DWG 2200257-A.pdf

CAGE CODE 0WY55 DWG NO. 2200257 SHEET 1 OF 3

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

2320208 2320211

WSR-88D A 070216 ECP 0232

ECO A03047 INITIAL RELEASE CWF

VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

WSR-88D RADAR OPERATIONS CENTER

3200 MARSHALL AVENUE

NORMAN, OKLAHOMA 73072-8032

NOMENCLATURE

MILLIMETERS

1 PL ±

2 PL ±

ANGLES ± 2°

INCHES

2 PL ±

3 PL ±

APPROVALS

DWN JCK 070119 RMT JWG 070216

CHK AWB 070126 DOC ARC 070212

ENGR CWF 070216 CM

QA ROC CMJ 070125

CABLE, MULTIPLE CONDUCTOR, TWISTED PAIR

SIZE CAGE CODE DWG NO. REV

A 0WY55 2200257 A

SCALE: NONE SHEET 1 OF 3

CAGE CODE 0WY55 DWG NO. 2200257 SHEET 2 OF 3

GENERAL NOTES:

1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.1. IDENTIFICATION OF ANY SUGGESTED SOURCE OF SUPPLY (MANUFACTURER) CONTAINED IN THIS

SPECIFICATION IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR FUTURE AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).

1.2. THE USE OF A DIFFERENT PART FROM A LISTED SUGGESTED SOURCE OF SUPPLY OR A PART FROM A

NON-LISTED SUGGESTED SOURCE OF SUPPLY WHICH MEETS THE SPECIFICATIONS HEREIN SHALL OCCUR ONLY AFTER REVIEW/CONCURRENCE AND A FIRST ARTICLE QUALIFICATION BY THE WSR- 88D RADAR OPERATIONS CENTER (ROC) AS WELL AS ACCEPTANCE INSPECTION BY THE NATIONAL

RECONDITIONING CENTER (NRC).

2. REQUIREMENTS:

2.1. CABLE: UL STYLE 2919 MULTI-CONDUCTOR DATA CABLE, AWG24 STRANDED CONDUCTORS, 25

TWISTED PAIRS, SHIELDED ON OUTER LAYER.

2.1.1. MOLDED JACKET: PVC, COLOR OPTIONAL.

2.1.2. CABLE SHIELDING: TWO SHIELDS ON OUTER LAYER

2.1.2.1. ALUMINUM FOIL-POLYESTER TAPE WITH SHORTING FOLD SURROUNDING THE 25-PAIR BUNDLE

2.1.2.2. BRAIDED TINNED COPPER SHIELD SURROUNDING ALUMINUM FOIL-POLYESTER TAPE.

2.1.3. MAXIMUM CABLE DIAMETER: .632

2.1.4. CABLE LENGTH: PER TABLE II.

2.2. OUTER JACKET: PVC – POLYVINYL CHLORIDE.

2.3. CONDUCTORS: 50 AWG24 STRANDED.

2.4. TWISTED PAIRS: 25.

2.5. COLOR CODE: A COLOR CODE TO DISCERN TWISTED PAIRS AND INDIVIDUAL CONDUCTORS IS REQUIRED. A SAMPLE COLOR CODE IS PROVIDED IN TABLE I. THIS COLOR CODE IS PREFERRED BUT

NOT REQUIRED.

SCALE: NONE SHEET 2 OF 3

CAGE CODE 0WY55 DWG NO. 2200257 SHEET 3 OF 3

TABLE I

PAIR COLORS PAIR COLORS

1 WHITE/BLUE & BLUE/WHITE 14 BLACK/BROWN & BROWN/BLACK

2 WHITE/ORANGE & ORANGE/WHITE 15 BLACK/GRAY & GRAY/BLACK

3 WHITE/GREEN & GREEN/WHITE 16 YELLOW/BLUE & BLUE/YELLOW

4 WHITE/BROWN & BROWN/WHITE 17 YELLOW/ORANGE & ORANGE/YELLOW

5 WHITE/GRAY & GRAY/WHITE 18 YELLOW/GREEN & GREEN/YELLOW

6 RED/BLUE & BLUE/RED 19 YELLOW/BROWN & BROWN/YELLOW

7 RED/ORANGE & ORANGE/RED 20 YELLOW/GRAY & GRAY/YELLOW

8 RED/GREEN & GREEN/RED 21 PURPLE/BLUE & BLUE/PURPLE

9 RED/BROWN & BROWN/RED 22 PURPLE/ORANGE & ORANGE/PURPLE

10 RED/GRAY & GRAY/RED 23 PURPLE/GREEN & GREEN/PURPLE

11 BLACK/BLUE & BLUE/BLACK 24 PURPLE/BROWN & BROWN/PURPLE

12 BLACK/ORANGE & ORANGE/BLACK

13 BLACK/GREEN & GREEN/BLACK

25 PURPLE/GRAY & GRAY/PURPLE

2.6. ENVIRONMENTAL:

2.6.1. OPERATING TEMPERATURE: +10º C (+50° F) TO +35º C (+95°F)

2.6.2. NON-OPERATING TEMPERATURE: -35º C (-31°F) TO +60º C (+140° F)

2.7. RELIABILITY:

2.7.1. MTBF: NOT APPLICABLE

2.8. PART IDENTIFICATION:

2.8.1. VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY VENDOR.

3. PROCURING AGENCY:

3.1.1. THE PROCUREMENT AGENCY RESERVES THE RIGHT TO PERFORM ANY INSPECTION DEEMED

NECESSARY TO BE ASSURED THE PARTS CONFORM TO THE SPECIFIED REQUIREMENTS.

4. THE PART NUMBER IS THE DRAWING NUMBER SUFFIXED WITH THE APPLICABLE DASH NUMBER

SHOWN IN TABLE II.

5. SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

BELDEN (CAGE CODE 3GY56)

RICHMOND, IN

PART NO.: PER TABLE II

TABLE II

DASH

NO.

MFR.

PART NO. LENGTH

201 8125 060100 100 FOOT

SCALE: NONE SHEET 3 OF 3