Section J-13J ATCH 086-001 2025-04-04 PROMULGATION FRONT MATTER WITH COPYRIGHT (IPW).pdf

REV

DATE: DD MMM YYYY CURRENT VERSION: DD MMM YYYY

TP: #####

FORMERLY Previous TP Number

-, A, B, etc.

TECHNICAL PUBLICATION

HULL, MECHANICAL, & ELECTRICAL ELECTRONICS ORDNANCE

TP TITLE

TYPE, MODEL, PART NUMBER

SUBTITLE (TYPE OF MANUAL)

MANUFACTURER

CG-22 ####### or CONTRACT NUMBER ######-##-#-######

THIS TECHNICAL PUBLICATION SUPERSEDES TP# DATED DD MMM YYYY

SWBS ### USE 3 DIGITS ONLY

DISTRIBUTION STATEMENT D - Distribution authorized to DHS, USCG, DoD and their contractors to protect publications required for official use or for administrative or operational purposes only; determined on 00 MMM 0000. Other requests for this document shall be referred to Commander, USCG Surface Forces Logistics Center, ESD –Tech Info Mgmt Br, 2401 Hawkins Point Road, M/S 25, Baltimore, MD 21226.

WARNING - This document contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C., Sec 2751, et seq.) or the Export Control Reform Act of 2018 (Title 50, U.S.C., Chapter 58, Sec. 4801-4852). Violations of these export laws are subject to severe criminal penalties. Disseminate in accordance with provisions of DoD Directive 5230.25.

INTELLECTUAL PROPERTY WARNING - This document contains copyright or proprietary materials. Infringement of copyright or proprietary material may violate existing Federal laws and statutes and result in criminal penalties, imprisonment, or removal from office.

DESTRUCTION NOTICE - For unclassified, limited documents, destroy by any method that will prevent disclosure of contents or reconstruction of the document.

PUBLISHED UNDER AUTHORITY OF THE U.S. COAST GUARD

FULL EXPORT-CONTROL WARNING STATEMENT

NOTICE TO ACCOMPANY THE DISSEMINATION OF EXPORT-CONTROLLED

TECHNICAL DATA

Export of the attached information which includes, in some circumstances, release to foreign nationals within the United States, without first obtaining approval or license from the Department of State for items controlled by the International Traffic in Arms Regulations (ITAR) or the Department of Commerce for controlled by the Export Administration Regulations (EAR), may constitute a violation of the law.

Under 22 U.S.C. 2778, the penalty for unlawful export of items or information controlled under the ITAR is up to 20 years imprisonment, or a fine of $1,000,000 or both. Under 50 U.S.C., Appendix 2410, the penalty for unlawful export of items or information controlled under the EAR is a fine of up to $1,000,000, or five times the value of the exports, whichever is greater, or for an individual, imprisonment of up to 10 years, or a fine of up to $250,000, or both.

In accordance with your certification that establishes you as a “qualified U.S. contractor,” unauthorized dissemination of this information is prohibited and may result in your disqualification as a qualified U.S. contractor, and may be considered in determining your eligibility for future contract with the Department of Defense.

The U.S. Government assumes no liability for direct patent infringement, contributory patent infringement, or misuse of technical data.

The U.S. Government does not warrant the adequacy, accuracy, currency, or completeness of the technical data.

The U.S. Government assumes no liability for loss, damage, or injury, resulting from the manufacture or use for any purpose of any product, article, system, or material involving reliance upon any or all technical data furnished in response to the request for technical data.

If the technical data furnished by the Government will be used for commercial manufacturing or other profit potential, a license for such use may be necessary. Any payments made in support of the request for data do not include or involve any license rights.

A copy of this notice will be provided with any partial or complete reproduction of these data that are provided to qualified U.S. contractors.

TECHNICAL MANUAL

DEFICIENCY / EVALUATION

REPORT

ANY DEFICIENCIES DETECTED

WITHIN THIS PUBLICATION SHOULD

BE REPORTED BY SUBMITTING A

CG-22 IN CGLIMS-STIP

New Document vs Existing Document Requests To request a change to an existing document, DO NOT utilize 'Request New Document' from the CG-22 drop-down menu in STIP. Go to the record in STIP and select the 'Submit CG22' button in the Details Panel to the right. Documents CANNOT be properly processed in STIP or SMDP if you do not submit correctly. Refer to the 'CG-22 GUIDE - Submission' or contact anyone in the CG-22 Contacts at the bottom of the CGLIMS-STIP CG-22 Support Page.

FOR TECHNICAL ISSUSE PLEASE CONTACT SFLC-ESD-TIMB-PPDS-TECHPUB@USCG.MIL

RECORD OF CHANGES

TP NO. #####

REVISION DATE SUMMARY OF CHANGES NAME

REV - DD-MMM-YYYY

Tech Pub is Promulgated in accordance with Contract number HSCG23-14-C-APC002. F. Last