Dockside (DS): USCGC MIDGETT FY27 Repair
Closed Solicitation Posted
- Solicitation number
- 70Z08526QLREP0024
- Agency
-
Coast Guard
Department of Homeland Security
- Responses due
- Set-aside
- Total Small Business
Opportunity facts
- NAICS code
- 336611 Ship Building and Repairing
- PSC
- J999 Non-Nuclear Ship Repair (West)
- Place of performance
- Honolulu, Hawaii, United States
Notice details come from SAM.gov. Updated .
About this opportunity
The U.S. Coast Guard seeks dockside repair services for Coast Guard Cutter MIDGETT at its homeport in Honolulu, Hawaii, with quotes due October 5, 2026, at 1400 Pacific Time. This procurement is 100% set aside for small business concerns (size standard 1,300 employees).
Place of performance is Honolulu, Hawaii (400 Sand Island Parkway). The period of performance runs February 2 through May 8, 2027. Work encompasses 25 definite line items and two option items covering tank cleaning and inspection (ballast, aviation fuel service and storage, potable water, marine diesel fuel service and storage), refrigeration plant grooming, side boat davit renewal using an Allied Systems Dual Point Davit valued at $480,000, oily water separator inspection and grooming, deck covering ceramic tile renewal, piping and ducting insulation renewal, dewatering discharge connection installation, flight deck floodlight relocation, hydraulic system quick disconnect installation, fire detection system inspection and testing, and flexible hose renewals. Critical inspection items must be completed within the first 25 percent of the contract period.
NAICS code is 336611, Ship Building and Repairing. PSC code is J999, Non-Nuclear Ship Repair (West). Pricing is submitted using Attachment 1 Price Schedule with firm-fixed-price composite labor rates, lay day rates, and material/subcontractor markup percentages. Option items O-00A and O-00B cover estimated labor growth (3,202 hours at vendor-proposed composite rate) and material/subcontractor cost growth (markup applied to $100,000 base). Quotes remain valid 120 days from solicitation close.
Offerors must submit a cover letter with UEI number, technical capability plan in Gantt chart format demonstrating schedule feasibility and identifying critical paths and float, and a written narrative (maximum 10 pages) addressing performance risks, environmental mitigation strategies, and staffing/resource management. Contractors and subcontractors require RAPIDGate credentialing for base access unless exempted. Insurance requirements include workers' compensation ($1 million), general liability ($1 million per occurrence), and automobile liability ($1 million per occurrence). The Government reserves the right to award without discussions. Six amendments have been issued (A0001 through A0006) addressing specification corrections, deadline extensions, technical clarifications on work items D-016, D-009, D-008, D-018, and D-021, MPAC compartment identification, and contractor pier power availability (480 VAC, 400A Viking plug-in on the same pier, adjacent to contractor laydown area).
Notice text
6 versions
Update #6 · Latest ·
Amendment 0006: Amendment provides clarification regarding contractor pier power. One 480 VAC, 400A Viking electrical plug-in will be available on the same pier as the vessel, adjacent to the contractor equipment laydown area.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0005: This amendment provides responses to offeror questions concerning Work Items D-008 and D-021. The amendment corrects the drawing reference in D-008, Paragraph 3.2.3, to CG Drawing 418A-WMSL-801-1 and clarifies the Government-furnished equipment applicable to D-021. All other terms and conditions of the solicitation remain unchanged.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0004: provides the Government’s responses to additional offeror questions regarding drawings and technical requirements associated with Work Items D-016, D-009, and D-008. The amendment also extends the solicitation closing date and time to October 5, 2026, at 1400 Pacific Time (PT); all other terms and conditions remain unchanged.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0003: provides the Government’s response to an offeror question regarding the correct compartment identification for the MPAC work under Work Item D-018. The amendment clarifies that MPAC #1 is located in the FMMR Upper Level and that paragraph 1.1 identifies the correct work locations.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0002: Adds a clarifying note regarding the Attachment 2 Specification posted in Amendment 0001 & extends the no later than due date for receipt of quotes from 22 September 2026 to 29 September 2026 at 10:00 am Pacific Time.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Update #5 ·
Amendment 0005: This amendment provides responses to offeror questions concerning Work Items D-008 and D-021. The amendment corrects the drawing reference in D-008, Paragraph 3.2.3, to CG Drawing 418A-WMSL-801-1 and clarifies the Government-furnished equipment applicable to D-021. All other terms and conditions of the solicitation remain unchanged.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0004: provides the Government’s responses to additional offeror questions regarding drawings and technical requirements associated with Work Items D-016, D-009, and D-008. The amendment also extends the solicitation closing date and time to October 5, 2026, at 1400 Pacific Time (PT); all other terms and conditions remain unchanged.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0003: provides the Government’s response to an offeror question regarding the correct compartment identification for the MPAC work under Work Item D-018. The amendment clarifies that MPAC #1 is located in the FMMR Upper Level and that paragraph 1.1 identifies the correct work locations.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0002: Adds a clarifying note regarding the Attachment 2 Specification posted in Amendment 0001 & extends the no later than due date for receipt of quotes from 22 September 2026 to 29 September 2026 at 10:00 am Pacific Time.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Update #4 ·
Amendment 0004: provides the Government’s responses to additional offeror questions regarding drawings and technical requirements associated with Work Items D-016, D-009, and D-008. The amendment also extends the solicitation closing date and time to October 5, 2026, at 1400 Pacific Time (PT); all other terms and conditions remain unchanged.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0003: provides the Government’s response to an offeror question regarding the correct compartment identification for the MPAC work under Work Item D-018. The amendment clarifies that MPAC #1 is located in the FMMR Upper Level and that paragraph 1.1 identifies the correct work locations.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0002: Adds a clarifying note regarding the Attachment 2 Specification posted in Amendment 0001 & extends the no later than due date for receipt of quotes from 22 September 2026 to 29 September 2026 at 10:00 am Pacific Time.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Update #3 ·
Amendment 0002: Adds a clarifying note regarding the Attachment 2 Specification posted in Amendment 0001 & extends the no later than due date for receipt of quotes from 22 September 2026 to 29 September 2026 at 10:00 am Pacific Time.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Update #2 ·
Amendment 0001: Replaces the Attachment 1 Price Schedule as well as the Attachment 2 Specification. The Attachment 2 Specification originally posted was for a previous/different project regarding the cutter. The Attachment 2 Specification which is part of Amendment 0001 is an entirely different specification and therefore specifies no revisions on the Revisions page iii.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Update #1 ·
Coast Guard Cutter MIDGETT fiscal quater 2, fiscal year 2027 dockside repair. The period of performance is 2 February - 8 May 2027.
Files
Show all 19
Notice history
| Notice | Type | Posted |
|---|---|---|
| This notice | Solicitation | |
| Dockside (DS): USCGC MIDGETT FY27 Repair | Pre-Solicitation |
Similar open opportunities
| Opportunity | Agency | Set-aside | Responses due |
|---|---|---|---|
| USCGC alder DD FY27 | — | Total Small Business | |
| Drydock Repairs USCGC HATCHET (WLIC-75309) | — | Total Small Business | |
| Dry-Dock: USCG ANT PUGET SOUND (55107) FY27 DD | Coast Guard | Total Small Business | |
| Drydock repairs for the CGC anvil | — | Total Small Business | |
| CGC barbara mabrity | — | Total Small Business |
On GovTribe
Work this opportunity
- Track it in your pipeline
- Find teaming partners
- Similar opportunities
- Ask GovTribe AI about this opportunity