DDG 1000 and DDG 1001 Execution Yard - RFP Release

15 September 2016 - Amendments 0009 and 0010 have previously been submitted to offerors in the competitive range, and are being provided via FBO for further reference. Amendment 0010 contained an attachment that is not being provided through FBO. This attachment can be obtained by emailing Stacy Crisman at stacy.crisman@navy.mil and Richard Rossi at richard.w.rossi@navy.mil.  Instructions for accessing the documents will be provided upon request. A Common Access Card (CAC) will be required in order to access the document.
______________________________________________________

17 August 2016 - Amendment 0008 was submitted to offerors in the competitive range, and is being provided via FBO for further reference. Additionally, the Government is providing responses to additional bidders questions that were provided by offerors in the competitive range in regards to information provided in letters sent by the Government.
______________________________________________________

The Naval Sea Systems Command (NAVSEA) is issuing solicitation N00024-16-R-2321, pursuant to full and open competitive procedures (see FAR Subpart 6.1) and a best value tradeoff process (see FAR 15.101-1), in order to select a single contractor to accomplish the Execution Yard work for Ship Post Delivery efforts on the DDG 1000 (ZUMWALT) and DDG 1001 (MICHAEL MONSOOR) in the ships' homeport of San Diego, California. This is anticipated to be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with an ordering period from Government fiscal year (GFY) 2017 through 2021.

The purpose of this contract is to provide management, labor, materials, and facilities, as required, to accomplish the DDG 1000 and DDG 1001 Post Delivery efforts from contract award through to the end of GFY 21.  Post Delivery efforts include all availabilities for DDG 1000 and DDG 1001 during this time period to include the following: Post Delivery Availabilities (PDAs), Mission System Activations (MSAs), Post Delivery Test and Trials (PDT&T), Operation Evaluation (OPEVAL), Combat Systems Ship's Qualification Trial (CSSQT), and Chief of Naval Operations (CNO) Availabilities prior to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship. The intensive industrial periods within Post Delivery are the PDAs and PSAs. Other industrial efforts outside of PDAs and PSAs are considered Emergent Work and will be conducted during in port Window of Opportunities (WOOs) throughout PDT&T, OPEVAL, CSSQT, and CNO Availabilities. The PDA industrial efforts are in support of MSA testing, with overlap between the industrial activities for PDA and the commencement of MSA testing.  Post Delivery support may be required during MSA, PDT&T, OPEVAL, CSSQT, and CNO Availabilities. Corrective and Preventative Maintenances will be conducted from each ship's arrival at the Contractor's shipyard to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship.

All proposals shall be submitted in accordance with the RFP no later than 2:00 PM EDT on 27 May 2016.

Questions regarding the RFP can be submitted via Attachment S-1 to Stacy Crisman (stacy.crisman@navy.mil) and Richard Rossi (richard.w.rossi@navy.mil). Although the Navy may continue to accept questions up to the closing date and time set for receipt of proposals, time may not be sufficient to permit responses to questions received after 06 May 2016 to be prepared and issued prior to the receipt of proposals

The following attachments have not been posted to FBO:

J-3 - List of Off-Ship Preventative Maintenance
J-7 - DDG 1000 Composite Deckhouse and Hangar Maintenance and Repair Manual
J-10 - Drawings and Pictures for Temporary Services AWI 00017 863-51-402
J-11 - Post-Delivery Schedule
J-12 - Test Index
J-101 - Work Specifications for J-100
J-201 - Work Specifications for J-200

These attachments can be obtained by emailing Stacy Crisman at stacy.crisman@navy.mil and Richard Rossi at richard.w.rossi@navy.mil.  Instructions for accessing the documents will be provided upon request. A Common Access Card (CAC) will be required in order to access the documents.

17 August 2016 - Amendment 0008 was submitted to offerors in the competitive range, and is being provided via FBO for further reference. Additionally, the Government is providing responses to additional bidders questions that were provided by offerors in the competitive range in regards to information provided in letters sent by the Government.
______________________________________________________

The Naval Sea Systems Command (NAVSEA) is issuing solicitation N00024-16-R-2321, pursuant to full and open competitive procedures (see FAR Subpart 6.1) and a best value tradeoff process (see FAR 15.101-1), in order to select a single contractor to accomplish the Execution Yard work for Ship Post Delivery efforts on the DDG 1000 (ZUMWALT) and DDG 1001 (MICHAEL MONSOOR) in the ships' homeport of San Diego, California. This is anticipated to be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with an ordering period from Government fiscal year (GFY) 2017 through 2021.

The purpose of this contract is to provide management, labor, materials, and facilities, as required, to accomplish the DDG 1000 and DDG 1001 Post Delivery efforts from contract award through to the end of GFY 21.  Post Delivery efforts include all availabilities for DDG 1000 and DDG 1001 during this time period to include the following: Post Delivery Availabilities (PDAs), Mission System Activations (MSAs), Post Delivery Test and Trials (PDT&T), Operation Evaluation (OPEVAL), Combat Systems Ship's Qualification Trial (CSSQT), and Chief of Naval Operations (CNO) Availabilities prior to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship. The intensive industrial periods within Post Delivery are the PDAs and PSAs. Other industrial efforts outside of PDAs and PSAs are considered Emergent Work and will be conducted during in port Window of Opportunities (WOOs) throughout PDT&T, OPEVAL, CSSQT, and CNO Availabilities. The PDA industrial efforts are in support of MSA testing, with overlap between the industrial activities for PDA and the commencement of MSA testing.  Post Delivery support may be required during MSA, PDT&T, OPEVAL, CSSQT, and CNO Availabilities. Corrective and Preventative Maintenances will be conducted from each ship's arrival at the Contractor's shipyard to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship.

All proposals shall be submitted in accordance with the RFP no later than 2:00 PM EDT on 27 May 2016.

Questions regarding the RFP can be submitted via Attachment S-1 to Stacy Crisman (stacy.crisman@navy.mil) and Richard Rossi (richard.w.rossi@navy.mil). Although the Navy may continue to accept questions up to the closing date and time set for receipt of proposals, time may not be sufficient to permit responses to questions received after 06 May 2016 to be prepared and issued prior to the receipt of proposals

The following attachments have not been posted to FBO:

J-3 - List of Off-Ship Preventative Maintenance
J-7 - DDG 1000 Composite Deckhouse and Hangar Maintenance and Repair Manual
J-10 - Drawings and Pictures for Temporary Services AWI 00017 863-51-402
J-11 - Post-Delivery Schedule
J-12 - Test Index
J-101 - Work Specifications for J-100
J-201 - Work Specifications for J-200

These attachments can be obtained by emailing Stacy Crisman at stacy.crisman@navy.mil and Richard Rossi at richard.w.rossi@navy.mil.  Instructions for accessing the documents will be provided upon request. A Common Access Card (CAC) will be required in order to access the documents.

The Naval Sea Systems Command (NAVSEA) is issuing solicitation N00024-16-R-2321, pursuant to full and open competitive procedures (see FAR Subpart 6.1) and a best value tradeoff process (see FAR 15.101-1), in order to select a single contractor to accomplish the Execution Yard work for Ship Post Delivery efforts on the DDG 1000 (ZUMWALT) and DDG 1001 (MICHAEL MONSOOR) in the ships' homeport of San Diego, California. This is anticipated to be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with an ordering period from Government fiscal year (GFY) 2017 through 2021.

The purpose of this contract is to provide management, labor, materials, and facilities, as required, to accomplish the DDG 1000 and DDG 1001 Post Delivery efforts from contract award through to the end of GFY 21.  Post Delivery efforts include all availabilities for DDG 1000 and DDG 1001 during this time period to include the following: Post Delivery Availabilities (PDAs), Mission System Activations (MSAs), Post Delivery Test and Trials (PDT&T), Operation Evaluation (OPEVAL), Combat Systems Ship's Qualification Trial (CSSQT), and Chief of Naval Operations (CNO) Availabilities prior to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship. The intensive industrial periods within Post Delivery are the PDAs and PSAs. Other industrial efforts outside of PDAs and PSAs are considered Emergent Work and will be conducted during in port Window of Opportunities (WOOs) throughout PDT&T, OPEVAL, CSSQT, and CNO Availabilities. The PDA industrial efforts are in support of MSA testing, with overlap between the industrial activities for PDA and the commencement of MSA testing.  Post Delivery support may be required during MSA, PDT&T, OPEVAL, CSSQT, and CNO Availabilities. Corrective and Preventative Maintenances will be conducted from each ship's arrival at the Contractor's shipyard to the end of Shipbuilding and Conversion, Navy (SCN) Obligation Work Limiting Date (OWLD) for each ship.

All proposals shall be submitted in accordance with the RFP no later than 2:00 PM EDT on 27 May 2016.

Questions regarding the RFP can be submitted via Attachment S-1 to Stacy Crisman (stacy.crisman@navy.mil) and Richard Rossi (richard.w.rossi@navy.mil). Although the Navy may continue to accept questions up to the closing date and time set for receipt of proposals, time may not be sufficient to permit responses to questions received after 06 May 2016 to be prepared and issued prior to the receipt of proposals

The following attachments have not been posted to FBO:

J-3 - List of Off-Ship Preventative Maintenance
J-7 - DDG 1000 Composite Deckhouse and Hangar Maintenance and Repair Manual
J-10 - Drawings and Pictures for Temporary Services AWI 00017 863-51-402
J-11 - Post-Delivery Schedule
J-12 - Test Index
J-101 - Work Specifications for J-100
J-201 - Work Specifications for J-200

These attachments can be obtained by emailing Stacy Crisman at stacy.crisman@navy.mil and Richard Rossi at richard.w.rossi@navy.mil.  Instructions for accessing the documents will be provided upon request. A Common Access Card (CAC) will be required in order to access the documents.

The Naval Sea Systems Command (NAVSEA) intends to issue solicitation N00024-16-R-2321, pursuant to full and open competitive procedures (see FAR Subpart 6.1) and a best value tradeoff process (see FAR 15.101-1), to accomplish Execution Yard work for Ship Post Delivery Availabilities (PDAs), Post Shakedown Availabilities (PSAs), and Emergent Work onboard the DDG 1000 (ZUMWALT), DDG 1001 (MICHAEL MONSOOR) and DDG 1002 (LYNDON B. JOHNSON) in the ships' homeport of San Diego, California. The PDA is intended to complete the installation of the Combat Systems equipment, complete fitting out, and to correct design-related deficiencies to support Mission Systems Activation (MSA), Post Delivery Test & Trial (PDT&T), and DDG 1000 Operational Evaluation (OPEVAL). The PSA is intended to correct deficiencies and accomplish system/equipment upgrades identified during ship PDT&T and shakedown periods. This is anticipated to be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with an ordering period from Government fiscal year (FY) 2017 through 2022.

A draft solicitation (exclusive of Sections L and M) is being provided at this time for informational purposes only; this does not constitute a formal solicitation and no proposals will be reviewed or considered. The purpose of this draft solicitation is to allow interested vendors to view the Government's requirements and to submit questions or comments, if desired, regarding said requirements. All inquiries shall be submitted via email to Stacy Crisman (stacy.crisman@navy.mil) and Richard Rossi (richard.w.rossi@navy.mil) no later than 4:00 PM on 02 February 2016.

The following Section J attachment(s) are being provided with the draft solicitation:
J-6 - Work Item Specifications

The complete package of 4E Specifications can be obtained by emailing Stacy Crisman at stacy.crisman@navy.mil, or Richard Rossi at richard.w.rossi@navy.mil.  Instructions for accessing the documents will be provided upon request.

It is also anticipated that the Government will hold an industry day for all interested vendors during early or mid-February in San Diego, CA. A separate announcement will be posted to provide further details on this event.

Disclaimer: This pre-solicitation notice is for information only, and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept, proposals as a result of this synopsis. If a solicitation is issued in the future, it will be announced via the Federal Business Opportunities (FBO) website located at https://www.fbo.gov, and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. This is not an RFP or a promise to issue an RFP and this information is subject to modification and in no way binds the Government to award a contract.

The Naval Sea Systems Command (NAVSEA) intends to issue solicitation N00024-16-R-2321, pursuant to full and open competitive procedures (see FAR Subpart 6.1) and a best value tradeoff process (see FAR 15.101-1), to accomplish Execution Yard work for Ship Post Delivery Availabilities (PDAs), Post Shakedown Availabilities (PSAs), and Emergent Work onboard the DDG 1000 (ZUMWALT), DDG 1001 (MICHAEL MONSOOR) and DDG 1002 (LYNDON B. JOHNSON) in the ships' homeport of San Diego, California. The PDA is intended to complete the installation of the Combat Systems equipment, complete fitting out, and to correct design-related deficiencies to support Mission Systems Activation (MSA), Post Delivery Test & Trial (PDT&T), and DDG 1000 Operational Evaluation (OPEVAL). The PSA is intended to correct deficiencies and accomplish system/equipment upgrades identified during ship PDT&T and shakedown periods. This is anticipated to be an Indefinite Delivery, Indefinite Quantity (IDIQ) contract with an ordering period from Government fiscal year (FY) 2017 through 2022.

A draft solicitation (exclusive of Sections L and M) is being provided at this time for informational purposes only; this does not constitute a formal solicitation and no proposals will be reviewed or considered. The purpose of this draft solicitation is to allow interested vendors to view the Government's requirements and to submit questions or comments, if desired, regarding said requirements. All inquiries shall be submitted via email to Stacy Crisman (stacy.crisman@navy.mil) and Richard Rossi (richard.w.rossi@navy.mil) no later than 4:00 PM on 02 February 2016.

The following Section J attachment(s) are being provided with the draft solicitation:
J-6 - Work Item Specifications

It is also anticipated that the Government will hold an industry day for all interested vendors during early or mid-February in San Diego, CA. A separate announcement will be posted to provide further details on this event.

Disclaimer: This pre-solicitation notice is for information only, and shall not be construed as a commitment by the Government to solicit contractual offers or award contracts. The Government is not soliciting, nor will it accept, proposals as a result of this synopsis. If a solicitation is issued in the future, it will be announced via the Federal Business Opportunities (FBO) website located at https://www.fbo.gov, and interested parties must comply with that announcement. The Government will not reimburse respondents for any questions submitted or information provided as a result of this notice. This is not an RFP or a promise to issue an RFP and this information is subject to modification and in no way binds the Government to award a contract.