A22 - Enclosure G - WKS Outlet Tower and Gate Drawings and Crane Setup.pdf

These are architectural and engineering drawings for Dam and Outlet Works prepared by the U.S. Army Corps of Engineers. The document set consists of multiple technical drawings and a conceptual 3D model depicting structural plans, sections, and details for a dam facility.

The drawings include comprehensive specifications for various structural components, including a tower structure with detailed elevation plans at multiple heights (939.0, 977.25, 1022.5); a bridge entrance with connection details and note angles; beam layout axis specifications; typical sections through the tower and bridge; plate girder details; expansion joint specifications; gate structure details including monorail stops, shackles, and chain connections; hoist frame assemblies; emergency gate lift chain systems; and storage rack details. Additional specifications cover lock assemblies, bottom seal assemblies, wheel assemblies, and various connection details for abutments, foundations, and base plates. The drawings indicate a 70-foot clearance between roof deck and gate deck, specify that the new gate installation location and gate deck are accessible only by boat (with USACE supplying), and reference a hoist being replaced. A supplementary 3D model provides a top-view representation showing the tower, bridge, beam, hoist support, and crane positioning with extended front outriggers, noting that measurements should be verified from the drawings or site visits and that crane selection may require layout adjustments.