DWG 2200451-A.pdf

CAGE CODE 0WY55 DWG NO. 2200451 SHEET 1 OF 3

SIZE CAGE CODE DWG NO. REV

A 0WY55 2200451 A

SCALE: NONE SHEET 1 OF 3

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

WSR-88D RADAR OPERATIONS CENTER

1313 HALLEY CIRCLE

NORMAN, OKLAHOMA 73069-8480

MILLIMETERS

1 PL

2 PL

ANGLES 2

INCHES

2 PL .02

3 PL .010

NOMENCLATURE

CABLE ASSEMBLY, RG58, BNC MALE TO SMA MALE

APPROVALS

DWN AWB 121009 RMT RJG 121009

CHK BOB 121009 DOC DTH 121009

ENGR PDK 121009 CM

QA ROC

VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

2340094 WSR-88D

A 121009

ECP 0529

ECO A05431

INITIAL RELEASE

P.

KRENEK

CAGE CODE 0WY55 DWG NO. 2200451 SHEET 2 OF 3

SCALE: NONE SHEET 2 OF 3

GENERAL NOTES:

1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.1. IDENTIFICATION OF ANY SUGGESTED SOURCE OF SUPPLY (MANUFACTURER) CONTAINED IN THIS

SPECIFICATION IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR FUTURE AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).

1.2. THE USE OF A DIFFERENT PART FROM A LISTED SUGGESTED SOURCE OF SUPPLY OR A PART FROM A

NON-LISTED SUGGESTED SOURCE OF SUPPLY WHICH MEETS THE SPECIFICATIONS HEREIN SHALL OCCUR ONLY AFTER REVIEW/CONCURRENCE AND A FIRST ARTICLE QUALIFICATION BY THE WSR- 88D RADAR OPERATIONS CENTER (ROC) AS WELL AS ACCEPTANCE INSPECTION BY THE NATIONAL

RECONDITIONING CENTER (NRC).

2. REQUIREMENTS:

2.1. CABLE: RG58 PER MIL-C-17.

2.1.1. MOLDED JACKET: PVC, COLOR OPTIONAL.

2.1.2. CABLE SHIELD: TINNED COPPER CENTER CONDUCTOR AND BRAID.

2.1.3. MAXIMUM CABLE DIAMETER: .20

2.1.4. CABLE LENGTH: PER TABLE II.

2.2. CONNECTORS: ONE (1) BNC MALE AND ONE (1) SMA MALE.

2.3. OUTLINE: PER FIGURE 1.

2.4. ENVIRONMENTAL:

2.4.1. OPERATING TEMPERATURE: +10º C (+50° F) TO +35º C (+95°F)

2.4.2. NON-OPERATING TEMPERATURE: -35º C (-31°F) TO +60º C (+140° F)

2.5. RELIABILITY:

2.5.1. MTBF: N/A

2.6. PART IDENTIFICATION:

2.6.1. VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY VENDOR. PART NUMBER

MAY BE APPLIED TO PACKAGING.

3. PROCURING AGENCY:

3.1.1. THE PROCUREMENT AGENCY RESERVES THE RIGHT TO PERFORM ANY INSPECTION DEEMED

NECESSARY TO BE ASSURED THE PARTS CONFORM TO THE SPECIFIED REQUIREMENTS.

4. THE PART NUMBER IS THE DRAWING NUMBER SUFFIXED WITH THE APPLICABLE DASH NUMBER

SHOWN IN TABLE II.

CAGE CODE 0WY55 DWG NO. 2200451 SHEET 3 OF 3

SCALE: NONE SHEET 3 OF 3

5. SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

AMPHENOL CABLES ON DEMAND CORP. (CAGE CODE 13509)

ENDICOTT, NY

PART NO.: PER TABLE II

TABLE II

DASH

NO.

AMPHENOL

PART NO.

DIM “L”

201 CO-058SMABNC0-005 5 FT NOMINAL

6. FIGURES AND DIAGRAMS

FIGURE 1