AE-101 Wall Types.pdf

In order to achieve a two hour rating, add required additional layers of Type "X" 5/8" Gypsum Board on one side of existing wall

AutoCAD SHX Text

FULLY SPRINKLERED RECORD DRAWINGS 06-28-19

AutoCAD SHX Text

AE-101

AutoCAD SHX Text

PARTITION TYPES

AutoCAD SHX Text 595-24-105

AutoCAD SHX Text

AutoCAD SHX Text

LEBANON VAMC

AutoCAD SHX Text

1700 S. LINCOLN AVE., LEBANON, PA 17042-7529

AutoCAD SHX Text

MD

AutoCAD SHX Text 07-07-2025

AutoCAD SHX Text Replace Door Frames Building 104

AutoCAD SHX Text Drawing Title

AutoCAD SHX Text

ARCHITECT/ENGINEERS:

AutoCAD SHX Text Project Title

AutoCAD SHX Text Date

AutoCAD SHX Text Location

AutoCAD SHX Text Checked

AutoCAD SHX Text Building Number

AutoCAD SHX Text Project Number

AutoCAD SHX Text Drawing Number

AutoCAD SHX Text Drawn

AutoCAD SHX Text one eighth inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three inches = one foot

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text one and one half inches = one foot

AutoCAD SHX Text one inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text 6"

AutoCAD SHX Text 6"

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three quarters inch = one foot

AutoCAD SHX Text one half inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text three eighths inch = one foot

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text one quarter inch = one foot

AutoCAD SHX Text

VA FORM 08-6231

AutoCAD SHX Text Office of Construction and Facilities Management

AutoCAD SHX Text Revisions:

AutoCAD SHX Text Date

AutoCAD SHX Text

CONSULTANTS:

AutoCAD SHX Text Approved Project Director

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text F

AutoCAD SHX Text E

AutoCAD SHX Text D

AutoCAD SHX Text C

AutoCAD SHX Text B

AutoCAD SHX Text A

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text

AutoCAD SHX Text A. PARTITION NOTES APPLY TO ALL INTERIOR PARTITIONS CONSTRUCTED FOR PARTITION NOTES APPLY TO ALL INTERIOR PARTITIONS CONSTRUCTED FOR THE PROJECT. B. PARTITION TYPE DRAWINGS INDICATE THE GENERAL RELATIONSHIP AMONG PARTITION TYPE DRAWINGS INDICATE THE GENERAL RELATIONSHIP AMONG MATERIALS AND CONSTRUCTION OF PARTITIONS WITHIN THE SCOPE OF WORK. C. CONTRACTOR SHALL MODIFY FIRE RATED PARTITION (BOLD LINE) IN CONTRACTOR SHALL MODIFY FIRE RATED PARTITION (BOLD LINE) IN ACCORDANCE WITH THE REFERENCED U400 SERIES. (REFER TO U.L. FIRE RESISTANCE DIRECTORY- LATEST EDITION) 2-HR. UL RATED PARTITIONS INCLUDE THE FOLLOWING: a. PROVIDE AND INSTALL 5/8 THICK, 4’-0” WIDE GYPSUM WALL BOARD PROVIDE AND INSTALL 5/8 THICK, 4’-0” WIDE GYPSUM WALL BOARD -0” WIDE GYPSUM WALL BOARD WIDE GYPSUM WALL BOARD ATTACHED TO STEEL STUDS AND FLOOR AND CEILING TRACK WITH 1” LONG, TYPE S STEEL SCREWS SPACED 8” O.C. ALONG EDGES OF O.C. ALONG EDGES OF BOARD AND 12” O.C. IN THE FIELD OF THE BOARD. JOINTS SHALL O.C. IN THE FIELD OF THE BOARD. JOINTS SHALL BE ORIENTED VERTICALLY AND STAGGERED ON OPPOSITE SIDES OF THE ASSEMBLY. b. JOINT TAPE AND COMPOUND SHALL BE VINYL, DRY OR PRE-MIXED JOINT TAPE AND COMPOUND SHALL BE VINYL, DRY OR PRE-MIXED COMPOUND APPLIED IN TWO COATES TO JOINTS AND SCREW HEADS. PAPER TAPE, 2” WIDE EMBEDDED IN FIRST LAYER OF COMPOUND WIDE EMBEDDED IN FIRST LAYER OF COMPOUND OVER ALL JOINTS. c. PROVIDE AND INSTALL FIRE/SMOKE STOP/SEAL JOINT TREATMENT PROVIDE AND INSTALL FIRE/SMOKE STOP/SEAL JOINT TREATMENT SYSTEM AT INTERSECTION OF PARTITION WITH STRUCTURE ABOVE. D. MODIFIED CORRIDOR WALL WITHIN THIS SCOPE OF WORK ARE TO BE MODIFIED CORRIDOR WALL WITHIN THIS SCOPE OF WORK ARE TO BE CONSTRUCTED AS 2-HOUR RATED WALL THAT ARE ALSO RESISTANT TO THE PASSAGE OF SMOKE. E. EXISTING FACILITY STRUCTURE IS CONCRETE FRAMED WITH CONCRETE EXISTING FACILITY STRUCTURE IS CONCRETE FRAMED WITH CONCRETE PAN-JOISTS SPANNING BETWEEN (AND PERPENDICULAR TO) THE BEAMS. EXISTING CONCRETE BEAM AND PAN JOIST DEPTHS VARY. F. WHERE GYPSUM BOARD IS SHOWN TO EXTEND TO STRUCTURE ABOVE, WHERE GYPSUM BOARD IS SHOWN TO EXTEND TO STRUCTURE ABOVE, HOLD THE GYPSUM BOARD 1” BELOW THE LINE OF EXISTING STRUCTURE. BELOW THE LINE OF EXISTING STRUCTURE. (FIRE SEAL ALL SUCH VOIDS IN CONTINUOUS GYPSUM BOARD WHERE OCCURRING AT FIRE-RATED WALLS.) G. WHERE FIRE RATED PARTITIONS ABUT OR INTERSECT WITH NON-RATED WHERE FIRE RATED PARTITIONS ABUT OR INTERSECT WITH NON-RATED PARTITIONS: CONSTRUCT FIRE-RATED PARTITIONS COMPLETE – WITH GYPSUM WITH GYPSUM BOARD CONTINUOUS AND UNINTERRUPTED BY THE FRAMING OR FINISH MATERIAL OF THE NON-RATED PARTITION. H. LABEL ALL FIRE OR SMOKE PARTITIONS/WALLS ABOVE CEILING IN RED. LABEL ALL FIRE OR SMOKE PARTITIONS/WALLS ABOVE CEILING IN RED. LETTER HEIGHT SHALL BE A MINIMUM OF 3 INCHES. SPACE 10'-0" O.C.

AutoCAD SHX Text

PARTITION NOTES

AutoCAD SHX Text NOTE: WHERE RATED PARTITION INTERSECT IN BETWEEN TWO RATED PARTITIONS, THE HIGHER RATED PARTITION WILL BE UNINTERRUPTED IN ITS CONSTRUCTION

AutoCAD SHX Text

UNDERSIDE OF STRUCTURE

AutoCAD SHX Text

CONTINUOUS SEALANT (TYPICAL)

AutoCAD SHX Text

CEILING LINE

AutoCAD SHX Text ADD ONE ADDITIONAL LAYER OF TYPE 'X' 5/8" GYPSUM BOARD ONE SIDE ON 2 1/2" 'C-H' METAL STUDS @ 24" O.C. W/ CONTINUOUS 'J' SHAPED TOP AND BOTTOM RUNNERS

AutoCAD SHX Text

CONTINUOUS SEALANT (TYPICAL)

AutoCAD SHX Text ONE LAYER OF TYPE 'X' 5/8" GYPSUM BOARD OPPOSITE SIDE IS EXISTING AND SHALL REMAIN

AutoCAD SHX Text

PLAN VIEW