Ti nker AFB, OK TAFB Techni cal Spr ci f i cat i ons 2019

SECTI ON 08 11 13

STEEL DOORS AND FRAMES

PART 1 GENERAL

1. 1 REFERENCES

The publ i cat i ons l i s t ed bel ow f or m a par t of t hi s speci f i cat i on t o t he ext ent r ef er enced. The publ i cat i ons ar e r ef er r ed t o i n t he t ext by t he basi c desi gnat i on onl y.

AMERI CAN WELDI NG SOCI ETY ( AWS)

AWS D1. 1/ D1. 1M ( 2015; Er r at a 1 2015; Er r at a 2 2016) St r uct ur al Wel di ng Code - St eel

ASTM I NTERNATI ONAL ( ASTM)

ASTM A653/ A653M ( 2015; E 2016) St andar d Speci f i cat i on f or St eel Sheet , Zi nc- Coat ed ( Gal vani zed) or Zi nc- I r on Al l oy- Coat ed ( Gal vanneal ed) by t he Hot - Di p Pr ocess

ASTM A879/ A879M ( 2012) St andar d Speci f i cat i on f or St eel Sheet , z i nc Coat ed by t he El ect r ol yt i c Pr ocess f or Appl i cat i ons Requi r i ng Desi gnat i on of t he Coat i ng Mass on Each Surface

ASTM A924/ A924M ( 2016a) St andar d Speci f i cat i on f or Gener al Requi r ement s f or St eel Sheet , Met al l i c- Coat ed by t he Hot - Di p Pr ocess

ASTM C578 ( 2016) St andar d Speci f i cat i on f or Ri gi d, Cel l ul ar Pol yst yr ene Ther mal I nsul at i on

ASTM C591 ( 2016) St andar d Speci f i cat i on f or Unf aced Pr ef or med Ri gi d Cel l ul ar Pol y i socyanur at e Ther mal I nsul at i on

ASTM C612 ( 2014) Mi ner al Fi ber Bl ock and Boar d Ther mal I nsul at i on

ASTM D2863 ( 2013) Measur i ng t he Mi ni mum Oxygen Concent r at i on t o Suppor t Candl e- Li ke Combust i on of Pl ast i cs ( Oxygen I ndex)

ASTM E1300 ( 2016) St andar d Pr act i ce f or Det er mi ni ng Load Resi st ance of Gl ass i n Bui l di ngs

ASTM E283 ( 2004; R 2012) Det er mi ni ng t he Rat e of Ai r Leakage Thr ough Ext er i or Wi ndows, Cur t ai n Wal l s, and Door s Under Speci f i ed Pr essur e Di f f er ences Acr oss t he Speci men

ASTM F2248 ( 2012) St andar d Pr act i ce f or Speci f y i ng an

Apr i l 2019 Page 1 SECTI ON 08 11 13

Equi val ent 3- Second Dur at i on Desi gn Loadi ng f or Bl ast Resi st ant Gl azi ng Fabr i cat ed wi t h Lami nat ed Gl ass

BUI LDERS HARDWARE MANUFACTURERS ASSOCI ATI ON ( BHMA)

ANSI / BHMA A156. 115 ( 2016) Har dwar e Pr epar at i on i n St eel Door s and St eel Fr ames

NATI ONAL ASSOCI ATI ON OF ARCHI TECTURAL METAL MANUFACTURERS ( NAAMM)

NAAMM HMMA HMM ( 1999; R2000) Hol l ow Met al Manual

NATI ONAL FI RE PROTECTI ON ASSOCI ATI ON ( NFPA)

NFPA 105 ( 2016) St andar d f or I nst al l at i on of Smoke Door Assembl i es and Ot her Openi ng Protectives

NFPA 252 ( 2017) St andar d Met hods of Fi r e Test s of Door Assembl i es

NFPA 80 ( 2016) St andar d f or Fi r e Door s and Ot her Openi ng Pr ot ect i ves

STEEL DOOR I NSTI TUTE ( SDI / DOOR)

SDI / DOOR 111 ( 2009) Recommended Sel ect i on and Usage Gui de f or St andar d St eel Door s, Fr ames and Accessories

SDI / DOOR 113 ( 2001; R2006) St andar d Pr act i ce f or Det er mi ni ng t he St eady St at e Ther mal Tr ansmi t t ance of St eel Door and Fr ame Assemblies

SDI / DOOR A250. 11 ( 2001) Recommended Er ect i on I nst r uct i ons f or St eel Fr ames

SDI / DOOR A250. 3 ( 2007; R 2011) Test Pr ocedur e and Accept ance Cr i t er i a f or Fact or y Appl i ed Fi ni sh Pai nt ed St eel Sur f aces f or St eel Door s and Fr ames

SDI / DOOR A250. 4 ( 2011) Test Pr ocedur e and Accept ance Cr i t er i a f or Physi cal Endur ance f or St eel Door s and Har dwar e Rei nf or ci ng

SDI / DOOR A250. 6 ( 2003; R2009) Recommended Pr act i ce f or Har dwar e Rei nf or ci ng on St andar d St eel Door s and Fr ames

SDI / DOOR A250. 8 ( 2003; R2008) Recommended Speci f i cat i ons f or St andar d St eel Door s and Fr ames

UNDERWRI TERS LABORATORI ES ( UL)

UL 10C ( 2016) UL St andar d f or Saf et y Posi t i ve Pr essur e Fi r e Test s of Door Assembl i es

Apr i l 2019 Page 2 SECTI ON 08 11 13

1. 2 SUBMITTALS

Gover nment appr oval i s r equi r ed f or submi t t al s wi t h a " G" desi gnat i on;

submi t t al s not havi ng a " G" desi gnat i on ar e f or Cont r act or Qual i t y Cont r ol appr oval . Submi t t he f ol l owi ng i n accor dance wi t h Sect i on 01 33 00

SUBMI TTAL PROCEDURES:

SD- 02 Shop Dr awi ngs

Door s; G

Fr ames; G

Accessories

Show el evat i ons, const r uct i on det ai l s, met al gages, har dwar e pr ovi s i ons, met hod of gl azi ng, and i nst al l at i on det ai l s.

Schedul e of door s; G

Schedul e of f r ames; G

Submi t door and f r ame l ocat i ons.

SD- 03 Pr oduct Dat a

Door s; G

Fr ames; G

Accessories

Submi t manuf act ur er ' s descr i pt i ve l i t er at ur e f or door s, f r ames, and accessor i es. I ncl ude dat a and det ai l s on door const r uct i on, panel ( i nt er nal ) r ei nf or cement , i nsul at i on, and door edge const r uct i on. When " cust om hol l ow met al door s" ar e pr ovi ded i n l i eu of " st andar d st eel door s, " pr ovi de addi t i onal det ai l s and dat a suf f i c i ent f or compar i son t o SDI / DOOR A250. 8 r equi r ement s.

1. 3 DELI VERY, STORAGE, AND HANDLI NG

Del i ver door s, f r ames, and accessor i es undamaged and wi t h pr ot ect i ve wr appi ngs or packagi ng. St r ap knock- down f r ames i n bundl es. Pr ovi de t empor ar y st eel spr eader s secur el y f ast ened t o t he bot t om of each wel ded f r ame. St or e door s and f r ames on pl at f or ms under cover i n c l ean, dr y, vent i l at ed, and accessi bl e l ocat i ons, wi t h 1/ 4 i nch ai r space bet ween door s. Remove damp or wet packagi ng i mmedi at el y and wi pe af f ect ed sur f aces dr y. Repl ace damaged mat er i al s wi t h new.

PART 2 PRODUCTS

2. 1 STANDARD STEEL DOORS

SDI / DOOR A250. 8, except as speci f i ed ot her wi se. Pr epar e door s t o r ecei ve door har dwar e as speci f i ed i n Sect i on 08 71 00. Under cut wher e i ndi cat ed. Ext er i or door s shal l have t op edge cl osed f l ush and seal ed t o

Apr i l 2019 Page 3 SECTI ON 08 11 13 pr event wat er i nt r usi on. Door s shal l be 1- 3/ 4 i nch t hi ck, unl ess ot her wi se i ndi cat ed. Pr ovi de ext er i or gl azi ng i n accor dance wi t h ASTM F2248 and ASTM E1300.

2. 1. 1 Cl assi f i cat i on - Level , Per f or mance, Model

2. 1. 1. 1 Heavy Dut y Door s

SDI / DOOR A250. 8, Level 2, physi cal per f or mance Level B, Model 1, wi t h cor e const r uct i on as r equi r ed by t he manuf act ur er , of s i ze( s) and desi gn( s) i ndi cat ed. Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s shal l be f i l l ed wi t h mi ner al boar d i nsul at i on. Pr ovi de Level 2 wher e i ndi cat ed.

2. 1. 1. 2 Ext r a Heavy Dut y Door s

SDI / DOOR A250. 8, Level 3, physi cal per f or mance Level A, Model 1 wi t h cor e const r uct i on as r equi r ed by t he manuf act ur er f or i ndi cat ed ext er i or door s, of s i ze( s) and desi gn( s) i ndi cat ed. Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s shal l be f i l l ed wi t h mi ner al boar d i nsul at i on. Pr ovi de Level 3 wher e i ndi cat ed.

2. 1. 1. 3 Maxi mum Dut y Door s

SDI / DOOR A250. 8, Level 4, physi cal per f or mance Level A, Model 1 wi t h cor e const r uct i on as r equi r ed by t he manuf act ur er f or i ndi cat ed ext er i or door s, of s i ze( s) and desi gn( s) i ndi cat ed. Wher e ver t i cal st i f f ener cor es ar e r equi r ed, t he space bet ween t he st i f f ener s shal l be f i l l ed wi t h mi ner al boar d i nsul at i on. Pr ovi de Level 4 wher e i ndi cat ed.

2. 2 CUSTOM HOLLOW METAL DOORS

Pr ovi de cust om hol l ow met al door s wher e nonst andar d st eel door s ar e i ndi cat ed. At t he Cont r act or ' s opt i on, cust om hol l ow met al door s may be pr ovi ded i n l i eu of st andar d st eel door s. Door s i ze( s) , desi gn( s) , mat er i al s, const r uct i on, gages, and f i ni sh shal l be as speci f i ed f or st andar d st eel door s and shal l compl y wi t h t he r equi r ement of NAAMM HMMA HMM. Fi l l al l spaces i n door s wi t h i nsul at i on. Cl ose t op and bot t om edges wi t h st eel channel s not l i ght er t han 16 gage. Cl ose t ops of ext er i or door s f l ush wi t h an addi t i onal channel and seal t o pr event wat er i nt r usi on. Pr epar e door s t o r ecei ve har dwar e speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE. Under cut door s wher e i ndi cat ed. Door s shal l be 1- 3/ 4 i nch t hi ck, unl ess ot her wi se i ndi cat ed.

2. 3 I NSULATED STEEL DOOR SYSTEMS

I nsul at ed st eel door s shal l have a cor e of pol yur et hane f oam and an R f act or of 10. 0 or mor e ( based on a k val ue of 0. 16) ; f ace sheet s, edges, and f r ames of gal vani zed st eel not l i ght er t han 20 gage, 16 gage, and 16 gage r espect i vel y; magnet i c weat her st r i ppi ng; nonr emovabl e- pi n hi nges;

t her mal - br eak al umi num t hr eshol d; and vi nyl door bot t om. Door s and f r ames shal l r ecei ve phosphat e t r eat ment , r ust - i nhi bi t i ve pr i mer , and baked acr yl i c enamel f i ni sh. Door s shal l have been t est ed i n accor dance wi t h SDI / DOOR A250. 4 and shal l have met t he r equi r ement s f or Level C. Pr epar e door s t o r ecei ve speci f i ed har dwar e. Door s shal l be 1- 3/ 4 i nch t hi ck.

2. 4 SOUND RATED STEEL DOORS

Door s shal l have a Sound Tr ansmi ssi on Cl ass ( STC) as i ndi cat ed on t he drawings.

Apr i l 2019 Page 4 SECTI ON 08 11 13

2. 5 ACCESSORIES

2. 5. 1 Shel ves f or Dut ch Door s

SDI / DOOR 111. Fabr i cat e shel ves of st eel not l i ght er t han 16 gage, of t he s i ze i ndi cat ed. Br acket s shal l be st ock t ype f abr i cat ed of t he same met al used t o f abr i cat e shel ves.

2. 5. 2 Louvers

2. 5. 2. 1 I nt er i or Louver s

SDI / DOOR 111, Louver s shal l be st at i onar y s i ght pr oof t ype wher e schedul ed.

Det achabl e mol di ngs on r oom or non secur i t y s i de of door ; on secur i t y s i de of door , mol di ngs t o be i nt egr al par t of l ouver . For m l ouver f r ames of 20 gage st eel and l ouver bl ades of a mi ni mum 24 gage. Si ght pr oof l ouver s t o be i nver t ed " V" bl ade desi gn wi t h mi ni mum 55 per cent net - f r ee opening.

2. 5. 3 Astragals

For pai r s of ext er i or st eel door s whi ch wi l l not have al umi num ast r agal s or r emovabl e mul l i ons, as speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE pr ovi de over l appi ng st eel ast r agal s wi t h t he door s. For i nt er i or pai r s of f i r e r at ed door s, pr ovi de st ai nl ess st eel ast r agal s compl yi ng wi t h NFPA 80 f or f i r e r at ed assembl i es.

2. 5. 4 Moldings

Pr ovi de mol di ngs ar ound gl ass of i nt er i or and ext er i or door s and l ouver s of i nt er i or door s. Pr ovi de nonr emovabl e mol di ngs on out si de of ext er i or door s and on cor r i dor s i de of i nt er i or door s. Ot her mol di ngs may be st at i onar y or r emovabl e. Secur e i nsi de mol di ngs t o st at i onar y mol di ngs, or pr ovi de snap- on mol di ngs. Munt i ns shal l i nt er l ock at i nt er sect i ons and shal l be f i t t ed and wel ded t o st at i onar y mol di ngs.

2. 6 I NSULATI ON CORES

I nsul at ed cor es shal l be of t ype speci f i ed, and pr ovi de an appar ent U- f act or of . 48 i n accor dance wi t h SDI / DOOR 113 and shal l conf or m t o:

a. Ri gi d Cel l ul ar Pol y i socyanur at e Foam: ASTM C591, Type I or I I , f oamed- i n- pl ace or i n boar d f or m, wi t h oxygen i ndex of not l ess t han 22 per cent when t est ed i n accor dance wi t h ASTM D2863; or

b. Ri gi d Pol yst yr ene Foam Boar d: ASTM C578, Type I or I I ; or

c. Mi ner al boar d: ASTM C612, Type I .

2. 7 STANDARD STEEL FRAMES

SDI / DOOR A250. 8, Level 2 or 4, except as ot her wi se speci f i ed. For m f r ames t o s i zes and shapes i ndi cat ed, wi t h wel ded cor ner s. Pr ovi de st eel f r ames f or door s, s i del i ght s, cased openi ngs, and i nt er i or bor r owed l i ght s, unl ess ot her wi se i ndi cat ed.

Apr i l 2019 Page 5 SECTI ON 08 11 13

2. 7. 1 Wel ded Fr ames

Cont i nuousl y wel d f r ame f aces at cor ner j oi nt s. Mechani cal l y i nt er l ock or cont i nuousl y wel d st ops and r abbet s. Gr i nd wel ds smoot h.

Wel d f r ames i n accor dance wi t h t he r ecommended pr act i ce of t he St r uct ur al Wel di ng Code Sect i ons 1 t hr ough 6, AWS D1. 1/ D1. 1M and i n accor dance wi t h t he pr act i ce speci f i ed by t he pr oducer of t he met al bei ng wel ded.

2. 7. 2 St ops and Beads

For m st ops and beads f r om 20 gage st eel . Pr ovi de f or gl azed and ot her openi ngs i n st andar d st eel f r ames. Secur e beads t o f r ames wi t h oval - head, count er sunk Phi l l i ps sel f - t appi ng sheet met al scr ews or conceal ed cl i ps and f ast ener s. Space f ast ener s appr oxi mat el y 12 t o 16 i nch on cent er .

Mi t er mol ded shapes at cor ner s. But t or mi t er squar e or r ect angul ar beads at cor ner s.

2. 7. 3 Cased Openi ngs

Fabr i cat e f r ames f or cased openi ngs of same mat er i al , gage, and assembl y as speci f i ed f or met al door f r ames, except omi t door st ops and pr epar at i on f or har dwar e.

2. 7. 4 Anchors

Pr ovi de anchor s t o secur e t he f r ame t o adj oi ni ng const r uct i on. Pr ovi de st eel anchor s, z i nc- coat ed or pai nt ed wi t h r ust - i nhi bi t i ve pai nt , not l i ght er t han 18 gage.

2. 7. 4. 1 Wal l Anchor s

Pr ovi de at l east t hr ee anchor s f or each j amb. For f r ames whi ch ar e mor e t han 7. 5 f eet i n hei ght , pr ovi de one addi t i onal anchor f or each j amb f or each addi t i onal 2. 5 f eet or f r act i on t her eof .

a. Masonr y: Pr ovi de anchor s of cor r ugat ed or per f or at ed st eel st r aps or 3/ 16 i nch di amet er st eel wi r e, adj ust abl e or T- shaped;

b. St ud par t i t i ons: Wel d or ot her wi se secur el y f ast en anchor s t o backs of f r ames. Desi gn anchor s t o be f ast ened t o c l osed st eel st uds wi t h sheet met al scr ews, and t o open st eel st uds by wi r i ng or wel di ng;

c. Compl et ed openi ngs: Secur e f r ames t o pr evi ousl y pl aced concr et e or masonr y wi t h expansi on bol t s i n accor dance wi t h SDI / DOOR 111;

and

d. Sol i d pl ast er par t i t i ons: Secur e anchor s sol i dl y t o back of f r ames and t i e i nt o t he l at h. Pr ovi de adj ust abl e t op st r ut anchor s on each si de of f r ame f or f ast eni ng t o st r uct ur al member s or cei l i ng const r uct i on above. Si ze and t ype of st r ut anchor s shal l be as r ecommended by t he f r ame manuf act ur er .

2. 7. 4. 2 Fl oor Anchor s

Pr ovi de f l oor anchor s dr i l l ed f or 3/ 8 i nch anchor bol t s at bot t om of each j amb member . Wher e f l oor f i l l occur s, t er mi nat e bot t om of f r ames at t he i ndi cat ed f i ni shed f l oor l evel s and suppor t by adj ust abl e ext ensi on cl i ps

Apr i l 2019 Page 6 SECTI ON 08 11 13 r est i ng on and anchor ed t o t he st r uct ur al s l abs.

2. 8 FI RE AND SMOKE DOORS AND FRAMES

NFPA 80 and NFPA 105 and t hi s speci f i cat i on. The r equi r ement s of NFPA 80 and NFPA 105 shal l t ake pr ecedence over det ai l s i ndi cat ed or speci f i ed.

2. 8. 1 Labels

Fi r e door s and f r ames shal l bear t he l abel of Under wr i t er s Labor at or i es ( UL) , Fact or y Mut ual Engi neer i ng and Resear ch ( FM) , or War nock Her sey I nt er nat i onal ( WHI ) at t est i ng t o t he r at i ng r equi r ed. Test i ng shal l be i n accor dance wi t h NFPA 252 or UL 10C. Label s shal l be met al wi t h r ai sed l et t er s, and shal l bear t he name or f i l e number of t he door and f r ame manuf act ur er . Label s shal l be per manent l y af f i xed at t he f act or y t o f r ames and t o t he hi nge edge of t he door . Door l abel s shal l not be painted.

2. 8. 2 Over si zed Door s

For f i r e door s and f r ames whi ch exceed t he si ze f or whi ch t est i ng and l abel i ng ar e avai l abl e, f ur ni sh cer t i f i cat es st at i ng t hat t he door s and f r ames ar e i dent i cal i n desi gn, mat er i al s, and const r uct i on t o a door whi ch has been t est ed and meet s t he r equi r ement s f or t he c l ass i ndi cat ed.

2. 8. 3 Ast r agal on Fi r e and Smoke Door s

On pai r s of l abel ed f i r e door s, conf or m t o NFPA 80 and UL r equi r ement s.

On smoke cont r ol door s, conf or m t o NFPA 105.

2. 9 WEATHERSTRIPPING

As speci f i ed i n Sect i on 08 71 00 DOOR HARDWARE.

2. 10 HARDWARE PREPARATI ON

Pr ovi de mi ni mum har dwar e r ei nf or ci ng gages as speci f i ed i n SDI / DOOR A250. 6.

Dr i l l and t ap door s and f r ames t o r ecei ve f i ni sh har dwar e. Pr epar e door s and f r ames f or har dwar e i n accor dance wi t h t he appl i cabl e r equi r ement s of SDI / DOOR A250. 8 and SDI / DOOR A250. 6. For addi t i onal r equi r ement s r ef er t o ANSI / BHMA A156. 115. Dr i l l and t ap f or sur f ace- appl i ed har dwar e at t he pr oj ect s i t e. Bui l d addi t i onal r ei nf or ci ng f or sur f ace- appl i ed har dwar e i nt o t he door at t he f act or y. Locat e har dwar e i n accor dance wi t h t he r equi r ement s of SDI / DOOR A250. 8, as appl i cabl e. Punch door f r ames , wi t h t he except i on of f r ames t hat wi l l have weat her st r i ppi ng or gasket i ng, t o r ecei ve t hr ee r ubber door s i l encer s on l ock s i de of s i ngl e door s and one si l encer f or each l eaf at heads of doubl e door s. Set l ock st r i kes out t o pr ovi de cl ear ance f or s i l encer s.

2. 11 FINISHES

2. 11. 1 Fact or y- Pr i med Fi ni sh

Al l sur f aces of door s and f r ames shal l be t hor oughl y c l eaned, chemi cal l y t r eat ed and f act or y pr i med wi t h a r ust i nhi bi t i ng coat i ng as speci f i ed i n

SDI / DOOR A250. 8.

Apr i l 2019 Page 7 SECTI ON 08 11 13

2. 11. 2 Hot - Di p Zi nc- Coat ed and Fact or y- Pr i med Fi ni sh

Fabr i cat e ext er i or door s and f r ames f r om hot di pped zi nc coat ed st eel , al l oyed t ype, t hat compl i es wi t h ASTM A924/ A924Mand ASTM A653/ A653M. The coat i ng wei ght shal l meet or exceed t he mi ni mum r equi r ement s f or coat i ngs havi ng 0. 4 ounces per squar e f oot , t ot al bot h s i des, i . e. , A40. Repai r damaged zi nc- coat ed sur f aces by t he appl i cat i on of z i nc dust pai nt .

Thor oughl y c l ean and chemi cal l y t r eat t o i nsur e maxi mum pai nt adhesi on.

Fact or y pr i me as speci f i ed i n SDI / DOOR A250. 8.

2. 11. 3 El ect r ol yt i c Zi nc- Coat ed Anchor s and Accessor i es

Pr ovi de el ect r ol yt i cal l y deposi t ed z i nc- coat ed st eel i n accor dance wi t h ASTM A879/ A879M, Commer ci al Qual i t y, Coat i ng Cl ass A. Phosphat e t r eat and f act or y pr i me zi nc- coat ed sur f aces as speci f i ed i n SDI / DOOR A250. 8.

2. 12 FABRI CATI ON AND WORKMANSHI P

Fi ni shed door s and f r ames shal l be st r ong and r i gi d, neat i n appear ance, and f r ee f r om def ect s, waves, scr at ches, cut s, dent s, r i dges, hol es, war p, and buckl e. Mol ded member s shal l be c l ean cut , st r ai ght , and t r ue, wi t h j oi nt s coped or mi t er ed, wel l f or med, and i n t r ue al i gnment . Dr ess exposed wel ded and sol der ed j oi nt s smoot h. Desi gn door f r ame sect i ons f or use wi t h t he wal l const r uct i on i ndi cat ed. Cor ner j oi nt s shal l be wel l f or med and i n t r ue al i gnment . Conceal f ast eni ngs wher e pr act i cabl e.

2. 12. 1 Gr out ed Fr ames

For f r ames t o be i nst al l ed i n ext er i or wal l s and t o be f i l l ed wi t h mor t ar or gr out , f i l l t he st ops wi t h st r i ps of r i gi d i nsul at i on t o keep t he gr out out of t he st ops and t o f aci l i t at e i nst al l at i on of st op- appl i ed head and j amb seal s.

2. 13 PROVI SI ONS FOR GLAZI NG

Mat er i al s ar e speci f i ed i n Sect i on 08 81 00, GLAZI NG.

PART 3 EXECUTI ON

3. 1 INSTALLATION

3. 1. 1 Frames

Set f r ames i n accor dance wi t h SDI / DOOR A250. 11. Pl umb, al i gn, and br ace secur el y unt i l per manent anchor s ar e set . Anchor bot t oms of f r ames wi t h expansi on bol t s or powder - act uat ed f ast ener s. Bui l d i n or secur e wal l anchor s t o adj oi ni ng const r uct i on. Backf i l l f r ames wi t h mor t ar . Coat i nsi de of f r ames wi t h cor r osi on- i nhi bi t i ng bi t umi nous mat er i al . For f r ames i n ext er i or wal l s, ensur e t hat st ops ar e f i l l ed wi t h r i gi d i nsul at i on bef or e gr out i s pl aced.

3. 1. 2 Doors

Hang door s i n accor dance wi t h c l ear ances speci f i ed i n SDI / DOOR A250. 8.

Af t er er ect i on and gl azi ng, c l ean and adj ust har dwar e.

3. 1. 3 Fi r e and Smoke Door s and Fr ames

I nst al l f i r e door s and f r ames, i ncl udi ng har dwar e, i n accor dance wi t h

Apr i l 2019 Page 8 SECTI ON 08 11 13

NFPA 80. I nst al l f i r e r at ed smoke door s and f r ames i n accor dance wi t h NFPA 80 and NFPA 105.

3. 2 PROTECTION

Pr ot ect door s and f r ames f r om damage. Repai r damaged door s and f r ames pr i or t o compl et i on and accept ance of t he pr oj ect or r epl ace wi t h new, as di r ect ed. Wi r e br ush r ust ed f r ames unt i l r ust i s r emoved. Cl ean t hor oughl y. Appl y an al l - over coat of r ust - i nhi bi t i ve pai nt of t he same t ype used f or shop coat .

3. 3 CLEANING

Upon compl et i on, c l ean exposed sur f aces of door s and f r ames t hor oughl y.

Remove mast i c smear s and ot her unsi ght l y mar ks.

- - End of Sect i on - -

Apr i l 2019 Page 9 SECTI ON 08 11 13