47PD0317R0020_Bryan_&_Bostetter_Courthouses_CFM_solicitation_section_J_with_exhibits.pdf

J. LIST OF ATTACHMENTS (LIST OF DOCUMENTS, EXHIBITS AND OTHER

ATTACHMENTS)

EXHIBIT J1 REFERENCES AND PUBLICATIONS

EXHIBIT J2 QUALITY ASSURANCE SURVEILLANCE PLAN (QASP)

EXHIBIT J3 BUILDING OPERATING PLAN STANDARDS

EXHIBIT J4 GREEN PURCHASING REPORTING

EXHIBIT J5 GSA MANDATORY KSPS AND ENVIRONMENTAL

SUSTAINABLE PRODUCTS

EXHIBIT J6 CONTRACTOR SUBMITTALS CHART

EXHIBIT J7 WAGE DETERMINATION

ATTACHMENT J1 ELECTRONIC OFFER SHEET

ATTACHMENT J2 PRIOR EXPERIENCE COVER LETTER

ATTACHMENT J3 ELECTRONIC OFFER SHEET

ATTACHMENT J4 GSA FORM 527

Exhibit J1 References and Publications

The following publications are incorporated by reference as setting quality, performance, and design standards for work required in this document. Unless a specific date is provided, references are for the current edition published at the time of issue of the solicitation, to include any addenda or errata published by the issuing organization. The Contractor is responsible for obtaining all referenced documents at its expense, with the exception of the Public Buildings Service Operations and Maintenance Standards Guides, the Facilities Standards for the Public Buildings Service (PBS P100), and the U.S. Courts Design Guide, which will be provided by the Government.

Public Buildings Service Operations and Maintenance Standards Draft

● Facilities Standards for the Public Buildings Service (PBS P100)

● U.S. Courts Design Guide

● SMACNA Sheet Metal and Air Conditioning Contractors National Association HVAC

Systems Testing, Adjusting & Balancing

● AHERA Asbestos Hazard Emergency Response Act

● ASHRAE Guideline 1 HVAC Commissioning Process

● ASHRAE Guideline 4 Preparation of Operating and Maintenance Documentation for

Building Systems

● ANSI/ASHRAE Standard 15 Safety Code for Mechanical Refrigeration

● ANSI/ASHRAE Standard 34 Number Designation and Safety Classification of

Refrigerants

● ANSI/ASHRAE Standard 55, Thermal Environmental Conditions for Human Occupancy

● ANSI/ASHRAE Standard 62, Ventilation for Acceptable Indoor Air Quality

● ANSI/ASHRAE Standard 100, Energy Conservation in Existing Buildings/Commercial

● ANSI/ASHRAE Standard 111, Practices for Measurement, Testing, Adjusting, &

Balancing of Building Heating, Ventilation, Air-Conditioning, and Refrigeration Systems;

● ASME Boiler and Pressure Vessel Code

● ASME CSD-1 Control and Safety Devices of Automatically Fired Boilers

● National Board of Boiler and Pressure Vessel Inspectors, National Board Inspection Code

● OSHA 29 CFR 1910 and 29 CFR1926

● CSI Master Format

● Clean Air Act

● Clean Water Act

● EPA Green Book

● EPA Purple Book

● FMR Federal Management Regulations

● GSA SEMS Sustainable Environmental Management System (GSA.GOV/SEMS)

● International Building Code

● International Fire Code

● International Plumbing Code

● International Mechanical Code

● NETA Maintenance Testing Specification for Electrical Power Distribution Equipment and Systems

● NFPA 10, Standard for Portable Fire Extinguishers

● NFPA 12, Carbon Dioxide Extinguishing Systems

● NFPA 12A, Standard on Halon 1301 Fire Extinguishing Systems

● NFPA 13, Installation of Sprinkler Systems

● NFPA 17, Dry Chemical Extinguishing Systems

● NFPA 17A,Wet Chemical Extinguishing Systems

● NFPA 25, Standard for the Inspection, Testing, and Maintenance of Water-Based Fire

Protection Systems

● NFPA 70, National Electrical Code (NEC)

● NFPA 70E,Standard for Electrical Safety in the Workplace

● NFPA 72, National Fire Alarm Code

● NFPA 80, Standard for Fire Doors and Other Opening Protectives

● NFPA 85, Boiler and Combustible Systems Hazards Code

● NFPA 92A, Standard for Smoke Control Systems Utilizing Barriers and Pressure

Differences

● NFPA 92B, Standard for Smoke Management Systems in Malls, Atria, and Large Spaces

● NFPA 96, Standard for Ventilation Control and Fire Protection of Commercial Cooking

Operations

● NFPA 101, Life Safety Code

● NFPA 105, Standard for the Installation of Smoke Door Assemblies and Other Opening

Protectives

● NFPA 110, Standard for Emergency and Standby Power Systems

● NFPA 111, Standard on Stored Electrical Energy Emergency and Standby Power

Systems

● NFPA 2001, Standard on Clean Agent Fire Extinguishing Systems

● NICET National Institute for Certification in Engineering Technologies publications and issuances

● NIOSH National Institute for Safety and Health publications and issuances

● DOE/EE-0157, International Performance Measurement and Verification Protocol

● R.S. Means Facilities Construction Cost Data

● USGBC LEED for Existing Buildings (LEED-EB)

● NEMA TP-1, National Electrical Manufacturers Association, Guide for Determining

Energy Efficiency for Distribution Transformers

● NEMA MG-1. National Electrical Manufacturers Association, Motors and Generators

● NEMA Application Guide for AC Adjustable Speed Drive Systems

● ANSI/IWCA I-14.1, Window Cleaning Safety Standard

● Safe Drinking Water Act, PL 99-339, as amended

● Title 40 CFR, Part 761, PCBs in Electrical Transformers

● Title 40 CFR, 141.43, Sections A and D, Environmental Protection Agency Safe

Drinking Water http://www.nema.org/stds/tp1.cfm#download http://www.nema.org/stds/tp1.cfm#download

Exhibit J2 Quality Assurance Surveillance Plan (QASP)

This Quality Assurance Surveillance Plan (QASP) is provided as an example. A full QASP is anticipated to be developed after the award of the contract. The Government reserves the right to edit, modify, or replace this plan at any time or for any reason.

INTRODUCTION

This Quality Assurance Surveillance Plan (QASP) is designed to provide the General Services Administration (GSA) with an effective surveillance method of monitoring and evaluating the Contractor's performance under a Performance-Based Statement of Work (PBSOW) for Integrated Facilities Engineering, Operation, Maintenance, Custodial and Related Services.

In accordance with Federal Acquisition Regulation (FAR) Part 37.601, performance-based contracting methods are intended to ensure that the required performance quality levels are achieved and that the total payment is related to the degree that services performed or outcomes achieved meet contract standards. GSA’s role in quality assurance is to ensure that the Contractors are achieving the quality levels established in the Integrated Facilities Engineering, Operation, Maintenance, Custodial and Related Services contract and focuses on the Contractor's’ QCP. GSA periodically validates the execution of the Contractor's quality control programs by reviewing such areas as the Contractor's inspection forms, service request logs, tenant reports, tenant satisfaction surveys, and the timeliness of corrective actions.

A. PURPOSE OF THE QASP

The QASP is intended to accomplish the following:

● Define the roles and responsibilities of participating Government officials.

● Identify the performance objectives based upon the PBSOW in accordance with FAR

Part 46.401(a) (1).

● Identify the performance quality level standards in accordance with FAR Part 37.601(a)

(2).

● Describe the methods of surveillance for GSA to identify quality levels in accordance with FAR Part 46.401(a) (2).

● Establish a method to provide feedback to the Contractor regarding quality and timeliness of the service performance, i.e., copies of inspection forms, copies of tenant reports, data on tenant satisfaction scores; and any other drivers or measures of performance that are required by the CO or COR.

● Establish timeframes for communication and performance improvement if needed.

● Establish specific procedures for changes to the contract price when services are not performed or do not meet contract requirements in accordance to FAR Part 37.601(a) (3).

● Ensure the Contractor has developed and implemented a QCP establishing procedures and responsibilities for controlling the quality of work performed.

B. ROLES AND RESPONSIBILITIES OF GOVERNMENT OFFICIALS

The following Government officials will participate in assessing the quality of the Contractor's performance. Their roles and responsibilities are described as follows:

1. A person designated by the CO will serve as the COR. The COR is responsible for monitoring, assessing, recording, and reporting on the performance of the Contractor. The COR shall have the primary responsibility for completing forms that will be used to evaluate the Contractor’s performance. In addition, the COR shall use the Contractor Performance System (CPS) to document the Contractor’s performance

2. The Contracting Officer, or person designated as the CO, will have overall responsibility for overseeing the Contractor's performance. The CO shall be responsible for monitoring the Contractor's performance in the areas of contract compliance and contract administration.

The CO will review the COR's written inspections and assessments of the Contractor’s performance and resolve any discrepancies that may arise between the Contractor and COR.

In addition, the CO shall use the Contractor Performance System (CPS) to document the Contractor’s performance.

C. TYPES OF WORK TO BE PERFORMED

All work under the scope of this contract is subject to Government evaluations. The Contractor’s performance in providing the following Facilities Engineering, Operation, Maintenance, Custodial and Related Services shall be evaluated by the Government:

● Existing deficiency list

● Building operating plan

● Equipment inventory

● Monthly progress reports

● Reference library

● Building management support services

● Operational requirements

● Service requests

● Tours

● Maintenance program

● Water treatment

● Oil analysis

● Lamp and ballast replacements

● Repairs

● Safety and environmental

● Fire Protection and Life Safety equipment and systems

● Custodial Standard Services:

A. Interior B. Exterior C. Snow and Ice Removal D. Grounds Maintenance

● Above Standard Services

● Service Calls

● Trash and Solid Management

● Recycling

● Integrated Pest Management Plan

● Other services as identified in Section C

D. METHODS OF SURVEILLANCE

The method of surveillance is based on the performance criteria of the contract terms and specifications. Each requirement will describe the tasks to be performed and the standard for successful performance. GSA intends to monitor and evaluate the Contractor's performance based on any or all of the following surveillance methods, or other methods, as determined by the Government:

1. Periodic Surveillance Inspections: This method consists of selected surveillance tasks by the Government. Surveillance tasks does not constitute 100 percent inspection, but rather, are performed on a random basis. The COR will evaluate the Contractor’s reports, surveys, etc. on a weekly, biweekly, monthly, or quarterly basis.

2. Tenant Interviews: All tenant concerns received through the COR will be documented and evaluated on a planned schedule developed by the COR. This method may help the COR focus on areas that may require further action from the CO.

3. Service Request Documentation: This method of surveillance will provide information to the COR, such as identification of the types of service requests received, the frequencies of service requests, corrective action taken, timeliness of completion, and any other pertinent data. At a minimum, this method must be performed on a monthly basis.

4. Tenant Satisfaction Surveys: The Gallup Organization conducts surveys for one-third of GSA’s tenants in Government-owned and leased buildings. These surveys gather important data in many areas, including specific categories pertaining to the operation and maintenance of GSA's buildings. The surveys provide the COR with satisfaction scores that can be further evaluated to determine if there are any weaknesses within the various programs. There are various measures that can be taken, such as reviewing the survey’s comments, obtaining further feedback from the tenants, or sharing the scores with the Contractor to establish a plan of action.

Exhibit J3- Building Operating Plan Standards

The building operating plan must contain:

1. Contact information (local and corporate).

2. Description of staffing, responsibilities, and work schedules.

3. Standard operating procedures for operating building systems, to include as a minimum:

a. Startup and shutdown times and procedures relative to various environmental conditions.

b. Procedures to accommodate tenant overtime utility requests.

c. Peak load demand management procedures (if applicable).

d. Other operating strategies to maximize efficiency and minimize energy consumption.

e. Descriptions of major mechanical equipment and sequences of operations for equipment systems.

f. Locations of all major utility shutoffs, including gas, electric, and water.

g. Locations of all electric rooms and a narrative of the areas served by each.

4. Tour procedures.

5. Maintenance schedules, procedures, and a reference to which preventive or predictive maintenance standards or guides the Contractor will use.

6. List of test equipment to be maintained onsite to support troubleshooting, sensor calibrations, etc.

7. A description of how building equipment data is maintained and updated in the CMMS.

Service request and repair procedures, to include staffing and procedures for the service request function, if applicable.

8. Reference the location or incorporate contingency plans for:

a. Loss of the Contractor’s onsite personnel (i.e., strike, walkout, injury, abrupt resignation).

b. Civil disturbance or other major security threat.

c. Natural disasters, bombing, or other event that damages the building’s structure or utilities.

d. Floods, including flooding caused by plumbing breaks.

e. Hazardous materials leaks or spills. (SPCC plan etc)

f. Utilities.

g. Interoperability and impairment of fire protection and life safety systems

(including fire watch and impairment procedures (e.g., red tags, etc.).

h. Other contingency plans as necessary to support the Government’s continuity of operations planning for the site.

9. Description of Air Quality Management District and other environmental regulatory requirements (e.g., which rules apply to equipment in the building, which permits are necessary, inspection and certification requirements, etc.).

10. Description of demand response or utility curtailment programs in which the building participates, to include communications protocols and curtailment activities.

Exhibit J4- Biobased Purchases Reporting

Annual Contractor Reporting of Designated Biobased Purchases Annual Contractor Reporting of Designated Bio-based Purchases

Section 9002 of the ‘Farm Security and Rural Investment Act of 2002,’ as amended by the ‘Food, Conservation, and Energy Act of 2008, Pub. L. 110-246 (the Farm Bill)’ requires Federal agencies to give a procurement preference to USDA-designated bio-based products and requires agency Contractors to report such purchases under service and construction contracts. The Federal Acquisition Regulation (FAR) Council subsequently published a bio-based final rule at 77 FR 23365, implementing the reporting requirement in FAR 52.223-2, ‘Affirmative Procurement of Bio-based Products Under Service and Construction Contracts’ with an effective date of May 18, 2012. To facilitate collection of report data, the FAR is amended based on final rule 78 FR 46794, which requires contractors to submit their biobased reports to https://www.sam.gov/.

To comply with the reporting provisions of the Act, the Contractor shall file an annual report on purchases of designated bio-based products used under the performance of this contract.

Where To Submit:

CY 2013 No later than October 31st in accordance with final rule 78 FR 46794 ‘Update to Biobased Reporting Requirement’ the Contractor is responsible for submitting their annual biobased report using the following web site https://www.sam.gov/.

● Note: US Department of Agriculture (USDA) Biobased products http://www.biopreferred.gov/ProductCategories.aspx

Green Purchases In addition to those regulatory requirements specified in Section C of the specification, the following considerations and sources shall be used by the Contractor.

This includes:

1. Compliance with appropriate clauses and subparts of FAR 7, 11, 12, 13, and 23.

2. Cleaning chemicals, tools, equipment, supplies, or materials that shall be selected with consideration to minimizing the impact on both human health and safety as well as reducing other potential environmental impacts.

3. Cleaning processes, work practices, and procedures shall minimize exposures to workers and building occupants and contribute to the promotion of environmental stewardship.

4. GSA offers a variety of environmental products to its Federal customers to assist in their efforts to comply with procurement responsibilities outlined in Federal environmental laws and regulations. Information is available through the GSA Federal Acquisition Service (FAS). https://gsa.gov/portal/category/21145 (This Is A SourceAmerica Contract)

5. Additional information on environmentally preferable products may be found through sources such as the U.S. EPA’s Environmentally Preferable Purchasing Program’s website: https://www.epa.gov/greenerproducts/about-environmentally-preferable-purchasing-program https://www.sam.gov/ https://www.sam.gov/ http://www.biopreferred.gov/ProductCategories.aspx https://gsa.gov/portal/category/21145 https://gsa.gov/portal/category/21145 https://www.epa.gov/greenerproducts/about-environmentally-preferable-purchasing-program https://www.epa.gov/greenerproducts/about-environmentally-preferable-purchasing-program https://www.epa.gov/greenerproducts/about-environmentally-preferable-purchasing-program https://www.epa.gov/greenerproducts/about-environmentally-preferable-purchasing-program

Exhibit J5- GSA mandatory ksps and environmental sustainable products

The following is chart depicting available sustainability products to meet the requirements of section H.23.

Recycle Content

Ecologo DfE Biobased

Green Seale

Product Use Preferable Contents Contents to Avoid & CPG

*Acoustical Ceiling Tile

Adhesive - Aerosol Rubber-based; low-VOC

SARA 313 chemicals (cyclohexane, hexane, methylene chloride); petroleum distillates; CFCs ü X

Adhesive - Epoxy Non-toxic; low-VOC Isopropyl alcohol; SARA 313 chemicals (toluene) ü X

Adhesive Remover

Soy-based mixture; citrus extract; low-VOC Aerosol; petroleum distillates ü ü

Coil Cleaner

Non-acid cleaners with non-toxic, biobased contents;

low-VOC; if acid must be used acetic or phosphoric acid are preferable

Sulfuric acid, hydrofluoric acid, or similar caustic chemicals. SARA 313 chemicals (trichloroethylene) ü ü

*Concrete Ready Mix

Water-based, latex-based, or biobased sealers; low-VOC

Acrylonitrile; SARA 313 chemicals (n-methyl-2-pyrrolidone) ü ü

Wood Sealer Water-based, latex-based, or biobased sealers; low-VOC

Acrylonitrile; SARA 313 chemicals (n-methyl-2-pyrrolidone)

Degreaser Water or biobased (soy) degreasers; non-toxic; non-aerosol; low-VOC

Aerosol; petroleum distillates ü ü

Deicer (Road and Windshield)

Biodegradable windshield deicer; salt-free ice melt;

magnesium chloride or calcium chloride; calcium magnesium or magnesium acetate

SARA 313 chemicals (methanol, isopropyl alcohol, ethylene glycol); aerosol;

sodium chloride ü ü

Descaler Enzyme-based descaler;

urea; trisodium phosphate;

low-VOC

Hydrochloric (muriatic) acid or similar caustic compounds (oxatic or hydrofluoric acid);

sodium hypochlorite ü ü

Fuel Additive Biobased; non-toxic Petroleum distillates ü ü Graffiti Remover

Biobased content (soy/corn);

low-VOC

SARA 313 chemicals (toluene, xylene); acetone; isopropyl alcohol ü ü*

Grease / Lubricant

Biodegradable/biobased content (soy or vegetable oil); non-toxic; re-refined lubricating oils; low-VOC

Petroleum or mineral-based oils; metallic soaps or polyurea derivatives; sulfur, chlorine, zinc; amine phosphate or other irritants ü ü

*Gypsum Board

Light Bulbs Energy Star or FEMP fluorescent bulbs or tubes;

reduced mercury content

Mercury N/A

N/A

*Nylon Carpet

Mastic Water or acrylic-based; non-toxic; low-VOC

Petroleum-distillates (mineral spirits) ü X

*Interior Paint Remanufactured or recycled paint; water-based or latex-based; low-VOC

Aerosol; oil-based (alkyd) paints (mineral spirits, aliphatic hydrocarbons); SARA 313 chemicals (toluene, xylene, ü X ethyl benzene); acetone

Paint Remover Biobased; non-toxic; low-

VOC

SARA 313 chemicals (n-methyl-2-pyrrolidone, methanol, methylene chloride);

isopropyl alcohol ü ü*

Spray Foam CFC-free; biobased (soy);

low-VOC

HCFCs; SARA 313 chemicals (formaldehyde)

X ü * ü Product available and offered through GSA Advantage ü* Product available, but not currently offered through GSA Advantage X Product currently not available a - On the GSA Advantage website some environmental product indicators, such as ‘Non-Toxic’ and ‘Biobased’, are specified by the product vendor and have not been independently verified. Prior to procurement, it is important to examine the Material Safety

Exhibit J6- Contractor Submittals Chart

The following chart is provided for reference only. It does not define all requirement of the contract, only those submittals and some of the documentation requirements for ease of administration. Any inconsistencies between this chart and section C shall default to the language contained in section C.

Deliverable Referen ce

Deliverable Due Point of Contact

Electronic Offer Sheet (pricing))

B.2 Due in proposal package CO

Initial deficiency list C.5 The Contractor must develop and submit fifteen (15) days prior to the start of the contract.

COR or designee.

List of key personnel and emergency contact information, which may include subcontractor contacts as applicable.

C.9.1 The Contractor must develop and submit to the COR within 10 calendar days of award.

CO, COR or designee.

Quality Control Plan. C.9.5 & C.53

Submitted as part of the Proposal Package as part of the Management Plan. Final QCP developed and submitted for approval by the start of the contract and maintained continuously.

CO and COR.

Building Operating Plan.

C.10 Develop and submit for approval not later than 30 days after the start of the contract. Revise and update at a minimum annually.

COR or designee.

Equipment inventory. C.11 The Contractor must update and verify the equipment inventory on an ongoing basis during the performance of the contract.

COR or designee.

Monthly progress reports.

C.12 On a monthly basis. COR or designee.

Equipment Repair Assessment.

C.14 On an ongoing basis during the performance of the contract.

COR or designee.

Emergency service request and callback repair plan report.

C.22.2 Written accounting of any emergency callback the morning of the next working day.

COR or designee.

Routine service request

- extension

C.22.4 Contractor must immediately notify with a written extension request if the 24 hour period will be exceeded.

COR or designee.

Identify all alarm points with originating point identification information.

C.25 Within the first 30 days after the start of the contract.

COR or designee.

Initial analysis report and development of water treatment program.

C.32.3 Analysis due within the first month of the contract. The full water treatment plan must be finalized within 3 months.

COR or designee.

Monthly water treatment testing or makeup water chemical tracking.

C.32.4 Monthly COR or designee.

Periodic oil analysis. C.33.1 At least annually, with results submitted within the next monthly progress report.

COR or designee.

Lamps and ballasts containing mercury record.

C.34 Document monthly all purchases of mercury-containing lamps within the monthly progress report.

COR or designee.

Repairs using subcontractors.

C.36.6 Must provide justification for subcontract need in advance.

Scheduling and recordkeeping of permits, personnel safety, control of hazardous substances, certifications, and records.

C.37.2 Maintain records and furnish copies as requested.

COR or designee.

Refrigerant control and certification log.

C.37.3 Refrigerant control logs must be updated and inspected as required.

AQMD operating permits.

C.37.4 Copies made available immediately upon request.

COR or designee.

UST Testing and Record Keeping

C.37.5 The records of inspection must be maintained and available for inspection by regulatory officials.

COR or designee

Workplace safety plan C.37.8 A safety and health plan must be submitted for review and approval within 30 days after award.

COR or designee.

Hazardous materials:

material safety data sheets – hazardous materials inventory.

C.37.15 SDSs must be made available on request. The Contractor must prepare and submit hazardous materials inventory as an appendix to the building operating plan. This must be updated and resubmitted annually by September 30 of each year.

COR or designee.

Backflow prevention devices – annual inspection certificate.

C.37.17 Annually. COR or designee.

Annual Potable Water Testing

C.37.19 Annually. COR or designee.

Annual Roof Anchorage recertification/inspectio n

C.37.25 Must provide recertification of anchor points in first year, with inspection each year thereafter.

Using subcontractors C.43 Must provide justification for subcontract need in advance.

COR or designee.

Scheduled periodic maintenance of Elevators and Escalators

C.41.2 Within five (5) calendar days prior to the contract starting date. See also ‘Reporting Requirements’ in the same section for additional info.

COR or designee.

Cleaning Schedule C.44 Preliminary schedule due 30 days prior to the contract start date. The final cleaning plan is due by the start of contract. The cleaning schedule shall be updated continuously. Changes require prior approval of COR.

COR or designee.

Green Cleaning Plan C.45 & C.46.4

Final plan due no later than thirty (30) calendar days prior to start of contract.

COR or designee.

Green Purchase Reports & KSP Product Purchase Compliance -Bio-based as Required by USDA (see Exhibit 4) - Non Bio-based (see Exhibit 5)

C.46.2 &

C.53.7

Green Purchase Reports- Annually by 31 October.

KSP Compliance Report- Annually at the contract renewal date.

COR or designee.

Snow Removal Plan C.47.3 Initial plan due by October 15th.

Updated annually in conjunction with option renewal.

COR or designee.

Window Washing Safety Plan

C.47.2.3 Within thirty (30) days of the contract start date.

COR or designee.

Waste Hauling Report C.51.4 Previous months results are due by the 15th of each month and upon request by the CO or their designee

COR or designee.

Initial Pest Assessment C.52 Due twenty (20) calendar days before the start of the contract.

Integrated Pest Management Plan

C.52.5 Plan due by the start of contract. COR or designee.

Safety Data Sheets (SDS) with Inventory List of Products

C.56 No later than fifteen (15) calendar days prior to start of contract, maintain continuously onsite

COR or designee.

Inventory List of Products (non-hazardous)

C.56 No later than fifteen (15) calendar days prior to start of contract, maintained continuously

COR or designee.

The collection and submission of GSA Form 139, Recording Presence

H.10 Submit within three (3) calendar days of each week’s end.

COR or designee

Asbestos awareness training certification

H.15 Training within sixty (60) calendar days after start. Certify completion within 5 days of training.

COR or designee.

Qualification of Key Employees, Supervisors, regular employees (May 1989)

H.17 Due in Bid Package, and as requested. COR or designee

Submission of resumes for new employees

H.17.5 The Contractor must submit resumes for all personnel prior to personnel beginning work.

COR or designee

State licensing – if required

H.17.6 Within 90 calendar days of beginning employment.

COR or designee

Price proposal for additional services work

H.20.2 Within 48 hours of the request. CO or COR.

Green Products and Services Report

H.23 Submittal due to GSA on the contract anniversary (start) date annually.

COR or designee

Recycled Content Product Certification

H.23.6 Annually on the contract renewal date. COR or designee

Green Cleaning Training

H.23.7 Within five (5) days of the completion of training. Due sixty (60) days after the start of the contract.

COR or designee

8/30/2017 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 1/10

WD 15-4281 (Rev.-7) was first posted on www.wdol.gov on 08/01/2017

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-4281

Daniel W. Simms Division of | Revision No.: 7 Director Wage Determinations| Date Of Revision: 07/25/2017 Note: Under Executive Order (EO) 13658, an hourly minimum wage of $10.20 for calendar year 2017 applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2015. If this contract is covered by the EO, the contractor must pay all workers in any classification listed on this wage determination at least $10.20 per hour (or the applicable wage rate listed on this wage determination, if it is higher) for all hours spent performing on the contract in calendar year 2017. The EO minimum wage rate will be adjusted annually.

Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

States: District of Columbia, Maryland, Virginia

Area: District of Columbia Statewide Maryland Counties of Calvert, Charles, Prince George's Virginia Counties of Alexandria, Arlington, Fairfax, Falls Church, Fauquier, Loudoun, Manassas, Manassas Park, Prince William, Stafford

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 18.06 01012 - Accounting Clerk II 20.28 01013 - Accounting Clerk III 22.68 01020 - Administrative Assistant 31.98 01035 - Court Reporter 21.84 01041 - Customer Service Representative I 14.94 01042 - Customer Service Representative II 16.81 01043 - Customer Service Representative III 18.33 01051 - Data Entry Operator I 14.88 01052 - Data Entry Operator II 16.23 01060 - Dispatcher, Motor Vehicle 19.28 01070 - Document Preparation Clerk 16.17 01090 - Duplicating Machine Operator 16.17 01111 - General Clerk I 14.88 01112 - General Clerk II 16.24 01113 - General Clerk III 18.74 01120 - Housing Referral Assistant 25.29 01141 - Messenger Courier 16.18 01191 - Order Clerk I 15.12 01192 - Order Clerk II 16.50 01261 - Personnel Assistant (Employment) I 18.15 01262 - Personnel Assistant (Employment) II 20.32 01263 - Personnel Assistant (Employment) III 22.65 01270 - Production Control Clerk 25.24 01290 - Rental Clerk 16.55 01300 - Scheduler, Maintenance 18.07 01311 - Secretary I 18.07 01312 - Secretary II 20.18 01313 - Secretary III 25.29 01320 - Service Order Dispatcher 17.24

Exhibit J7- Wage Determination https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 2/10

01410 - Supply Technician 31.98 01420 - Survey Worker 20.03 01460 - Switchboard Operator/Receptionist 15.07 01531 - Travel Clerk I 14.80 01532 - Travel Clerk II 15.91 01533 - Travel Clerk III 17.08 01611 - Word Processor I 16.56 01612 - Word Processor II 18.59 01613 - Word Processor III 20.79 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 28.60 05010 - Automotive Electrician 23.51 05040 - Automotive Glass Installer 22.15 05070 - Automotive Worker 22.15 05110 - Mobile Equipment Servicer 19.04 05130 - Motor Equipment Metal Mechanic 24.78 05160 - Motor Equipment Metal Worker 22.15 05190 - Motor Vehicle Mechanic 24.78 05220 - Motor Vehicle Mechanic Helper 18.49 05250 - Motor Vehicle Upholstery Worker 21.63 05280 - Motor Vehicle Wrecker 22.15 05310 - Painter, Automotive 23.51 05340 - Radiator Repair Specialist 22.15 05370 - Tire Repairer 14.44 05400 - Transmission Repair Specialist 24.78 07000 - Food Preparation And Service Occupations 07010 - Baker 14.14 07041 - Cook I 15.15 07042 - Cook II 17.61 07070 - Dishwasher 10.72 07130 - Food Service Worker 11.01 07210 - Meat Cutter 20.10 07260 - Waiter/Waitress 10.67 09000 - Furniture Maintenance And Repair Occupations 09010 - Electrostatic Spray Painter 19.86 09040 - Furniture Handler 14.06 09080 - Furniture Refinisher 20.23 09090 - Furniture Refinisher Helper 15.52 09110 - Furniture Repairer, Minor 17.94 09130 - Upholsterer 19.86 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 10.54 11060 - Elevator Operator 12.66 11090 - Gardener 18.52 11122 - Housekeeping Aide 12.66 11150 - Janitor 12.66 11210 - Laborer, Grounds Maintenance 13.82 11240 - Maid or Houseman 12.22 11260 - Pruner 12.25 11270 - Tractor Operator 16.94 11330 - Trail Maintenance Worker 13.82 11360 - Window Cleaner 14.28 12000 - Health Occupations 12010 - Ambulance Driver 22.31 12011 - Breath Alcohol Technician 21.35 12012 - Certified Occupational Therapist Assistant 27.96 12015 - Certified Physical Therapist Assistant 25.93 12020 - Dental Assistant 19.78 12025 - Dental Hygienist 45.00 12030 - EKG Technician 33.48 12035 - Electroneurodiagnostic Technologist 33.48 12040 - Emergency Medical Technician 22.31 12071 - Licensed Practical Nurse I 19.07 12072 - Licensed Practical Nurse II 21.35 12073 - Licensed Practical Nurse III 24.13 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 3/10

12100 - Medical Assistant 17.17 12130 - Medical Laboratory Technician 18.98 12160 - Medical Record Clerk 18.80 12190 - Medical Record Technician 21.04 12195 - Medical Transcriptionist 20.50 12210 - Nuclear Medicine Technologist 39.16 12221 - Nursing Assistant I 11.74 12222 - Nursing Assistant II 13.19 12223 - Nursing Assistant III 14.40 12224 - Nursing Assistant IV 16.16 12235 - Optical Dispenser 20.67 12236 - Optical Technician 17.38 12250 - Pharmacy Technician 18.12 12280 - Phlebotomist 17.93 12305 - Radiologic Technologist 33.85 12311 - Registered Nurse I 27.64 12312 - Registered Nurse II 33.44 12313 - Registered Nurse II, Specialist 33.44 12314 - Registered Nurse III 40.13 12315 - Registered Nurse III, Anesthetist 40.13 12316 - Registered Nurse IV 48.10 12317 - Scheduler (Drug and Alcohol Testing) 25.90 12320 - Substance Abuse Treatment Counselor 27.04 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 21.37 13012 - Exhibits Specialist II 26.46 13013 - Exhibits Specialist III 32.37 13041 - Illustrator I 20.48 13042 - Illustrator II 25.38 13043 - Illustrator III 31.03 13047 - Librarian 37.95 13050 - Library Aide/Clerk 16.35 13054 - Library Information Technology Systems 34.26 Administrator 13058 - Library Technician 20.89 13061 - Media Specialist I 22.66 13062 - Media Specialist II 25.36 13063 - Media Specialist III 28.27 13071 - Photographer I 16.65 13072 - Photographer II 18.90 13073 - Photographer III 23.67 13074 - Photographer IV 28.65 13075 - Photographer V 33.76 13090 - Technical Order Library Clerk 20.54 13110 - Video Teleconference Technician 23.38 14000 - Information Technology Occupations 14041 - Computer Operator I 18.92 14042 - Computer Operator II 21.18 14043 - Computer Operator III 23.60 14044 - Computer Operator IV 26.22 14045 - Computer Operator V 29.05 14071 - Computer Programmer I (see 1) 26.36 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 18.92 14160 - Personal Computer Support Technician 26.22 14170 - System Support Specialist 37.87 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 36.47 15020 - Aircrew Training Devices Instructor (Rated) 44.06 15030 - Air Crew Training Devices Instructor (Pilot) 52.81 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 4/10

15050 - Computer Based Training Specialist / Instructor 36.47 15060 - Educational Technologist 36.80 15070 - Flight Instructor (Pilot) 52.81 15080 - Graphic Artist 30.47 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 48.72 15086 - Maintenance Test Pilot, Rotary Wing 48.72 15088 - Non-Maintenance Test/Co-Pilot 48.72 15090 - Technical Instructor 28.79 15095 - Technical Instructor/Course Developer 35.22 15110 - Test Proctor 23.24 15120 - Tutor 23.24 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 11.41 16030 - Counter Attendant 11.41 16040 - Dry Cleaner 14.66 16070 - Finisher, Flatwork, Machine 11.41 16090 - Presser, Hand 11.41 16110 - Presser, Machine, Drycleaning 11.41 16130 - Presser, Machine, Shirts 11.41 16160 - Presser, Machine, Wearing Apparel, Laundry 11.41 16190 - Sewing Machine Operator 15.71 16220 - Tailor 16.64 16250 - Washer, Machine 12.51 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 24.71 19040 - Tool And Die Maker 28.29 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 18.11 21030 - Material Coordinator 25.24 21040 - Material Expediter 25.24 21050 - Material Handling Laborer 13.83 21071 - Order Filler 15.09 21080 - Production Line Worker (Food Processing) 18.11 21110 - Shipping Packer 17.65 21130 - Shipping/Receiving Clerk 17.65 21140 - Store Worker I 12.49 21150 - Stock Clerk 17.98 21210 - Tools And Parts Attendant 18.11 21410 - Warehouse Specialist 18.11 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 32.92 23019 - Aircraft Logs and Records Technician 23.91 23021 - Aircraft Mechanic I 31.25 23022 - Aircraft Mechanic II 32.92 23023 - Aircraft Mechanic III 34.52 23040 - Aircraft Mechanic Helper 21.22 23050 - Aircraft, Painter 29.92 23060 - Aircraft Servicer 23.91 23070 - Aircraft Survival Flight Equipment Technician 29.92 23080 - Aircraft Worker 25.42 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 25.42 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 31.25

II

23110 - Appliance Mechanic 21.75 23120 - Bicycle Repairer 14.43 23125 - Cable Splicer 31.48 23130 - Carpenter, Maintenance 22.45 23140 - Carpet Layer 20.49 23160 - Electrician, Maintenance 27.98 23181 - Electronics Technician Maintenance I 30.17 23182 - Electronics Technician Maintenance II 32.03 23183 - Electronics Technician Maintenance III 33.75 23260 - Fabric Worker 22.55 23290 - Fire Alarm System Mechanic 22.91 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 5/10

23310 - Fire Extinguisher Repairer 20.77 23311 - Fuel Distribution System Mechanic 27.60 23312 - Fuel Distribution System Operator 23.45 23370 - General Maintenance Worker 21.43 23380 - Ground Support Equipment Mechanic 31.25 23381 - Ground Support Equipment Servicer 23.91 23382 - Ground Support Equipment Worker 25.42 23391 - Gunsmith I 20.77 23392 - Gunsmith II 24.15 23393 - Gunsmith III 27.00 23410 - Heating, Ventilation And Air-Conditioning 28.33 Mechanic 23411 - Heating, Ventilation And Air Contidioning 29.84 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 26.13 23440 - Heavy Equipment Operator 22.91 23460 - Instrument Mechanic 27.34 23465 - Laboratory/Shelter Mechanic 25.64 23470 - Laborer 14.98 23510 - Locksmith 23.54 23530 - Machinery Maintenance Mechanic 27.44 23550 - Machinist, Maintenance 26.10 23580 - Maintenance Trades Helper 18.27 23591 - Metrology Technician I 27.34 23592 - Metrology Technician II 28.79 23593 - Metrology Technician III 30.19 23640 - Millwright 28.19 23710 - Office Appliance Repairer 22.96 23760 - Painter, Maintenance 21.75 23790 - Pipefitter, Maintenance 26.55 23810 - Plumber, Maintenance 25.21 23820 - Pneudraulic Systems Mechanic 27.00 23850 - Rigger 27.72 23870 - Scale Mechanic 24.15 23890 - Sheet-Metal Worker, Maintenance 24.81 23910 - Small Engine Mechanic 20.49 23931 - Telecommunications Mechanic I 29.95 23932 - Telecommunications Mechanic II 31.55 23950 - Telephone Lineman 32.28 23960 - Welder, Combination, Maintenance 24.34 23965 - Well Driller 22.91 23970 - Woodcraft Worker 27.00 23980 - Woodworker 20.77 24000 - Personal Needs Occupations 24550 - Case Manager 19.40 24570 - Child Care Attendant 12.79 24580 - Child Care Center Clerk 17.77 24610 - Chore Aide 11.57 24620 - Family Readiness And Support Services 19.40 Coordinator 24630 - Homemaker 19.40 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 33.03 25040 - Sewage Plant Operator 24.67 25070 - Stationary Engineer 33.03 25190 - Ventilation Equipment Tender 23.58 25210 - Water Treatment Plant Operator 24.67 27000 - Protective Service Occupations 27004 - Alarm Monitor 23.09 27007 - Baggage Inspector 15.38 27008 - Corrections Officer 25.08 27010 - Court Security Officer 26.37 27030 - Detection Dog Handler 20.57 27040 - Detention Officer 25.08 27070 - Firefighter 28.10 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 6/10

27101 - Guard I 15.38 27102 - Guard II 20.57 27131 - Police Officer I 29.70 27132 - Police Officer II 33.00 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 13.59 28042 - Carnival Equipment Repairer 14.63 28043 - Carnival Worker 9.24 28210 - Gate Attendant/Gate Tender 15.74 28310 - Lifeguard 11.59 28350 - Park Attendant (Aide) 17.62 28510 - Recreation Aide/Health Facility Attendant 12.85 28515 - Recreation Specialist 21.82 28630 - Sports Official 14.03 28690 - Swimming Pool Operator 18.21 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 27.98 29020 - Hatch Tender 27.98 29030 - Line Handler 27.98 29041 - Stevedore I 25.78 29042 - Stevedore II 29.33 30000 - Technical Occupations 30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 41.44 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 28.58 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 31.47 30021 - Archeological Technician I 20.19 30022 - Archeological Technician II 22.60 30023 - Archeological Technician III 27.98 30030 - Cartographic Technician 27.98 30040 - Civil Engineering Technician 26.41 30051 - Cryogenic Technician I 24.89 30052 - Cryogenic Technician II 27.49 30061 - Drafter/CAD Operator I 20.19 30062 - Drafter/CAD Operator II 22.60 30063 - Drafter/CAD Operator III 25.19 30064 - Drafter/CAD Operator IV 31.00 30081 - Engineering Technician I 22.92 30082 - Engineering Technician II 25.72 30083 - Engineering Technician III 28.79 30084 - Engineering Technician IV 35.64 30085 - Engineering Technician V 43.61 30086 - Engineering Technician VI 52.76 30090 - Environmental Technician 27.41 30095 - Evidence Control Specialist 22.47 30210 - Laboratory Technician 24.41 30221 - Latent Fingerprint Technician I 33.09 30222 - Latent Fingerprint Technician II 36.55 30240 - Mathematical Technician 28.94 30361 - Paralegal/Legal Assistant I 21.36 30362 - Paralegal/Legal Assistant II 26.47 30363 - Paralegal/Legal Assistant III 32.36 30364 - Paralegal/Legal Assistant IV 39.16 30375 - Petroleum Supply Specialist 27.49 30390 - Photo-Optics Technician 27.98 30395 - Radiation Control Technician 27.49 30461 - Technical Writer I 25.75 30462 - Technical Writer II 31.51 30463 - Technical Writer III 38.12 30491 - Unexploded Ordnance (UXO) Technician I 26.34 30492 - Unexploded Ordnance (UXO) Technician II 31.87 30493 - Unexploded Ordnance (UXO) Technician III 38.20 30494 - Unexploded (UXO) Safety Escort 26.34 30495 - Unexploded (UXO) Sweep Personnel 26.34 30501 - Weather Forecaster I 26.93 30502 - Weather Forecaster II 32.75 https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 7/10

30620 - Weather Observer, Combined Upper Air Or (see 2) 25.19 Surface Programs 30621 - Weather Observer, Senior (see 2) 27.98 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 31.87 31020 - Bus Aide 14.32 31030 - Bus Driver 20.85 31043 - Driver Courier 15.38 31260 - Parking and Lot Attendant 11.06 31290 - Shuttle Bus Driver 16.83 31310 - Taxi Driver 13.98 31361 - Truckdriver, Light 16.83 31362 - Truckdriver, Medium 18.28 31363 - Truckdriver, Heavy 20.54 31364 - Truckdriver, Tractor-Trailer 20.54 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 15.54 99030 - Cashier 10.51 99050 - Desk Clerk 12.92 99095 - Embalmer 27.90 99130 - Flight Follower 26.34 99251 - Laboratory Animal Caretaker I 13.24 99252 - Laboratory Animal Caretaker II 14.47 99260 - Marketing Analyst 33.51 99310 - Mortician 34.10 99410 - Pest Controller 18.70 99510 - Photofinishing Worker 13.20 99710 - Recycling Laborer 19.20 99711 - Recycling Specialist 23.54 99730 - Refuse Collector 17.01 99810 - Sales Clerk 12.09 99820 - School Crossing Guard 16.25 99830 - Survey Party Chief 25.06 99831 - Surveying Aide 15.57 99832 - Surveying Technician 23.81 99840 - Vending Machine Attendant 15.48 99841 - Vending Machine Repairer 19.67 99842 - Vending Machine Repairer Helper 15.48

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.41 per hour or $176.40 per week or $764.40 per month

HEALTH & WELFARE EO 13706: $4.13 per hour, or $165.20 per week, or $715.87 per month

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service https://www.wdol.gov/wdol/scafiles/std/15-4281.txt?v=7 8/10 includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of ten paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: Under the SCA at section 8(b), this wage determination does not apply to any employee who individually qualifies as a bona fide executive, administrative, or professional employee as defined in 29 C.F.R. Part 541. Because most Computer System Analysts and Computer Programmers who are compensated at a rate not less than $27.63 (or on a salary or fee basis at a rate not less than $455 per week) an hour would likely qualify as exempt computer professionals, (29 C.F.R. 541.

400) wage rates may not be listed on this wage determination for all occupations within those job families. In addition, because this wage determination may not list a wage rate for some or all occupations within those job families if the survey data indicates that the prevailing wage rate for the occupation equals or exceeds $27.63 per hour conformances may be necessary for certain nonexempt employees. For example, if an individual employee is nonexempt but nevertheless performs duties within the scope of one of the Computer Systems Analyst or Computer Programmer occupations for which this wage determination does not specify an SCA wage rate, then the wage rate for that employee must be conformed in accordance with the conformance procedures described in the conformance note included on this wage determination.

Additionally, because job titles vary widely and change quickly in the computer industry, job titles are not determinative of the application of the computer professional exemption. Therefore, the exemption applies only to computer employees who satisfy the compensation requirements and whose primary duty consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or…