26-0306 LSD Gardner - BID PACK 2 - Addendum 2.pdf

LSD Gardner Food Service – Bid Pack 2, Addendum No. 2 – Narrative of Changes Page 1 | 2

LSD Gardner Food Service Bid Pack 2, Addendum No. 2 Narrative of Changes

Project Name: Gardner Elementary Food Service – Equipment Replacement & Renovations SO-1852

Date: April 6, 2026

Project Location:

333 Dahlia Dr, Lansing, MI 48911

Architect’s Project #: 26000752A

Owner/Client: Lansing School District Attention: David Beckering

Issued to: Beckering Construction Email: djb@beckering.com City/State: Grand Rapids, MI Zip: 49548

Delivered via:

This Addendum revises the Contract Documents and shall have the same force and effect;

make the following changes to the Specifications and Drawings for this project. The following is a written summary of the changes made by this Addendum. Strict attention should be given to the Drawings and Specifications for area take-off, quantities and items deleted or revised herein. This addendum forms a part of the Contract Documents.

Issued by CED by: Courtney Norris Date Signed: 04/06/2026 Prepared by: Courtney Norris Date Signed: 04/06/2026 Distribution:

Below is a list of the changes made to our documents in response to the comments, RFIs, or clarifications provided prior to Bid. Please feel free to reach out with any further questions or clarifications in a timely manner.

Sincerely, Courtney Norris

☐ Messenger

☐ Express

☐ Mail

☐ Hand-carried

☐ Pick-up

☐ UPS

Address Sent to:

☐ Newforma

☒ Email

☐ FTP

LSD Gardner Food Service – Bid Pack 2, Addendum No. 2 – Narrative of Changes Page 2 | 2

Drawings

• A601 – DOOR SCHEUDLE AND SPECIFICATIONS (Reissued) o Added hardware set numbers to the door schedule o Added door hardware specifications and sets

ATTACHMENTS

Reissued Drawings:

A601

END OF ADDENDUM NO. 2

NG

SCHEDULE

SEE

S E

E S

C H

E D

U L E

6" 9"

F

SCHEDULE

SEE

S E

E S

C H

E D

U L E

Colliers Engineering & Design, Architecture, Landscape Architecture, Surveying, CT P.C.

Colliers

Engineering & Design

Colliers

Engineering & Design

GRAND RAPIDS

560 5th St. NW

Suite 305

Grand Rapids, MI 49504

Phone: 616.827.4270

A R

C H

D x

PROJECT MANAGER:

DESIGNER: REVIEWER:

DISCIPLINE LEAD:

DRAWING NUMBER:

DATE ISSUED: PROJECT NUMBER:

SHEET NAME:

Copyright © 2024. Colliers Engineering & Design All Rights Reserved. This drawing and all the information contained herein is authorized for use only by the party for whom the services were contracted or to whom it is certified. This drawing may not be copied, reused, disclosed, distributed or relied upon for any other purpose without the express written consent of

Colliers Engineering & Design.

www.colliersengineering.com

NOTE: DO NOT SCALE DRAWING FOR CONSTRUCTION.

MI ARCHITECTURE

FIRM LICENSE # NLP000605

E F

D

CB

A

KEY PLAN

BID PACK 2

/6

/2

:1

:1

P

M

GARDNER ELEMENTARY

FOOD SERVICE - EQUIPMENT

REPLACEMENT &

RENOVATION SO-1852

333 DAHLIA DRIVE

LANSING, MI 48911

C NORRIS

E POST

B HUYLER

A601

DOOR SCHEDULE AND

SPECIFICATIONS

LANSING SCHOOL

DISTRICT

4/6/26 26000752A

DOOR SCHEDULE

DOOR #

DOOR FRAME GENERAL

DOOR #

WIDTH

LEAF 1

WIDTH

LEAF 2 HEIGHT T

H

K

T Y

P E

M A

T -F

IN

T Y

P E

M A

T -F

IN

H D

W R

R A

T

IN

G

REMARKS

FIRST FLOOR

129A

3' - 0" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

129A

3' - 0" 3' - 0" 7' - 0" 0' - 1 3/4" F WD - ST EXIST EXIST -

NEW PAINT

MIN

(2) NEW DOORS + HDWR,

EXIST FRAME (PH. 2)

132A

3' - 0" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

132A

133A

3' - 0" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

133A

133B

3' - 0" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

133B

133C

3' - 1" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

133C

133D

3' - 0" 7' - 0" 0' - 1 3/4" NG WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 2)

133D

136A

3' - 8" 7' - 0" 0' - 1 3/4" F WD - ST EXIST EXIST -

NEW PAINT

MIN

NEW DOOR + HDWR, EXIST

FRAME (PH. 1) VERIFY SIZE OF

OPENING AND ANY RATING

REQUIREMENTS IN FIELD

136A

D-118

3' - 0" 3' - 0" 7' - 0" 0' - 1 3/4" F WD - ST EXIST EXIST -

NEW PAINT

MIN

(2) NEW DOORS + HDWR,

EXIST FRAME (PH. 2)

D-118

D-126

3' - 0" 3' - 0" 7' - 0" 0' - 1 3/4" F WD - ST EXIST EXIST -

NEW PAINT

MIN

(2) NEW DOORS + HDWR,

EXIST FRAME (PH. 2)

D-126

D-135A

3' - 0" 7' - 0" 0' - 1 3/4" F WD - ST EXIST EXIST -

NEW PAINT

NEW DOOR + HDWR, EXIST

FRAME (PH. 1)

D-135A

DOOR - TYPES

REV DATE DESCRIPTION

3 03/13/26 BID PACK 2 - BIDS & PERMITS

4 03/04/26 BID PACK 2 - ADDENDUM 1

5 04/06/26 BID PACK 2 - ADDENDUM 2

081416 - FLUSH WOOD DOORS

A. ACCEPTABLE MANUFACTURERS: EGGERS INDUSTRIES, OSHKOSH DOOR COMPANY, VT

INDUSTRIES, AND FORTE OPENING SOLUTIONS (MASONITE ARCHITECTURAL).

B. INTERIOR DOORS: SOLID-CORE FIVE-PLY FLUSH WOOD VENEER-FACED DOORS FOR

TRANSPARENT FINISH.

a. PERFORMANCE GRADE: ANSI/WDMA I.S. 1A EXTRA HEAVY DUTY.

b. FACES: PLAIN SLICED RED OAK, CENTER-BALANCE MATCH.

c. EXPOSED VERTICAL AND TOP EDGES: SAME SPECIES AS FACES, ARCHITECTURAL

WOODWORK STANDARDS EDGE TYPE A.

d. FIRE RATED DOORS: PROVIDE EDGE CONSTRUCTION WITH INTUMESCENT SEALS

CONCEALED BY OUTER STILE.

e. CORE FOR FIRE-RATED DOORS: AS REQUIRED TO ACHIEVE FIRE-PROTECTION RATING

INDICATED ON SCHEDULE.

C. FINISH: FACTORY FINISH, TRANSPARENT, SATIN, STAIN COLOR TO BE SELECTED BY

ARCHITECT FROM MANUFACTURER'S STANDARD

COLORS.

087100 - DOOR HARDWARE:

A. MANUFACTURERS/PRODUCTS

a. HINGES: IVES 5BB SERIES. ALSO ACCEPTABLE: HAGER BB1191/1279 SERIES OR MCKINNEY TB

SERIES.

b. CONTINUOUS HINGES: IVES. ALSO ACCEPTABLE: SELECT OR PEMKO.

c. FLUSH BOLTS: IVES. ALSO ACCEPTABLE: TRIMCO OR ROCKWOOD.

d. COORDINATORS: IVES. ALSO ACCEPTABLE: TRIMCO OR ROCKWOOD.

e. MORTISE LOCKS: SCHLAGE L9000 SERIES. ALSO ACCEPTABLE: SARGENT 8200 SERIES.

• WARRANTY: 10 YEARS.

f. EXIST DEVICES: VON DUPRIN 98/35A SERIES. ALSO ACCEPTABLE: SARGENT 19-43-GL-80

SERIES.

g. CYLINDERS: BEST. NO SUBSTITUTION. PROVIDE INTERCHANGEABLE CYLINDERS/CORES TO

MATCH OWNER'S EXISTING KEY SYSTEM, COMPLIANT WITH ANSI/BHMA A156.5; LATEST

REVISION.

h. DOOR CLOSERS: LCN 4040XP SERIES. ALSO ACCEPTABLE: SARGENT 281 SERIES.

• WARRANTY: 30 YEARS.

i. PROTECTION PLATES: IVES. ALSO ACCEPTABLE: TRIMCO OR ROCKWOOD.

j. OVERHEAD STOPS AND OVERHEAD STOP/HOLDERS: GLYNN-JOHNSON. ALSO ACCEPTABLE:

SARGENT OR ABH.

k. DOOR STOPS AND HOLDERS: IVES. ALSO ACCEPTABLE: TRIMCO OR ROCKWOOD.

l. THRESHOLDS, SEALS, DOOR SWEEPS, AUTOMATIC DOOR BOTTOMS, AND GASKETING: ZERO

INTERNATIONAL. ALSO ACCEPTABLE: NATIONAL GUARD, REESE, OR PEMKO.

m. FINISHES: GENERALLY, SATIN CHROMIUM, BHMA 626/652 (US26D). PROVIDE FINISH FOR EACH

ITEM AS INDICATED IN THE SETS.

B. KEYING

a. SCHEDULED SYSTEM:

• EXISTING FACTORY REGISTERED SYSTEM:

1. PROVIDE CYLINDERS/CORES 0-BITTED FOR OWNER'S EXISTING FACTORY

REGISTERED KEYING SYSTEM. COMPLY WITH GUIDELINES IN ANSI/BHMA A156.28.

b. REQUIREMENTS:

• PERMANENT KEYING: PROVIDED BY OWNER.

C. HARDWARE SET #01 (DOORS 129A, 132A)

a. (3) EA HINGE - 5BB1HW/SW (SIZE AS REQ'D) - FINISH 652 - MFR IVE

- CONFIRM HINGE REQ. TO MATCH EXISTING FRAME PREPS

b. (1) EA CLASSROOM LOCK - L9070BDC 03A - FINISH 626 - MFR SCH

c. (1) EA PERMANENT CORE - CONTRACTOR SUPPLIED: TO BE COMBINATED BY OWNER - MFR

BES

d. (1) EA OH STOP & HOLDER - 90H - FINISH 630 - MFR GLY

e. (1) EA SURFACE CLOSER - 4040XP RW/PA TBSRT - FINISH 689 - MFR LCN

- PULL-SIDE

f. (1) EA KICK PLATE - 8400 10" X 2" LDW B-CS - FINISH 630 - MFR IVE

g. NOTES: FIELD VERIFY EXISTING CONDITIONS. VERIFY/COORDINATE PREPS ON EXISTING

FRAMES TO ENSURE THE COMPATIBILITY OF NEW HARDWARE PRIOR TO ORDER OF NEW

MATERIALS. PROVIDE FIELD MODIFICATIONS AND/OR NECESSARY FILLERS (PAINT TO MATCH

WHERE EXISTING IS PREVIOUSLY PAINTED), REINFORCEMENTS AND FASTENERS,

COMPATIBLE WITH EXISTING MATERIALS REQUIRED FOR MOUNTING NEW SPECIFIED

HARDWARE AND TO COVER EXISTING FRAME PREPARATIONS.

D. HARDWARE SET #02 (DOOR D-135A)

a. (3) EA HINGE - 5BB1HW/SW (SIZE AS REQ'D) NRP - FINISH 628 - MFR IVE

b. (1) EA CLASSROOM LOCK - L9070BDC 03A - FINISH 626 - MFR SCH

c. (1) EA PERMANENT CORE - CONTRACTOR SUPPLIED: TO BE COMBINATED BY OWNER - MFR

BES

d. (1) EA SURFACE CLOSER - 4040XP CUSH TBSRT - FINISH 689 - MFR LCN

e. (1) EA KICK PLATE - 8400 10" X 2" LDW B-CS - FINISH 630 - MFR IVE

f. NOTES: FIELD VERIFY EXISTING CONDITIONS. VERIFY/COORDINATE PREPS ON EXISTING

FRAMES TO ENSURE THE COMPATIBILITY OF NEW HARDWARE PRIOR TO ORDER OF NEW

MATERIALS. PROVIDE FIELD MODIFICATIONS AND/OR NECESSARY FILLERS (PAINT TO MATCH

WHERE EXISTING IS PREVIOUSLY PAINTED), REINFORCEMENTS AND FASTENERS,

COMPATIBLE WITH EXISTING MATERIALS REQUIRED FOR MOUNTING NEW SPECIFIED

HARDWARE AND TO COVER EXISTING FRAME PREPARATIONS.

E. HARDWARE SET #03 (DOORS 131, D-118, D-126)

a. (6) EA HINGE - 5BB1HW/SW (SIZE AS REQ'D) NRP - FINISH 652 - MFR IVE

- CONFIRM HINGE REQ. TO MATCH EXISTING FRAME PREPS

b. (1) EA CONST LATCHING BOLT - FB51P - FINISH 630 - MFR IVE

c. (1) EA DUST PROOF STRIKE - DP2 - FINISH 626 - MFR IVE

d. (1) EA CLASSROOM LOCK - L9070BDC 03A - FINISH 626 - MFR SCH

e. (1) EA PERMANENT CORE - CONTRACTOR SUPPLIED: TO BE COMBINATED BY OWNER - MFR

BES

f. (1) EA COORDINATOR - COR X FL - FINISH 628 - MFR IVE

g. (2) EA MOUNTING BRACKET - MB (AS REQ'D) - FINISH 689 - MFR IVE

h. (2) EA SURFACE CLOSER - 4040XP SCUSH TBSRT - FINISH 689 - MFR LCN

i. (1) EA GASKETING - 488S - FINISH BK - MFR ZER

j. (1) EA MEETING STILE - 8217S - FINISH BK - MFR ZER

k. NOTES: FIELD VERIFY EXISTING CONDITIONS. VERIFY/COORDINATE PREPS ON EXISTING

FRAMES TO ENSURE THE COMPATIBILITY OF NEW HARDWARE PRIOR TO ORDER OF NEW

MATERIALS. PROVIDE FIELD MODIFICATIONS AND/OR NECESSARY FILLERS (PAINT TO MATCH

WHERE EXISTING IS PREVIOUSLY PAINTED), REINFORCEMENTS AND FASTENERS,

COMPATIBLE WITH EXISTING MATERIALS REQUIRED FOR MOUNTING NEW SPECIFIED

HARDWARE AND TO COVER EXISTING FRAME PREPARATIONS PER NFPA 80.

SPECIFICATIONS

F. HARDWARE SET #04 (DOOR 136A)

a. (3) EA HINGE - 5BB1HW/SW (SIZE AS REQ'D) - FINISH 628 - MFR IVE

- CONFIRM HINGE REQ. TO MATCH EXISTING FRAME PREPS

b. (1) EA STOREROOM LOCK - LV9080BDC 03A - FINISH 626 - MFR SCH

c. (1) EA PERMANENT CORE - CONTRACTOR SUPPLIED: TO BE COMBINATED BY OWNER - MFR

BES

d. (1) EA SURFACE CLOSER - 4040XP RW/PA TBSRT - FINISH 689 - MFR LCN

- PULL-SIDE

e. (1) EA KICK PLATE - 8400 10" X 2" LDW B-CS - FINISH 630 - MFR IVE

f. (1) EA WALL STOP - WS406/407CVX - FINISH 630 - MFR IVE

g. (1) EA GASKETING - 488S - FINISH BK - MFR ZER

h. NOTES: FIELD VERIFY EXISTING CONDITIONS. VERIFY/COORDINATE PREPS ON EXISTING

FRAMES TO ENSURE THE COMPATIBILITY OF NEW HARDWARE PRIOR TO ORDER OF NEW

MATERIALS. PROVIDE FIELD MODIFICATIONS AND/OR NECESSARY FILLERS (PAINT TO MATCH

WHERE EXISTING IS PREVIOUSLY PAINTED), REINFORCEMENTS AND FASTENERS,

COMPATIBLE WITH EXISTING MATERIALS REQUIRED FOR MOUNTING NEW SPECIFIED

HARDWARE AND TO COVER EXISTING FRAME PREPARATIONS PER NFPA 80.

G. HARDWARE SET #05 (DOORS 133A, 133B, 133C, 133D)

a. (1) CONT. HINGE - 224XY - FINISH 628 - MFR IVE

b. (3) HINGE FILLER PLATE - SIZE AS REQ'D

c. (1) EA PANIC HARDWARE - CDSI-98-NL - FINISH 626 - MFR VON

d. (1) EA RIM CYLINDER - 1E72 (LESS CORE) - FINISH 626 - MFR BES

e. (1) EA MORTISE CYLINDER - 1E74 (LESS CORE) - FINISH 626 - MFR BES

f. (1) PERMANENT CORE - CONTRACTOR SUPPLIED: TO BE COMBINATED BY OWNER - MFR BES

g. (1) EA SURFACE CLOSER - 4040XP SCUSH TBSRT - FINISH 689 - MFR LCN

h. (1) KICK PLATE - 8400 10" X 2" LDW B-CS - FINISH 630 - MFR IVE

i. NOTES: FIELD VERIFY EXISTING CONDITIONS. VERIFY/COORDINATE PREPS ON EXISTING

FRAMES TO ENSURE THE COMPATIBILITY OF NEW HARDWARE PRIOR TO ORDER OF NEW

MATERIALS. PROVIDE FIELD MODIFICATIONS AND/OR NECESSARY FILLERS (PAINT TO MATCH

WHERE EXISTING IS PREVIOUSLY PAINTED), REINFORCEMENTS AND FASTENERS,

COMPATIBLE WITH EXISTING MATERIALS REQUIRED FOR MOUNTING NEW SPECIFIED

HARDWARE AND TO COVER EXISTING FRAME PREPARATIONS.

H. ALL HARDWARE TO MEET ACCESSIBILITY REQUIREMENTS SET BY 2017 ICC 117.1 AND ADA.

088000 - GLAZING:

A. MONOLITHIC GLASS:

a. HEAT STRENGTHENED FULLY TEMPERED FLOAT GLASS.

b. MINIMUM 6 MM THICK.

c. LOCATION: INTERIOR, NON-FIRE RATED LOCATIONS UNLESS OTHERWISE NOTED.

099123 - INTERIOR PAINTING:

A. BASIS OF DESIGN MANUFACTURER: SHERWIN WILLIAMS. ALSO ACCEPTABLE: BENJAMIN MOORE

AND PPG PAINTS.

B. PREPARATION OF SURFACES TO RECEIVE PAINT: CLEAN, DRY, DULL, AND SOUND.

C. PAINT SYSTEMS:

a. CMU (EXISTING PREVIOUSLY PAINTED):

• PRIMER: EXTREME BOND PRIMER, B51 SERIES

1. 3.1 MILS WET, .9 MILS DRY.

• ADHESION TEST: USE PRINCIPLES OF ASTM D3359 AFTER MINIMUM 7 DAY CURE TIME OF

PRIMER TO ENSURE 90% OF COATING CONTINUES TO ADHERE, CONTACT COATINGS

MANUFACTURER FOR ASSISTANCE AS NEEDED.

• INTERMEDIATE COAT: MATCH TOPCOAT.

• TOPCOAT: PRO INDUSTRIAL PRE-CAT EPOXY, K45-2150 SERIES.

1. 4.0 MILS WET, 1.6 MILS DRY PER COAT.

b. CMU (NEW/BARE):

• PRIMER: PRO INDUSTRIAL HEAVY DUTY BLOCK FILLER, B42 SERIES

• INTERMEDIATE COAT: MATCH TOP COAT

• TOPCOAT: PRO INDUSTRIAL PRE-CAT EPOXY, K45-2150 SERIES.

1. 4.0 MILS WET, 1.6 MILS DRY PER COAT.

c. HOLLOW METAL FRAMES AND DOORS:

• PRIMER: PRO INDUSTRIAL PRO CRYL UNIVERSAL PRIMER, B66-310 SERIES.

1. 5.0 TO 10 MILS WET, 2.0 TO 4.0 MILS DRY.

• INTERMEDIATE COAT: MATCH TOPCOAT.

• TOPCOAT: PRO INDUSTRIAL ACRYLIC SEMI-GLOSS COAT, B66-650 SERIES.

1. 2.5 TO 4.0 MILS DRY PER COAT.

d. GYPSUM BOARD AND PLASTER:

• PRIMER: PROMAR 200 ZERO VOC INTERIOR LATEX PRIMER, B28W2600

1. 4.0 MILS WET, 1.0 MILS DRY.

• INTERMEDIATE COAT: MATCH TOPCOAT.

• TOPCOAT: PROMAR 200 ZERO VOC INTERIOR LATEX EG-SHEL, B20-2600 SERIES.

1. 4.0 MILS WET, 1.6 MILS DRY.

D. COLORS: REFER TO BASIS OF DESIGN.