation’s workforce in order to accomplish a short or long-term support service for the SMASS IV contract.

Reference Provided for background or information.

Reliability The probability that an item, system, subsystem, component, or part will perform the intended and required function under specified conditions at a designated time for a specified interval.

Risk The combination of the probability that a program or project will experience an undesired event (some examples include a cost overrun, schedule slippage, malicious activities, environmental impact, failure to achieve a needed technological breakthrough or project success criteria) and the consequences, impact, or severity of the undesired event, were it to occur. Both the probability and consequences may have associated uncertainties.

Risk Assessment An evaluation of a risk item that determines (1) what can go wrong, (2) how likely is it to occur, and (3) what the consequences are.

Risk Management An organized, systematic decision-making process that efficiently identifies, analyzes, plans, tracks, controls, communicates, and documents risk to increase the likelihood of achieving program/project goals.

Risk Review Board Formally established groups of people assigned specifically to review risk information. Their output is two fold: (1) to improve the management of risk in the area being reviewed and (2) to serve as an input to decision-making bodies in need of risk information.

Rough Order of Magnitude

A high-level preliminary cost estimate for a project or task.

Safety and Mission Assurance

Referred to as “SMA” or “S&MA”

SMA: Used when referring to Safety and Mission Assurance at the Agency or Center level as an organizational body or entity.

S&MA: Used when referring to a specific disciplines within Safety and Mission Assurance (Safety Engineering, Quality Assurance, etc.).

Sensitive Information

Unclassified information that requires protection due to the risk and magnitude of loss or harm that could result from the inadvertent or deliberate disclosure, alteration, or destruction of information. This includes information for which improper use or disclosure could adversely affect the ability of an agency to accomplish its mission, proprietary information, records about individuals requiring protection under the Privacy Act, and information not releasable under the Freedom of Information Act. This is not the same as the National Security Agency (NSA) term “Sensitive, But Unclassified Information.”

System Assurance Analysis

A documented, integrated reliability and safety analysis that combines criticality assessment, Failure Modes and Effects Analysis, Single Failure Point Analysis, Critical Items List, and Hazard Analysis.

Teaming Arrangement

See FAR 9.601. Two or more companies form a partnership or joint venture to act as a prime contractor (offeror) and/or a prime contractor (offeror) agrees with one or more other companies to have them act as its subcontractors.

Validation The process of providing the objective evidence that a subsystem, system, or end item satisfies its intended use when placed in its intended environment.

Verification The process of providing the objective evidence that a subsystem, system, or end item satisfies the design requirements and specifications.

Work Breakdown Structure (WBS)

A product-oriented hierarchical division of the hardware, software, services, and data required to produce the Program/project's end product(s), structured according to the way the work will be performed, and reflective of the way in which Program/project costs, schedule, technical, and risk data are to be accumulated, summarized, and reported.

Work Year Equivalent (WYE)

The total productive labor hours in a year that a full time contractor employee could be expected to be available for work, excluding non-productive time (e.g., holidays and leave).

Attachment J-12

Register of Wage Determination Under U.S. Department of Labor

SMASS IV 80KSC022R0010 Wage Determination Attachment J-12 https://sam.gov/wage-determination/2015-4555/16

"REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT |EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

|Wage Determination No.: 2015-4555 Daniel W. Simms Division of | Revision No.: 16 Director Wage Determinations|Date Of Last Revision: 03/15/2022

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

If the contract is entered into on or after January 30 2022 or the contract is renewed or extended (e.g. an option is exercised) on or after January 30 2022:

With certain exceptions Executive Order 14026 applies to the contract.

The contractor must pay all covered workers at least $15.00 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in 2022.

If the contract was awarded on or between January 1 2015 and January 29 2022 and the contract is not renewed or extended on or after January 30 2022:

With certain exceptions Executive Order 13658 applies to the contract.

The contractor must pay all covered workers at least $11.25 per hour (or the applicable wage rate listed on this wage determination if it is higher) for all hours spent performing on the contract in 2022.

The applicable Executive Order minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the Executive Orders is available at https://www.dol.gov/agencies/whd/government-contracts.

State: Florida

Area: Florida County of Brevard

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 14.56*** 01012 - Accounting Clerk II 16.34 01013 - Accounting Clerk III 18.43 01020 - Administrative Assistant 23.96

01035 - Court Reporter 18.78 01041 - Customer Service Representative I 12.47*** 01042 - Customer Service Representative II 14.03*** 01043 - Customer Service Representative III 15.30 01051 - Data Entry Operator I 14.84*** 01052 - Data Entry Operator II 16.19 01060 - Dispatcher Motor Vehicle 17.03 01070 - Document Preparation Clerk 15.88 01090 - Duplicating Machine Operator 15.88 01111 - General Clerk I 13.46*** 01112 - General Clerk II 14.69*** 01113 - General Clerk III 16.50 01120 - Housing Referral Assistant 20.93 01141 - Messenger Courier 14.73*** 01191 - Order Clerk I 13.57*** 01192 - Order Clerk II 14.81*** 01261 - Personnel Assistant (Employment) I 16.80 01262 - Personnel Assistant (Employment) II 18.78 01263 - Personnel Assistant (Employment) III 20.93 01270 - Production Control Clerk 21.82 01290 - Rental Clerk 13.59*** 01300 - Scheduler Maintenance 16.80 01311 - Secretary I 16.80 01312 - Secretary II 18.78 01313 - Secretary III 20.93 01320 - Service Order Dispatcher 15.22 01410 - Supply Technician 23.96 01420 - Survey Worker 16.31 01460 - Switchboard Operator/Receptionist 13.91*** 01531 - Travel Clerk I 14.29*** 01532 - Travel Clerk II 15.40 01533 - Travel Clerk III 16.53 01611 - Word Processor I 14.95*** 01612 - Word Processor II 16.80 01613 - Word Processor III 18.78 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer Fiberglass 23.65 05010 - Automotive Electrician 18.15 05040 - Automotive Glass Installer 17.17 05070 - Automotive Worker 17.17 05110 - Mobile Equipment Servicer 15.50 05130 - Motor Equipment Metal Mechanic 18.88 05160 - Motor Equipment Metal Worker 17.17 05190 - Motor Vehicle Mechanic 18.80 05220 - Motor Vehicle Mechanic Helper 14.58*** 05250 - Motor Vehicle Upholstery Worker 16.58 05280 - Motor Vehicle Wrecker 17.17 05310 - Painter Automotive 18.04 05340 - Radiator Repair Specialist 17.17 05370 - Tire Repairer 14.53*** 05400 - Transmission Repair Specialist 18.88 07000 - Food Preparation And Service Occupations 07010 - Baker 12.36*** 07041 - Cook I 12.80***

07042 - Cook II 14.73*** 07070 - Dishwasher 10.18*** 07130 - Food Service Worker 11.07*** 07210 - Meat Cutter 17.35 07260 - Waiter/Waitress 10.76*** 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 20.74 09040 - Furniture Handler 13.01*** 09080 - Furniture Refinisher 18.39 09090 - Furniture Refinisher Helper 13.94*** 09110 - Furniture Repairer Minor 16.18 09130 - Upholsterer 18.39 11000 - General Services And Support Occupations 11030 - Cleaner Vehicles 12.15*** 11060 - Elevator Operator 11.95*** 11090 - Gardener 16.65 11122 - Housekeeping Aide 11.95*** 11150 - Janitor 11.95*** 11210 - Laborer Grounds Maintenance 13.02*** 11240 - Maid or Houseman 11.56*** 11260 - Pruner 11.84*** 11270 - Tractor Operator 15.44 11330 - Trail Maintenance Worker 13.02*** 11360 - Window Cleaner 13.17*** 12000 - Health Occupations 12010 - Ambulance Driver 22.72 12011 - Breath Alcohol Technician 19.10 12012 - Certified Occupational Therapist Assistant 35.44 12015 - Certified Physical Therapist Assistant 32.31 12020 - Dental Assistant 19.11 12025 - Dental Hygienist 34.50 12030 - EKG Technician 20.02 12035 - Electroneurodiagnostic Technologist 20.02 12040 - Emergency Medical Technician 22.72 12071 - Licensed Practical Nurse I 17.08 12072 - Licensed Practical Nurse II 19.10 12073 - Licensed Practical Nurse III 21.29 12100 - Medical Assistant 15.00 12130 - Medical Laboratory Technician 24.85 12160 - Medical Record Clerk 16.36 12190 - Medical Record Technician 18.29 12195 - Medical Transcriptionist 17.43 12210 - Nuclear Medicine Technologist 35.15 12221 - Nursing Assistant I 11.76*** 12222 - Nursing Assistant II 13.22*** 12223 - Nursing Assistant III 14.42*** 12224 - Nursing Assistant IV 16.19 12235 - Optical Dispenser 24.22 12236 - Optical Technician 18.41 12250 - Pharmacy Technician 16.60 12280 - Phlebotomist 16.07 12305 - Radiologic Technologist 27.80 12311 - Registered Nurse I 22.67 12312 - Registered Nurse II 27.73

12313 - Registered Nurse II Specialist 27.73 12314 - Registered Nurse III 33.55 12315 - Registered Nurse III Anesthetist 33.55 12316 - Registered Nurse IV 40.22 12317 - Scheduler (Drug and Alcohol Testing) 27.59 12320 - Substance Abuse Treatment Counselor 19.59 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 17.52 13012 - Exhibits Specialist II 20.85 13013 - Exhibits Specialist III 25.49 13041 - Illustrator I 16.82 13042 - Illustrator II 20.84 13043 - Illustrator III 25.49 13047 - Librarian 23.08 13050 - Library Aide/Clerk 13.23*** 13054 - Library Information Technology Systems 20.85 Administrator 13058 - Library Technician 17.68 13061 - Media Specialist I 15.05 13062 - Media Specialist II 16.82 13063 - Media Specialist III 18.75 13071 - Photographer I 16.54 13072 - Photographer II 18.51 13073 - Photographer III 22.92 13074 - Photographer IV 28.05 13075 - Photographer V 33.55 13090 - Technical Order Library Clerk 16.62 13110 - Video Teleconference Technician 15.74 14000 - Information Technology Occupations 14041 - Computer Operator I 16.35 14042 - Computer Operator II 18.30 14043 - Computer Operator III 20.40 14044 - Computer Operator IV 22.66 14045 - Computer Operator V 25.10 14071 - Computer Programmer I (see 1) 23.18 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 16.35 14160 - Personal Computer Support Technician 22.66 14170 - System Support Specialist 26.75 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 29.98 15020 - Aircrew Training Devices Instructor (Rated) 34.10 15030 - Air Crew Training Devices Instructor (Pilot) 40.86 15050 - Computer Based Training Specialist / Instructor 29.98 15060 - Educational Technologist 30.86 15070 - Flight Instructor (Pilot) 40.86 15080 - Graphic Artist 20.58 15085 - Maintenance Test Pilot Fixed Jet/Prop 40.86 15086 - Maintenance Test Pilot Rotary Wing 40.86

15088 - Non-Maintenance Test/Co-Pilot 40.86 15090 - Technical Instructor 23.85 15095 - Technical Instructor/Course Developer 29.16 15110 - Test Proctor 19.25 15120 - Tutor 19.25 16000 - Laundry Dry-Cleaning Pressing And Related Occupations 16010 - Assembler 10.02*** 16030 - Counter Attendant 10.02*** 16040 - Dry Cleaner 12.26*** 16070 - Finisher Flatwork Machine 10.02*** 16090 - Presser Hand 10.02*** 16110 - Presser Machine Drycleaning 10.02*** 16130 - Presser Machine Shirts 10.02*** 16160 - Presser Machine Wearing Apparel Laundry 10.02*** 16190 - Sewing Machine Operator 13.05*** 16220 - Tailor 13.89*** 16250 - Washer Machine 10.64*** 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 23.41 19040 - Tool And Die Maker 28.92 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 17.66 21030 - Material Coordinator 21.82 21040 - Material Expediter 21.82 21050 - Material Handling Laborer 13.48*** 21071 - Order Filler 12.88*** 21080 - Production Line Worker (Food Processing) 17.66 21110 - Shipping Packer 14.81*** 21130 - Shipping/Receiving Clerk 14.81*** 21140 - Store Worker I 13.62*** 21150 - Stock Clerk 18.22 21210 - Tools And Parts Attendant 17.66 21410 - Warehouse Specialist 17.66 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 29.88 23019 - Aircraft Logs and Records Technician 23.44 23021 - Aircraft Mechanic I 28.27 23022 - Aircraft Mechanic II 29.88 23023 - Aircraft Mechanic III 31.48 23040 - Aircraft Mechanic Helper 20.19 23050 - Aircraft Painter 26.63 23060 - Aircraft Servicer 23.44 23070 - Aircraft Survival Flight Equipment Technician 26.63 23080 - Aircraft Worker 25.04 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.04 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 28.27

II

23110 - Appliance Mechanic 20.94 23120 - Bicycle Repairer 17.11 23125 - Cable Splicer 29.99 23130 - Carpenter Maintenance 19.03 23140 - Carpet Layer 19.69 23160 - Electrician Maintenance 26.74

23181 - Electronics Technician Maintenance I 28.26 23182 - Electronics Technician Maintenance II 30.06 23183 - Electronics Technician Maintenance III 31.91 23260 - Fabric Worker 18.42 23290 - Fire Alarm System Mechanic 19.24 23310 - Fire Extinguisher Repairer 17.11 23311 - Fuel Distribution System Mechanic 22.22 23312 - Fuel Distribution System Operator 17.11 23370 - General Maintenance Worker 17.61 23380 - Ground Support Equipment Mechanic 28.27 23381 - Ground Support Equipment Servicer 23.44 23382 - Ground Support Equipment Worker 25.04 23391 - Gunsmith I 17.56 23392 - Gunsmith II 20.20 23393 - Gunsmith III 22.75 23410 - Heating Ventilation And Air-Conditioning 21.12 Mechanic 23411 - Heating Ventilation And Air Conditioning 22.33 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 25.53 23440 - Heavy Equipment Operator 18.16 23460 - Instrument Mechanic 22.22 23465 - Laboratory/Shelter Mechanic 20.94 23470 - Laborer 13.48*** 23510 - Locksmith 20.94 23530 - Machinery Maintenance Mechanic 23.76 23550 - Machinist Maintenance 20.27 23580 - Maintenance Trades Helper 15.53 23591 - Metrology Technician I 22.22 23592 - Metrology Technician II 23.50 23593 - Metrology Technician III 24.75 23640 - Millwright 22.22 23710 - Office Appliance Repairer 18.22 23760 - Painter Maintenance 18.46 23790 - Pipefitter Maintenance 24.60 23810 - Plumber Maintenance 23.18 23820 - Pneudraulic Systems Mechanic 22.22 23850 - Rigger 22.22 23870 - Scale Mechanic 19.69 23890 - Sheet-Metal Worker Maintenance 23.00 23910 - Small Engine Mechanic 17.41 23931 - Telecommunications Mechanic I 24.15 23932 - Telecommunications Mechanic II 25.23 23950 - Telephone Lineman 22.22 23960 - Welder Combination Maintenance 18.80 23965 - Well Driller 20.92 23970 - Woodcraft Worker 22.22 23980 - Woodworker 17.11 24000 - Personal Needs Occupations 24550 - Case Manager 18.09 24570 - Child Care Attendant 11.62*** 24580 - Child Care Center Clerk 14.48*** 24610 - Chore Aide 11.41*** 24620 - Family Readiness And Support Services 18.09

Coordinator 24630 - Homemaker 18.09 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 22.22 25040 - Sewage Plant Operator 21.25 25070 - Stationary Engineer 22.22 25190 - Ventilation Equipment Tender 15.87 25210 - Water Treatment Plant Operator 21.25 27000 - Protective Service Occupations 27004 - Alarm Monitor 18.70 27007 - Baggage Inspector 15.03 27008 - Corrections Officer 21.02 27010 - Court Security Officer 21.02 27030 - Detection Dog Handler 18.80 27040 - Detention Officer 21.02 27070 - Firefighter 21.14 27101 - Guard I 15.03 27102 - Guard II 18.80 27131 - Police Officer I 21.36 27132 - Police Officer II 23.74 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.12*** 28042 - Carnival Equipment Repairer 13.99*** 28043 - Carnival Worker 9.93*** 28210 - Gate Attendant/Gate Tender 16.78 28310 - Lifeguard 12.08*** 28350 - Park Attendant (Aide) 18.76 28510 - Recreation Aide/Health Facility Attendant 13.69*** 28515 - Recreation Specialist 23.25 28630 - Sports Official 14.94*** 28690 - Swimming Pool Operator 16.11 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 26.22 29020 - Hatch Tender 26.22 29030 - Line Handler 26.22 29041 - Stevedore I 24.92 29042 - Stevedore II 29.40 30000 - Technical Occupations 30010 - Air Traffic Control Specialist Center (HFO) (see 2) 40.55 30011 - Air Traffic Control Specialist Station (HFO) (see 2) 27.96 30012 - Air Traffic Control Specialist Terminal (HFO) (see 2) 30.80 30021 - Archeological Technician I 16.17 30022 - Archeological Technician II 18.10 30023 - Archeological Technician III 22.42 30030 - Cartographic Technician 22.42 30040 - Civil Engineering Technician 26.73 30051 - Cryogenic Technician I 25.61 30052 - Cryogenic Technician II 28.29 30061 - Drafter/CAD Operator I 16.17 30062 - Drafter/CAD Operator II 18.10 30063 - Drafter/CAD Operator III 20.18 30064 - Drafter/CAD Operator IV 24.83 30081 - Engineering Technician I 16.33 30082 - Engineering Technician II 18.34

30083 - Engineering Technician III 20.51 30084 - Engineering Technician IV 25.41 30085 - Engineering Technician V 31.08 30086 - Engineering Technician VI 37.61 30090 - Environmental Technician 22.42 30095 - Evidence Control Specialist 23.12 30210 - Laboratory Technician 22.77 30221 - Latent Fingerprint Technician I 25.61 30222 - Latent Fingerprint Technician II 28.29 30240 - Mathematical Technician 24.66 30361 - Paralegal/Legal Assistant I 20.56 30362 - Paralegal/Legal Assistant II 25.47 30363 - Paralegal/Legal Assistant III 31.16 30364 - Paralegal/Legal Assistant IV 37.71 30375 - Petroleum Supply Specialist 28.29 30390 - Photo-Optics Technician 22.42 30395 - Radiation Control Technician 28.29 30461 - Technical Writer I 23.53 30462 - Technical Writer II 28.79 30463 - Technical Writer III 34.83 30491 - Unexploded Ordnance (UXO) Technician I 25.78 30492 - Unexploded Ordnance (UXO) Technician II 31.19 30493 - Unexploded Ordnance (UXO) Technician III 37.38 30494 - Unexploded (UXO) Safety Escort 25.78 30495 - Unexploded (UXO) Sweep Personnel 25.78 30501 - Weather Forecaster I 25.61 30502 - Weather Forecaster II 31.15 30620 - Weather Observer Combined Upper Air Or (see 2) 20.18 Surface Programs 30621 - Weather Observer Senior (see 2) 22.42 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 31.19 31020 - Bus Aide 12.73*** 31030 - Bus Driver 17.53 31043 - Driver Courier 15.56 31260 - Parking and Lot Attendant 11.35*** 31290 - Shuttle Bus Driver 14.96*** 31310 - Taxi Driver 14.18*** 31361 - Truckdriver Light 15.14 31362 - Truckdriver Medium 16.30 31363 - Truckdriver Heavy 20.60 31364 - Truckdriver Tractor-Trailer 20.60 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.20 99030 - Cashier 10.94*** 99050 - Desk Clerk 12.03*** 99095 - Embalmer 25.35 99130 - Flight Follower 25.78 99251 - Laboratory Animal Caretaker I 13.98*** 99252 - Laboratory Animal Caretaker II 15.07 99260 - Marketing Analyst 28.42 99310 - Mortician 25.35 99410 - Pest Controller 17.18 99510 - Photofinishing Worker 13.54***

99710 - Recycling Laborer 20.21 99711 - Recycling Specialist 23.98 99730 - Refuse Collector 18.37 99810 - Sales Clerk 12.17*** 99820 - School Crossing Guard 12.19*** 99830 - Survey Party Chief 23.73 99831 - Surveying Aide 15.72 99832 - Surveying Technician 21.57 99840 - Vending Machine Attendant 19.81 99841 - Vending Machine Repairer 24.58 99842 - Vending Machine Repairer Helper 19.81

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($15.00 per hour) or 13658 ($11.25 per hour).

Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands.

Note: Executive Order (EO) 13706 Establishing Paid Sick Leave for Federal Contractors applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1 2017. If this contract is covered by the EO the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness injury or other health-related needs including preventive care; to assist a family member (or person who is like family to the employee) who is ill injured or has other health-related needs including preventive care; or for reasons resulting from or to assist a family member (or person who is like family to the employee) who is the victim of domestic violence sexual assault or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.60 per hour up to 40 hours per week or $184.00 per week or $797.33 per month

HEALTH & WELFARE EO 13706: $4.23 per hour up to 40 hours per week or $169.20 per week or $733.20 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706 Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor; 3 weeks after 5 years 4 weeks after 15 years and 5 weeks after 20 years. Length of service includes the whole span of continuous service with the present contractor or successor wherever employed and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day Martin Luther King Jr.'s Birthday Washington's Birthday Memorial Day Juneteenth National Independence Day Independence Day Labor Day Columbus Day Veterans' Day Thanksgiving Day and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE

FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b) this wage determination does not apply to any employee who individually qualifies as a bona fide executive administrative or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals (29 C.F.R. 541.400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally because job titles vary widely and change quickly in the computer industry job titles are not determinative of the application of the computer professional exemption. Therefore the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures including consulting with users to determine hardware software or system functional specifications;

(2) The design development documentation analysis creation testing or modification of computer systems or programs including prototypes based on and related to user or system design specifications;

(3) The design documentation testing creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY:

If you work at night as part of a regular tour of duty you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance explosives and incendiary materials. This includes work such as screening blending dying mixing and pressing of sensitive ordnance explosives and pyrotechnic compositions such as lead azide black powder and photoflash powder. All dry-house activities involving propellants or explosives. Demilitarization modification renovation demolition and maintenance operations on sensitive ordnance explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with or in close proximity to ordnance (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands face or arms of the employee engaged in the operation irritation of the skin minor burns and the like; minimal damage to immediate or adjacent work area or equipment being used. All operations involving unloading storage and hauling of ordnance explosive and incendiary ordnance material other than small arms ammunition. These differentials are only applicable to work that has been specifically designated by the agency for ordnance explosives and incendiary material differential pay.

** UNIFORM ALLOWANCE **

If employees are required to wear uniforms in the performance of this contract (either by the terms of the Government contract by the employer by the state or local law etc.) the cost of furnishing such uniforms and maintaining (by laundering or dry cleaning) such uniforms is an expense that may not be borne by an employee where such cost reduces the hourly rate below that required by the wage determination. The Department of Labor will accept payment in accordance with the following standards as compliance:

The contractor or subcontractor is required to furnish all employees with an adequate number of uniforms without cost or to reimburse employees for the actual cost of the uniforms. In addition where uniform cleaning and maintenance is made the responsibility of the employee all contractors and subcontractors subject to this wage determination shall (in the absence of a bona fide collective bargaining agreement providing for a different amount or the furnishing of contrary affirmative proof as to the actual cost) reimburse all employees for such cleaning and maintenance at a rate of $3.35 per week (or $.67 cents per day). However in those instances where the uniforms furnished are made of ""wash and wear"" materials may be routinely washed and dried with other personal garments and do not require any special treatment such as dry cleaning daily washing or commercial laundering in order to meet the cleanliness or appearance standards set by the terms of the Government contract by the contractor by law or by the nature of the work there is no requirement that employees be reimbursed for uniform maintenance costs.

** SERVICE CONTRACT ACT DIRECTORY OF OCCUPATIONS **

The duties of employees under job titles listed are those described in the ""Service Contract Act Directory of Occupations"" Fifth Edition (Revision 1) dated September 2015 unless otherwise indicated.

** REQUEST FOR AUTHORIZATION OF ADDITIONAL CLASSIFICATION AND WAGE RATE

Standard Form 1444 (SF-1444) **

Conformance Process:

The contracting officer shall require that any class of service employee which is not listed herein and which is to be employed under the contract (i.e. the work to be performed is not performed by any classification listed in the wage determination) be classified by the contractor so as to provide a reasonable relationship (i.e. appropriate level of skill comparison) between such unlisted classifications and the classifications listed in the wage determination (See 29 CFR 4.6(b)(2)(i)). Such conforming procedures shall be initiated by the contractor prior to the performance of contract work by such unlisted class(es) of employees (See 29 CFR 4.6(b)(2)(ii)).

The Wage and Hour Division shall make a final determination of conformed classification wage rate and/or fringe benefits which shall be paid to all employees performing in the classification from the first day of work on which contract work is performed by them in the classification. Failure to pay such unlisted employees the compensation agreed upon by the interested parties and/or fully determined by the Wage and Hour Division retroactive to the date such class of employees commenced contract work shall be a violation of the Act and this contract. (See 29 CFR 4.6(b)(2)(v)). When multiple wage determinations are included in a contract a separate SF-1444 should be prepared for each wage determination to which a class(es) is to be conformed.

The process for preparing a conformance request is as follows:

1) When preparing the bid the contractor identifies the need for a conformed occupation(s) and computes a proposed rate(s).

2) After contract award the contractor prepares a written report listing in order the proposed classification title(s) a Federal grade equivalency (FGE) for each proposed classification(s) job description(s) and rationale for proposed wage rate(s) including information regarding the agreement or disagreement of the authorized representative of the employees involved or where there is no authorized representative the employees themselves. This report should be submitted to the contracting officer no later than 30 days after such unlisted class(es) of employees performs any contract work.

3) The contracting officer reviews the proposed action and promptly submits a report of the action together with the agency's recommendations and pertinent information including the position of the contractor and the employees to the U.S. Department of Labor Wage and Hour Division for review (See 29 CFR 4.6(b)(2)(ii)).

4) Within 30 days of receipt the Wage and Hour Division approves modifies or disapproves the action via transmittal to the agency contracting officer or notifies the contracting officer that additional time will be required to process the request.

5) The contracting officer transmits the Wage and Hour Division's decision to the contractor.

6) Each affected employee shall be furnished by the contractor with a written copy of such determination or it shall be posted as a part of the wage determination (See 29 CFR 4.6(b)(2)(iii)).

Information required by the Regulations must be submitted on SF-1444 or bond paper.

When preparing a conformance request the ""Service Contract Act Directory of Occupations"" should be used to compare job definitions to ensure that duties requested are not performed by a classification already listed in the wage determination. Remember it is not the job title but the required tasks that determine whether a class is included in an established wage determination. Conformances may not be used to artificially split combine or subdivide classifications listed in the wage determination (See 29 CFR 4.152(c)(1))."

Attachment J-01

Performance Work Statement (PWS)

SMASS IV 80KSC022R0010 Performance Work Statement (PWS) Attachment J-01

Table of Contents

BACKGROUND

CONTRACT/PROGRAM MANAGEMENT

Administrative

Contractor Management Responsibilities

Foreign Travel

TECHNICAL INTEGRATION

Program and Project Integration

Program and Project Technical Assessments

NASA KSC SMA Policy Activities

Miscellaneous Studies

TECHNICAL DISCIPLINES

Safety and Reliability Engineering and Assurance

4.1.1 System Safety Engineering Analysis and Operational Safety

4.1.2 Reliability and Maintainability Engineering Analysis

Quality Engineering and Assurance

4.2.1 KSC Quality Requirements and Assessments

4.2.2 Problem Reporting and Corrective Action Evaluation

4.2.3 Surveillance, Inspection, and Process Analysis

Software Safety and Assurance

Range Flight Safety

Independent Assessments

Metrology and Calibration Support Activities

Payload Safety Program

BACKGROUND

a. The Kennedy Space Center (KSC) Safety and Mission Assurance (SMA) Directorate supports the KSC development, operations, institutional activities, and NASA Programs and Projects. The effort described in this Performance Work Statement (PWS) provides mission assurance, engineering, and risk assessment in the SMA disciplines primarily at KSC. However, resident support may be required at other NASA centers, facilities, or sites.

b. The Government maintains responsibility for all SMA policies and decisions. The contractor shall provide services and products that support the accomplishment of those policies and decisions as defined in the contract. This effort includes the review of work done by other contractors and NASA organizations and applies to current and future Programs and Projects.

c. The contractor shall have the capability to subcontract out unique services or expertise as required to complete SMASS IV requirements.

d. Functions and tasks described herein shall not be construed as implying that the contractor has the authority to approve or disapprove Government policies, procedures, specifications, or requirements, or those of any other Government contractor. Nor will language herein be construed to mean that the contractor has the authority to accept or reject, on the Government’s behalf, any products or services. When Government approval/disapproval is required, the contractor shall present an analysis and make recommendations to the appropriate Government official who will utilize the information provided to determine the final action that needs to be implemented. The contractor is not authorized to act as an agent of the Government or to represent itself as such.

Specific exceptions to this approval restriction will be directed by the Government in writing on a case-by-case basis.

CONTRACT/PROGRAM MANAGEMENT

a. The contractor shall perform the following administrative and contractor management tasks under this contract. This work supports multiple Programs and Projects to ensure that all SMA issues and concerns are identified and addressed.

b. The contractor shall provide personnel and other resources necessary to accomplish the requirements of the contract, maintain team-oriented working relationships with the Government at all levels in the organization, and perform the contract requirements in a cost-effective and efficient manner.

c. The contractor shall maintain flexibility and responsiveness to all Government requests and ensure safe, timely, accurate, and thorough responses to the Government’s requests for information.

Administrative

a. Place of Performance: Unless approved otherwise by the Government, the contractor shall meet the requirements of the contract by being physically on-site of the Government center or resident office that is being supported. Depending on the nature of the work tasks, performance may be conducted via on-site, telework, remote, or hybrid work environments.

b. The contractor shall follow work performance guidelines as established by the Government. Performance may also include travel to other sites supported by the Government.

The contractor shall provide estimated travel costs to the Contracting Officer Representative (COR) and obtain approval from the COR for Government directed travel. All Government-directed travel shall be in accordance with Government rates for per diem and travel. All authorized travel shall be conducted and reimbursed in accordance with the Federal Travel Regulations (41 CFR Chapters 300 through 304).

c. The contractor shall manage and administer all contract activity.

d. The contractor shall provide and maintain management interfaces with KSC SMA, the Contracting Officer (CO), COR, technical management, and Resource Management Officer

(RMO).

e. The contractor shall report formally as required in the contract and shall respond to all queries related to contracted activities.

f. The contractor shall integrate all tasks…