DWG 1217045-G.pdf

CAGE CODE 56232 DWG NO. 1217045 SHEET 1 OF 4

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

MULTIPLE WSR-88D A 891227 CO. A03433 (M) ADD NEW PART NO. JS

B 910416 CO. D18605 (NA) REVISED AND REDRAWN JS

C 920312 CO. DA3616 (NA) REVISED AND REDRAWN JS

D 940428 CO. D01790 (NA) PH

E 950128 ECP MOD 289

CO. F05692 (NA) PT

F 960409 CO. F07157 PT

G 061204 ECO A03073 (U)

DESIGN ACTIVITY TRANSFERRED TO

0WY55

ADD ALTERNATE P/N FOR -201

WA120062560001/REJECTED

PROTOTYPE

D. ROSE

SPECIFICATION CONTROL DRAWING

CURRENT DESIGN ACTIVITY CAGE CODE 0WY55

DOC/DOD/DOT

WSR-88D RADAR OPERATIONS CENTER

3200 MARSHALL AVENUE, NORMAN, OKLAHOMA 73072

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

SIZE CAGE CODE DWG NO. REV

CONTR NO. 50-DMNW-8-00032 LORAL

DEFENSE SYSTEMS-EAST

GREAT NECK, NY 11020

NOMENCLATURE

APPROVALS

DWN J.B. 7-13-89 CHK V.H.B. 8-7-89

QA B.B. 9-26-89 ENG R.B. 8-8-89

STD J.S. 9-25-89 MFG D.P. 8-8-89

R/M

CONNECTOR, COAXIAL, TYPE N PLUG FOR

CORRUGATED SEMI-RIGID CABLE

A 56232 1217045 G

SCALE: NONE SHEET 1 OF 4

CAGE CODE 56232 DWG NO. 1217045 SHEET 2 OF 4

1. GENERAL

1.1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.2. IDENTIFICATION OF ANY SUGGESTED SOURCE(S) (MANUFACTURER) OF SUPPLY HEREON IS NOT TO

BE CONSTRUED AS A GUARANTEE OF PRESENT OR CONTINUED AVAILABILITY AS A SOURCE OF

SUPPLY FOR THE ITEM(S).

2. REQUIREMENTS: PER MIL-C-39012, AS APPLICABLE, MODIFIED BY REQUIREMENTS BELOW.

2.1. MATERIAL

2.1.1. BODY: BRASS PER ASTM B16, ALLOY 360, ½ HARD

2.1.2. DIELECTRIC: PTFE TEFLON PER ASTM D1710

2.1.3. CENTER CONTACT: BRASS PER ASTM B16, ALLOY 360, ½ HARD

2.2. FINISH

2.2.1. BODY: BENZOTRIAZOLE TREATMENT PROCESS

2.3. OUTLINE VIEW: PER FIGURE 1 AND TABLE 1

2.4. INTERFACE: TYPE N PLUG (MALE PIN CENTER CONTACT), INTERFACE DIMENSIONS PER MIL-STD-348, FIG. 304.1

2.5. CABLE TERMINATION: TO BE WRENCH CRIMPED TO SEMI-RIGID COAXIAL CABLE WITH FOAM

DIELECTRIC AND CORRUGATED OUTER CONDUCTOR. CABLE SIZES AND PARTS SHOWN IN TABLE 1.

2.6. IMPEDANCE: 50 OHMS

2.7. FREQUENCY RANGE: DC -5.0 GHz FOR -203

DC -8.8 GHz FOR -201 AND -202

2.8. DIELECTRIC WITHSTANDING VOLTAGE: 2000 VOLTS AC (SEA LEVEL)

2.9. TEMPERATURE: -620ºC TO +600ºC (STORAGE)

-400ºC TO +490ºC (OPERATION)

2.10. IDENTIFICATION: VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY

VENDOR PER MIL-STD-130.

SCALE: NONE SHEET 2 OF 4

CAGE CODE 56232 DWG NO. 1217045 SHEET 3 OF 4

FIGURE 1: OUTLINE VIEW

ALL DIMENSIONS ARE IN INCHES

-201 ALTERNATE CONFIGURATION

TABLE 1

DASH NO. L D CABLE ACCOMODATION

201 3.09 1.03 M28830/3-II (1/2”)

202 2.41 .85 S:1214568-201 (1/2”)

(ANDREW FSJ4-50B)

203 2.96 1.4 M28820/4-II (7/8”)

(FEMALE) 2.51 .91 M28830/3-II (1/2”)

SCALE: NONE SHEET 3 OF 4

CAGE CODE 56232 DWG NO. 1217045 SHEET 4 OF 4

SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

ANDREW CORP. (CAGE CODE 84147)

ORLAND PARK, IL

PART NO.: PER TABLE II

TABLE II

DASH

NO. ANDREW PART NO.

201 L4NM, OR L4PNM-RC, OR L4TNM-PS

202 44ASW

203 L45W

204 L44N (FEMALE)

SCALE: NONE SHEET 4 OF 4