DWG 2200317-B.pdf

CAGE CODE 0WY55 DWG NO. 2200317 SHEET 1 OF 3

SIZE CAGE CODE DWG NO. REV

A 0WY55 2200317 B

SCALE: NONE SHEET 1 OF 3

UNLESS OTHERWISE SPECIFIED

DIMENSIONS ARE IN INCHES

TOLERANCES ON:

WSR-88D RADAR OPERATIONS CENTER

1313 HALLEY CIRCLE

NORMAN, OKLAHOMA 73069-8480

NOMENCLATURE

MILLIMETERS

1 PL

2 PL

ANGLES 2

INCHES

2 PL .06

3 PL .010

APPROVALS

DWN AWB 080808 RMT DTH 080808

CHK BOB 080808 DOC BLT 090318

ENGR JBT 080808 CM

QA ROC

CABLE, 19 SHIELDED PAIRS, 22 AWG 7x30

STRANDING, DRAIN WIRE, PVC JACKET

VENDOR ITEM CONTROL DRAWING

DISTRIBUTION STATEMENT A: APPROVED FOR PUBLIC RELEASE; DISTRIBUTION IS UNLIMITED.

APPLICATION

NHA USED ON LTR DATE ECO ECP REVISION DESCRIPTION APVD

2320188 WSR-88D

A 080808

ECP 0391

ECO A03894

INITIAL RELEASE AT REV A

J.

TURNER

B 090529 ECO A04307

ADD ADDITIONAL SOURCE OF

SUPPLY

G.

SECREST

CAGE CODE 0WY55 DWG NO. 2200317 SHEET 2 OF 3

SCALE: NONE SHEET 2 OF 3

GENERAL NOTES:

1. INTERPRET THIS DRAWING IN ACCORDANCE WITH ASME Y14.100.

1.1. IDENTIFICATION OF ANY SUGGESTED SOURCE OF SUPPLY (MANUFACTURER) CONTAINED IN THIS

SPECIFICATION IS NOT TO BE CONSTRUED AS A GUARANTEE OF PRESENT OR FUTURE AVAILABILITY

AS A SOURCE OF SUPPLY FOR THE ITEM(S).

1.2. THE USE OF A DIFFERENT PART FROM A LISTED SUGGESTED SOURCE OF SUPPLY OR A PART FROM A

NON-LISTED SUGGESTED SOURCE OF SUPPLY WHICH MEETS THE SPECIFICATIONS HEREIN SHALL OCCUR ONLY AFTER REVIEW/CONCURRENCE AND A FIRST ARTICLE QUALIFICATION BY THE WSR- 88D RADAR OPERATIONS CENTER (ROC) AS WELL AS ACCEPTANCE INSPECTION BY THE NATIONAL

RECONDITIONING CENTER (NRC).

2. REQUIREMENTS:

2.1. CONSTRUCTION:

2.1.1. CABLE: 19 PAIR UL STYLE 2919/STYLE 2493 MULTI-CONDUCTOR, 22 AWG STRANDED CONDUCTORS, INDIVIDUALLY SHIELDED.

2.1.2. INNER CONDUCTOR MATERIAL: 22 AWG STRANDED (7x30) TINNED COPPER.

2.1.3. INNER CONDUCTOR INSULATION MATERIAL: POLYPROPYLENE.

2.1.4. INNER CABLE PAIR COLOR CODE: PER TABLE 2.1.4.

TABLE 2.1.4

COLOR CODES

PAIR NO. COLOR COMBINATION PAIR NO. COLOR COMBINATION

1 BLACK AND RED 11 RED AND YELLOW

2 BLACK AND WHITE 12 RED AND BROWN

3 BLACK AND GREEN 13 RED AND ORANGE

4 BLACK AND BLUE 14 GREEN AND WHITE

5 BLACK AND YELLOW 15 GREEN AND BLUE

6 BLACK AND BROWN 16 GREEN AND YELLOW

7 BLACK AND ORANGE 17 GREEN AND BROWN

8 RED AND WHITE 18 GREEN AND ORANGE

9 RED AND GREEN 19 WHITE AND BLUE

10 RED AND BLUE

2.1.5. INNER CONDUCTOR SHIELD MATERIAL: ALUMINUM FOIL-POLYESTER TAPE OR FOIL FREE

ALUMINUM/MYLAR TAPE, 100% COVERAGE.

2.1.6. DRAIN WIRE: 22 AWG STRANDED TIN COPPER.

2.1.7. MOLDED OUTER JACKET: PVC, COLOR OPTIONAL.

2.1.8. MAXIMUM CABLE OVERALL DIAMETER: .62 INCHES

2.1.9. MINIMUM BEND RADIUS: 10 X CABLE DIAMETER.

2.2. ELECTRICAL:

2.2.1. NOMINAL CHARACTER IMPEDANCE: 50/60 OHMS.

2.2.2. NOMINAL INDUCTANCE: 0.18 uH/FT.

CAGE CODE 0WY55 DWG NO. 2200317 SHEET 3 OF 3

SCALE: NONE SHEET 3 OF 3

2.2.3. NOMINAL CAPACITANCE CONDUCTOR TO CONDUCTOR AT 1KHz: 30 Pf/ft OR BETTER.

2.2.4. NOMINAL CAPACITANCE CONDUCTOR TO OTHER CONDUCTOR AND SHIELD AT 1KHz: 55 Pf/ft OR

BETTER.

2.2.5. NOMINAL VELOCITY PROPAGATION: 66%.

2.2.6. INDIVIDUAL PAIR NOMINAL CONDUCTOR DC RESISTANCE AT 20° C: 16.6 OHMS/1000 ft OR BETTER.

2.2.7. MAXIMUM OPERATING VOLTAGE: 30 V RMS (UL AWM STYLE 2919), 300 V RMS (CM)

2.2.8. MAXIMUM RECOMMENDED CURRENT: 1 AMP PER CONDUCTOR AT 25° C.

2.3. ENVIRONMENTAL:

2.3.1. OPERATING TEMPERATURE: +10º C (+50° F) TO +35º C (+95°F)

2.3.2. NON-OPERATING TEMPERATURE: -35º C (-31°F) TO +60º C (+140° F)

2.4. RELIABILITY:

2.4.1. MTBF: N/A

2.5. PART IDENTIFICATION:

2.5.1. VENDOR IDENTIFICATION AND VENDOR PART NUMBER TO BE APPLIED BY VENDOR. PART NUMBER

MAY BE APPLIED TO PACKAGING.

3. PROCURING AGENCY:

3.1.1. THE PROCUREMENT AGENCY RESERVES THE RIGHT TO PERFORM ANY INSPECTION DEEMED

NECESSARY TO BE ASSURED THE PARTS CONFORM TO THE SPECIFIED REQUIREMENTS.

4. THE PART NUMBER IS THE DRAWING NUMBER SUFFIXED WITH THE APPLICABLE DASH NUMBER

SHOWN IN TABLE II.

5. SUGGESTED SOURCE(S) OF SUPPLY (MANUFACTURER(S)):

BELDEN WIRE AND CABLE (CAGE CODE 55494)

ESSEX JUNCTION, VT

PART NO.: PER TABLE II

ALPHA WIRE COMPANY (CAGE CODE 92194)

ELIZABETH, NJ

PART NO.: PER TABLE II

TABLE II

DASH

NO.

BELDEN

PART NO.

ALPHA

PART NO.

LENGTH

201 8769-060500 6020C AS REQUIRED