Grease Trap Cleaning Services
Closed Solicitation Posted
- Solicitation number
- FA485520Q0011
- Agency
- Air Force Special Operations Command Air Force, Department of Defense
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 562998 All Other Miscellaneous Waste Management Services
- PSC
- S299 Housekeeping- Other
- Place of performance
- Cannon Afb Nm 88103 USA
Notice details come from SAM.gov. Updated .
Notice text
2 versions
Update #2 · Latest ·
Revised Solicitation 1 July 2020:
Amendment 0001. The purpose of this amendment is to revise Attachment 1: Instructions to Offerors - Basis for Award, dated 1 July 2020, in order to notify all vendors of the requirement of inclusion of New Mexico Gross Receipts Tax (NMGRT). The NMGRT language can be found in Attachment 1: Instructions to Offerors - Basis for Award, dated 1 July 2020, page 4. All changes have been highlighted.
In addition, an updated Questions and Answers document, dated 1 July 2020, has been posted with this amendment.
The required date and time for receipt of proposals has not change.
This is a combined Synopsis / Solicitation Simplified Acquisition Proposal Request (SAPR), Solicitation number FA485520Q0011.
Refer to the following attached COMBO and attached documents for details associated with this requirement, response instructions and basis for award.
Attachments:
FA485520Q0011 COMBO Synopsis Solicitation
Combo Attach 1. Instructions to Offerors (ITO) / Basis for Award - 4 June 2020
Combo Attach 2. Pricing Worksheet – 4 June 2020
Combo Attach 3. Performance Work Statement (PWS) – 20 May 2020
Combo Attach 4. PWS Attachment A: Workload Data – 20 May 2020
Combo Attach 5. PWS Attachment B: Data Requirements – 20 May 2020
Combo Attach 6. Provisions and Clauses – 4 June 2020
Combo Attach 7. Wage Determination 2015‐5458: Rev 13 – 23 December 2019
The Contractor shall provide all management, supervision, labor, tools, materials, equipment and transportation necessary to perform grease trap cleaning services at Cannon Air Force Base New Mexico. Service includes:
Pumping and Cleaning. The Contractor shall remove all liquid, semi-solid waste materials from each grease trap and shall use scraping or high-pressure water to remove any accumulations on interior walls and floors. The Contractor shall clean the grease trap service area around the grease trap. The Contractor shall use a biodegradable detergent to scrub the surface areas. Grease traps shall be cleaned whenever they are pumped.
Skimming - The Contractor shall skim off the grease layer from the water surface in the grease trap, clean up and remove any spillage, or residue.
Disposal - The Contractor shall transport and dispose of all excavated, or otherwise removed liquid, semi-solid, or solid waste materials to an approved off-base disposal site, in accordance with all applicable Federal Environmental Protection Agency (EPA), State and local liquid and solid waste pollution abatement Statutes, Executive Orders, codes, criteria and requirements.
Update #1 ·
This is a combined Synopsis / Solicitation Simplified Acquisition Proposal Request (SAPR), Solicitation number FA485520Q0011.
Refer to the following attached COMBO and attached documents for details associated with this requirement, response instructions and basis for award.
Attachments:
FA485520Q0011 COMBO Synopsis Solicitation
Combo Attach 1. Instructions to Offerors (ITO) / Basis for Award - 4 June 2020
Combo Attach 2. Pricing Worksheet – 4 June 2020
Combo Attach 3. Performance Work Statement (PWS) – 20 May 2020
Combo Attach 4. PWS Attachment A: Workload Data – 20 May 2020
Combo Attach 5. PWS Attachment B: Data Requirements – 20 May 2020
Combo Attach 6. Provisions and Clauses – 4 June 2020
Combo Attach 7. Wage Determination 2015‐5458: Rev 13 – 23 December 2019
The Contractor shall provide all management, supervision, labor, tools, materials, equipment and transportation necessary to perform grease trap cleaning services at Cannon Air Force Base New Mexico. Service includes:
Pumping and Cleaning. The Contractor shall remove all liquid, semi-solid waste materials from each grease trap and shall use scraping or high-pressure water to remove any accumulations on interior walls and floors. The Contractor shall clean the grease trap service area around the grease trap. The Contractor shall use a biodegradable detergent to scrub the surface areas. Grease traps shall be cleaned whenever they are pumped.
Skimming - The Contractor shall skim off the grease layer from the water surface in the grease trap, clean up and remove any spillage, or residue.
Disposal - The Contractor shall transport and dispose of all excavated, or otherwise removed liquid, semi-solid, or solid waste materials to an approved off-base disposal site, in accordance with all applicable Federal Environmental Protection Agency (EPA), State and local liquid and solid waste pollution abatement Statutes, Executive Orders, codes, criteria and requirements.
Attachments
On GovTribe
Work this opportunity on GovTribe
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity