08 71 00 - DOOR HARDWARE Specs.pdf

IDG - FBGS Updated: 8 April 2022

SECTION 08 71 00 PAGE 1 OF 16

DIVISION 08 - OPENINGS

SECTION - 08 71 00

DOOR HARDWARE

PART 1 GENERAL

1.1 SD-03 PRODUCT DATA: Submit product data for all Hardware Items.

1.2 SD-11 CLOSEOUT SUBMITTALS:

a. Submit directly to the DPW Lock Shop or Specialty Shop Supervisor prior to beneficial occupancy in coordination with the COR:

i. Keying Schedule and Bitting List that lists all key combinations within the system. The bitting list should come from the manufacturer The bitting list

IS NOT a key layout of a facility

1. If other than Best Locks are being used (compatible) than the bitting list needs to be provided

ii. Core Control keys

b. Submit directly to the DPW Real Property prior to beneficial occupancy in coordination with the COR:

i. Master Keys

ii. Building or Change Keys.

1.3 LOCKSMITH QUALIFICATIONS: Door hardware and final cores shall be installed by a licensed locksmith.

1.4 DELIVERY, STORAGE, AND HANDLING: Deliver hardware in original individual containers, complete with necessary appurtenances including fasteners and instructions.

Mark each individual container with item number as shown on the hardware schedule.

PART 2 PRODUCTS

2.1 GENERAL: Hardware shall be compatible with Best Core Compatible. Clearly and permanently mark with the manufacturer’s name or trademark on, hinges, pivots, locks, latches, exit devices, bolts and closers where the identifying mark is visible after the item is installed. For closers with covers, the name or trademark may be beneath the cover.

2.2 TEMPLATE HARDWARE: Hardware applied to metal or to prefinished doors shall be manufactured using a template. Provide templates to door and frame manufacturers in accordance with ANSI/BHMA A156.7. Coordinate hardware items to prevent interference with other hardware.

SECTION 08 71 00 PAGE 2 OF 16

2.3 HARDWARE FOR FIRE DOORS AND EXIT DOORS: Provide all hardware necessary to meet the requirements of NFPA 72 for door alarms, NFPA 80 for fire doors, NFPA

101 for exit doors, NFPA 252 for fire tests of door assemblies, ABA/ADA accessibility requirements, and all other requirements indicated, even if such hardware is not specifically mentioned. Provide Underwriters Laboratories, Inc. labels for such hardware in accordance with UL Bld Mat Dir or equivalent labels in accordance with another testing laboratory approved in writing by the Contracting Officer Representative.

2.4 FULL MORTISE HINGES: Provide in accordance with ANSI/BHMA A156.1 typical.

Provide hinges that are 4 1/2 by 4 1/2 inch with square corners unless otherwise indicated. Construct loose pin hinges for interior doors and reverse-bevel exterior doors so that pins are non-removable when door is closed. Provide Full Mortise, A8111, Grade

1 hinges, material 626 for interior doors, Full Mortise, A5111, Grade 1 hinges, material

630 for exterior steel doors; and Full Mortise, A2111, Grade 1 hinges, material 612 for exterior wood doors unless otherwise noted. Provide two hinges for doors 60 inches or less in height and one additional hinge for each additional 30 inches or fraction thereof of door height.

2.5 CONTINUOUS HINGES: Provide in accordance with BHMA A156.26. Listed under

Category N. Minimum 0.120-inch thick, hinge leaves with minimum overall width of 4 inches fabricated to full height of door and frame as recommended by the Manufacturer.

Continuous Geared Hinges shall be extruded-aluminum, geared hinge leaves shall be joined by a continuous extruded-aluminum channel cap with concealed, self-lubricating thrust bearings.

2.6 MORTISE LOCKS AND LATCHES: Provide in accordance with ANSI/BHMA

A156.13. Provide mortise locks with escutcheons not less than 7 by 2 1/4 inches with a bushing at least 1/4 inch long. Cut escutcheons to fit cylinders and provide trim items with straight, beveled, or smoothly rounded sides, corners, and edges. Provide knobs and roses of mortise locks with screwless shanks and no exposed screws. Provide, Series

1000, Operational Grade 1, Extra Heavy Duty, UL listed, and Security Grade 2 unless otherwise noted. Locking hub shall be multi-position for easy handing and function change without opening the lock case. Lock function to be configurable in the field without opening the lock case. Spindle if forced shall twist and then break to prevent forced entry and damage to internal parts.

2.7 BORED LOCKS AND LATCHES: Provide in accordance with ANSI/BHMA A156.2, Series 4000, Lever, Grade 1, and be UL listed. If the lever is forced to the breaking point, the key shall still retract the latch to allow authorized entry and the inside lever shall be fully functional. Key release cam assembly shall be a replaceable part. Keyed lever to be removable only after core is removed, by authorized control key, to allow access to lever

“keeper”. There shall not be an exposed lever keeper hole in the outside lever.

SECTION 08 71 00 PAGE 3 OF 16

2.8 EXIT DEVICES: Where required by NFPA 101, provide rim type, unless otherwise noted, exit devices in accordance with ANSI/BHMA A156.3, Grade 1. Provide adjustable strikes. Provide vandal resistant escutcheons not less than 7 by 2-1/4 with lever.

2.9 CYLINDERS AND CORES: Provide Best Compatible Cylinders for new locks, including locks provided under other sections of this specification. Provide fully compatible cylinders of Grade 1 products. Core shall be Best Compatible and from the same manufacturer as cylinder with interchangeable cores removable by a control key.

Factory set the cores with seven pin tumblers using the A4 system and Cormax Patented keyway. Submit a core code sheet with the cores. Typical unless otherwise noted.

2.10 HIGH SECURITY CYLINDERS: Provide in accordance with ANSI/BHMA A156.30, security level C for all high security cylinder components.

2.11 LOCK TRIM: Provide cast, forged, or heavy wrought construction and commercial plain design for lock trim.

2.12 LEVER HANDLES: Provide lever handles in accordance with ANSI/BHMA A156.3 and

Architectural Barriers Act. Provide lever handle locks with vandal resistance feature to prevent irreparable damage to the lock when force in excess of that specified in

ANSI/BHMA A156.13 is applied to the lever handle. Provide lever handles return to within 1/2 inch of the door face.

2.13 KEYS: Provide two file keys, two duplicate keys, and one working key for each key change and for each master and grand master keying system, as well as 2 blanks.

2.14 INTERIOR DOOR CLOSER: Provide cast iron surface closers modern type with cover, hinge side mounting, C02021 X PT 4C, PT 4D and PT 4G adjustable closing force up to

50% additional, adjustable hydraulic backcheck, and built in factory Spring stop where parallel arm and stop are required.

2.15 OUTSWINGING EXTERIOR DOOR CLOSER: Provide cast iron surface closers modern type with cover, parallel arm mounting, C02021 X PT 4C, PT 4D and PT 4G adjustable closing force up to 50% additional, adjustable hydraulic backcheck, and built in factory Spring stop.

2.16 PULL PLATE: Provide in accordance with ANSI/BHMA A156.6, Thickness 0.125 inch, J407.

2.17 PUSH PLATE: Provide in accordance with ANSI/BHMA A156.6, Thickness 0.125 inch, J304.

2.18 PROTECTION PLATE: 2 inch less than door width for single doors; 1 inch less than door width for pairs of doors. Provide 10 inch high kick plates for flush doors and 1 inch less than height of bottom rail for panel doors. Provide a minimum of 48 inch armor

SECTION 08 71 00 PAGE 4 OF 16

plates for flush doors except 16 inch high armor plates on fire doors. Provide 6 inch mop plates.

2.19 KICK PLATE: Provide in accordance with ANSI/BHMA A156.6, Thickness 0.125 inch, J103.

2.20 MOP PLATE: Provide in accordance with ANSI/BHMA A156.6, Thickness 0.125 inch, J102.

2.21 ARMOR PLATE: Provide in accordance with ANSI/BHMA A156.6, Thickness 0.125 inch, J101.

2.22 EDGE GUARDS: Provide edge guard the same height as armor plate applied to hinge stile.

2.23 DOOR STOPS: Provide in accordance with ANSI/BHMA A156.16, wall type bumper, L52101 unless otherwise noted.

2.24 DOORS SILENCERS: Provide in accordance with ANSI/BHMA A156.16, L03011.

Provide three silencers for each single door, two for each pair.

2.25 THRESHOLDS: Provide stainless steel transitions between tile, carpet or resilient flooring where the height of the transition exceeds 1/2 inch. Provide carrera marble transitions where the height of the transition is less than 1/2 inch Categorize marble

Group A as classified by MIA Design Manual. Provide a fine sand-rubbed finish marble, white in color. Provide minimum 12.0 marble abrasion when tested in accordance with

ASTM C241/C241M. Provide transition strips that comply with 36 CFR 1191 requirements. Provide threshold equal in depth equal to jamb depth. Provide in accordance with ABA 303 & 404.2.5.

2.26 WEATHERSTRIPPING GASKETING: Provide in accordance with ANSI/BHMA

A156.22 for all exterior doors. Provide a set to include head and jamb seals, sweep strips, and for pairs of doors, astragals. Air leakage of weather-stripped doors not to exceed 1.25 cubic feet per minute of air per square foot of door area when tested in accordance with

ASTM E283.

2.27 ASTRAGALS: For pairs of exterior steel doors which will not have removable mullions, provide overlapping steel astragals with the doors. For interior pairs of fire rated and smoke control doors, provide stainless steel astragals complying with NFPA 80 for fire rated assemblies and NFPA 105 for smoke control assemblies.

2.28 FASTENERS: Provide fasteners of type, quality, size, and quantity appropriate to the specific application. Fasteners finish shall match hardware. Provide stainless steel fasteners. Verify metals in contact with one another are compatible and will avoid galvanic corrosion when exposed to weather.

SECTION 08 71 00 PAGE 5 OF 16

2.29 FINISHES: Provide in accordance with ANSI/BHMA A156.18. Provide hardware in

BHMA 630 finish (satin stainless steel), unless specified otherwise. Provide items not manufactured in stainless steel in BHMA 626 finish (satin chromium plated) over brass or bronze. Match exposed parts of closers to lock and door trim.

PART 3 EXECUTION

3.1 INSTALLATION: Install hardware in accordance with manufactures specifications using the manufacture recommended fasteners. The layout, ordering, receiving, installation and or modification of locks, key ways, cores and associated hardware is the responsibility of the contractor. Provides keys and bitting information to the COR. Provide X-25 keys for

Mechanical Rooms and X-24 keys for Communication Rooms.

3.2 EXAMINATION: Provide hardware in accordance with manufacturers' printed installation instructions. Fasten hardware to wood surfaces with full-threaded wood screws or sheet metal screws. Provide machine screws set in expansion shields for fastening hardware to solid concrete and masonry surfaces.

3.3 FIRE DOORS AND EXIT DOORS: Provide hardware in accordance with NFPA 72 for door alarms, NFPA 80 for fire doors, and NFPA 101 for exit doors, and NFPA 252 for fire tests of door assemblies.

3.4 HARDWARE SETS

0.1 (Exterior Double Door on Egress Path with Exit Device, Key Locks and Unlocks)

ANSI

BHMA

QUANTITY DESCRIPTION MATERIAL

& FINISH

Left Leaf

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal Resistant Lever Trim.

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Frame Integral Seal

156.16 1 - Each Door Holder, Lever Type, L51381 626

Right Leaf

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

SECTION 08 71 00 PAGE 6 OF 16

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal resistant Lever Trim.

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Frame Integral Seal

156.16 1 - Each Door Holder, Lever Type, L51381 626

0.2 (Exterior Door on Egress Path with Exit Device, Night Latch, Key Locks and

Unlocks)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal resistant Lever Trim.

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101

0.3 (Double Exterior Door, Removable Center Mullion)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Left Leaf

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

SECTION 08 71 00 PAGE 7 OF 16

Right Leaf

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

0.4 (Exterior Door)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

0.5 (Double Exterior Door Mechanical Room, Removable Center Mullion)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Left Leaf

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

156.16 1 - Each Door Stop: Lever Type, L01381

Right Leaf

SECTION 08 71 00 PAGE 8 OF 16

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

156.16 1 - Each Door Stop: Lever Type, L01381

0.6 (Exterior Door Mechanical Room)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

0.7 (Double Exterior Door, No Removable Center Mullion)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Left Leaf (Inactive Leaf)

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

156.16 1 - Each Door Stop: Lever Type, L01381

156.16 Opening Door Frame Integral Seal

156.16 Bottom Plunger Type, L51421 654

156.16 Top Surface, L54161 654

156.22 1 - Each Overlapping Astragal 654

Right Leaf (Active Leaf)

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

SECTION 08 71 00 PAGE 9 OF 16

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, F04 Entry Lock

0.8 (Exterior Door on Egress Path with Exit Device, Night Latch, Key Locks and

Unlocks)

QUANTITY DESCRIPTION MATERIAL

& FINISH

(Active Leaf)

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 654

156.3 1 - Each Exit Device: Type 2 Surface Vertical Rod

Exit Device, Function 10, Push Pad, Side

Latching, Vandal Resistant Lever Trim.

156.16 1 - Each Door Stop: Lever Type, L01381 626

156.16 Opening Door Frame Integral Seal

(Inactive Leaf)

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 654

156.16 1 - Each Door Stop: Lever Type, L01381 626

156.16 Opening Door Frame Integral Seal

156.16 Top Surface, L54161 654

156.16 Bottom Plunger Type, L51421 654

156.22 1 - Each Overlapping Astragal 654

0.9 (Exterior Door, Existing Aluminum Door on Egress Path with Exit Device, Night

Latch, Key Locks and Unlocks)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, C32011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.16 Opening Door Frame Integral Seal

156.41 1- Each Single Operation Egress Unlatch Lockset

Push Paddle Handle for Storefront Doors

3.3 (Exterior Door with Keypad)

SECTION 08 71 00 PAGE 10 OF 16

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.26 1 - Each Continuous Gear Hinge: Full Mortise, 31021G, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G (Interior Mounted)

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Extra-Heavy Duty, Security Grade

2, Keypad Entry Lock w/deadbolt

1.1 (Interior Double Door on Egress Path with Exit Device, Removable Center Mullion,)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Left Leaf

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal Resistant Lever Trim, Night Latch, Key Retracts Latchbolt.

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Silencer: L03011

156.16 1 - Each Door Holder, Lever Type, L51381 626

Right Leaf

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal resistant Lever Trim, Night Latch, Key Retracts Latchbolt.

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1 - Each Kickplate: J102, Thickness .125 Inch 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Silencer: L03011

SECTION 08 71 00 PAGE 11 OF 16

1.2 (Interior Door on Egress Path with Exit Device, Night Latch, Key Retracts Latchbolt)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.3 1 - Each Exit Device: Type 1 Rim Exit Device, Function 10, Push Pad, Side Latching, Vandal resistant Lever Trim, Night Latch, Key Retracts Latchbolt

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Kickplate: J102, Thickness .125 Inch 626

2.1 (Business / Assembly < 50p / Residential, Secure Lock)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F21

Room Door Lock

2.2 (Business / Assembly < 50p / Residential, Secure Lock, Swing Clear)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise – Standard Weight –

Antifriction Bearing Swing Clear - A8122, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Armor Plate: J101, Thickness .125 Inch 654

SECTION 08 71 00 PAGE 12 OF 16

Grade 1, Heavy Duty, Security Grade 2, F21

Room Door Lock

156.16 1 - Each Combination Stop and Holder, Wall Type with Automatic Hold-Open Operation, L51291

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 654

2.3 (Interior Door with Keypad)

BHMA

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, Keypad Entry Lock w/deadbolt

2.4 (Business / Assembly < 50p / Residential, Non-Secure Space)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Kickplate: J102, Thickness .125 Inch 626

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F01

Passage

156.16 1 - Each Door Stop: Wall Type Bumper, L52101

156.22 Opening Door Gasketing and Edge Seal Systems:

Provide manufacturer standard door

Gasketing and edge seal systems to provide the STC rating specified, or if not noted to match the wall assembly STC rating.

2.5 (Double Door Secure Storage Space / Interior Mechanical Room)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Active Leaf

SECTION 08 71 00 PAGE 13 OF 16

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

Grade 1, Heavy Duty, Security Grade 2, F07

Storeroom or Closet Lock

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Silencer: L03011

156.16 1 - Each Door Holder, Lever Type, L51381 626

Inactive Leaf

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 2 - Each Bolts: Surface Mounted Slide Bolt, L54161 654

2.6 (Secure Storage Space / Interior Mechanical Room)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F07

Storeroom or Closet Lock

2.7 (Secure Storage Space / Interior Mechanical Room, Swing Clear)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise - Heavy Weight –

Antifriction Bearing Swing Clear - A8121, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1- Each Armor Plate: J101, Thickness .125 Inch 654

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F07

Storeroom or Closet Lock

156.15 1- Each Electromagnetic Release Device, C10111 626

2.8 (Double Door Non-Secure Storage Space)

QUANTITY DESCRIPTION MATERIAL

& FINISH

Active Leaf

SECTION 08 71 00 PAGE 14 OF 16

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

Grade 1, Heavy Duty, Security Grade 2, F01

Passage or Closet Latch

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 Opening Door Silencer: L03011

156.16 1 - Each Door Holder, Lever Type, L51381 626

Inactive Leaf

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 626

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.16 2 - Each Bolts: Surface Mounted Slide Bolt, L54161 626

2.9 (Non-Secure Storage Space)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F01

Closet Lock

2.10 (Interior Public Latrine STC 50)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.6 1 - Each Kickplate: J102, Thickness .125 inch 654

156.6 1 - Each Mop Plate: J103, Thickness .125 inch 654

156.6 1 - Each Push Plate: Thickness .125 inch - J30 654

156.6 1 - Each Pull Plate: Thickness .125 inch - J407 654

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.22 Opening Door Gasketing and Edge Seal Systems:

Provide manufacturer standard door

Gasketing and edge seal systems to provide

1-Each Threshold: Marble depth equal to jamb depth. Provide in accordance with ABA 15

303 & 404.2.5.

SECTION 08 71 00 PAGE 15 OF 16

2.11 (Interior Single Occupancy Latrine STC 50)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Full Mortise, A8111, Grade 1 654

156.13 1- Each Lockset: Mortise, Series 1000, Operational

Grade 1, Heavy Duty, Security Grade 2, F22

Privacy Bath Lock with Occupancy

Indicator.

156.6 1 - Each Kickplate: J102, Thickness .125 inch 654

156.6 1 - Each Mop Plate: J103, Thickness .125 inch 654

156.16 1 - Each Door Stop: Wall Type Bumper, L52101

156.22 Opening Door Gasketing and Edge Seal Systems:

Provide manufacturer standard door

Gasketing and edge seal systems to provide

1-Each Threshold: Marble depth equal to jamb depth. Provide in accordance with ABA 15

303 & 404.2.5.

3.1 (Interior Business / Assembly < 50p, Secure Open Storage entry man door provide in accordance with DoDM 5200.01-V3 having a lock conforming to Federal Specification

FF-L-2740, STC-50)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Heavy Weight Full Mortise, A8111, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.13 1 - Each Lockset: Provide LKM 7003, or approved equal

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.23 1- Each Door Gasketing and Edge Seal Systems:

Provide manufacturer standard door

Gasketing and edge seal systems to provide

156.22 Opening Electromechanical Combination Locks:

Provide CDX-10, or approved equal

SECTION 08 71 00 PAGE 16 OF 16

Opening Access Control: Provide HSSD (IDS) High

Security Switch, C-Cure 9000 or approved equal.

Opening HID, pivClass RK40 Pin Keypad Type with

Contactless proximity reader

3.2 (Interior Business / Assembly < 50p, Secure Open Storage interior server man door provide in accordance with DoDM 5200.01-V3 having a lock conforming to Federal

Specification FF-L-2740, STC-50)

QUANTITY DESCRIPTION MATERIAL

& FINISH

156.1 3 - Each Hinges: Heavy Weight Full Mortise, A8111, Grade 1

156.4 1- Each Surface Closer: Modern Type with Cover, Hinge Side Mounting, CO2011, PT 4C, PT

4D, PT 4G

156.13 1 - Each Lockset: Provide LKM 7000, or approved equal

156.16 1 - Each Door Stop: Wall Type Bumper, L52101 626

156.22 Opening Electromechanical Combination Locks:

Provide CDX-10, or approved equal

Opening Access Control: Provide HSSD (IDS) High

Security Switch, C-Cure 9000 or approved equal.

Opening HID, pivClass R40 Contactless proximity reader