A22 - WKS Spillway Stop Log Shop Drawing 7490 Rev E pg-16.pdf
PDF 134 KB Posted
- Attached to
- W. Kerr Scott Crane Rental
- Solicitation number
- W912PM26QA048
About this file
This is an As-Built Details drawing for a Stoplog Assembly Step 4, a composite gate structure designed for water control applications. The document provides comprehensive technical specifications and assembly details for the stoplog component manufactured by Composite Advantage for Axcess Infrastructure on behalf of US Army Corps of Engineers.
The stoplog assembly has an estimated total weight of 10,503 pounds and consists of seven primary components: the Stoplog Assembly Step 3 (part 1), an SBR molded gate seal assembly with Teflon cladding (part 2), 60 feet of vinyl ester pultruded strips (part 3), 112 stainless steel ASTM A193 Grade B8M hex head bolts (part 5), 112 stainless steel flat washers (part 6), and two custom 316 stainless steel bearing bar assemblies (part 7). The assembly measures 120 inches in upstream-downstream depth and 158.5 inches in height with a 1:30 scale representation. Quality control notes document verification of seal hole drilling, tapping, clearing, and chasing, with sign-off requirements for acceptance. The drawing includes dimensional specifications, a bill of materials, revision control information dated 08/15/23, and notes regarding shop-installed 12-inch thick shim plates. Design variations are documented in a control dimension table with measured versus design values and deviations recorded in inches.
View the file
Other files
Show all 21
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
ASSEMBLY REDESIGNED
NOTES UPDATED / ADDED
www.axcessinfrastructure.com
B LB 01/09/24
C
D
LB
LB
10/04/24
05/13/25
CONTROL DIMENSION TABLE
Axcess Infrastructure
DAYTON, OH 45458
(937) 907-0069
CLIENT:
09/18/23
STOPLOG ASSEMBLY STEP 4
PAGE NO.:
NOTES:
CUSTOMER:
US ARMY CORP OF ENGINEERS
DATE: 7490
DESCRIPTION:DATE:BY:
PROJECT TITLE:
KERR SPILLWAY COMPOSITE STOPLOG
www.creativecompositesgroup.com
SHOP DRAWINGS
DRAWING NO.: REVISION:
AL
CHECKED:
JH
DESIGNED:
LB
DRAWN:
PAGE TITLE:
INITIAL RELEASE
REV:
Composite Advantage
750 ROSEDALE DRIVE
DAYTON, OH 45402
(937) 723-9031
FAX: (937) 723-9034
E
AS BUILT DETAILS
PART SERIAL # WEIGHT
STOPLOG ASY STEP 3
SBR SEAL
TOTAL WEIGHT:
Q. C. NOTES
STOPLOG #: ____________________
SERIAL #: ______________________
SEAL HOLES MATCH DRILLED & TAPPED YES / NO
SEAL HOLES CLEARED & CHASED YES / NO
SEAL INSTALL ACCEPTED YES / NO
ESTIMATED WEIGHT: 10,503 LBS 1) SBR SEAL HOLES TO BE MATCH DRILLED AT 3
4"
AND TAPPED AT 58"-11. SCREWS INSTALLED USING
LOCTITE PRIMER AND LOCTITE 243.
STOPLOG ASSEMBLY 4
SCALE: 1 : 30
STOP LOG DESIGNATION NUMBER:
STOP LOG CONTROL DIMENSIONS
DIMENSIONS DESIGN
VALUE
MEASURED
VALUE
DEVIATION
(IN)
1 135 8" 1
4" 2 2343
4" 1 4"
3 2293 4" 1
4" 4 2593
16" 1 2"
5 2593 16" 1
2" 6 120" 1
4" 7 153
8" 1 4"
OUT-OF-PLANE CORNER DIMENSIONS
LOCATION DEVIATION (IN)
CORNER A RELATIVE TO
PLANE DEFINED BY
CORNERS B, C, & D
STRAIGHTNESS (BOW)
EDGE
MEASURED VALUE
8" PER 10'-0"
AC
BD
WEIGHT
DESIGN VALUE MEASURED
VALUE
DEVIATION
10,316 LBS 475 LBS
VERTICAL PLUMBNESS WHILE HANGING
DESIGN VALUE MEASURED
VALUE
DEVIATION
(IN)
0" 1 4"
ITEM NO. QTY. PART NUMBER DESCRIPTION LOCATION / USE
1 1 SL ASY S3 STOPLOG ASSEMBLY STEP 3 -----
2 1 SBR SEAL MOLDED GATE SEAL ASSEMBLY WITH TEFLON CLADDING OPEN FACE OF ASSEMBLY
3 60 FT180.356.240A 21
2" x 316" VINYL ESTER PULTRUDED STRIP (FT) MOUNT SBR SEAL
5 112 92790A218 1 2"-13 x 13
4" ASTM A193 GRAD B8M HEX HEAD BOLT MOUNT SBR SEAL
6 112 90107A033 1
2" 316SS FLAT WASHER MOUNT SBR SEAL
7 2 BEARING BAR CUSTOM 316SS BEAR BAR ASSEMBLY
D
BA
C
" 2 31
2"
DOWNSTREAM UPSTREAM
120" 1
4"
UPSTREAM
DOWNSTREAM
* BASED ON SHOP INSTALLED 12" THICK SHIM PLATES
" 2 31
2"
K7OPNMSA
Highlight
File details come from the government source that posted it. Updated .