DWG 2200049-A.pdf

CAGE CODE 0WY55 DWG NO. 2200049 SHEET 1 OF 3

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

2320208 WSR-88D A 061213 ECP 0232

ECO A03010

REPLACE OBSOLETE -201 PART

NUMBER, ADD -202 CONFIGURATION CWF

VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

WSR-88D RADAR OPERATIONS CENTER

3200 MARSHALL AVENUE

NORMAN, OKLAHOMA 73072-8032

NOMENCLATURE

MILLIMETERS

1 PL ±

2 PL ±

ANGLES ± 2°

INCHES

2 PL ±

3 PL ±

APPROVALS

DWN BOB 981124 RMT NEB 981210

CHK AWB 981124 DOC PJG 981210

ENGR RMM 981210 CM RWH 981210

QA DR 981210 ROC ELB 981210

CONTACT, PIN, SIZE 20 DF, 20-24 AWG, AMPLIMITE

SIZE CAGE CODE DWG NO. REV

A 0WY55 2200049 A

SCALE: NONE SHEET 1 OF 3

CAGE CODE 0WY55 DWG NO. 2200049 SHEET 2 OF 3

GENERAL NOTES:

1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.1. IDENTIFICATION OF ANY SUGGESTED SOURCE OF SUPPLY (MANUFACTURER) CONTAINED IN THIS

SPECIFICATION IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR FUTURE AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).

1.2. THE USE OF A DIFFERENT PART FROM A LISTED SUGGESTED SOURCE OF SUPPLY OR A PART FROM A

NON-LISTED SUGGESTED SOURCE OF SUPPLY WHICH MEETS THE SPECIFICATIONS HEREIN SHALL OCCUR ONLY AFTER REVIEW/CONCURRENCE AND A FIRST ARTICLE QUALIFICATION BY THE WSR- 88D RADAR OPERATIONS CENTER (ROC) AS WELL AS ACCEPTANCE INSPECTION BY THE NATIONAL

RECONDITIONING CENTER (NRC).

2. REQUIREMENTS:

2.1. STYLE: CRIMP REMOVABLE, PRECISION FORMED, PIN (MALE) CONTACT, SIZE 20, USED IN

COMMERCIAL CPC (CIRCULAR PLASTIC) AND METAL SHELL CONNECTORS (AMP INCORPORATED OR

EQUIVALENT).

2.2. OUTLINE VIEW: PER FIGURE 1 AND TABLE I.

2.3. WIRE ACCOMMODATION: PER TABLE I.

2.4. MATERIAL: BRASS PER QQ-B-750.

2.5. FINISH: PER TABLE I.

2.6. CURRENT RATING: 13 AMPS.

2.7. PART IDENTIFICATION:

2.7.1. VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY VENDOR.

3. PROCURING AGENCY:

3.1.1. THE PROCUREMENT AGENCY RESERVES THE RIGHT TO PERFORM ANY INSPECTION DEEMED

NECESSARY TO BE ASSURED THE PARTS CONFORM TO THE SPECIFIED REQUIREMENTS.

4. THE PART NUMBER IS THE DRAWING NUMBER SUFFIXED WITH THE APPLICABLE DASH NUMBER

SHOWN IN TABLE II.

5. SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

AMP INCORPORATED (CAGE CODE 00779)

HARRISBURG, PA 17105

PART NO.: PER TABLE I

TABLE I

DASH

NO.

CONTACT

SIZE

WIRE

ACCOMMODATIONS

(AWG)

AMP PART

NUMBER NOTES

201 20 20, 22, 24 1-66506-0* 1, 3

202 20 20, 22, 24 2-66506-5

OR

1658539-2*

2, 4

SCALE: NONE SHEET 2 OF 3

CAGE CODE 0WY55 DWG NO. 2200049 SHEET 3 OF 3

*COMPLIES WITH THE RESTRICTIONS OF CERTAIN HAZARDOUS SUBSTANCES (RoHS) DIRECTIVE.

NOTES:

1. FINISH: PLATED WITH GOLD FLASH OVER 0.76 μm (.000030) NICKEL.

2. FINISH: PLATED WITH GOLD FLASH IN LOCALIZED GOLD PLATE AREA, TIN PLATED WIRE

BARRELS, OVER 0.76 μm (.000030) NICKEL.

3. LOOSE PIECE FOR HAND TOOL USE ONLY.

4. STRIP FOR MINI-APPLICATOR AND STRIPPER CRIMPER.

6. FIGURES AND DIAGRAMS

FIGURE 1

DIMENSIONS IN INCHES

SCALE: NONE SHEET 3 OF 3