101-UAC03C04v_01_0 PERFORM FIELD MAINTENANCE ON MACHINE GUN 5.56MM, M249.pdf

PDF 269 KB Posted

Attached to
Small Arms Maintenance (SAM 31)
Solicitation number
W912PB-27-Q-A004
Issued by

About this file

This is a CRM Lesson Plan Report for training unit armorers on performing field maintenance on the M249 Saw (5.56mm machine gun). The lesson is designated 101-UAC03C04 / 01.0, was approved on August 8, 2025, and is classified as Unclassified with restricted foreign disclosure (FD3) preventing use to instruct international military students.

The lesson comprises six learning steps: demonstrating knowledge of M249 equipment characteristics and major components; clearing the weapon; disassembling the M249; reassembling the M249; performing a function check; and conducting preventive maintenance checks and services (PMCS). Instruction requires 8 hours and 0 minutes of academic/resident hours plus 3 hours and 20 minutes of instructor action hours. The lesson uses a 1:10 military instructor-to-student ratio for most demonstrations and 1:30 for discussion/summary sections. Required equipment includes one M249 machine gun, Mount Machine Gun M192, industrial goggles, repairman's small arms toolkit, two Dell M4500 laptop computers, iPad 2, printer, interactive pen display, and classroom space accommodating 1:30 student ratio. Instruction references Technical Manual TM 9-1005-201-10 (Operator Manual for M249), TM 9-1005-201-23&P (Field Maintenance Manual), DA Pam 750-8 (TAMMS Users Manual), and ARIMS User Guide. Support personnel requirements include one armorer and one computer system analyst. Students are evaluated on a GO/NO-GO basis for disassembly/assembly procedures and field maintenance performance, and must receive a GO to be successful.

View the file

Other files

Show all 14

On GovTribe

Work with this file

  • Download the original file
  • Contacts named in this file
  • Similar government files
  • Ask GovTribe AI about this file

Text version

CUI

CRM LESSON PLAN REPORT

PERFORM FIELD MAINTENANCE ON MACHINE GUN, 5.56MM, M249

101-UAC03C04 / 01.0 ©

Approved 08 Aug 2025

Effective Date: 08 Aug 2025

SCOPE:

This lesson introduces the newly designated unit armorer on how to perform Field Maintenance on the M249 Saw. The expected learning outcomes is for the student to be able to perform Field Maintenance on the M249 Saw in accordance with TM 9-1005-201-10, TM 9-1005-201-23&P and DA Pam 750-8, finding all deficiencies without error. This lesson supports the Army Learning Area (ALA) of professional competence, and General Learning Outcome (GLO) 14, Soldiers and Civilians are technically and tactically competent. The goal of this lesson is to provide the Student with the knowledge and skills to perform Field Maintenance on the M249 Saw without supervision and to the standards outlined in TM 9-1005-201-10, TM 9-1005-201-23&P, DA Pam 750-8 and ARIMS User Guide.

Distribution Restriction: Distribution authorized to U.S. Government agencies and their contractors only Export Controlled. This determination was made on 17 May 2011. Insert US Army Tank and Armaments Command 6501 E. 11 Mile Rd., Detroit Arsenal, MI 48397 Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of the document Foreign Disclosure: FD3 - This training product has been reviewed by the developers in coordination with the M249 foreign disclosure officer. This training product cannot be used to instruct international military students.

SECTION I. ADMINISTRATIVE DATA

All Course Masters/POIs Including This Lesson

Courses

Course Number

None

POIs

Version Title Phase Status

Task(s) Taught(*) or Supported

Reinforced Task(s)

Knowledge

Skill

Administrative/ Academic Hours

Instructor Action

Test Lesson(s)

Prerequisite

POI Number Version Title Phase Status

Task Number Task Title Status

Task Number

Task Title

Status

Knowledge Id

K22092

Title

Understand general PMCS principles and procedures

Taught

Yes

Required

No

Skill Id

101-S-M014

Ability to perform PMCS on equipment used.

Taught

No

The administrative/academic (50 min) hours required to teach this lesson are as follows:

Academic Resident Hours / Methods

Yes

1 hr 0 hrs 6 hrs

10 mins 15 mins 25 mins

Discussion (Small or Large Group) Reflective Discussion Demonstration

Total Hours(50 min): 8 hrs 0 mins

The instructor action (60 min) hours required to teach this lesson are as follows:

Hours/Actions

Lesson(s)

0 hrs 15 mins Classroom Breakdown

0 hrs 15 mins Classroom Setup 1 hrs 0 mins Logistics Support – Weapon 0 hrs 25 mins Student Counseling 1 hrs 0 mins Student Re-test 0 hrs 25 mins Student Re-train

Total Hours (60 min): 3 hrs 20 mins

Lesson Number Version

Lesson Title

Lesson Number Version

Lesson Title

Training Material Classification

Security Level: This course/lesson will present information that has a Security Classification of: U - Unclassified.

Foreign Disclosure Restrictions

References

Student Study Assignment

Requirements

FD3. This training product has been reviewed by the developers in coordination with the M249 foreign disclosure officer. This training product cannot be used to instruct international military students.

Number

Date ARIMS User Guide Army Records Information Management System

(ARIMS) User Guide 04 Aug 2022

DA PAM 750-8 The Army Maintenance Management System (TAMMS) Users Manual

22 Aug 2005

TM 9-1005-201-10 OPERATOR MANUAL FOR MACHINE GUN,

5.56MM, M249 W/EQUIP (NSN 1005-01-127-7510)

(EIC: 4BG) (AR ROLE) (NSN 1005-01-451-6769)

(EIC: 4BK) (LMG ROLE)

31 May 2019

TM 9-1005-201-23&P ELD MAINTENANCE MANUAL (INCLUDING

REPAIR PARTS ANDSPECIAL TOOLS LIST) FOR

MACHINE GUN, 5.56 MM, M249 W/EQUIPMENT

(AR ROLE) NSN1005-01-127-7510 (EIC 4BG)

MACHINE GUN, 5.56 MM, M249 W/EQUIPMENT

(LMG ROLE)NSN 1005-01-451-6769 (EIC 4BK)

15 Oct 2014

Primary Instructor and Assistant Instructor(s)

Support Personnel

Additional Support Personnel Requirements

Armorer Computer System Analyst

Student

Man

Name Ratio Qty Hours

Armorer Remarks: Armorer required to issue and receive weapons from the armsroom and to be on standby to assist with weapons.

0:0 1 1.0

Computer System Analyst Remarks:

0:0 1 8.0

Equipment for Instruction

ID - Name Student

Materials

Classroom, (Note: Asterisk before ID indicates a TADSS.)

Instructor Materials:

1. Lesson Plan

2. Practical Exercise (PE)

3. Practical Exercise Solution

4. Required publications.

5. Safety Goggles.

6. TMs

Student Materials:

1. Student Handout.

2. Practical Exercise.

3. Required publications.

4. Pen or pencil.

5. Safety Goggles.

and Range Training Area, Ratio Ratio Spt Qty Exp

1005-01-127-7510 - Machine Gun,

5.56 Millimeter: M249

Remarks:

1:1 0:0 No 1 No

1005-01-503-0141 - Mount, Machine Gun: M192 Remarks:

1:6 0:0 No 1 No

4240-01-504-0052 -

GOGGLES,INDUSTRIAL

Remarks:

1:1 1:1 No 0 No

5180-00-357-7770 - Tool Kit, Repairman's, Small Arms Remarks:

1:10 0:0 No 1 No

7021-01-C14-3190 - Computer, Micro Lap-Top Portable AC: M4500 Dell Remarks: 1 Required for Instructor 1 Required at Monitor's Table

0:0 0:0 No 2 No

7021-01-D01-0269 - PC Tablet, Data Entry: IPAD 2 WIFI 64GB Apple Remarks:

1:1 0:0 No 1 No

7025-01-C11-4208 - Printer, Daisy Wheel/Dot Matrix/:2335DN MFP Dell Remarks:

0:0 0:0 No 1 No

7050-01-C14-4309 - Interactive Pen Display: ID422W Smart Remarks:

0:0 0:0 No 1 No

7490-01-T00-0291 - Card Programmer: RFC-03G Turning Technologies Remarks:

1:1 0:0 No 0 No

7490-01-T00-0292 - Card Programmer: XRC-R02 Turning Technologies

1:30 0:0 No 0 No

6. TMs

ID - Name Quantity Student Ratio

Setup Mins

Cleanup Mins

17135-3000 Laboratory Instructional Building, 3000 Square Foot

1:30 20 30

Ammunition Requirements DODIC - Name Exp

Student

Ratio

Instruct

Ratio

Spt Qty

AB46 - Dummy Cartridge, 5.56 Millimeter

N 5:1 5:1

Instructional Guidance/ Conduct of Lesson

Proponent Lesson Plan Approvals

NOTE: Before presenting this lesson, instructors must thoroughly prepare by studying this lesson and identified reference material.

NOTE: Instructor/Facilitator will ensure to incorporate OE Experiences.

ARMY LEARNING MODEL

All instructors/facilitators will facilitate training under the Army Learning Model. Ensuring training is based on quality, relevance and effectiveness of face-to-face learning experiences through outcome-oriented instructional strategies. This type of instruction will foster critical thinking, initiative and operational relevance in context.

OE INTEGRATION

Instructors/facilitators will facilitate conversations from students and relate this lesson to current operational environments (OE) using personal experiences and/or examples obtained from the Center of Army Lessons Learned (CALL). Instructors/facilitators should provide sufficient OE variables and scenarios to produce the desired soldier training outcome for this lesson.

NOTE: Verify that training data is loaded on the system before beginning this lesson.

Name Rank Position Date michelle.r.brown8.civ Not available Approver 08 Aug 2025

SECTION II. INTRODUCTION

Method of Instruction: Discussion (Small or Large Group) Mode of Delivery: Resident Instruction

Instr Type (I:S Ratio): Military - ICH (1:30) Time of Instruction: 10 mins

Motivator Instructor Note: Have class draw weapons from the arms room.

You are the Unit Armorer responsible for the field maintenance of small arms. The unit armorer is an important job requiring strict attention to detail and you must have the skills and the ability to perform all field maintenance tasks. You will also prepare, maintain, submit, and file all maintenance requirements for the unit's organizational weapons. If the M249 machine gun is not maintained to required standards, the weapon may not operate, accident or injury could result, unit readiness will be degraded, and your unit will not be prepared to perform its wartime mission.

Introduce the lesson to the students.

Terminal Learning Objective

Safety

NOTE. Inform the students of the following Terminal Learning Objective requirements.

At the completion of this lesson, you [the student] will:

Action: Perform Field Maintenance on Machine Gun, 5.56mm, M249.

Conditions:

In a classroom environment, given the requirement to perform field maintenance on the M249 SAW. Given TM 9-1005-201-10, TM 9-1005-201-23&P, DA Pam 750-8. blank DA Form 2404, blank DA Form 2407, armorer toolkit, safety equipment, CLP/LSA, pen or pencil, M199A1 dummy rounds, and a Machine Gun 5.56mm M249.

Standards:

Perform field maintenance on the Machine Gun 5.56mm M249 by finding all deficiencies without error.

Learning Domain - Level: Psychomotor - Imitation

No JPME Learning Areas Supported: Supports GLO 10 & 11.

General classroom, weapon and electrical equipment safety procedures will be followed.

Before starting and inspection and/or performing any maintenance procedures, be sure to clear the weapon. During the clearing procedure always keep the weapon pointed in a safe direction.

A potential safety hazard exists if the weapon is assembled or disassembled incorrectly.

Risk Assessment Level

Students will ensure that safety glasses are worn at all times during the assembly and disassembly of the weapon.

Low - Return Rod and Transfer Mechanism Assessment: If not removed properly, the return rod and transfer mechnaism can expel causing injury.

Controls:

1. Incorporate procedures and warnings as described in TM 9-1005-201-23&P.

2. Additional instruction and supervision.

3. Ensure bolt is forward.

4. Wear Safety Googles.

5. Step by Step procedures for disassembly/assembly.

Leader Actions:

1. When possible, additional instructor will assist the primary instructor during the block of instruction.

2. Primary Instructor will utilize "stop-go" method when training. Student will notproceed until told to do so. Instructor will spot-check each weapon.

3. Continually emphasize safety to the students. Let students know what the outcome will be if procedures are not followed exactly as prescribed.

Environmental Considerations

Instructional Lead-in

NOTE: Instructor should conduct a risk assessment to include environmental considerations IAW the current environmental considerations publication, and ensure students are briefed on hazards and control measures.

NOTE: It is the responsibility of all Soldiers, DA civilians, and Contractors to protect the environment from damage.

NOTE: Have dirty rags turned in and cleaned on a weekly basis.

Explain to the soldier that performing field maintenance on small arms is similar to performing maintenance on a car. It is important to keep your car in good running condition so you can get back and forth to work. In the U.S. Army, weapons must be maintained to specified standards so the unit can successfully perform its mission in peacetime and war.

SECTION III. PRESENTATION

TLO - LSA 1. Learning Step / Activity TLO - LSA 1. Demonstrate knowledge of equipment Characteristics, Capabilities, Features, and Major Components of the M249.

Method of Instruction: Discussion (Small or Large Group)

Instr Type (I:S Ratio): Military - ICH (1:10)*

Time of Instruction: 1 hr Media Type: Actual Equipment / PowerPoint Presentation Other Media: Unassigned

Security Classification: This course/lesson will present information that has a Security Classification of: U - Unclassified.

Note: Marked as (*) is derived from the parent learning object

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-10, WP 0004-1

SLIDE 2 OFF:

SLIDE 3 ON:

a. CHARACTERISTICS: The M249 machine gun is belt-fed, gas-operated, air cooled and fires from the open bolt position and also has a 30-round magazine feeding capability for emergency firing procedures and is fielded with two barrel assemblies.

b. CAPABILITIES: The M249 machine gun can be used as an Automatic rifle or as a Light Machine Gun

(LMG) an it can be fired from the shoulder or hand-held position, bipod steadied position, the tripod mounted machine gun position, or from the pedestal or ring mount position. The M249 Machine Gun has two barrel assemblies to extend the life of the barrels, retain accuracy, and allow for sustained firing.

c. FEATURES: The quick-change barrel is air-cooled and has a fixed headspace. The bolt is a multiple-lug type which rotates into a positive locked position in the barrel extension prior to firing. Gas is taken from the barrel acting on a piston directly fixed to the bolt carrier (slide). The barrel has a folding carrying handle. The

M249 Machine Gun is equipped with a spare barrel in addition to the weapon barrel assembly and contains a MIL-STD_1913 rail on the feed tray cover is capable of mounting various electro-optical devices.

INSTRUCTOR NOTE: Show students' location of major components as they are discussed.

d. DESCRIPTION OF MAJOR COMPONENTS:

1) Heatshield Assembly: (Figure 2, Item 1). Provides protection for the operator's hand from a heated barrel.

2) Barrel Assembly: (Figure 2, Item 2). Houses cartridge for firing, directs projectile, and supports fixed front sight. The barrels have a “mono-block” design that eliminate the separate gas collar and gas regulator.

3) Receiver Assembly: (Figure 2, item 4). Serves as a support for all major components. Houses action of weapon and controls functioning of a weapon through a series of guide rails.

4) Rear Sight Assembly: (Figure 2, Item 4). Rear sight is adjustable for both windage and elevation.

5) Cover and Feed Mechanism Assembly: (Figure 2, Item 5). Provides support for rear sight and means for gaining access to feed tray. By means of cam and lever action, feeds linked belt ammunition and holds cartridges in position for stripping, feeding, and chambering. Cover also provides a mounting base for optical devices.

6) Feed Tray Assembly: (Figure 2, Item 6). Serves as a guide for positioning cartridges, to assist in chambering. Has pawls to assist loading belted ammunition.

7) Bolt Assembly: (Figure 2, Item 7). Provides stripping, chambering, firing, and extraction using the propellant gases and recoil spring for power.

8) Light Weight Collapsible Buttstock: (Figure 2, Item 8). Serves as a shoulder support for aiming and firing the M249 Machine Gun. Contains a folding shoulder rest and a hydraulic buffer and is adjustable to five lengths.

9) Slide Assembly: (Figure 2, Item 9). Houses the bolt assembly, firing pin and roller assembly and cams bolt assembly to lock and unlock.

10) Piston Assembly: (Figure 2, Item 10). Transfers power from propelling gases to bolt and slide assemblies to function the M249 Machine Gun (move recoiling-parts rearward).

11) Spring, Helical, Drive: (Figure 2, Item 11). Provides power to the piston assembly for moving slide and bolt assemblies forward during weapon functioning.

12) Return Rod and Transfer Mechanism Assembly: (Figure 2, Item 12). Absorbs recoil from bolt, slide, and piston assemblies at the end of recoil movement, and transfers recoil pressure to the buffer.

13) Trigger Mechanism Assembly: (Figure 2, Item 13). Houses the trigger, sear and safety, and controls the firing of the M249 Machine Gun.

14) Front Rail Assembly: (Figure 2, Item 14). Provides additional locations for mounting of the hardware.

15) Bipod, Assembly: (Figure 2, Item 15). Supports M249 Machine Gun in prone/sitting position. The telescopic legs can be individually adjusted to three different heights.

16) Gas Cylinder Assembly: (Figure 2, Item 16). Locks bipod in place on receiver and provides passageway for operating gases.

SLIDE 3 OFF:

SLIDE 4 ON:

Check on Learning:

Review Summary:

Q: What is the 1st Description Major Component of the M249?

A: Heatshield Assembly: (Figure 2, Item 1). Provides protection for the operator's hand from a heated barrel.

REF: TM 9-1005-201-10.

Q: What is the 3rd Description Major Component of the M249?

A: Receiver Assembly: (Figure 2, Item 4). Serves as a support for all major components. Houses action of weapon and controls functioning of a weapon through a series of guide rails.

REF: TM 9-1005-201-10. WP 0002-3

Conduct a Review/Summary of the information presented in the Learning

Step.

SLIDE 4 OFF:

SLIDE 5 ON

TLO - LSA 2. Learning Step / Activity TLO - LSA 2. Clear the M249 Machine Gun.

Method of Instruction: Demonstration

Instr Type (I:S Ratio): Military - ICH (1:10)* Time of Instruction: 1 hr

Media Type: Actual Equipment Other Media: Unassigned

Security Classification: This course/lesson will present information that has a Security

SLIDE 5 ON:

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-10, WP 0005-1 – 0005-5.

a. Point the weapon in a safe direction.

b. Ensure Safety (Figure 1, Item 1) is to left (RED BAND visible).

c. With the right palm up, pull the Charging Handle (Figure 2, Item 4) completely to the rear ensuring the

Bolt is locked to the rear.

d. While holding the Charging Handle (Figure 2, Item 4) move the Safety (Figure 2, Item 2) to the SAFE position (RED BAND NOT visible) by pushing the Safety (figure 2, Item 2) to the right.

e. Return Charging Handle (Figure 2, Item 4) forward until click is heard.

f. Prior to raising the Feed Tray Cover Assembly (Figure 2, Item 3), look away in a safe direction.

g. Belt Fed

h. Squeeze cover latches (Figure 2, Item 1) to open the Feed Tray Cover Assembly (Figure 2, Item 3).

i. Remove ammunition belt and any loose links on Feed Tray (Figure 2, Item 5).

j. Magazine Fed

k. When the magazine used, push down on the magazine release tab and pull the magazine out of the

Magazine Well (Figure 2, Item 6).

l. Squeeze cover latches (Figure 2, Item 1) to open Feed Tray Cover Assembly (Figure 2, Item 3).

NOTE: If no ammunition present, skip to step 9.

m. Conduct a five-point safety check and remove any brass, links or ammunition.

n. If chamber is clear, lower the feed tray assembly.

o. Check the Feed pawl assembly (Figure 3, Item 5) under the Feed Tray Cover Assembly (Figure 3, Item

1).

p. Check the Feed Tray Assembly (Figure 3, Item 2).

q. Lift the Feed Tray Assembly (Figure 3, Item 2) and inspect the chamber (Figure 3, Item 3).

r. Check the Magazine Well (figure 3, Item 4).

s. Check the space between the face of the bolt and the chamber (Figure 3. Item 3) as well as the space under the bolt and operating rod.

t. Lower the feed tray assembly (Figure 3, Item 2).

u. Close the Feed Tray Cover Assembly (Figure 3, Item 1), making sure securely locks.

v. Pull the Charging Handle (Figure 4, Item 2) to the rear with the right palm facing up and continue to hold.

w. Move the safety (Figure 4, Item 1) to the FIRE position (RED BAND visible) by pushing it to the left.

x. Squeeze the Trigger (Figure 4, Item 3) with the left hand and ease the bolt forward to close and lock.

y. Release the Trigger (Figure 4, item 3).

z. Close cover assembly, ensuring that it locks shut.

aa.Push safety to left (RED BAND visible).

bb.Hold cocking handle to rear, pull trigger, and ride bolt forward to close and lock.

INSTRUCTOR NOTE: Have students practice the clearing procedure to ensure understanding.

SLIDE 5 OFF:

SLIDE 6 ON:

Q: What is the 1st step when clearing the M249?

A. Point the weapon in a safe direction

REF: TM 9-1005-201-10. WP 0005-1

Q. What is the 14th step when clearing the M249?

A. Move the safety (Figure 4, Item 1) to the FIRE position (RED BAND visible) by pushing it to the left.

REF: TM 9-1005-201-10. WP 0005-5

Determine if the students have learned the material presented by soliciting student questions and explanations. Ask the students questions and correct misunderstandings.

SLIDE 6 OFF:

SLIDE 7 ON:

TLO - LSA 3. Learning Step / Activity TLO - LSA 3. Disassemble the M249 Machine Gun.

Instr Type (I:S Ratio): Military - ICH (1:10)*

Time of Instruction: 1 hr 15 mins Media Type: Actual Equipment

Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-10, WP 0006-2 – WP 0006-9

a. Disassemble the M249 Machine Gun.

1) Pull and lock the Charging Handle (figure 1, Item 6) to the rear.

2) Ensure Safety (Figure 1, Item 4) is to the left (RED BAND visible).

3) Hold Charging Handle (Figure 1, Item 6) with one hand.

4) Squeeze the Trigger (Figure 1, Item 5) and the ride the Charging Handle (Figure 1, Item 6) slowly forward.

5) Ensure Charging Handle (Figure 1, Item 6) is fully forward and locked.

6) Squeeze Cover Latches (Figure 1, Item 2) and raise Cover Assembly (Figure 1, Item 1).

7) Pull the Upper retaining Pin (Figure 1, Item 3) to the left.

8) Pivot the Lightweight Collapsible Buttstock (Figure 2, Item 3) downward so the rear opening on the receiver is completely opening (Figure 2, Item 2) on the receiver (Figure 2, Item 1) is completely open.

WARNING: Return Rod and Transfer Mechanism are under spring pressure. Failure to comply may result in injury or death to the personnel. Seek immediate medical attention if injury occurs.

9) Hold weapon with one hand on the Receiver (Figure 3, Item 2).

10) Simultaneously push in and upward on the rear end of Return Rod and Transfer Mechanism Assembly

(Figure 3, Item 1).

11) The Return Rod and Transfer Mechanism Assembly (Figure 3, Item 1) are now released from positioning groove inside the Receiver (Figure 3, Item 2).

12) Withdraw the Return Rod and Transfer Mechanism Assembly (Figure 3, Item 1) and Spring.

13) Separate Spring (Figure 4, Item 2) from Return Rod and Transfer Mechanism Assembly (Figure 4, Item

1).

14) Pull the Charging Handle (Figure 5, Item 1) rearward.

15) Slide the moving parts (Figure 5, Item 2) out of the rear of the Receiver (Figure 5, Item 3)

16) Push the Bolt (Figure 6, Item 1) slightly into the Slide Assembly (Figure 6, Item 3) and rotate counter c-clockwise to disengage the Lug (Figure 6, Item 2) and pull the Bolt (Figure 6, Item 1) out of the Slide

Assembly (Figure 6, Item 3).

17) Push the Slide Pivot (Figure 6, Item 4) to the left using a cleaning rod Section (Figure 6, Item 6) and lift the Slide Assembly (Figure 6, Item 3) from the Piston Assembly (Figure 6, Item 5).

18) Pull Lower Retaining Pin (Figure 10, Item 1) to the left.

19) Remove the Lightweight Collapsible Buttstock (Figure 10, Item 2) by pulling the Lightweight Collapsible

Buttstock (Figure 10, Item 2) rearward while supporting the Trigger Mechanism (Figure 10, Item 3).

20) Remove Trigger Mechanism (Figure 10, Item 3) rearward and down.

21) While holding the weapon, grasp the Heatshield (Figure 9, Item 2) forward of the Carrying Handle

(Figure 9, Item 3) and lift the Heatshield (Figure 9, Item 2) off the Barrel (Figure 9, Item 1).

22) Ensure Carrying handle (Figure 10, Item 2) on Barrel (Figure 10, Item 1) is in carrying (up) position.

23) Depress the Locking Lever (Figure 10, Item 3) of the Barrel (Figure 10, Item 1) with left hand.

24) Hold the Carrying handle (Figure 11, Item) with right hand and lift the Barrel (Figure 11, Item 1) up and push the Barrel (Figure 11, Item 1) forward.

25) Turn Gas Cylinder (Figure 12, Item 2) to the left or right to release the Locking Spring (not shown) inside the Receiver (Figure 12, Item 1).

26) While supporting Receiver (Figure 12, Item 1) with the other hand and pulling with slight pressure, turn the Gas Cylinder (Figure 12, Item 2) to release from the Receiver (Figure 12, Item 1).

27) Pull Gas Cylinder (Figure 12, Item 2) out of the Receiver (Figure 12, Item 1).

28) Separate the Bipod (Figure 13, Item 2) from the Receiver (Figure 13, Item 1).

SLIDE 7 OFF:

SLIDE 8

ON:

Q: What is the 5th step when disassembling the M249?

A. Ensure Charging handle (Figure 1, Item 6) is fully forward and locked.

REF: TM 9-1005-201-10. WP 0006-2

Q. What is the 14th step when disassembling the M249?

A. Pull the Charging Handle (Figure 5, Item 1) rearward.

REF: TM 9-1005-201-10. WP 0006-5

Step

TLO - LSA 4. Learning Step / Activity TLO - LSA 4. Reassemble the M249 Machine Gun

Instr Type (I:S Ratio): Military - ICH (1:10)*

Time of Instruction: 1 hr 15 mins Media Type: Unassigned

Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-10, WP 0006-9 – 0006-15.

1) Install the Bipod Yoke (Figure 14, Item 2) on Receiver (Figure 14, Item 1).

2) Push the Gas Cylinder (Figure 14, item 3) through the Bipod Yoke (Figure 14, Item 2) into the Receiver

(Figure 14, Item 1).

3) Push the Gas Cylinder (Figure 14, Item 3) to the rear while countering the pressure of the Locking Spring inside the Receiver (Figure 14, Item 3) into Receiver (Figure 12, Item 1) with the other hand applying downward pressure while rotating the Gas Cylinder (Figure 14, Item 3) until fully seated in Receiver (Figure

14, Item 1).

4) Turn the Gas Cylinder (Figure 14, Item 3) until the locking Spring inside the Receiver (Figure 14, Item 1) clicks into the Recess (Figure 14, Item 4) at the rear of the Gas Cylinder (Figure 14, Item 3).

5) Depress the Barrel locking Lever (Figure 15, Item 3) with left hand.

6) Holding the Carrying Handle (Figure 15, Item 2) with other hand, place Barrel (Figure 13, Item 1) on the

Receiver (Figure 15, Item 4). Pull the Barrel (Figure 15, Item 1) rearward, keeping the Gas Plug (Figure 15, Item 6) lined up with the Gas Cylinder (Figure 15, Item 5).

7) Release Barrel Locking Lever (Figure 15, Item 3).

8) Install Heatshield (Figure 16, Item 2) by hooking the metal extensions of the Heatshield (Figure 16, Item

2) under the Front Sight Pins (Figure 16, Item 1).

9) Snap the Spring Clips (Figure 16, Item 3) down on the top of the Barrel (Figure 16, Item 5).

10) Close Feed Tray Cover (Figure 16, Item 4).

NOTE: If positive retention doesn’t exist with both grooves of the retention (pivot) pin, notify Field

Maintenance.

11) Place the Slide Assembly (Figure 17, Item 1) onto the Piston (Figure 17, Item 3). Secure by pushing Slide Pivot from the left to the right through hole in the Piston Assembly (Figure 17, Item 2)

12) Insert the bolt Assembly (Figure 18, Item 1) into the Slide Assembly (Figure 18, Item 2).

13) Rotate the Bolt Assembly (Figure 18, Item 1) clockwise and hook the driver lug into the Slide Assembly

(Figure 18, Item 2).

14) Align the bolt and slide cutouts with the Internal Receiver Rails (Figure 19, Item 1) and start to insert the moving parts (Figure 19, Item 2) into the Receiver (Figure 19, item 4) with the Feed Cover open.

15) Insert the gas piston into the rear of the gas cylinder inside the Receiver (Figure 19, Item 4).

NOTE: Squeezing the trigger drops the sear inside the trigger assembly allowing the moving parts to the move forward.

16) Squeeze the Trigger (Figure 19, Item 3) and allow the moving parts (Figure 19, Item 2) to slide all the way forward.

CAUTION: Ensure proper assembly of the transfer mechanism. Failure to comply may result in damage to receiver.

17) While rotating in either direction, slide Drive Spring (Figure 20, Item 1) on the Return Rod and

Transfer Mechanism Assembly (Figure 20, Item 2).

18) Hold Return Rod and Transfer Mechanism Assembly (figure 21, Item 2) with: side up” stamp in the up position with the flared end of the Pin (Figure 21, Item 3) facing down.

19) Install the Drive Spring and Return Rod and Transfer Mechanism Assembly (Figure 21, Item 2) into the rear of the moving parts inside the Receiver (Figure 21, Item 1).

20) Using thumb, press in and down on the rear of the Return Rod and Transfer Mechanism

Assembly (Figure 21, Item 2) until the two pins are positioned in the grooves inside of the Receiver (Figure

21, Item 1).

21) Ensure Lower Retaining Pins (Figure 22, Item 1 and Item 2) are all the way to the left.

22) Install Trigger Mechanism (Figure 22, Item 4) aligning the rear holes (Figure 22, Item 3) with the

Lower Retaining Pin (Figure 22, Item 2), and push the Lower Retaining Pin (Figure 22, Item 2) into the left side hole of the Trigger Mechanism (Figure 22, Item 4).

23) Supporting Trigger Mechanism Assembly (Figure 23, Item 3) align lower hole on Lightweight

Collapsible Buttstock (Figure 23, Item 2) with Lower Retaining Pin (Figure 23, Item 1).

24) Push Lower Retaining Pin (Figure 23, Item 1) to the right.

25) Pivot the Buttstock and Buffer Assembly (Figure 24, Item 2) into upward position.

26) Push the upper Retaining Pin (Figure 24, Item 1) to the right.

Determine if the students have learned the material presented by soliciting student

SLIDE 9 OFF:

SLIDE 10 ON:

Q: What is the 1st step when reassembly of the M249?

A. Install the Bipod Yoke (Figure 14, Item 2) on Receiver (Figure 14, Item 1)

REF: TM 9-1005-201-10. WP 0006-9

Q: What is the 21st step when reassembly of the M249?

A. Ensure Lower Retaining Pins (Figure 22, Item 1 and Item 2 are all the way to the left

REF: TM 9-1005-201-10. WP 0006-14

Step

SLIDE 10 OFF:

TLO - LSA 5. Learning Step / Activity TLO - LSA 5. Perform a Function Check on the M249 Machine Gun.

Instr Type (I:S Ratio): Military - ICH (1:10)*

Time of Instruction: 1 hr 15 mins Media Type: Actual Equipment

Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security

SLIDE 11 ON:

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-10, WP 0007-1 - WP 0007-2.

1) Ensure Safety (Figure 1, Item 3) is to the left (RED BAND visible) and charge the weapon by pulling the

Charging Handle (Figure 1, Item 1) to the rear to lock the bolt.

2) Push Charging Handle (Figure 1, Item 1) forward until it clicks.

3) Push Safety (Figure 1, Item 3) to the right (RED BAND NOT visible).

4) Squeeze the Trigger (Figure 1, Item 2) (nothing should happen).

5) Pull and hold the Charging Handle (Figure 1, item 1) to the rear.

6) Push Safety (Figure 1, Item 3) to the left (RED BAND visible.)

7) Squeeze the Trigger (Figure 1, Item 2) and ride the bolt assembly forward to close and lock on empty chamber.

8) If, for any reason the weapon fails the function test, check for missing or improperly assembled components. If the reason for failure cannot be detected, notify Field Maintenance. Air Force only: SEE

CATM. With bolt assembly held to the rear, check for clear weapon.

SLIDE 11 OFF:

SLIDE 12 ON:

Q. What is the 1st step when performing a functions check?

A. Ensure Safety (Figure 1, Item 3) is to the left (RED BAND visible) and charge the weapon by pulling the Charging Handle (Figure 1, Item

1) to the rear to lock the bolt.

REF: TM 9-1005-201-10. WP 0007-1

Q. What is the 4th step when performing a functions check?

A. Squeeze the Trigger (Figure 1, Item 2) (nothing should happen).

REF: TM 9-1005-201-10. WP 0007-1

Conduct a Review/Summary of the information presented in the Learning Step.

SLIDE 12 OFF:

TLO - LSA 6. Learning Step / Activity TLO - LSA 6. Perform preventive maintenance on the M249 Machine Gun

Instr Type (I:S Ratio): Military - ICH (1:10)*

Time of Instruction: 1 hr 30 mins Media Type: Actual Equipment

Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security

SLIDE 13 ON:

INSTRUCTOR NOTE: Refer students to TM 9-1005-201-23 &P, pg. 0006-1/2 for preventive maintenance checks and services (PMCS).

1. Unit personnel must perform Preventive Maintenance Checks and Services (PMCS) (WP 0007) to ensure the M249 Machine Gun is in good operating condition and ready for its primary mission.

2. To ensure maximum operational readiness, it is necessary that the M249 Machine Gun be inspected at regular intervals so that any defects can be discovered and corrected before serious damage or failure occurs. Any discovered maintenance problems beyond your authorization will be referred to field maintenance for correction.

3. Always oversee the WARNINGS and CAUTIOUS Before and during Operation. A WARNING means someone could be injured or killed. A CAUTION means equipment could be damaged. If the equipment fails to operate/troubleshoot, report any deficiencies using the proper forms. See DA PAM 750-8.

PREVENTIVE MAINTENANCE PROCEDURES

U.S. Army performs quarterly inspections found in WP 0007. To minimize malfunction, training units such as basic combat training (BCT) and on-site training (OST)), elements should perform field maintenance checks every 15 days or 15,000 rounds, whichever comes first. If the weapon has not been used for 90 days, PMCS in the Operator's Manual (TM 9-1005-201-10) should also be performed. USAF and USMC perform PMCS every 90 days to keep the weapon in proper operating condition, in accordance with Table 1 in WP 0007. If the weapon has not been used in 90 days, place it in storage according to instructions in WP 0001. If rust is observed on a weapon, perform PMCS immediately.

INSPECTION

Fieldstrip the weapon in accordance with TM 9-1005-201-10. Inspect all assemblies for missing, broken, or loose parts. Inspect all parts for cracks, dents, burrs, excessive wear, rust, or corrosion. Ensure that all items are cleaned and lubricated in accordance with TM 9-1005-201-10. Evacuate the weapon to a higher level of maintenance if repairs are not authorized. Refer to Source, Maintenance, and Recoverability (SMR) codes in WP 0026.

EXPLANATION OF COLUMNS

When recording results of PMCS, entries in the PMCS ITEM NO. column will be used for the TM Item No. column on DA Form 2404, Equipment Inspection and Maintenance Worksheet. The ITEM TO BE CHECKED OR SERVICED column indicates the component of the M249 Machine Gun to be checked. The INTERVAL column tells you when to do the check or service in the PROCEDURE column. BEFORE checks and services are performed prior to the M249 Machine Gun leaves its containment area or performs its mission. DURING checks begin when the M249 Machine Gun is being used and AFTER checks and services begin when the M249 Machine Gun is taken out of its mission mode or is returned to its containment area.

The EQUIPMENT NOT READY/ AVAILABLE IF column indicates deficiencies that must be corrected before the M249 Machine Gun can be operated.

END OF WORK PACKAGE

Instructor Note: See zip file for PMCS of M249. Zip file will contain a PowerPoint named, PMCS M249. TM 9-1005-201-23&P, page 0007-3 through 0007-15 graphic not found for sequence #:4

Instructor Notes: Refer Students to DA PAM 750-8, para 3-10. Item number of fault will be located in

PMCS of TM 9-1005-470-10.

DA Form 2404 (Equipment Inspection and Maintenance Worksheet) have four major purposes. These forms are the central record for-

1) Faults found during an inspection. These faults include PMCS, maintenance activity inspections, diagnostic checks, and spot checks, except as noted.

2) Actions taken during unit/organizational level services for quality control.

3) Faults and repairs required for estimated cost of damage (ECOD) reports.

4) Battlefield damage assessment and repair (BDAR) performed.

SLIDE 16 OFF:

SLIDE 17 ON:

INSTRUCTOR NOTE: Refer students to DA Pam 750-8, Figure 3-26. Have students complete the header information as it is explained.

1) Prepare a DA Form 2404.

1. ORGANIZATION. Enter the name of the unit to which the equipment belongs.

2. NOMENCLATURE AND MODEL.

a. Enter the noun abbreviation and the model of the equipment.

b. For watercraft, use the noun abbreviation and Hull Design Number.

3. REGISTRATION/SERIAL/NSN.

a. Enter the serial or registration number. Enter the NSN when no serial or registration number is available.

b. For watercraft, enter the DA Hull Number.

4a. MILES. When a deficiency or a shortcoming is found, enter the miles or kilometers on the equipment’s odometer at the end of operation. Round to the nearest mile or kilometer. Enter the letter K before the number if the reading is kilometers. Leave blank if the item does not have an odometer or if no faults are found.

b. HOURS. When a deficiency or a shortcoming is found, enter the hour meter reading at the end of operation. Leave blank if hours do not apply to the equipment or if no faults are found.

c. ROUNDS FIRED. Leave blank.

d. HOT STARTS. Leave blank.

5. DATE. Enter the calendar date the deficiency or shortcoming was found.

6. TYPE INSPECTION. Enter PMCS.

a. Use the same DA Form 2404 for more than 1 day. If no faults are found during the BEFORE OPERATION checks in the PMCS, enter the date in column c. If no faults are found DURING or AFTER OPERATION, initial in column e.

b. When no faults are found, this form can be used for more than 1 day even if form was used for concurrent

PMCSs, for example, W/M.

Just place the first letter of the type of PMCS performed (W/M) in column d, by the days date in column c after the PMCS was performed.

7. APPLICABLE REFERENCE.

TM NUMBER, TM DATE.

a. Enter the number and date of the PMCS TM. When two TMs cover an item, enter the second TM number and date in the second number and date block.

b. When the manual has changes, print W/C and the latest change number after the TM number. Then, enter the latest change date in the TM date block.

8a. SIGNATURE (Person(s) performing inspection). When a deficiency or shortcoming is found, the operator or supervisor signs and enters rank. A signature in this block keeps the form from being used past current dispatch.

8b. TIME. Leave blank or use as needed locally.

9a. SIGNATURE (Maintenance Supervisor). Maintenance supervisor or the commander’s designated representative signs when corrective action is taken.

9b. TIME. Leave blank or use as needed locally. For a missile system and missile subsystems reported under AR 700–138, chapter 4, enter the time when item was found to be NMC.

10. MANHOURS REQUIRED. Leave blank or use as needed locally.

TM ITEM NO. a.

a. Enter the PMCS item number that applies to the fault listed in column c. If the PMCS has no item numbers, list the page, paragraph, or sequence number. Circle the number if the fault is listed in the Equipment is not ready/available if column or Not Mission Capable if column of the PMCS. If the PMCS has no ready/available or NMC column, circle the TM item number, page, paragraph number of any fault that makes the equipment NMC.

b. Pubs or TM section other than PMCS may be required for safety faults or local dispatching. For example, AR 385–55 lists safety checks that may not be in the PMCS. Those faults are not counted as NMC for DA Form 2406 (Materiel

Condition Status Report) unless they are in the PMCS not ready column or the NMC column. But, list them if a problem is found with one of them.

c. For those faults not covered by the PMCS, leave this column blank.

STATUS b. Enter the status symbol that applies to the fault or deficiency.

DEFICIENCIES AND SHORTCOMINGS c.

a. If a fault that can be repaired is found, stop the PMCS and correct the fault. Do not enter faults that have been repaired on DA Form

2404. Continue the PMCS to make sure no other faults exist.

b. Briefly describe the fault. Skip one or two lines between faults. This gives maintenance room to note actions they take.

c. When more than one TM covers the equipment, draw a line under the last entry for one TM. Under the line, write the TM number of the manual to be used next. After the PMCS is finished and all faults that could not be fixed are listed, give the form to the maintenance supervisor.

d. When using one DA Form 2404 for more than one item of equipment, enter the serial number or administration number for the item with the fault. Write the fault on the line below the serial number. When faults not covered by the PMCS are listed, add the pub that covers them; for example, SOP or AR 385–55.

CORRECTIVE ACTION d. Explain corrective actions taken.

INITIAL WHEN CORRECTED e. The mechanic initials any faults that have been fixed. The initials go on the last line for the entry in column d. The maintenance supervisor reviews the faults corrected and those still not fixed to decide what other action is needed. For quality control, the inspector or a designated representative checks all corrected status symbol X faults. The inspector then initials the status symbol.

Q: What form is used for recording faults?

A: DA Form 2404.

REF: DA Form 750-8 and TM 9-1005-201-10.

Q: What is NMC?

A: Non Mission Capable.

REF: DA Form 2404.

SLIDE 13 OFF:

SECTION IV. SUMMARY

Method of Instruction: Reflective Discussion

Instr Type(I:S Ratio): Military - ICH (1:30) Time of Instruction: 15 mins

Check on Learning Determine if the students have learned the material presented by soliciting student questions and explanations. Ask the students questions and correct misunderstandings.

Question: What is the SMR Code for Part Number 9348220?

Answer: PAFZZ.

Question: What is the first step before disassembling a weapon?

Answer: Clear the weapon.

Question: What chapter in TM 9-1005-201-23&P covers field maintenance instructions?

Answer: Chapter 2.

Question: Which TM covers function checks?

Answer: TM 9-1005-201-10.

Review/ Summary

During this lesson, we discussed the following areas:

a. Identified the characteristics, capabilities and features, and major components of the M249.

b. Unloaded and cleared the M249.

c. Disassembled and troubleshot the M249.

d. Reassembled the M249.

e. Performed a Function Check.

f. Perform preventive maintenance on the M249 Machine Gun.

SECTION V. STUDENT EVALUATION

Testing

Feedback

The student will be evaluated on disassembly/assembly procedures and conducting field maintenance on a GO/NO-GO basis. Student must receive a GO to be successful.

NOTE: Feedback is essential to improving training, always encourage students to provide comments and ensure to complete the Module AAR.

NOTE: Review the completed practical exercise with the students. Ensure lesson is understood by asking questions and receiving feedback from the students. Clear up any misunderstandings.

A-1

Appendix A - Viewgraph Masters

Perform Field Maintenance on Machine Gun, 5.56mm, M249

101-UAC03C04 / Version 01.0 ©

Sequence Media Name Media Type

B-1

Appendix B - Assessment Statement and Assessment Plan

Assessment Statement: None.

Assessment Plan: None.

C-1

Appendix C - Practical Exercises and Solutions

PRACTICAL EXERCISE(S)/SOLUTION(S) FOR LESSON 101-UAC03C04 Version 01.0 ©

D-1

Appendix D - Student Handouts

Perform Field Maintenance on Machine Gun, 5.56mm, M249

101-UAC03C04 / Version 01.0 ©

Sequence Media Name Media Type 2 Machine Gun 5.56mm M249 PE DOCX 3 Machine Gun 5.56mm M249 PE SOLUTION DOCX

CRM LESSON PLAN REPORT
This lesson introduces the newly designated unit armorer on how to perform Field Maintenance on the M249 Saw. The expected learning outcomes is for the student to be able to perform Field Maintenance on the M249 Saw in accordance with TM 9-1005-201-10...
SECTION I. ADMINISTRATIVE DATA
ARMY LEARNING MODEL
OE INTEGRATION
SECTION II. INTRODUCTION
SECTION III. PRESENTATION
SLIDE 3 ON:
SLIDE 3 OFF:
REF: TM 9-1005-201-10.
REF: TM 9-1005-201-10. WP 0002-3
SLIDE 4 OFF:
SLIDE 5 ON:
SLIDE 5 OFF:
REF: TM 9-1005-201-10. WP 0005-1
REF: TM 9-1005-201-10. WP 0005-5
SLIDE 6 OFF:
REF: TM 9-1005-201-10. WP 0006-2
REF: TM 9-1005-201-10. WP 0006-5
SLIDE 9 OFF:
SLIDE 10 ON:
REF: TM 9-1005-201-10. WP 0006-9
REF: TM 9-1005-201-10. WP 0006-14
SLIDE 10 OFF:
SLIDE 11 ON:
SLIDE 12 ON:
REF: TM 9-1005-201-10. WP 0007-1
REF: TM 9-1005-201-10. WP 0007-1
SLIDE 12 OFF:
SLIDE 13 ON:
PREVENTIVE MAINTENANCE PROCEDURES
INSPECTION
EXPLANATION OF COLUMNS
END OF WORK PACKAGE
graphic not found for sequence #:4
SLIDE 16 OFF:
SECTION IV. SUMMARY
SECTION V. STUDENT EVALUATION

File details come from the government source that posted it. Updated .