N0016426RGW20-procurement of design and production of flat railcars-PSC 2220- NAICS 336510
Open Solicitation Posted
Not the latest version. See the latest pre-solicitation from .
- Solicitation number
- N0016426RGW20
- Agency
-
Naval Sea Systems Command
Department of the Navy, Department of Defense
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 336510 Railroad Rolling Stock Manufacturing
- PSC
- 2220 Rail Cars
- Place of performance
- United States
Notice details come from SAM.gov. Updated .
About this opportunity
The Department of the Navy's Naval Sea Systems Command seeks design, fabrication, testing, and delivery of Second-Generation D5 AIM Flatcars through NSWC Crane Warfare Center, with proposals due November 25, 2026, at 2:00 p.m. EST under Amendment 0007. The procurement is unrestricted, with no set-aside used. It is a firm-fixed-price IDIQ except CLIN 0006, which is cost-no-fee shipping.
Amendment 0007 changes the scope by updating the Statement of Work, reducing Contract Data Requirement Lists from 22 to 19, and implementing surveillance criticality designator level A requirements. The contract has a minimum of one unit and a minimum value of $20,000, with a maximum of six flatcars and a maximum amount determined at award. Performance spans five years in yearly intervals, with five one-year ordering periods. Delivery timelines run from order: CLIN 0001 drawings in 390 days, CLIN 0002 first article units and testing in 286 days, and CLIN 0003 production units in 492 days. Orders for subsequent CLINs depend on successful delivery and acceptance of preceding CLINs.
Work is performed in the United States, with CLIN 0006 shipping to Strategic Weapons Facility Atlantic (Kings Bay, GA), Strategic Weapons Facility Pacific (Bangor, WA), or Eastern Range (Cape Canaveral, FL). The contract is administered by Naval Sea Systems Command at Crane, Indiana.
Flatcars must comply with AAR-M1001 Section C and MIL-SPC-810 standards, carry a 286,000-pound gross rail load, include hydraulic cushioning at car ends, and weigh no more than 99,200 pounds empty. The design follows SRD-500778 and interface drawing 5681514. The contract carries a DPAS rating. The government will furnish property, including support equipment valued above $53.6 million scheduled for delivery September 20, 2027, and government-furnished information within 30 days of award. Anticipated award is no later than March 5, 2027. Procuring Contracting Officer Leslie Graber-Heshelman and Technical Point of Contact Patrick Bowling are named.
Notice text
8 versions
Update #8 · Latest ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Amendment 0003: The purpose of this amendment is to
1. Provide answers to questions #28 through #32.
Amendment 0004: The purpose of this amendment is to
1. Extend the proposal due date until 27 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions #33 through #35.
3. Add FAR Clause 52.219-4 that was inadvertently omitted.
In addition, access to Amendments 0002 and 0003 have been changed from "Public" to "Secure."
Amendment 0005: The purpose of this amendment is to
- Revise requirement documents.
- Provide updated answers to previously posed questions.
- Extend the closing date for proposal receipt from 28 March 2026 to 18 May 2026.
- Add a Summary of Changes to Requirement.
Amendment 0006: The purpose of this amendment is to
- Provide answers to questions #36 through #37.
Amendment 0007: The purpose of this amendment is to
- This amendment is to change the scope of work by updating the Statement of Work and reducing the number of Contract Data Requirement Lists (CDRLs). Closing date extended to November 25, 2026, at 2:00pm (EST).
Update #7 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Amendment 0003: The purpose of this amendment is to
1. Provide answers to questions #28 through #32.
Amendment 0004: The purpose of this amendment is to
1. Extend the proposal due date until 27 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions #33 through #35.
3. Add FAR Clause 52.219-4 that was inadvertently omitted.
In addition, access to Amendments 0002 and 0003 have been changed from "Public" to "Secure."
Amendment 0005: The purpose of this amendment is to
- Revise requirement documents.
- Provide updated answers to previously posed questions.
- Extend the closing date for proposal receipt from 28 March 2026 to 18 May 2026.
- Add a Summary of Changes to Requirement.
Amendment 0006: The purpose of this amendment is to
- Provide answers to questions #36 through #37.
Update #6 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Amendment 0003: The purpose of this amendment is to
1. Provide answers to questions #28 through #32.
Amendment 0004: The purpose of this amendment is to
1. Extend the proposal due date until 27 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions #33 through #35.
3. Add FAR Clause 52.219-4 that was inadvertently omitted.
In addition, access to Amendments 0002 and 0003 have been changed from "Public" to "Secure."
Amendment 0005: The purpose of this amendment is to
- Revise requirement documents.
- Provide updated answers to previously posed questions.
- Extend the closing date for proposal receipt from 28 March 2026 to 18 May 2026.
- Add a Summary of Changes to Requirement.
Update #5 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Amendment 0003: The purpose of this amendment is to
1. Provide answers to questions #28 through #32.
Amendment 0004: The purpose of this amendment is to
1. Extend the proposal due date until 27 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions #33 through #35.
3. Add FAR Clause 52.219-4 that was inadvertently omitted.
In addition, access to Amendments 0002 and 0003 have been changed from "Public" to "Secure."
Update #4 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Amendment 0003: The purpose of this amendment is to
1. Provide answers to questions #28 through #32..
Update #3 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Amendment 0002: The purpose of this amendment is to
1. Extend the proposal due date until 13 March 2026 at 2pm (Eastern Standard Time).
2. Provide Answers to submitted questions in Section B.
3. Replace the original GFI Attachment with an updated attachment that now includes Drawing #WS20972A in Section J.
4. Add Drawing WS20972A to attacments in Section J.
5. Add Government Furnished Property list to Section J.
Update #2 ·
Amendment 0001: The purpose of this amendment is to extend the closing date and time from 2:00 PM on 20 February 2026 to 2:00 PM on 6 March 2026.
Update #1 ·
Solicitation
Files
| File | Type | Posted |
|---|---|---|
| Attachment 09_Summary of Changes of Requirements for Flat Railcar.docx | DOCX document | |
| N0016426RGW20_007 SF 30.pdf | ||
| N0016426RGW20_conf thru_0007.pdf | ||
| N0016426RGW20_005_SF30.pdf | ||
| N0016426RGW20_003.pdf | ||
| Solicitation Amendment N0016426RGW200002.pdf | ||
| GFP.pdf |
Notice history
| Notice | Type | Posted |
|---|---|---|
| N0016426RGW20-procurement of design and production of flat railcars-PSC 2220- NAICS 336510 | Pre-Solicitation | |
| This notice | Solicitation | |
| N0016426RGW20-procurement of design and production of flat railcars-PSC 2220- NAICS 336510 | Pre-Solicitation |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity