FAA National Test Equipment Program (NTEP) Test, Measurement, and Diagnostic Equipment (TMDE) Callibration
Closed Solicitation Posted
- Solicitation number
- 6973GH-20-R-00042
- Agency
-
Non-Franchise Acquisition Services
Federal Aviation Administration, Department of Transportation
- Responses due
- Set-aside
- No set-aside
Opportunity facts
- NAICS code
- 811219 Other Electronic and Precision Equipment Repair and Maintenance
- PSC
- 6640 Laboratory Equipment And Supplies
Notice details come from SAM.gov. Updated .
About this opportunity
This solicitation seeks calibration services for Test, Measurement, and Diagnostic Equipment located throughout the continental United States and outside the continental United States. The Federal Aviation Administration requires the contractor to provide predominantly mobile calibration facilities as well as some fixed calibration facilities. The contractor must calibrate the equipment within specified intervals to support the maintenance of the National Airspace System, facilities, and services. The evaluation criteria will consider the offeror's technical approach and past performance. Responses are due by April 13, 2020.
There is no set-aside designation. The primary NAICS code is 541715 and PSC code is Q202. The incumbent contractor is The Bionetics Corporation. The minimum contract value is $5,000 and maximum is $250,000 per year. The contractor must be able to calibrate over 1,000 pieces of equipment located at 75 sites within the continental United States and 25 sites outside the continental United States. The period of performance is one base year with four optional one-year extensions.
Notice text
4 versions
Update #4 · Latest ·
AMENDMENT 0003 CLARIFIES RESUME(S) REQUIRED AT PROPOSAL IN SECTION L.6 OF THE SOLICITATION.
AMENDMENT 0002 EXTEND SOLICITATION CLOSE DATE TO 4/13/2020.
AMENDMENT 0001 ADDED 3/12/2020 TO ADDRESS Q&A FROM THE ORIGINAL SOLICITATION.
The National Test Equipment Support will ensure the calibration of Test, Measurement, and Diagnostic Equipment (TMDE). This requirement includes calibration facilities that are predominantly mobile, with fixed facilities for equipment unable to calibrate on a van. The FAA’s inventory of TMDE is located at FAA facilities throughout the Continental United States (CONUS) and outside the CONUS (OCONUS).
The objective of the National Test Equipment Support Contract is to obtain a broad range of services required by the FAA to support the life cycle management of the TMDE required to maintain NAS systems, facilities, and services. The contract will allow the National Test Equipment Program Manager (NTEPM) and other stakeholders to ensure TMDE is calibrated within the specified interval referenced on the Calibration Cycle Requirements Table (CCRT).
Update #3 ·
AMENDMENT 0002 EXTEND SOLICITATION CLOSE DATE TO 4/13/2020.
AMENDMENT 0001 ADDED 3/12/2020 TO ADDRESS Q&A FROM THE ORIGINAL SOLICITATION.
The National Test Equipment Support will ensure the calibration of Test, Measurement, and Diagnostic Equipment (TMDE). This requirement includes calibration facilities that are predominantly mobile, with fixed facilities for equipment unable to calibrate on a van. The FAA’s inventory of TMDE is located at FAA facilities throughout the Continental United States (CONUS) and outside the CONUS (OCONUS).
The objective of the National Test Equipment Support Contract is to obtain a broad range of services required by the FAA to support the life cycle management of the TMDE required to maintain NAS systems, facilities, and services. The contract will allow the National Test Equipment Program Manager (NTEPM) and other stakeholders to ensure TMDE is calibrated within the specified interval referenced on the Calibration Cycle Requirements Table (CCRT).
Update #2 ·
AMENDMENT 0001 ADDED 3/12/2020 TO ADDRESS Q&A FROM THE ORIGINAL SOLICITATION.
The National Test Equipment Support will ensure the calibration of Test, Measurement, and Diagnostic Equipment (TMDE). This requirement includes calibration facilities that are predominantly mobile, with fixed facilities for equipment unable to calibrate on a van. The FAA’s inventory of TMDE is located at FAA facilities throughout the Continental United States (CONUS) and outside the CONUS (OCONUS).
The objective of the National Test Equipment Support Contract is to obtain a broad range of services required by the FAA to support the life cycle management of the TMDE required to maintain NAS systems, facilities, and services. The contract will allow the National Test Equipment Program Manager (NTEPM) and other stakeholders to ensure TMDE is calibrated within the specified interval referenced on the Calibration Cycle Requirements Table (CCRT).
Update #1 ·
The National Test Equipment Support will ensure the calibration of Test, Measurement, and Diagnostic Equipment (TMDE). This requirement includes calibration facilities that are predominantly mobile, with fixed facilities for equipment unable to calibrate on a van. The FAA’s inventory of TMDE is located at FAA facilities throughout the Continental United States (CONUS) and outside the CONUS (OCONUS).
The objective of the National Test Equipment Support Contract is to obtain a broad range of services required by the FAA to support the life cycle management of the TMDE required to maintain NAS systems, facilities, and services. The contract will allow the National Test Equipment Program Manager (NTEPM) and other stakeholders to ensure TMDE is calibrated within the specified interval referenced on the Calibration Cycle Requirements Table (CCRT).
Files
Show all 31
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| Troubleshooting, Calibration and as-needed Remedial Repair of Proof Test Machines | Naval Sea Systems Command | Total Small Business | |
| Evaluation, Calibration, and Possible Repair of Night Vision Device (NVD) Test Sets | Coast Guard | No set-aside | |
| Quanta 650 Electron Microscope - Inspection, PM, Calibration , and Unscheduled Corrective Repairs. | Naval Sea Systems Command | No set-aside | |
| Keysight Network Analyzer | Defense Microelectronics Activity | No set-aside | |
| Comprehensive full-service maintenance/repair plan for Illumina Nova/Seq 6000 | Naval Supply Systems Command | No set-aside |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity