Amendment A001.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

1. CONTRACT ID CODE

N/A

PAGE

2. AMENDMENT/MODIFICATION NO. 3. EFFECTIVE DATE 4. REQUISITION/PURCHASE NO. 5. PROJECT NO. (If applicable)

A001 09/17/2025 N/A

WA ERFO FS GIFPN603 2020-1(1),

Gifford Pinchot Repairs 2020, Phase 1

6. ISSUED BY CODE N/A 7. ADMINISTERED BY (If other than Item 6) CODE N/A

Department of Transportation Federal Highway Administration 610 East Fifth Street Vancouver WA 98661-3801

8. NAME AND ADDRESS OF CONTRACTOR (No., street, county, State and Zip Code) 9A. AMENDMENT OF SOLICITATION NO.

X

69056724B000011

9B. DATED (SEE ITEM 11)

08/28/2025

10A. MODIFICATION OF CONTRACT/ORDER NO.

N/A

10B. DATED (SEE ITEM 13)

CODE: N/A FACILITY CODE: N/A

N/A

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

| X | The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers

(__ ) is extended, ( x ) is not extended.

Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

N/A

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS,

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A THIS CHANGE ORDER IS ISSUED PURSUANT TO (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE CONTRACT ORDER NO. IN

ITEM 10A.

N/A

B THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (Such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D OTHER (Specify type of modification and authority)

N/A

E. IMPORTANT: Contractor n/a is not, n/a is required to sign this document and return n/a copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

WA ERFO FS GIFPN603 2020-1(1), Gifford Pinchot Repairs 2020, Phase 1

See page 2

15a. NAME AND TITLE OF SIGNER (Type or print) 15a. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

15B. CONTRACTOR/OFFEROR 15C. DATE SIGNED 16B. UNITED STATES OF AMERICA 16C. DATE SIGNED

BY_________________________________________ BY N/A___________________________ N/A (Signature of person authorized to sign) (Signature of Contracting Officer)

NSN 7540-01-152-8070

PREVIOUS EDITION NOT USABLE

30-105 STANDARD FORM 30 (REV. 10-83)

Prescribed by GSA

FAR (48 CFR) 53.243

Amendment No. A001, dated 09/17/2025 Project No.: WA ERFO FS GIFFPN603 2020-1(1)

Solicitation No. 69056724B000011 Project Name: Gifford Pinchot Repairs 2020, Phase 1

REVISIONS ARE AS FOLLOWS:

BID BOND, STANDARD FORM 24 (SF24)

Replaces Bid Bond, Standard Form 24 with new expiration date of 1/31/2027.

NOTICE TO BIDDERS

Page A-2. Revises section II. Pre-Bid Information. Updates the date for General and

Technical Questions from 09/19/2025 to 09/23/2025. Updates Physical Data reference location.

SF 1442 CONTINUATION

Pages A-5 through A-6a. Updates Block 9, Physical Data. Updates Block 24, Submitting

Invoices by removing language that was added to the Contract Clause section by this

Amendment A001. 1252.232-70 Electronic Submission of Payment Requests. (NOV

2022)[(DEVIATION)(AUG 2025)]

CONTRACT CLAUSES

Page C-105 through 106. Adds 1252.232-70 Electronic Submission of Payment

Requests. (NOV 2022)[(DEVIATION)(AUG 2025)]

GENERAL WAGE DECISION

Page D-1 through D-58 Updates Davis-Bacon General Wage Decision Number

WA2025001 08/22/2025 to current effective date of 09/12/2025.

SPECIAL CONTRACT REQUIREMENTS

Page E-2, Adds Subsection 102.02, Preparation of Bids.

Page E-2, Adds Subsection 102.02A, Physical Data

Page E-12, Subsection 107.01A, National Pollutant Discharge Elimination System Permit

(NPDES). Updates location of Physical Data Files.

Pages E-20 through E-21, Subsection 108.03 Determination and Extension of Contract

Time. Updates paragraph (c).

Pages E-23 through E-27, Subsection 109.06 Pricing of Adjustments. Adds paragraph

(d), Variation in Estimated Quantity.

Amendment No. A001, dated 09/17/2025 Project No.: WA ERFO FS GIFFPN603 2020-1(1)

Solicitation No. 69056724B000011 Project Name: Gifford Pinchot Repairs 2020, Phase 1

ENCLOSURES

Pages:

Bid Bond (SF24)

A-2

A-5 through A-6a

C-105 through C-106

D-1 through D-58

E-2

E-12

E-20 through E-21

E-23 through E-27

Bid Bond (See Instructions on Page 3)

Date Bond Executed (Must Not Be Later Than Bid Opening Date)

OMB Control Number: 9000-0001 Expiration Date: 1/31/2027

Principal (Legal Name And Business Address) Type Of Organization ("X" One)

State Of Incorporation

Surety(ies) (Name And Business Address)

Percent Of Bid Price

Penal Sum Of Bond Amount Not To Exceed Million(s) Thousand(s) Hundred(s) Cents

Bid Identification Bid Date Invitation Number

Authorized For Local Reproduction Previous Edition Is Not Usable

STANDARD FORM 24 (REV. 10/2023)

Prescribed by GSA - FAR (48 CFR) 53.228(a)

For (Construction, Supplies Or Services)

Obligation:

We, the Principal and Surety(ies) are firmly bound to the United States of America (hereinafter called the Government) in the above penal sum. For payment of the penal sum, we bind ourselves, our heirs, executors, administrators, and successors, jointly and severally. However, where the Sureties are corporations acting as co-sureties, we, the Sureties, bind ourselves in such sum "jointly and severally" as well as "severally" only for the purpose of allowing a joint action or actions against any or all of us. For all other purposes, each Surety binds itself, jointly and severally with the Principal, for the payment of the sum shown opposite the name of the Surety. If no limit of liability is indicated, the limit of liability is the full amount of the penal sum.

Conditions:

The Principal has submitted the bid identified above.

Therefore:

The above obligation is void if the Principal - (a) upon acceptance by the Government of the bid identified above, within the period specified therein for acceptance (sixty (60) days if no period is specified), executes the further contractual documents and gives the bond(s) required by the terms of the bid as accepted within the time specified (ten (10) days if no period is specified) after receipt of the forms by the Principal; or (b) in the event of failure to execute such further contractual documents and give such bonds, pays the Government for any cost of procuring the work which exceeds the amount of the bid.

Each Surety executing this instrument agrees that its obligation is not impaired by any extension(s) of the time for acceptance of the bid that the Principal may grant to the Government. Notice to the Surety(ies) of extension(s) is waived. However, waiver of the notice applies only to extensions aggregating not more than sixty (60) calendar days in addition to the period originally allowed for acceptance of the bid.

Other (Specify) Individual Partnership Joint Venture Corporation

Revised by Amendment A001

69056724B000011 Construction- WA ERFO FS GIFPN603 2020-1(1), Gifford Pinchot Repairs 2020, Phase 1

2.

(Seal)2.(Seal)

1.

1.

1.

1. 3.2.

Name(s) (Typed)

Signature(s)

Individual Surety(ies)

Name(s) And Title(s) (Typed)

Corporate Seal

(Seal)

3.

(Seal)

2.

(Seal) Signature(s)

Principal

2.

State Of Incorporation Liability Limit ($)

2.

2.

1.Name(s) And Title(s) (Typed)

Signature(s) 1. 2. Corporate Seal

Corporate Seal

Su re ty C

Name And Address

Signature(s) Name(s) And Title(s) (Typed)

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

Name(s) And Title(s) (Typed)

Su re ty D

Signature(s)

Name And Address

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

Liability Limit ($)State Of Incorporation

1.

1.

Su re ty A

Name And Address

Su re ty B

Name(s) And Title(s) (Typed)

Signature(s)

Name And Address

Corporate Surety(ies)

Witness:

The Principal and Surety(ies) executed this bid bond and affixed their seals on the above date.

STANDARD FORM 24 (REV. 10/2023) PAGE 2

Revised by Amendment A001

STANDARD FORM 24 (REV. 10/2023) PAGE 3

Corporate Seal

Su re ty F

Name And Address

Signature(s) Name(s) And Title(s) (Typed)

1.

1.

State Of Incorporation

2.

2.

Liability Limit ($)

Corporate Seal

Name(s) And Title(s) (Typed)

Su re ty G

Signature(s)

Name And Address

1.

1.

2.

2.

State Of Incorporation Liability Limit ($)

Corporate Seal

State Of Incorporation Liability Limit ($)

2.

2.

1.

1.

Name And Address

Signature(s) Name(s) And Title(s) (Typed)

Su re ty E

Instructions

1. This form is authorized for use when a bid guaranty is required. Any deviation from this form will require the written approval of the Administrator of General Services.

2. Insert the full legal name and business address of the Principal in the space designated "Principal" on the face of the form. An authorized person shall sign the bond. Any person signing in a representative capacity (e.g., an attorney-in-fact) must furnish evidence of authority if that representative is not a member of the firm, partnership, or joint venture, or an officer of the corporation involved.

3. The bond may express penal sum as a percentage of the bid price. In these cases, the bond may state a maximum dollar limitation (e.g., 20% of the bid price but the amount not to exceed dollars).

4. (a) Corporations executing the bond as sureties must appear on the Department of the Treasury's list of approved sureties and must act within the limitations listed therein. The value put into the Liability

Limit block is the penal sum (i.e., the face value) of the bond, unless a co-surety arrangement is proposed.

(b) When multiple corporate sureties are involved, their names and addresses shall appear in the spaces (Surety A, Surety B, etc.) headed "Corporate Surety(ies)." In the space designated

"Surety(ies)" on the face of the form, insert only the letter identifier corresponding to each of the sureties. Moreover, when co-surety arrangements exist, the parties may allocate their respective limitations of liability under the bond, provided that the sum total of their liability equals 100% of the bond penal sum.

(c) When individual sureties are involved, a completed Affidavit of Individual Surety (Standard Form 28) for each individual surety, shall accompany the bond. The Government may require the surety to furnish additional substantiating information concerning its financial capability.

5. Corporations executing the bond shall affix their corporate seals. Individuals shall execute the bond opposite the word "Corporate Seal"; and shall affix an adhesive seal if executed in Maine, New

Hampshire, or any other jurisdiction requiring adhesive seals.

6. Type the name and title of each person signing this bond in the space provided.

7. In its application to negotiated contracts, the terms "bid" and "bidder" shall include "proposal" and

"offeror."

STANDARD FORM 24 (REV. 10/2023) PAGE 4

Paperwork Reduction Act Statement - This information collection meets the requirements of 44 USC §

3507, as amended by section 2 of the Paperwork Reduction Act of 1995. You do not need to answer these questions unless we display a valid Office of Management and Budget (OMB) control number. The OMB control number for this collection is 9000-0001. We estimate that it will take 1 hour to read the instructions, gather the facts, and answer the questions. Send only comments relating to our time estimate, including suggestions for reducing this burden, or any other aspects of this collection of information to: General

Services Administration, Regulatory Secretariat Division (MVCB), 1800 F Street, NW, Washington, DC

20405.

A-2

Notice to Bidders Revised by Amendment A001

Project: WA ERFO FS GIFPN603 2020-1(1), Gifford Pinchot Repairs 2020, Phase 1

II. Pre- bid Information.

GENERAL AND TECHNICAL QUESTIONS REGARDING PROPOSED WORK FOR

THIS PROJECT WILL BE ACCEPTED UNTIL CLOSE-OF-BUSINESS ON 09/19/2025

09/23/2025.

Refer to page A-5 for information on how to submit questions related to General Information and

Technical Information. Answers to General and Technical Questions will be posted at https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view.

Every attempt to respond to questions will be made. However, response to questions received after the above posted date is not guaranteed.

Electronic Plan Sheets. This solicitation includes electronic plan sheets available at https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view

Viewing the Project: This project was pre-advertised in the Notice to Prospective bidders posted October 7, 2024. The project may be advertised during a period when viewing of the project may not be possible due to snow. Therefore, prospective Bidders were encouraged to view the project during fall as conditions permitted. No Federal Highway Administration personnel will be available for show me tours.

Physical Data. Physical data applicable to this project is listed in the Special Contract

Requirements, Subsection 102.02A Physical Data.

The following Physical Data files applicable to this project are posted to SAM.gov:

GP2020_ERFO_EPA_CompiledSWPPP_signed.pdf wa-ef-gifpn2020-1-1_controlsheet.xlsx wa-ef-gifpn2020-1-1_final_GEO_Memo.pdf wa-ef-gifpn2020-1-1_Hydraulic_Report.pdf wa-ef-gifpn2020-1-1_XS.pdf wa-ef-gifpn2020-1-1_XS_culverts.pdf wa-ef-gifpn2022-1-1__Earthwork.pdf wa-ef-gifpn2022-1-1_proposed-alignment.pdf

Physical Data.zip wa-ef-gifpn2020-1-1_Proposed-3D-breaklines.dxf wa-ef-gifpn2022-1-1__Existing-ground-surface.xml wa-ef-gifpn2022-1-1__Proposed-finished-surface_M.P.0.6.xml wa-ef-gifpn2022-1-1__Proposed-finished-surface_M.P.0.9.xml wa-ef-gifpn2022-1-1__Proposed-finished-surface_M.P.1.0.xml wa-ef-gifpn2022-1-1__Proposed-finished-surface_M.P.1.2.xml wa-ef-gifpn2022-1-1_proposed-alignment_M.P.0.6.xml wa-ef-gifpn2022-1-1_proposed-alignment_M.P.0.9.xml wa-ef-gifpn2022-1-1_proposed-alignment_M.P.1.0.xml wa-ef-gifpn2022-1-1_proposed-alignment_M.P.1.2.xml https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view https://sam.gov/opp/cef4d6f16b3a4f85b400e58caae04ac4/view

A-5

Continuation SF 1442 Revised by Amendment A001

Project: WA ERFO FS GIFPN603 2020-1(1), Gifford Pinchot Repairs 2020, Phase 1

Block 9 FOR GENERAL INFORMATION, call 360.619.7520 from the hours of 8:00 a.m. to

4:00 p.m. local time or e-mail us at wfl.contracts@dot.gov.

FOR TECHNICAL INFORMATION (plan and specification questions only), requests for technical information about this project will only be accepted in writing.

Submit questions via e-mail at wfl.plans-spec@dot.gov.

QUESTIONS/ANSWERS POSTED ONLINE. You can view questions and answers on the Contract Opportunities Website SAM.gov.

• Insert the solicitation number in search box.

• Scroll to the project.

• Make sure you are on the most recent view and look in the right section of the page for the most recent Q&A document.

FOR DAVIS-BACON WAGE RATE INFORMATION go to the U.S. Department of

Labor, Branch of Construction Wage Determinations Website:

https://www.dol.gov/agencies/whd/government-contracts/state-assignments.

FOR PHYSICAL DATA.

See subsection 102.02A of the Special Contract Requirements for the list of Physical

Data that is posted with the solicitation on the SAM.gov website.See Notice to Bidders

(page A-2) for listing of available data. Physical Data will be posted with the solicitation on the SAM.gov website.

FOR BID RESULTS, the bid opening summary will be posted on the Contract

Opportunities Website SAM.gov shortly after bid opening. Bid tabulations will be available on SAM.gov approximately 3 working days after the bid opening.

Block 11 COMPLETION DATE: The Contractor shall be required to (a) commence work under this contract within 10 calendar days after the date the Contractor receives the notice to proceed, (b) prosecute the work diligently, and (c) complete the entire work ready for use not later than 09/28/2027, subject to such extensions as may be authorized. The time stated for completion shall include final cleanup of the premises.

The completion date is based on the assumption that the successful offeror will receive the notice to proceed by 11/14/2025. The completion date will be extended by the number of calendar days after the above date that the Contractor receives the notice to proceed, except to the extent that the delay in issuance of the notice to proceed results from the failure of the Contractor to execute the contract and give the required performance and payment bonds within the time specified in the offer.

Work shall be completed on or before the date specified above, subject to such extensions as may be authorized by the terms of the contract and the specifications made a part thereof.

Block 12A PERFORMANCE & PAYMENT BONDS: See FAR Clause, 52.228-15, Performance and Payment Bonds - Construction (clauses begin on page C-1) and Subsection 102.06 of the Standard Specifications for Construction of Roads and Bridges on Federal Highway

Projects, FP-14, U.S. Customary Units.

mailto:wfl.contracts@dot.gov mailto:wfl.plans-spec@dot.gov https://sam.gov/content/home https://www.dol.gov/agencies/whd/government-contracts/state-assignments https://sam.gov/content/home https://sam.gov/content/home

A-6

Block 13A BID OPENING: Virtual viewing of the bid opening is available via MS TEAMS at

Join the meeting now Meeting ID: 216 449 130 754 6 Passcode: 37Nk9wv9 Dial in by phone +1 509-931-1572, 682312917# United States, Spokane

Beginning on May 7, 2025, visitors attempting to enter any Department of Transportation owned/leased facility using a driver’s license that is not REAL ID-compliant will need to present an alternative form of acceptable identification (See List Below). Department of

Transportation employees and contractors will need to ensure that they share this requirement with their visitors/guests prior to scheduling an event or meeting to avoid potential delays or denial of entry.

As an alternative to a REAL ID-compliant driver’s license, visitors may use the following forms of identification for building access:

• State-issued Enhanced Driver’s License

• U.S. Passport

• U.S. Passport Card

• DHS Trusted Traveler Cards (Global Entry, NEXUS, SENTRI, FAST)

• U.S. Department of Defense ID, including IDs issued to dependents

• Permanent Resident Card

• Border Crossing Card

• An acceptable photo ID issued by a federally recognized, Tribal Nation/Indian Tribe

• HSPD-12 PIV card

• Foreign Government-issued Passport

• Canadian provincial driver's license or Indian and Northern Affairs Canada card

• Transportation Worker Identification Credential (TWIC)

• U.S. Citizenship and Immigration Services Employment Authorization Card (I-766)

• U.S. Merchant Mariner Credential

• Veteran Health Identification Card (VHIC)

Block 13B BID BOND AMOUNT: See FAR Clause 52.228-1, Bid Guarantee (clauses begin on page C-1).

ADDITIONAL INFORMATION: See Subsections 102.03 and 102.04 of Standard

Specifications for Construction of Roads and Bridges on Federal Highway Projects, FP-

14, U.S. Customary Units.

Block 24 SUBMITTING INVOICES: See Subsection 109.08 of the Standard Specifications for

Construction of Roads and Bridges on Federal Highway Projects FP-14, U.S. Customary

Units.

The Contractor certifies that, by submitting an invoice to the Government, the supplies and/or services billed have been shipped, rendered, or delivered in accordance with instructions issued by the ordering officer; that they are reflected in the quantities and/or period of performance stated on the invoice; and that such supplies and/or services conform to the quantity and quality requirements specified in the applicable contract, order, or blanket purchase agreement.

https://teams.microsoft.com/l/meetup-join/19%3ameeting_YmE5OGMxZDMtZGNlMi00ZTZiLWI2ODMtNDNlMzA1ODgyNDkw%40thread.v2/0?context=%7b%22Tid%22%3a%22c4cd245b-44f0-4395-a1aa-3848d258f78b%22%2c%22Oid%22%3a%22e606543e-ffdf-4636-992d-64b434bd44da%22%7d tel:+15099311572,,682312917

A-6a

Furthermore, pursuant to Executive Order 14173, Ending Illegal Discrimination And

Restoring Merit-Based Opportunity, the Contractor certifies that it is in compliance with the Equal Protection principles of the Constitution and all applicable Federal anti-discrimination laws, and acknowledges that such compliance is material to the

Government’s payment decision under the False Claims Act (31 U.S.C. §

3729(b)(4)). The Contractor also affirms that it does not operate any diversity, equity, and inclusion (DEI) initiatives that are inconsistent with the Equal Protection principles of the Constitution and the non-discrimination requirements of Federal law, as interpreted by the Supreme Court in Students for Fair Admissions v. Harvard, 600 U.S. 181 (2023).

ESTIMATED PRICE RANGE. The price range of the project work is between $2,000,000 and

$5,000,000.

C-105

Contract Clauses Revised by Amendment A001

1252.232-70 Electronic Submission of Payment Requests. (NOV 2022) [(DEVIATION)(AUG 2025)]

(a) Definitions. As used in this clause—

(1) Contract financing payment has the meaning given in FAR 32.001.

(2) Payment request means a bill, voucher, invoice, or request for contract financing payment or invoice payment with associated supporting documentation. The payment request must comply with the requirements identified in FAR 32.905(b), “Content of Invoices,” this clause, and the applicable Payment clause included in this contract.

(3) Electronic form means an automated system transmitting information electronically according to the accepted electronic data transmission methods and formats identified in paragraph (c) of this clause. Facsimile, email, and scanned documents are not acceptable electronic forms for submission of payment requests.

(4) Invoice payment has the meaning given in FAR 32.001.

(b) Electronic payment requests. Except as provided in paragraph (e) of this clause, the contractor shall submit payment requests in electronic form. Purchases paid with a Governmentwide commercial purchase card are considered to be an electronic transaction for purposes of this rule, and therefore no additional electronic invoice submission is required.

(c) Processing system. The Department of Transportation utilizes the DELPHI system for processing invoices. The DELPHI module for submitting invoices is called iSupplier. Access to

DELPHI is granted with electronic authentication of credentials (name & valid email address) utilizing the GSA credentialing platform login.gov. Vendors submitting invoices are required to submit invoices via iSupplier (DELPHI) and authenticated via www.login.gov.

(d) Invoice requirements. To receive payment and in accordance with the Prompt Payment Act, all invoices submitted as attachments in iSupplier (DELPHI) shall contain the following:

(1) Invoice number and invoice date.

(2) Period of performance covered by invoice.

(3) Contract number and title.

(4) Task/Delivery Order number and title (if applicable).

(5) Amount billed (by CLIN), current and cumulative.

(6) Total ($) of billing.

(7) Cumulative total billed for all contract work to date.

(8) Name, title, phone number, and mailing address of person to be contacted in the event of a defective invoice.

(9) Travel. If the contract includes allowances for travel, all invoices which include charges pertaining to travel expenses will catalog a breakdown of reimbursable expenses with the appropriate receipts to substantiate the travel expenses.

(TAR Class Deviation 2025-02)

(10) The following statement “The Contractor certifies that, by submitting this invoice to the

Government, the supplies and/or services billed have been shipped, rendered, or delivered in accordance with instructions issued by the ordering officer; that they are reflected in the quantities and/or period of performance stated on the invoice; and that such supplies and/or services conform to the quantity and quality requirements specified in the applicable contract, order, or blanket purchase agreement.

Furthermore, pursuant to Executive Order 14173, Ending Illegal Discrimination And

Restoring Merit-Based Opportunity, the Contractor certifies that it is in compliance with the Equal

Protection principles of the Constitution and all applicable Federal anti-discrimination laws, and acknowledges that such compliance is material to the Government’s payment decision under the False

Claims Act (31 U.S.C. § 3729(b)(4)). The Contractor also affirms that it does not operate any diversity, equity, and inclusion (DEI) initiatives that are inconsistent with the Equal Protection principles of the Constitution and the non-discrimination requirements of Federal law, as interpreted http://www.login.gov/ https://www.transportation.gov/sites/dot.gov/files/2025-08/TAR_CD-2025-02_signed_by_SPE.pdf

C-106

Contract Clauses Revised by Amendment A001 by the Supreme Court in Students for Fair Admissions v. Harvard, 600 U.S. 181 (2023).”

(e) Payment system registration. All persons accessing the iSupplier (DELPHI) will be required to have their own unique user ID and password and be credentialed through login.gov.

(1) Electronic authentication. See www.login.gov for instructions.

(2) To create a www.login.gov account, the user will need a valid email address and a working phone number. The user will create a password and then www.login.gov will reply with an email confirming the email address.

(3) http://einvoice.esc.gov to establish an account. Users are required to log in to iSupplier (DELPHI) every 45 days to keep it active.

(4) Training on DELPHI. To facilitate use of DELPHI, comprehensive user information is available at http://einvoice.esc.gov.

(5) Account Management. Vendors are responsible to contact their assigned COR when their firm's points of contacts will no longer be submitting invoices, so they can be removed from the system.

(f) Waivers. For contractors/vendors who are unable to utilize DOT's DELPHI system, waivers may be considered by DOT on a case-by-case basis. Vendors should contact their Contracting

Officer's Representative (COR) for procedures.

(g) Exceptions and alternate payment procedures. If, based on one of the circumstances set forth in

1232.7002(a) or (b), and the contracting officer directs that payment requests be made by mail, the contractor shall submit payment requests by mail through the United States Postal Service to the designated agency office. If alternate payment procedures are authorized, the Contractor shall include a copy of the Contracting Officer's written authorization with each payment request. If DELPHI is succeeded by later technology, the Contracting Officer will supply the Contractor with the latest applicable electronic invoicing instructions.

http://www.login.gov/ http://einvoice.esc.gov/ http://einvoice.esc.gov/

D-1

General Wage Decision Revised by Amendment A001

GENERAL WAGE DECISION

Notice: On March 14, 2025, Executive Order 14026 was revoked. Contact U.S.

Department of Labor for further guidance.

General Decision Number: WA20250001 09/12/2025

Superseded General Decision Number: WA20240001

State: Washington

Construction Type: Highway

Counties: Washington Statewide.

HIGHWAY (Excludes D.O.E. Hanford Site in Benton and Franklin Counties)

Note: Contracts subject to the Davis-Bacon Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or

Executive Order 13658. Please note that these Executive Orders apply to covered contracts entered into by the federal government that are subject to the Davis-

Bacon Act itself, but do not apply to contracts subject only to the Davis-Bacon

Related Acts, including those set forth at 29 CFR 5.1(a)(1).

|If the contract is entered |. Executive Order 14026 |

|into on or after January 30, | generally applies to the |

|2022, or the contract is | contract. |

|renewed or extended (e.g., an |. The contractor must pay |

|option is exercised) on or | all covered workers at |

|after January 30, 2022: | least $17.75 per hour (or |

| | the applicable wage rate |

| | listed on this wage |

| | determination, if it is |

| | higher) for all hours |

| | spent performing on the |

| | contract in 2025. |

|If the contract was awarded on|. Executive Order 13658 |

|or between January 1, 2015 and| generally applies to the |

|January 29, 2022, and the | contract. |

|contract is not renewed or |. The contractor must pay all|

|extended on or after January | covered workers at least |

|30, 2022: | $13.30 per hour (or the |

| | applicable wage rate listed|

| | on this wage determination,|

| | if it is higher) for all |

| | hours spent performing on |

| | that contract in 2025. |

D-2

The applicable Executive Order minimum wage rate will be adjusted annually. If this contract is covered by one of the Executive Orders and a classification considered necessary for performance of work on the contract does not appear on this wage determination, the contractor must still submit a conformance request.

Additional information on contractor requirements and worker protections under the Executive Orders is available at http://www.dol.gov/whd/govcontracts.

Modification Number Publication Date

0 01/03/2025

1 02/07/2025

2 03/21/2025

3 04/25/2025

4 05/30/2025

5 06/06/2025

6 06/27/2025

7 07/18/2025

8 08/08/2025

9 08/22/2025

10 08/29/2025

11 09/05/2025

12 09/12/2025

CARP0003-001 06/01/2021

SOUTHWEST WASHINGTON: CLARK, COWLITZ, LEWIS (Piledriver only), PACIFIC (South of a straight line made by extending the north boundary line of Wahkiakum County west to Willapa Bay to the

Pacific Ocean), SKAMANIA, and WAHKIAKUM Counties.

Rates Fringes

Carpenters:

CARPENTERS..................$ 44.38 16.87

DIVERS TENDERS..............$ 49.09 16.87

DIVERS......................$ 93.09 16.87

DRYWALL.....................$ 44.38 16.87

MILLWRIGHTS.................$ 46.89 16.87

PILEDRIVERS.................$ 44.97 16.87

DEPTH PAY:

50 TO 100 FEET $1.00 PER FOOT OVER 50 FEET

101 TO 150 FEET $1.50 PER FOOT OVER 101 FEET

151 TO 200 FEET $2.00 PER FOOT OVER 151 FEET

Zone Differential (Add up Zone 1 rates):

Zone 2 - $0.85

Zone 3 - 1.25

Zone 4 - 1.70

Zone 5 - 2.00

Zone 6 - 3.00 http://www.dol.gov/whd/govcontracts

D-3

BASEPOINTS: ASTORIA, LONGVIEW, PORTLAND, THE DALLES, AND

VANCOUVER, (NOTE: All dispatches for Washington State

Counties: Cowlitz, Wahkiakum and Pacific shall be from

Longview Local #1707 and mileage shall be computed from that point.)

ZONE 1: Projects located within 30 miles of the respective city hall of the above mentioned cities

ZONE 2: Projects located more than 30 miles and less than 40 miles of the respective city of the above mentioned cities

ZONE 3: Projects located more than 40 miles and less than 50 miles of the respective city of the above mentioned cities

ZONE 4: Projects located more than 50 miles and less than 60 miles of the respective city of the above mentioned cities.

ZONE 5: Projects located more than 60 miles and less than 70 miles of the respective city of the above mentioned cities

ZONE 6: Projects located more than 70 miles of the respected city of the above mentioned cities

CARP0030-017 06/01/2021

CLALLAM, GRAYS HARBOR, ISLAND, JEFFERSON, KING, KITSAP, LEWIS,

MASON, PACIFIC (North of a straight line made by extending the north boundary line of Wahkiakum County west to the Pacific

Ocean), PIERCE, SAN JUAN, SKAGIT, SNOHOMISH, THURSTON AND

WHATCOM Counties

CARPENTER

BRIDGE CARPENTERS...........$ 49.18 19.01

CARPENTERS ON CREOSOTE

MATERIAL....................$ 47.02 19.01

CARPENTERS..................$ 49.18 19.01

DIVERS TENDER...............$ 54.54 19.01

DIVERS......................$ 103.43 19.01

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING........$ 49.58 19.01

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Hourly Zone Pay shall be paid on jobs located outside of the free zone computed from the city center of the following listed cities:

Seattle Olympia Bellingham

D-4

Auburn Bremerton Anacortes

Renton Shelton Yakima

Aberdeen-Hoquiam Tacoma Wenatchee

Ellensburg Everett Port Angeles

Centralia Mount Vernon Sunnyside

Chelan Pt. Townsend

Zone Pay:

0 -25 radius miles Free

26-35 radius miles $1.00/hour

36-45 radius miles $1.15/hour

46-55 radius miles $1.35/hour

Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

26-45 radius miles $ .70/hour

Over 45 radius miles $1.50/hour

CARP0059-002 06/01/2024

ADAMS, ASOTIN, BENTON, CHELAN (East of 120th meridian), COLUMBIA, DOUGLAS, FERRY, FRANKLIN, GARFIELD, GRANT (East of

120th meridian), KITTITAS (East of 120th meridian), LINCOLN, OKANOGAN (East of 120th meridian), PEND OREILLE, SPOKANE, STEVENS, WALLA WALLA, WHITMAN, and YAKIMA (East of 120th meridian) Counties

GROUP 1.....................$ 41.86 16.56

GROUP 2.....................$ 47.42 18.96

GROUP 3.....................$ 47.41 16.61

GROUP 4.....................$ 45.86 16.56

GROUP 5.....................$ 105.46 16.56

GROUP 6.....................$ 51.73 16.56

GROUP 7.....................$ 52.73 16.56

GROUP 8.....................$ 48.41 16.56

GROUP 9.....................$ 55.73 16.56

CARPENTER & DIVER CLASSIFICATIONS:

GROUP 1: Carpenter

D-5

GROUP 2: Millwright, Machine Erector

GROUP 3: Piledriver - includes driving, pulling, cutting, placing collars, setting, welding, or creosote treated material, on all piling

GROUP 4: Bridge, Dock, and Wharf carpenters

GROUP 5: Diver Wet

GROUP 6: Diver Tender, Manifold Operator, ROV Operator

GROUP 7: Diver Standby

GROUP 8: Assistant Diver Tender, ROV Tender/Technician

GROUP 9: Manifold Operator-Mixed Gas

ZONE PAY:

ZONE 1 0-45 MILES FREE

ZONE 2 45-100 $4.00/PER HOUR

ZONE 3 OVER 100 MILES $6.00/PER HOUR

DISPATCH POINTS:

CARPENTERS/MILLWRIGHTS: PASCO (515 N Neel Street) or Main

Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS/PILEDRIVER: SPOKANE (127 E. AUGUSTA AVE.) or Main

CARPENTERS: WENATCHEE (27 N. CHELAN) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

CARPENTERS: COEUR D' ALENE (1839 N. GOVERNMENT WAY) or Main

CARPENTERS: MOSCOW (306 N. JACKSON) or Main Post Office of established residence of employee (Whichever is closest to the worksite).

DEPTH PAY FOR DIVERS BELOW WATER SURFACE:

50-100 feet $2.00 per foot

101-150 feet $3.00 per foot

151-220 feet $4.00 per foot

221 feet and deeper $5.00 per foot

PREMIUM PAY FOR DIVING IN ENCLOSURES WITH NO VERTICAL ASCENT:

0-25 feet Free

26-300 feet $1.00 per Foot

D-6

SATURATION DIVING:

The standby rate applies until saturation starts. The saturation diving rate applies when divers are under pressure continuously until work task and decompression are complete. the diver rate shall be paid for all saturation hours.

WORK IN COMBINATION OF CLASSIFICATIONS:

Employees working in any combination of classifications within the diving crew (except dive supervisor) in a shift are paid in the classification with the highest rate for that shift.

HAZMAT PROJECTS:

Anyone working on a HAZMAT job (task), where HAZMAT certification is required, shall be compensated at a premium, in addition to the classification working in as follows:

LEVEL D + $.25 per hour - This is the lowest level of protection. No respirator is used and skin protection is minimal.

LEVEL C + $.50 per hour - This level uses an air purifying respirator or additional protective clothing.

LEVEL B + $.75 per hour - Uses same respirator protection as

Level A. Supplied air line is provided in conjunction with a chemical ""splash suit"".

LEVEL A +$1.00 per hour - This level utilizes a fully encapsulated suit with a self-contained breathing apparatus or a supplied air line.

CARP0096-002 06/01/2025

CLALLAM, GRAYS HARBOR, ISLAND, JEFFERSON, KING, KITSAP, LEWIS,

MASON, PACIFIC (North of a straight line made by extending the north boundary line of Wahkiakum County west to the Pacific

Ocean), PIERCE, SAN JUAN, SKAGIT, SNOHOMISH, THURSTON AND

WHATCOM Counties

MILLWRIGHT.......................$ 55.39 22.38

CARP0770-004 06/01/2021

WEST OF 120TH MERIDIAN FOR THE FOLLOWING COUNTIES:

D-7

CHELAN, DOUGLAS, GRANT, KITTITAS, OKANOGAN, and YAKIMA

CARPENTERS ON CREOSOTE

MATERIAL....................$ 47.02 19.01

CARPENTERS..................$ 49.18 19.01

DIVERS TENDER...............$ 54.54 19.01

DIVERS......................$ 103.43 19.01

PILEDRIVER, DRIVING,

PULLING, CUTTING, PLACING

COLLARS, SETTING, WELDING

OR CRESOTE TREATED

MATERIAL, ALL PILING........$ 49.58 19.01

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - ALL

CLASSIFICATIONS EXCEPT MILLWRIGHTS AND PILEDRIVERS

Seattle Olympia Bellingham

Auburn Bremerton Anacortes

Renton Shelton Yakima

Aberdeen-Hoquiam Tacoma Wenatchee

Ellensburg Everett Port Angeles

Centralia Mount Vernon Sunnyside

Chelan Pt. Townsend

26-35 radius miles $1.00/hour

36-45 radius miles $1.15/hour

46-55 radius miles $1.35/hour

Over 55 radius miles $1.55/hour

(HOURLY ZONE PAY: WESTERN AND CENTRAL WASHINGTON - MILLWRIGHT

AND PILEDRIVER ONLY)

Hourly Zone Pay shall be computed from Seattle Union Hall, Tacoma City center, and Everett City center

26-45 radius miles $ .70/hour

Over 45 radius miles $1.50/hour

CARP1607-010 06/01/2025

D-8

CHELAN, DOUGLAS, GRANT, KLICKITAT, KITTITAS, OKANOGAN, and

YAKIMA COUNTIES

MILLWRIGHT.......................$ 59.99 25.43

ELEC0046-001 08/05/2024

CALLAM, JEFFERSON, KING AND KITSAP COUNTIES

CABLE SPLICER....................$ 80.94 31.06

ELECTRICIAN......................$ 73.58 30.84

* ELEC0048-003 01/01/2025

CLARK, KLICKITAT AND SKAMANIA COUNTIES

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 63.50 29.73

HOURLY ZONE PAY:

Portland, The Dalles, Hood River, Tillamook, Seaside and

Astoria

Zone 1: 31-50 miles $1.50/hour

Zone 2: 51-70 miles $3.50/hour

Zone 3: 71-90 miles $5.50/hour

Zone 4: Beyond 90 miles $9.00/hour

*These are not miles driven. Zones are based on Delorrne

Street Atlas USA 2006 plus.

ELEC0048-029 01/01/2025

COWLITZ AND WAHKIAKUM COUNTY

CABLE SPLICER....................$ 44.22 21.50

ELECTRICIAN......................$ 63.50 29.73

D-9

ELEC0073-001 07/01/2025

ADAMS, FERRY, LINCOLN, PEND OREILLE, SPOKANE, STEVENS, WHITMAN

COUNTIES

CABLE SPLICER....................$ 34.10 16.68

ELECTRICIAN......................$ 49.55 19.09

ELEC0076-002 08/31/2025

GRAYS HARBOR, LEWIS, MASON, PACIFIC, PIERCE, AND THURSTON

COUNTIES

CABLE SPLICER....................$ 71.65 26.76

ELECTRICIAN......................$ 65.14 26.56

ELEC0112-005 06/01/2025

ASOTIN, BENTON, COLUMBIA, FRANKLIN, GARFIELD, KITTITAS, WALLA

WALLA, YAKIMA COUNTIES

CABLE SPLICER....................$ 63.00 27.87

ELECTRICIAN......................$ 60.00 27.78

ELEC0191-003 06/01/2022

ISLAND, SAN JUAN, SNOHOMISH, SKAGIT AND WHATCOM COUNTIES

CABLE SPLICER....................$ 44.23 17.73

ELECTRICIAN......................$ 53.20 27.51

ELEC0191-004 06/01/2018

CHELAN, DOUGLAS, GRANT AND OKANOGAN COUNTIES

CABLE SPLICER....................$ 40.82 17.63

ELECTRICIAN......................$ 42.45 21.34

ENGI0302-092 06/01/2025

D-10

KING AND SNOHOMISH COUNTIES

POWER EQUIPMENT OPERATOR

Group 1.....................$ 61.93 27.57

Group 1A....................$ 62.85 27.57

Group 1AA...................$ 63.75 27.57

Group 1AAA..................$ 64.66 27.57

Group 2.....................$ 61.14 27.57

Group 3.....................$ 60.46 27.57

Group 4.....................$ 56.63 27.57

POWER EQUIPMENT OPERATORS CLASSIFICATIONS

Group 1AAA

Cranes: 300 tons and over or 300’ of boom including jib with attachments; Cranes Friction: 200 tons and over; Tower

Cranes: over 250’ in height from base to boom.

Group 1AA

Cranes: 200 tons- 299 tons, or 250’ of boom including jib with attachments; Cranes: Friction cranes through 199 tons;

Leverman; Shovel, Excavator, Backhoes: over 90 metric tons;

Tower Crane: over 175’ through 250’ in height, base to boom.

Group 1A

Cranes: 100 tons through 199 tons, or 150’ of boom (including jib with attachments); Drilling Machine; Overhead, bridge type: 100 tons and over; Tower Crane: up to 175’ in height base to boom; Loader: Overhead 8 yards & over; Shovel, Excavator, Backhoes: over 50 metric tons and up to 90 metric tons; Mechanics.

Group 1

Asphalt plant Operators; Cableways; Concrete Pump: Truck mount with boom attachment over 42M; Cranes: 45 tons through 99 tons, under 150’ of boom (including jib with attachments); Overhead, bridge type: 45 tons through 99 tons; Derricks: on building work; Hard Tail End Dump:

articulating off-road equipment 45 yards & over; Loader:

Overhead 6 yards but not including 8 yards; Motor Patrol

Graders; Mucking Machine, Mole, Tunnel Drill, Boring, Road

Header and/or Shield; Quad 9, HD 41, D10 and over; Remote

Control Operator on rubber tired earth moving equipment;

Rollagon; Scrapers, self-propelled: 45 yards and over;

Spreader: Topsider & Screedman; Shovel, Excavator, Backhoe:

over 30 metric tons and up to 50 metric tons; Slipform

Pavers; Transporters: all track or truck type; Welder.

Group 2

Batch Plant Operator: concrete; Barrier Machine: (Zipper);

D-11

Bump Cutter; Cranes: 20 tons through 44 tons with attachments; Overhead, bridge type Crane: 20 tons through

44 tons; Chipper; Concrete Pump: truck mount with boom attachment up to 42M; Crusher; Deck Engineer/Deck Winches

(Power); Grade Engineer: using blue prints, cut sheets, etc.; -Finishing Machine: Bidwell and Gamaco & Similar

Equipment; Guardrail Punch; Hard Tail End Dump:

articulating off-road equipment under 45 yards;

Horizontal/Directional Drill Operator; Loaders: Overhead under 6 yards; Loaders: Plant Feed; Locomotives: all;

Material Transfer Device; Piledriver: (other than crane mount); Quick Tower: no cab, under 100 feet in height base to boom; Roto-Mill, Roto-Grinder; Shovel, Excavator, Backhoe, Tractor: 15 to 30 metric tons; Subgrader Trimmer;

Scraper: self propelled under 45 yards; Truck Crane

Oiler/Driver: 100 tons and over; Truck Mount Portable

Conveyor; -Vac Truck (Vactor Guzzler, Hydro Excavator); Yo

Yo Pay Dozer.

Group 3

Cranes: through 19 tons with attachments, A-frame over 10 tons; Concrete Pump: Mounted or trailer high pressure line pump, pump high pressure; Conveyors; Dozers: D-9 & under;

Drill Oilers: auger type, truck or crane mount; Forklift:

3000 lbs and over with attachments; Horizontal/Directional

Drill Locator; Outside Hoists (Elevators and Manlifts), Air

Tuggers, Strato; Tower Bucket Elevators; Hydralifts/Boom trucks: over 10 tons; Loaders: elevating type belt; Plant

Oiler: asphalt, crusher; Rigger/Signal Person, Bellman

(Certified); Roller: plant mix or multi-lift materials;

Saws: Concrete; Scrapers: concrete & carry all Service

Engineers: equipment; Trenching Machines; Truck Crane

Oiler/Driver: under 100 tons; Shovel, Excavator, Backhoe, Tractors: under 15 metric tons.

Group 4

Assistant Engineer; Bobcat; Brooms; Compressor; Concrete

Finish Machine: Laser Screed; Cranes, A-frame: 10 tons and under; Elevator and man-lift: permanent and shaft type;

Forklifts: under 3000 lbs. with attachments;

Gradechecker/Stakeman; Hydralifts/Boom Trucks: 10 tons and under; Oil distributors, Blower Distribution & Mulch

Seeding Operator; Pavement Breaker; Posthole Digger:

mechanical; Power Plant; Pumps: water; -Rigger and Bellman;

Roller: other than plant mix; Wheel Tractors: Farm all type; Shotcrete/Gunite Equipment; Brokk: Remote demolition equipment

ENGI0302-093 06/01/2025

SKAGIT AND WHATCOM COUNTIES

D-12

Group 1.....................$ 61.47 27.57

Group 1A....................$ 62.39 27.57

Group 1AA...................$ 63.29 27.57

Group 1AAA..................$ 64.19 27.57

Group 2.....................$ 60.69 27.57

Group 3.....................$ 60.02 27.57

Group 4.....................$ 56.19 27.57 with attachments; Cranes: Friction cranes through 199 tons;

jib with attachments); Drilling Machine; Overhead, bridge type: 100 tons and over; Tower Crane: up to 175’ in height base to boom; Loader: Overhead 8 yards & over; Shovel, mount with boom attachment over 42M; Cranes: 45 tons through 99 tons, under 150’ of boom (including jib with attachments); Overhead, bridge type: 45 tons through 99 tons; Derricks: on building work; Hard Tail End Dump:

articulating off-road equipment 45 yards & over; Loader:

Overhead 6 yards but not including 8 yards; Motor Patrol

Graders; Mucking Machine, Mole, Tunnel Drill, Boring, Road

Header and/or Shield; Quad 9, HD 41, D10 and over; Remote

Control Operator on rubber tired earth moving equipment;

Rollagon; Scrapers, self-propelled: 45 yards and over;

Spreader: Topsider & Screedman; Shovel, Excavator, Backhoe:

Bump Cutter; Cranes: 20 tons through 44 tons with attachments; Overhead, bridge type Crane: 20 tons through

44 tons; Chipper; Concrete Pump: truck mount with boom

D-13 attachment up to 42M; Crusher; Deck Engineer/Deck Winches

(Power); Grade Engineer: using blue prints, cut sheets, etc.; -Finishing Machine: Bidwell and Gamaco & Similar

Equipment; Guardrail Punch; Hard Tail End Dump:

articulating off-road equipment under 45 yards;

Horizontal/Directional Drill Operator; Loaders: Overhead under 6 yards; Loaders: Plant Feed; Locomotives: all;

Material Transfer Device; Piledriver: (other than crane mount); Quick Tower: no cab, under 100 feet in height base to boom; Roto-Mill, Roto-Grinder; Shovel, Excavator, Backhoe, Tractor: 15 to 30 metric tons; Subgrader Trimmer;

Scraper: self propelled under 45 yards; Truck Crane

Oiler/Driver: 100 tons and over; Truck Mount Portable tons; Concrete Pump: Mounted or trailer high pressure line pump, pump high pressure; Conveyors; Dozers: D-9 & under;

Drill Oilers: auger type, truck or crane mount; Forklift:

3000 lbs and over with attachments; Horizontal/Directional

Drill Locator; Outside Hoists (Elevators and Manlifts), Air

Tuggers, Strato; Tower Bucket Elevators; Hydralifts/Boom trucks: over 10 tons; Loaders: elevating type belt; Plant

Oiler: asphalt, crusher; Rigger/Signal Person, Bellman

(Certified); Roller: plant mix or multi-lift materials;

Saws: Concrete; Scrapers: concrete & carry all Service

Engineers: equipment; Trenching Machines; Truck Crane

Finish Machine: Laser Screed; Cranes, A-frame: 10 tons and under; Elevator and man-lift: permanent and shaft type;

Forklifts: under 3000 lbs. with attachments;

Gradechecker/Stakeman; Hydralifts/Boom Trucks: 10 tons and under; Oil distributors, Blower Distribution & Mulch

Seeding Operator; Pavement Breaker; Posthole Digger:

mechanical; Power Plant; Pumps: water; -Rigger and Bellman;

Roller: other than plant mix; Wheel Tractors: Farm all

ENGI0302-094 06/01/2025

KITSAP COUNTY

D-14

Group 1.....................$ 60.93 27.57

Group 1A....................$ 61.83 27.57

Group 1AA...................$ 62.73 27.57

Group 1AAA..................$ 63.62 27.57

Group 2.....................$ 60.14 27.57

Group 3.....................$ 59.49 27.57

Group 4.....................$ 55.68 27.57 with attachments; Cranes: Friction cranes through 199 tons;

jib with attachments); Drilling Machine; Overhead, bridge type: 100 tons and over; Tower Crane: up to 175’ in height base to boom; Loader: Overhead 8 yards & over; Shovel, mount with boom attachment over 42M; Cranes: 45 tons through 99 tons, under 150’ of boom (including jib with attachments); Overhead, bridge type: 45 tons through 99 tons; Derricks: on building work; Hard Tail End Dump:

articulating off-road equipment 45 yards & over; Loader:

Overhead 6 yards but not including 8 yards; Motor Patrol

Graders; Mucking Machine, Mole, Tunnel Drill, Boring, Road

Header and/or Shield; Quad 9, HD 41, D10 and over; Remote

Control Operator on rubber tired earth moving equipment;

Rollagon; Scrapers, self-propelled: 45 yards and over;

Spreader: Topsider & Screedman; Shovel, Excavator, Backhoe:

Bump Cutter; Cranes: 20 tons through 44 tons with attachments; Overhead, bridge type Crane: 20 tons through

44 tons; Chipper; Concrete Pump: truck mount with boom attachment up to 42M; Crusher; Deck Engineer/Deck Winches

(Power); Grade Engineer: using blue prints, cut sheets, etc.; -Finishing Machine: Bidwell and Gamaco & Similar

D-15

Equipment; Guardrail Punch; Hard Tail End Dump:

articulating off-road equipment under 45 yards;

Horizontal/Directional Drill Operator; Loaders: Overhead under 6 yards; Loaders: Plant Feed; Locomotives: all;

Material Transfer Device; Piledriver: (other than crane mount); Quick Tower: no cab, under 100 feet in height base to boom; Roto-Mill, Roto-Grinder; Shovel, Excavator, Backhoe, Tractor: 15 to 30 metric tons; Subgrader Trimmer;

Scraper: self propelled under 45 yards; Truck Crane

Oiler/Driver: 100 tons and over; Truck Mount Portable tons; Concrete Pump: Mounted or trailer high pressure line pump, pump high pressure; Conveyors; Dozers: D-9 & under;

Drill Oilers: auger type, truck or crane mount; Forklift:

3000 lbs and over with attachments; Horizontal/Directional

Drill Locator; Outside Hoists (Elevators and Manlifts), Air

Tuggers, Strato; Tower Bucket Elevators; Hydralifts/Boom trucks: over 10 tons; Loaders: elevating type belt; Plant

Oiler: asphalt, crusher; Rigger/Signal Person, Bellman

(Certified); Roller: plant mix or multi-lift materials;

Saws: Concrete; Scrapers: concrete & carry all Service

Engineers: equipment; Trenching Machines; Truck Crane

Finish Machine: Laser Screed; Cranes, A-frame: 10 tons and under; Elevator and man-lift: permanent and shaft type;

Forklifts: under 3000 lbs. with attachments;

Gradechecker/Stakeman; Hydralifts/Boom Trucks: 10 tons and under; Oil distributors, Blower Distribution & Mulch

Seeding Operator; Pavement Breaker; Posthole Digger:

mechanical; Power Plant; Pumps: water; -Rigger and Bellman;

Roller: other than plant mix; Wheel Tractors: Farm all

ENGI0302-095 06/01/2025

CHELAN(WEST OF THE 120TH MERIDIAN), CLALLAM, DOUGLAS(WEST OF

THE 120TH MERIDIAN), GRAYS HARBOR, ISLAND, JEFFERSON,

KITTITAS(WES…