MIDGETT_Solicitation_Amendment_A0004.docx

The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offers is extended. is not extended. Offers must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended, by one of the following methods:AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

2. AMENDMENT/MODIFICATION NUMBER

A0004

5. PROJECT NUMBER (If applicable)

6. ISSUED BY CODE 7. ADMINISTERED BY (If other than Item 6) CODE Commander, USCG-SFLC-CPD 2 Attn: Wayne Gutman 1301 Clay Street, Suite 800N Oakland, CA 94612 E-mail: wayne.m.gutman@uscg.mil

8. NAME AND ADDRESS OF CONTRACTOR (Number, street, county, State and ZIP Code) 9A. AMENDMENT OF SOLICITATION NUMBER

70Z08526QLREP0024

9B. DATED (SEE ITEM 11)

10A. MODIFICATION OF CONTRACT/ORDER NUMBER

10B. DATED (SEE ITEM 13)

CODE

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

FACILITY CODE

(X)

4. REQUISITION/PURCHASE REQUISITION NUMBER

3. EFFECTIVE DATE

09/17/2026

1. CONTRACT ID CODE

(a) By completing items 8 and 15, and returning copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted; or (c) By separate letter or electronic communication which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by letter or electronic communication, provided each letter or electronic communication makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS. IT MODIFIES THE CONTRACT/ORDER NUMBER AS DESCRIBED IN ITEM 14.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation data, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(b).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not is required to sign this document and return 1 copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

MIDGETT DS FQ2 FY27

See next page.

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15B. CONTRACTOR/OFFEROR

(Signature of person authorized to sign)

(Signature of Contracting Officer)

16C. DATE SIGNED

Previous edition unusable

STANDARD FORM 30 (REV. 11/2016)

Prescribed by GSA FAR (48 CFR) 53.243

CONTINUATION OF SF 30 – BLOCK 14

Questions

1. Question Number: 2 Section/Work Item Number: D-016

Question:

The spec calls out drawing 750-WMSL-320-580 which was not provided in this technical package. Since the work item says to accomplish in accordance with "installation notes" in this drawing, how should we price this item?

Answer:

Work Item 16, Flight Deck Floodlight Transformer, Motor Driven-Auto, Relocate, does not list drawing 750-WMSL-320-580

Work item 9, Side Boat Davit, Renew, does list drawing 750-WMSL-320-580 in paragraph 3.6 and 3.6.1.

Interested vendors who requested drawings will be notified individually for access to the drawing.

2. Question Number: 3 Section/Work Item Number: D-008 Paragraph Number: 3.3.7.2

Question: Para 3.3.7.2 instructs the Contractor to accomplish Other components for calibration, including RTDs, thermometers and temperature switches, are shown in CG Dwg 750-WMSL-516-001 in the equipment table and the List of Thermometers. The thermometers and RTDs must be calibrated, and the temperature switches must be function checked and adjusted.

The Contractor is unable to identify the number or type of RTD’s in the Refrigeration Plant using the provided references. Also the Contractor is unable to find the procedure to accomplish this task for the RTD’s.

Please provide additional information and/or References.

Answer:

Sheet 4 of CG Dwg 750-WMSL-516-001 lists the RTD’s including the Component Identification Number, LSN, Functional Name, Specific Class, Material, End Connection size in inches, Fluid Type, Design pressure and pressure, Manufacturers Reference Drawing, and ship location.

Interested vendors who requested drawings will be notified individually for access to the drawing.

3. The solicitation closing date and time is hereby extended to October 5, 2026, at 1400 Pacific Time (PT).

4. All other terms and conditions remain unchanged.

image1.png image2.png image3.png