DWG 2200254-A.pdf

CAGE CODE 0WY55 DWG NO. 2200254 SHEET 1 OF 3

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

WSR-88D A 061213 ECP 0232

ECO A03026 INITIAL RELEASE CWF

VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

WSR-88D RADAR OPERATIONS CENTER

3200 MARSHALL AVENUE

NORMAN, OKLAHOMA 73072-8032

NOMENCLATURE

MILLIMETERS

1 PL ±

2 PL ±

ANGLES ± 2°

INCHES

2 PL ±

3 PL ±

APPROVALS

DWN JCK 061212 RMT JWG 061213

CHK AWB 061213 DOC ARC 061212

ENGR CWF 061213 CM

QA ROC CMJ 061213

CONNECTOR, FEMALE, 50 POS, CRIMP SNAP

SIZE CAGE CODE DWG NO. REV

A 0WY55 2200254 A

SCALE: NONE SHEET 1 OF 3

CAGE CODE 0WY55 DWG NO. 2200254 SHEET 2 OF 3

GENERAL NOTES:

1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.1. IDENTIFICATION OF ANY SUGGESTED SOURCE OF SUPPLY (MANUFACTURER) CONTAINED IN THIS

SPECIFICATION IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR FUTURE AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).

1.2. THE USE OF A DIFFERENT PART FROM A LISTED SUGGESTED SOURCE OF SUPPLY OR A PART FROM A

NON-LISTED SUGGESTED SOURCE OF SUPPLY WHICH MEETS THE SPECIFICATIONS HEREIN SHALL OCCUR ONLY AFTER REVIEW/CONCURRENCE AND A FIRST ARTICLE QUALIFICATION BY THE WSR- 88D RADAR OPERATIONS CENTER (ROC) AS WELL AS ACCEPTANCE INSPECTION BY THE NATIONAL

RECONDITIONING CENTER (NRC).

2. REQUIREMENTS:

2.1. STYLE: STANDARD FEMALE CONNECTOR, 50 POSITION, CRIMP SNAP WIRE TERMINATION.

2.2. OUTLINE VIEW: PER FIGURE 1 AND TABLE I.

2.3. NUMBER OF POSITIONS: 50.

2.4. GENDER: RECEPTACLE (FEMALE).

2.4.1. RECEPTACLE SIZE: RECEPTACLES ACCEPT SIZE 20 DF SOCKET CONTACTS.

2.5. WIRE TERMINATION TYPE: CRIMP SNAP.

2.6. MATING CONNECTOR LOCK: MOUNTING HOLE TYPE.

2.7. SHELL SIZE: 5.

2.8. SHELL TYPE: FRONT METAL SHELL.

2.8.1. SHELL MATERIAL: STEEL.

2.8.2. SHELL PLATING: TIN.

2.9. INSERT MATERIAL: THERMOPLASTIC

2.9.1. INSERT FLAMMABILITY RATING: UL 94V-0.

2.10. PART IDENTIFICATION:

2.10.1. VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY VENDOR.

3. PROCURING AGENCY:

3.1.1. THE PROCUREMENT AGENCY RESERVES THE RIGHT TO PERFORM ANY INSPECTION DEEMED

NECESSARY TO BE ASSURED THE PARTS CONFORM TO THE SPECIFIED REQUIREMENTS.

4. THE PART NUMBER IS THE DRAWING NUMBER SUFFIXED WITH THE APPLICABLE DASH NUMBER

SHOWN IN TABLE II.

5. SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

SCALE: NONE SHEET 2 OF 3

CAGE CODE 0WY55 DWG NO. 2200254 SHEET 3 OF 3

AMP INCORPORATED (CAGE CODE 00779)

HARRISBURG, PA 17105

PART NO.: PER TABLE I

TABLE I

DASH

NO.

CONTACT

SIZE

AMP PART

NUMBER NOTES

201 20 205211-2

OR

1658640-1*

*COMPLIES WITH THE RESTRICTIONS OF CERTAIN HAZARDOUS SUBSTANCES (RoHS) DIRECTIVE.

6. FIGURES AND DIAGRAMS

FIGURE 1

DIMENSIONS IN INCHES

SCALE: NONE SHEET 3 OF 3