101-UAC03B00v_01_0 PREPARE ARMY MAINTENANCE FORMS.pdf
PDF 358 KB Posted
- Attached to
- Small Arms Maintenance (SAM 31)
- Solicitation number
- W912PB-27-Q-A004
About this file
This document is a Curriculum Requirement Maintenance (CRM) Lesson Plan for military training on preparing Army Maintenance System forms. The lesson, numbered 101-UAC03B00 Version 01.0, was approved and became effective on 12 August 2025 and is classified as Unclassified (U).
The lesson introduces newly designated unit armorers to preparing Army Maintenance System forms in accordance with AR 750-1, PAM 750-8, TM 9-1005-317-10, TM 9-1005-317-23&P, and the ARIMS User Guide. The terminal learning objective requires students to prepare required Army Maintenance System forms in a classroom setting with computer systems and forms programs, achieving 100% accuracy. The lesson supports the Army Learning Area of professional competence and General Learning Outcome 14 regarding technical and tactical competence. Total instructional time comprises 8 hours and 25 minutes of academic resident hours plus 25 minutes of instructor action hours, delivered through discussion, demonstration, and reflective discussion methods with a 1:30 instructor-to-student ratio for most activities. Five learning steps address: (1) processing Army Maintenance System levels of maintenance; (2) demonstrating Technical Manual usage; (3) preparing DD Form 314; (4) preparing DA Form 2404 or DA Form 5988-E; and (5) preparing DA Form 5990-E or DA Form 2407. The lesson includes practical exercises using the M17/M9 Pistol as example equipment and requires students to achieve a minimum score of 80% on an examination administered during Lesson 101-92Y10D03 for successful completion. The training product has FD3 foreign disclosure restrictions and cannot be used to instruct international military students. Distribution is authorized only to U.S. Government agencies and their contractors.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
CRM LESSON PLAN REPORT
PREPARE ARMY MAINTENANCE FORMS
101-UAC03B00 / 01.0 ©
Approved 12 Aug 2025
Effective Date: 12 Aug 2025
SCOPE:
This lesson introduces the newly designated unit armorer on how to prepare Army Maintenance System forms. The expected learning outcomes is for the student to be able to prepare the Army Maintenance System forms in accordance with AR 750-1, PAM 750-8, TM 9-1005-317-10, TM 9- 1005-317-23&P and ARIMS User Guide. This lesson supports the Army Learning Area (ALA) of professional competence, and General Learning Outcome (GLO) 14, Soldiers and Civilians are technically and tactically competent. The goal of this lesson is to provide the Student with the knowledge and skills to prepare the Army Maintenance System forms without supervision and to the standards outlined in AR 750-1, PAM 750-8, TM 9-1005-317-10, TM 9-1005-317-23&P and ARIMS User Guide.
Distribution Restriction: Distribution authorized to U.S. Government agencies and their contractors only Export control restrictions. This determination was made on 14 June 2014. Insert Robins
AFB, GA 310098
Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of the document Foreign Disclosure: FD3 - This training product has been reviewed by the developers in coordination with the Unit Armor foreign disclosure officer. This training product cannot be used to instruct international military students.
SECTION I. ADMINISTRATIVE DATA
All Course Masters/POIs Including This Lesson
Courses
Course Number
None
POIs
Version Title Phase Status
Task(s) Taught(*) or Supported
Reinforced Task(s)
Knowledge
Skill
Administrative/ Academic Hours
Instructor Action
Test Lesson(s)
Prerequisite Lesson(s)
Training Material Classification
POI Number Version Title Phase Status
Task Number
Task Title
Status
Task Number
Task Title
Status
Knowledge Id
Title
Taught
Required
101-K-W10001 Knowledge of The Army Maintenance Management System (TAMMS) and Preventive Maintenance Checks and Service (PMCS)
Yes No
Skill Id
Taught
551-S-0054 Ability to identify faults or deficiencies during a maintenance inspection
Yes No
The administrative/academic (50 min) hours required to teach this lesson are as follows:
Academic Resident Hours / Methods
Yes Yes Yes
4 hrs 0 hrs 3 hrs
15 mins 10 mins 25 mins
Discussion (Small or Large Group) Reflective Discussion Demonstration
Total Hours(50 min): 8 hrs 0 mins
The instructor action (60 min) hours required to teach this lesson are as follows:
Hours/Actions
0 hrs 25 mins Classroom Breakdown
Total Hours (60 min): 0 hrs 25 mins
Lesson Number Version
Lesson Title
Lesson Number Version
Lesson Title
Security Level: This course/lesson will present information that has a Security Classification of: U - Unclassified.
Foreign Disclosure Restrictions
References
FD3. This training product has been reviewed by the developers in coordination with the Unit Armor foreign disclosure officer. This training product cannot be used to instruct international military students.
Student Study Assignment
Instructor Requirements
Support Personnel
Additional Support Personnel Requirements
None
Primary Instructor and Assistant Instructor(s).
Armorer Computer System Analyst
Student
Man
Equipment for Instruction
Materials Required Instructor Materials:
1. Lesson Plan.
2. Practical Exercise (PE).
3. Practical Exercise Solution.
4. Student Handout.
Number
Date
AR 750-1 Army Materiel Maintenance Policy 02 Feb 2023 ARIMS User Guide Army Records Information Management System
(ARIMS) User Guide 04 Aug 2022
PAM 750-8 The Army Maintenance Management System (TAMMS) Users Manual.
22 Aug 2005
TM 9-1005-470-10 OPERATOR MANUAL FOR MODULAR HANDGUN
SYSTEM (MHS) PISTOL, 9MM, SEMIAUTOMATIC
M17 (NSN 1005-01-661-7317) (EIC 2VN) PISTOL,
9MM, SEMIAUTOMATIC M18 (NSN 1005-01-661-
7323) (EIC 2VP) PISTOL, 9MM, SEMIAUTOMATIC
GO (NSN 1005-01-661-7309) (EIC 2VO)
31 Mar 2019
Name Ratio Qty Hours
Armorer 0:0 1 0.5 Remarks:
Computer System Analyst 0:0 1 6.0 Remarks:
ID - Name Student Instructor
Ratio Ratio Spt Qty Exp
1005-01-661-7317 - Handgun System, 0:0 0:0 No 0 No Modular: XM17
Remarks:
7021-01-C14-3190 - Computer, Micro 0:0 0:0 No 2 No Lap-Top Portable AC: M4500 Dell
Remarks:
7021-01-D01-0269 - PC Tablet, Data 1:1 0:0 No 1 No Entry: IPAD 2 WIFI 64GB Apple
Remarks:
7025-01-C11-4208 - Printer, Daisy 0:0 0:0 No 1 No Wheel/Dot Matrix/:2335DN MFP Dell
Remarks:
7050-01-C14-4309 - Interactive Pen 0:0 0:0 No 1 No Display: ID422W Smart
Remarks:
7490-01-T00-0291 - Card 1:1 0:0 No 0 No Programmer: RFC-03G Turning
Technologies
Remarks:
7490-01-T00-0292 - Card 1:30 0:0 No 0 No Programmer: XRC-R02 Turning
Technologies
(Note: Asterisk before ID indicates a TADSS.)
Classroom, Training Area, and Range
Ammunition Requirements DODIC - Name Exp
Student
Ratio
Instruct
Ratio
Spt Qty
Instructional Guidance/ Conduct of Lesson
Proponent Lesson Plan Approvals
NOTE: Before presenting this lesson, instructors must thoroughly prepare by studying this lesson and identified reference material.
NOTE: Instructor/Facilitator will ensure to incorporate OE experiences.
ARMY LEARNING MODEL
All instructors/Facilitators will facilitate training under Army Learning Model, ensuring training is based on quality, relevance and effectiveness of face to face learning experiences through outcome-oriented instructional strategies. This type of instruction will foster critical thinking, initiative and operational relevance in context.
OE INTEGRATION
Instructors/Facilitators will facilitate conversations from students and relate this lesson to current Operational Environments (OE) using personal experiences and/or examples obtained from the Center for Army Lessons Learned (CALL). Instructors should provide sufficient OE variables and scenarios to produce the desired soldier training outcome for this lesson.
NOTE: Verify that the training material is loaded on the computers before beginning the lesson.
Name Rank Position Date michelle.r.brown8.civ Not available Approver 12 Aug 2025
Student Materials:
1. Pen or Pencil
2. Practical Exercise
3. Paper
4. Student Handout.
ID - Name Quantity Student Ratio
Setup Mins
Cleanup Mins
17135-3000 Laboratory Instructional Building, 3000 Square Foot
1:30 20 30
SECTION II. INTRODUCTION
Method of Instruction: Discussion (Small or Large Group) Mode of Delivery: Resident Instruction
Instr Type (I:S Ratio): Military - ICH (1:30) Time of Instruction: 15 mins
Motivator SLIDE 92Y10D02-1 (ON)
As the unit armorer, you will be responsible for the operational readiness of your unit's weapons. It is important that you have a basic understanding of the Army Maintenance System and how that system will help you in your readiness responsibilities. You need to know how to use equipment technical manuals. You need to know, recognize, and understand maintenance forms; what they are, how to use them and finally, how they help carry out your readiness responsibilities.
Introduce the "Understand the Army Maintenance System." lesson to the students.
SLIDE 92Y10D02-1 (OFF)
SLIDE 92Y10D02-2 (ON)
INSTRCTOR NOTE: Review the lesson objectives with the students.
SLIDE 92Y10D02-2 (OFF)
Terminal Learning Objective
Safety
NOTE. Inform the students of the following Terminal Learning Objective requirements.
At the completion of this lesson, you [the student] will:
Action: Prepare Army Maintenance Forms Conditions:
In a classroom, given a computer system with forms programs, student handouts, DA PAM
750-8, AR 750-1, pens, pencils, and practical exercise (PE).
Standards:
Prepare required Army Maintenance System forms in accordance with the steps listed in DA
Pam 750-8 with 100% accuracy.
Learning Domain - Level: Cognitive - Understanding
No JPME Learning Areas Supported: Supports GLO 10 & 11
General classroom safety and electrical equipment safety procedures will be followed.
Warning: Do not place electrical equipment directly on wet ground, snow or ice for operation.
Electrocution can result if the equipment is operated without proper grounding. Before connecting the equipment to a power source, verify that all switches are in the off position. Equipment uses power line voltage. Serious injury or death may occur on contact. Observe all safety precautions when connecting power cables or performing
Risk Assessment Level maintenance.
Low - Tripping Assessment: Caused by loose wires or liquids.
Controls: Ensure wires are properly secured; no food or drink in classroom or near equipment.
Leader Actions: Supervise and ensure guidance is followed by the students.
Environmental Considerations
Instructional Lead-in
NOTE: Instructor should conduct a risk assessment to include environmental considerations IAW the current environmental considerations publication, and ensure students are briefed on hazards and control measures.
NOTE: It is the responsibility of all Soldiers, DA Civilians, and Contractors to protect the environment.
During this lesson, you will receive training on what the Army maintenance system is, how it applies to your unit/organization, and the manuals and forms you will use to carry out your maintenance responsibilities.
SECTION III. PRESENTATION
TLO - LSA 1. Learning Step / Activity TLO - LSA 1. Process the Army Maintenance System levels of maintenance
Instr Type (I:S Ratio): Military - ICH (1:15)*
Time of Instruction: 2 hrs Media Type: PowerPoint Presentation
Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security
Classification of: U - Unclassified.
Note: Marked as (*) is derived from the parent learning object
INSTRUCTOR NOTE: Refer students to AR 750-1, Chapter 3-1.
a. Overview. (Ref: AR 750-1, Para 3-1)
1) Army maintenance will preserve the required performance capabilities of Army materiel or return those assets to their baseline performance capabilities.
2) Army maintenance will follow the principle that the useful service life of Army equipment is achieved when the item is operated within its intended purpose and is maintained in accordance with its designed or engineered specifications. When an equipment item reaches its useful service life the Army will use acquisition, recapitalization, rebuild, or overhaul statement of work to replace or extend the equipment service life.
3) The Army will use four core maintenance processes to manage equipment during its useful service life:
performance observation, equipment services, fault repair, and single standard repair. These processes are defined in AR 750-1 & DA Pam 750 – 1.
NOTE: Instructor will refer to the publication Glossary and review the maintenance processes.
SLIDE 3 (OFF)
SLIDE 4 (ON)
b. The Army maintenance standard (Ref: AR 750-1, Para 3-3)
1) The Army has one maintenance standard. This mandatory standard is defined by the TM – 10 series and TM – 20 series, and/or in the appropriate or applied technical data plans.
2) Army equipment meets the maintenance standard when the following conditions exist:
a) The equipment is fully mission capable (FMC).
b) All faults are identified following prescribed intervals using the “items to be checked” column of the applicable TM – 10 series and TM – 20 series PMCS tables. Aviation faults are determined by using the air-craft preventive maintenance inspection and service in accordance with TM 1 – 1500 – 328 – 23.
c) All repairs, services, and other related work that will correct field-level equipment and/or materiel faults for which the required parts and/or supplies are available have been completed in accordance with DA Pam 738
– 751 or DA Pam 750 – 8.
d) Parts and supplies required to complete the corrective actions, but which are not available in the unit, are on a valid funded requisition in accordance with AR 710 – 2.
e) Corrective actions that are not authorized at field level by the applicable TM’s MAC must be evacuated to the next higher level (sustainment) and use appropriate turn-in documentation as specified in AR 710 – 2 and DA Pam 710 – 2 – 1 for turn-in to supply.
f) Scheduled services are performed at the service interval required by the applicable TM or approved
NCOMP. Units are authorized a 10 percent variance when performing scheduled services because of competing mission requirements. Procedures to apply this variance are found in DA Pam 750 – 8 for ground equipment and TM 1 – 1500 – 328 – 23 for aviation equipment. Afloat equipment is excluded from this variance requirement and maintained as instructed by TM 38 – 470.
g) All routine, urgent, and emergency MWOs are applied to equipment and reported in the MMIS in accordance with AR 750 – 10 and closed out in GCSS–Army. In addition, actions required by one-time
SOUMs and emergency safety of flight messages are completed in accordance with AR 750 – 6 and AR 95
– 1.
h) All authorized BII and COEI are present and serviceable or on a valid supply request. For aircraft, all authorized flyaway items and items listed on the aircraft inventory master guide are present and serviceable or on a valid supply request.
3) All maintenance advisory messages and maintenance information messages providing directives for weapon system software updates are applied to equipment and reported in the MMIS in accordance with AR
750 – 10.
c. The Army maintenance standard applies to all equipment except:
1) Equipment used as training aids that require frequent disassembly and assembly.
2) Equipment used in research, development, testing and evaluation.
d. Proper use, care, handling, and conservation of materiel in accordance with applicable technical publication are mandatory.
SLIDE 4 (OFF)
SLIDE 5 (ON)
c. The Army Maintenance system components. (Ref: AR 750-1, Para 3-9).
1) The Army maintenance system will consist of two levels: field maintenance and sustainment maintenance
(see DA Pam 750 – 1).
a) Field maintenance, also known as on-system maintenance, repairs and returns equipment to the operator or the user.
b) Sustainment maintenance, also known as off-system maintenance, primarily repairs and returns equipment and components to the supply system.
SLIDE 5 (OFF)
SLIDE 6 (ON)
d. Field maintenance. (Ref: AR 750-1, Para 3-10)
1) The fundamental element of field maintenance is the requirement for PMCS. See DA Pam 750 – 1 for the characteristics of field maintenance.
2) Operator and/or crew maintenance is the foundation of Army maintenance and requires continuous emphasis from all commanders and leaders. Operator and crew proficiency are critical to readiness and must be made a priority by leaders at all levels.
a) Commanders must establish a command climate that ensures assigned equipment is maintained to the maintenance standard defined in paragraph 3 – 3 and DA Pam 750 – 1 and are responsible for providing resources, assigning responsibility, and training Soldiers to achieve this standard.
b) Operator and/or crew performing PMCS from the applicable TM – 10 series is the cornerstone of the Army maintenance system. NCOs are responsible for ensuring operator and crew proficiency in the use and care of their assigned equipment. Commanders must provide and protect adequate time for NCOs to train and achieve required levels of proficiency.
(1) Deficiencies detected during the before operations portion of the PMCS which render the equipment
NMC per the Technical Manual or violate a safety directive must be corrected before the mission.
(2) Deficiencies detected during the mission affecting FMC must be corrected during the mission.
SLIDE 6 (OFF)
SLIDE 7 (ON)
e. Sustainment Maintenance (Ref: AR 750-1, Para 3-11). Sustainment maintenance is the second function of the Army maintenance system. Sustainment maintenance is characterized by the performance of maintenance tasks, “off system” in a secure environment using trained personnel, tools, and TMDE.
Sustainment maintenance is typically repair and return to stock and depot-maintenance operations. See DA
Pam 750 – 1 for more information about sustainment maintenance.
SLIDE 7 (OFF)
SLIDE 8 (ON)
Check on Learning:
SLIDE 8 ON
Question: What is the first function of the Army Maintenance System?
Answer: Field Maintenance. (AR 750-1, Para 3-10)
Question: What is the foundation of the Army Maintenance System?
Answer: Performance Observation. (AR 750-1, GLOSSARY)
SLIDE 8 OFF
Review Summary:
Conduct a Review/Summary of the information presented in the Learning Step.
Process the Army Maintenance System levels of maintenance
TLO - LSA 2. Learning Step / Activity TLO - LSA 2. Demonstrate how to use a Technical Manual (TM)
Instr Type (I:S Ratio): Military - ICH (1:15)*
Time of Instruction: 2 hrs Media Type: PowerPoint Presentation
Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security
SLIDE 9 (ON)
a. The Army Technical Manual (TM). – The technical manual contains information for safe and efficient operation of equipment. It provides general knowledge of the equipment, its characteristics and operation procedures. The manual also contains troubleshooting procedures to assist in keeping the equipment operating properly.
INSTRUCTOR NOTE: Direct the students attention to the student handout which depicts the conversion from four level maintenance to two level maintenance. The instructor must articulate the possible differences contained in regulatory guidance related to the terms and maintenance levels as some TMs and/or regulatory guidance may not have been updated to reflect the Army's current two-level maintenance policy.
1) The 10 series Technical Manual identifies operator/crew PMCS which is in the category of field level maintenance.
2) The 20 series Technical Manual identifies unit maintenance PMCS which is in the category of field level maintenance.
INSTRUCTOR NOTE: For the designation 23&P, indicates this Technical Manual ™ is applicable to maintenance at the field level. The “P” indicates that repair parts are also included in the Technical Manual.
Some TMs may also include special tool listings.
INSTRUCTOR NOTE: Use the computer to open TM 9-1005-470-23&P. Display TM on screen using projector in classroom as it is discussed. Have students follow along with their TM.
INSTRUCTOR NOTE: Refer students to TM 9-1005-470-23&P, Page vii.
SLIDE 9 (OFF)
SLIDE 10 (ON)
b. How to use this manual
1) GENERAL: In order to use this manual efficiently, there are several things you need to know.
a) All references in the manual are to work packages or to another manual.
b) Whenever the male gender is mentioned in the technical manual, it also pertains to the female gender.
c) Procedures apply to all models unless otherwise noted.
2) INDEXES: The manual is organized to help you quickly find the information you need. There are several useful indexes.
a) Table of Contents. Lists in order all chapters, work packages, and appendixes. The table of contents lists all work packages, figures, and tables with page references.
b) Nomenclature Cross-Reference List. Gives an alphabetical list of the common names that are substituted for the official nomenclature in the manual.
c) Chapter Overviews. Summarizes material covered in the chapter.
d) Troubleshooting Symptom Index. Lists in alphabetical order parts of the weapon with possible malfunctions. References work package pages of the troubleshooting table
e) Alphabetical Index. Located at the end of the manual. An extensive subject index for everything in the manual. It gives work package reference.
3) Maintenance Procedures: There are two maintenance chapters, one for unit and one for direct support, both are the responsibility of field level maintainers. Each has an initial setup containing a list of the following things you will need in order to do your maintenance task.
a) Tools and Special Tools. List tool kit and tools not found in your tool kit.
b) Materials/Parts. Lists expendable/durable materials and 100% replaceable parts. A part number or work package references follows each material or part. If more than one part is needed, the quantity needed will follow the part number or reference.
c) References. List other publications containing necessary information.
d) Equipment Condition. Lists conditions to be met before starting a procedure. The reference following the condition is the work package reference to instructions for setting up the condition.
e) Maintenance Procedures. Step-by-step illustrated procedures for maintenance authorized by the
Maintenance Allocation Chart (MAC), WP 0022-1/blank.
INSTRUCTOR NOTE: Review the Technical Manual with the students.
c. COVER: Discuss the cover
d. WARNING SUMMARY.
e. TABLE OF CONTENTS.
f. CHAPTER 3 – MAINTENANCE INSTRUCTIONS
1) WP 0006.1-1 - Service upon receipt of material.
2) WP 0006-1 - Unit Maintenance (Field Maintenance)- Troubleshooting Procedures. This work package contains troubleshooting information for locating and correcting most of the operating troubles that may develop. Each malfunction for a part, assembly, or subassembly is followed by a list of tests or inspections that will help you determine corrective actions to take. You should perform the tests/inspections and corrective actions in the order listed.
INSTRUCTOR NOTE: Walk student through a troubleshooting procedure.
3) WP 0007-1 - Unit maintenance (Field Maintenance) – Preventive Maintenance Checks and Services
(PMCS).
a) Perform PMCS every 90 days to keep the weapon ready for use.
b) If the weapon has not been used for 90 days, PMCS in the operator’s manual (TM 9-1005-470- 10) should be performed.
c) If you see rust or other signs of wear on a weapon, PMCS must be done immediately.
d) The PMCS procedures are arranged in logical sequence requiring a minimum amount of time and effort on the part of the person(s) performing them. They are arranged so there will be minimum interference between person(s) performing checks simultaneously on the same end item.
e) Inspect all assemblies for missing broken or loose parts. Inspect parts for cracks, dents, burrs, excessive wear, rust or corrosion. Make sure all parts are cleaned and lubricated.
f) Do not use cleaning solvents or lubricants on any composite/rubber components.
g) Inspect external surfaces for adequate finish. Refinish if necessary using solid film lubricant.
h) Repair or replace authorized defective parts or notify sustainment maintenance if repair or replacement is not authorized.
i) If the M17 Pistols Receiver Assembly is missing one third or more of its exterior protective finish, resulting in an unprotected/light-reflecting surface it is a candidate for overhaul. The missing finish will be considered a shortcoming. This shortcoming requires action to obtain a replacement weapon. Once a replacement has been received, evacuate the original weapon to depot for overhaul.
j) Interval: Designated timeframes listed in the INTERVAL column are:
(1) B-Before. Checks and services performed prior to the equipment leaving its containment area or performing its intended mission.
(2) D-During. Checks begin when the equipment is being used in its intended mission.
(3) A-After. Checks and services begin when the equipment is taken out of its mission mode or returned to its containment area.
INSTRUCTOR NOTE: Demonstrate how to read and understand the PMCS table by conducting the PMCS with the students.
4) WP 0007 - Unit Maintenance (Field Level) Procedures – General Information.
g. CHAPTER 5 – SUPPORTING INFORMATION
1) WP 0020-1 - References. This work package lists all forms, field manuals, technical manuals, tables, regulations, standards, and miscellaneous publications references used in the manual.
2) WP 0022-1 - Maintenance Allocation Chart (MAC).
INSTRUCTOR NOTE: The instructor must articulate the possible differences contained in regulatory guidance related to the terms, maintenance level and maintenance allocation charts as some TMs and/or regulatory guidance may not have been updated to reflect the Army's current two level maintenance policy.
a) INTRODUCTION.
(1) The MAC designates overall authority and responsibility for the performance of maintenance functions on the identified end item or component. The application of the maintenance functions to the end item or component shall be consistent with the capacities and capabilities of the designated maintenance levels, which are shown on the MAC in column (4) as:
(a) Crew/operator (Field) – includes two sub-columns, C (crew/operator) and O (unit) maintenance.
(b) Maintainer Maintenance (Field) – includes an F sub-column.
(c) Below depot sustainment (Sustainment) – includes and H sub-column.
(d) Depot (Sustainment) – includes a D sub-column.
(2) The tools and test equipment requirements list the tools and test equipment (both special tools and common tool sets) required for each maintenance function as referenced from the MAC.
(3) The remarks (immediately following the tools and test equipment requirements) contain supplemental instructions and explanatory notes for a particular maintenance function.
b) MAINTENANCE FUNCTIONS (Tasks) - Maintenance functions are limited to and defined as follows:
(1) Inspect. Step-by-step instructions to determine the serviceability of an item by comparing its physical, mechanical, and/or electrical characteristics with established standards through examination (e.g.
by sight, sound, or feel).
(2) Replace. Step-by-Step instructions for taking off an unserviceable component and putting a serviceable component in its place. The replace task is authorized by the LPD/MAC and the assigned maintenance level is shown as the third position code of the SMR code.
(3) Repair. Step-by-step instructions for restoring an item or software to a completely serviceable or fully mission capable status. The repair task is authorized by the LPD/MAC and the assigned maintenance level is shown as the fourth position of the SMR code. The following definitions are applicable to the “repair” maintenance task: welding, grinding, riveting, straightening, facing, machining, and/or resurfacing.
c) EXPLANATION OF COLUMNS in the MAC
(1) Column (1)-Group Number. Column (1) lists FGC numbers, the purpose of which is to identify maintenance significant components, assemblies, subassemblies, and modules with the Next Higher
Assembly (NHA).
(2) Column (2)-Component/Assembly. Column (2) contains the item names of components, assemblies, subassemblies, and modules for which maintenance is authorized.
(3) Column (3)-Maintenance Function. Column (3) lists the functions to be performed on the item listed in column (2).
(4) Column (4)-Maintenance Level. Column (4) specifies each level of maintenance authorized to perform each function listed in column (3), by indicating man-hours required in the appropriate sub-column. This man hour figure is the task time multiplied by the number of maintainers required to perform that maintenance task. This time includes preparation (equipment conditions, inspections), tasks, performance, follow-on maintenance and quality assurance (inspections) time. Crew maintenance time will be entered as task (clock) time only. If different maintenance classes perform the same maintenance functions due to the number or complexity of the tasks, appropriate manhour figures are to be shown for each class. The symbol designations for the various maintenance levels and classes are as follows:
Field:
C – Crew Maintenance.
F – Maintainer Maintenance.
Sustainment:
H – Below Depot Maintenance
D – Depot Maintenance
(5) Column (5) – Tools and Equipment Reference Code. Column (5) specifies by code, those common tool sets (not individual tools), common Test, Measurement and Diagnostic Equipment (TMDE), and special tools, special TMDE and special support equipment required to perform the designated function. Codes are keyed to the entries in the tools and test equipment table.
(6) Column (6) – Remarks Code. When applicable, this column contains a letter code in alphabetical order which is keyed to the remarks table entries.
d) EXPLANATION OF COLUMNS in the Tools and Test Equipment Requirements.
(1) Column (1) – Tools or Test Equipment Reference Code. The tool or test equipment reference code correlates with a code used in column (5) of the MAC.
(2) Column (2) – Maintenance Level. The lowest level maintenance authorized to use the tool or test equipment.
(3) Column (3) – Nomenclature. Name or identification of the tool or test equipment.
(4) Column (4) – National Stock Number (NSN). The NSN of the tool or test equipment.
(5) Column (5) – Tool Number. The manufacture’s part number
3) WP 0015-1 - Repair Parts and Special Tools List (RPSTL) Introduction
a) SCOPE. The Repair Parts and Special Tools List (RPSTL) lists the authorized spare and repair parts;
special tools; special test, measurement and diagnostic equipment (TMDE); and other special support equipment required for performance of Maintainer maintenance of the MHS. It authorizes the requisitioning, issue, and disposition of spares, repair parts, and special tools as indicated by the source, maintenance, and recoverability (SMR) Codes.
b) GENERAL. In addition to the Introduction work package, the RPSTL is divided into the following work packages.
(1) Repair Parts List Work Packages. Work packages containing lists of spare and repair parts authorized for use in the performance of maintenance at the levels determined by the MAC/SMR code. These work packages also include parts which must be removed for replacement of authorized parts. Parts lists are composed of functional groups in ascending alphanumeric sequence, with the parts in each group listed in ascending figure and item number sequence. Sending units, brackets, filters and bolts are listed with the component they mount on. Items listed are shown on the associated illustrations.
(2) Special Tools List Work Packages. Work package lists those special tools, special TMDE, and special support equipment authorized by the RPSTL (as indicated by Basis of Issue (BOI) information in the
DESCRIPTION AND USABLE ON CODE (UOC) column). Tools that are components of common tool sets and/or Class VII are not listed.
(3) Cross-Reference Indexes Work Packages. There are two cross-reference indexes work packages in this
RPSTL. The National Stock Number Index work package refers you to the figure and item number for each
NSN listed in the RPSTL. The Part Number Index work package refers you to the figure and item number for each part listed in the RPSTL.
c) EXPLANATION OF COLUMNS in the Repair Parts List and Special Tools List Work Packages.
(1) ITEM NO. (Column (1)). Indicates the number used to identify items called out in the illustration.
(2) SMR CODE (Column (2)). The SMR code containing supply/requisitioning information, maintenance level authorization criteria, and disposition instruction in accordance with AR 700-82, as shown in the following breakout.
(a) Source Code. 1st two positions: How to get an item.
(01) Source Codes PA, PB, PC, PD, PE, PF, PG, PH, PR, and PZ – Stock items, use the applicable NSN to requisition/request items with these source codes. They are authorized to the level indicated by the code entered in the third position of the SMR code.
NOTE: Items coded PC are subject to deterioration. Items coded PR and PZ are obsolete.
(02) Source Codes KD, KF, and KB – Items with these codes are not to be requested/requisitioned individually. They are part of a kit that is authorized to the maintenance level indicated in the third position of the SMR code. The complete kit must be requisitioned and applied.
(03) Source Codes MF, MH, ML and MD – Items with these codes are not to be requested/requisitioned individually. They must be made from bulk material, which is identified by the P/N in the DESCRIPTION AND
USABLE ON CODE (UOC) entry and listed in the bulk material group work package. If the item is authorized to you by the third position code of the SMR code, but the source code indicates it is made at a higher level, order the item from the higher level of maintenance.
(04) Source Codes AF, AH, AL, and AD – Items with these codes are not to be requested/requisitioned individually. The parts that make up the assembled item must be requisitioned or fabricated and assembled at the level of maintenance indicated by the source code. If the third position of the SMR code authorizes you to replace the item, but the source code indicates the item is assembled at a higher level, order the item from the higher level of maintenance.
(05) Source Code XA – Do not requisition an “XA” coded item. Order the next higher assembly.
NOTE: Cannibalization or controlled exchange, when authorized, may be used as a source of supply for items with the above source codes except for those items source coded “XA” or those aircraft support items restricted by requirements of AR 750-1.
(06) Source Code XB – If an item is not available from salvage, order it using the CAGEN and P/N.
(07) Source Code XC – Installation drawings, diagrams, instruction sheets, field service drawings; identified by manufacturer’s P/N
(08) Source Code XD – Item is not stocked. Order and XD-coded item through local purchase or normal supply channels using the CAGEC and P/N given, if no NSN available.
(b) Maintenance Code. Maintenance codes tell you the level(s) of maintenance authorized to use and repair support items. The maintenance codes are entered in the third and fourth positions of the SMR code as follows:
(01) 3rd position: The maintenance code entered in the third position tells you the lowest maintenance level authorized to remove, replace, and use an item. The maintenance code entered in the third position will indicate authorization to the following levels of maintenance:
*C – Crew
*F – Maintainer maintenance can remove, replace, and use the item.
*H – Below Depot Sustainment maintenance can remove, replace, and use the item.
*L – Specialized repair activity can remove, replace, and use the item
*G – Afloat and ashore intermediate maintenance can remove, replace, and use the item (Navy O*K –
Contractor facility can remove, replace, and use the item
*Z – Item is not authorized to be removed, replace, or used at any maintenance level
*D – Depot can remove, replace, and use the item.
(02) 4th position: The maintenance code entered in the fourth position tells you whether or not the item is to be repaired and identifies the lowest maintenance level with the capability to do complete repair (perform all authorized repair functions).
*C – Crew (operator) is the lowest class that can do complete repair.
*F – Maintainer is the lowest class that can do complete repair of the item.
*H – Below Depot Sustainment is the lowest class that can do complete repair of the item.
*L – Specialized repair activity is the lowest class that can do complete repair of the item.
*D – Depot is the lowest class that can do complete repair of the item.
*G – Both afloat and ashore intermediate levels are capable of complete repair of item (Navy only)
*K – Complete repair is done at contractor facility.
*Z – Nonreparable. No repair is authorized.
*B – No repair is authorized. No parts or special tools are authorized for maintenance or “B” coded item.
However, the item may be reconditioned by adjusting, lubricating, etc., at the user level.
(c) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is shown in the fifth position of the SMR code as follows:
(01) Recoverability Code C – Reparable item. When uneconomically reparable, condemn and dispose of the item at the crew/operator level.
(02) Recoverability Code Z – Non-reparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in the third position of the SMR code.
(03) Recoverability Code F – Reparable item. When uneconomically reparable, condemn and dispose of the item at the field level.
(04) Recoverability Code H – Reparable item. When uneconomically reparable, condemn and dispose of the item at the below depot sustainment.
(05) Recoverability Code D – Reparable item. When beyond lower-level repair capability, return to depot.
Condemnation and disposal of item are not authorized below depot.
(06) Recoverability Code L – Reparable item. Condemnation and disposal of item are not authorized below
Specialized Repair Activity (SRA).
(07) Recoverability Code A – Item requires special handling or condemnation procedures because of specific reasons (such as precious metal content, high dollar value, critical material, or hazardous material).
Refer to appropriate manuals/directives for specific instructions.
(08) Recoverability Code G – Field level reparable item. Condemn and dispose at either afloat or ashore intermediate levels (Navy only).
(09) Recoverability Code K – Reparable item. Condemnation and disposal to be performed at contractor facility.
(3) NSN (Column (3)). The NSN for the item is listed in this column.
(4) CAGEC (Column (4)). The Commercial and Government Entity Code (CAGEC) is a five-digit code which is used to identify the manufacturer, distributor, or Government agency/activity that supplies the item.
(5) PART NUMBER (Column (5)). Indicates the primary number used by the manufacturer (individual company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications, standards, and inspection requirements to identify an item or range of items.
NOTE: When you use an NSN to requisition an item, the item you receive may have a different P/N from the number listed.
(6) DESCRIPTION AND USABLE ON CODE (UOC) (Column (6)). This column includes the following information:
(a) The federal item name, and when required, a minimum description to identify the item.
(b) P/N’s of any bulk materials required if the item is to be locally manufactured or fabricated.
(c) Hardness Critical Item (HCI). Items that require special handling or procedures to ensure protection against electromagnetic pulse (EMP) damage are marked with the letters HCI.
(d) Refer to Usable on Code details presented later in this work package under SPECIAL INFORMATION.
(e) Dot indentions indicate the relationship of the part (or parts) to its next higher assembly (NHA) in the tabular listing. The NHA for this part (or parts) is listed right before the part (or parts) that it is the NHA for. If the item is connected directly to (can be disassembled from) the item identified in the functional group code title for that specific tabular listing, it shall have one dot indentation. Otherwise, that item in the tabular list will not have a dot indentation.
(f) The statement END OF FIGURE appears below the last item description in column (6) for each Figure in the repair parts list, special tools repair parts, kits, bulk items, and special tools list work packages QTY
(Column (7)). The QTY (quantity per Figure) column indicates the quantity of the item used in the breakout shown on the illustration/Figure. A “V” appearing in this column instead of a quantity indicates that the quantity is variable and quantity may change from application to application.
INSTRUCTOR NOTE: End display of TM 9-1005-470-23&P. Return to PowerPoint presentation.
SLIDE 10 OFF:
Check on Learning: SLIDE 10 ON:
Question: What does TM stand for?
Answer: Technical Manual.
Question: What level does 23&P consist of ?
Answer: Field level.
SLIDE 10 OFF:
Review Summary:
Conduct a Review/Summary of the information presented in the Learning Step.
Demonstrate how to use a Technical Manual (TM)
TLO - LSA 3. Learning Step / Activity TLO - LSA 3. Prepare DD Form 314
Method of Instruction: Demonstration
Instr Type (I:S Ratio): Military - ICH (1:15)*
Time of Instruction: 1 hr Media Type: Handout / PowerPoint Presentation
Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security
SLIDE 11 (ON)
INSTRUCTOR NOTE: SLIDE 11 (ON)
INSTRUCTOR NOTE: Explain to the students that during the remainder of this lesson they will use the Pistol
Semi-Automatic M17 to perform inspections and for the equipment item on which to base the preparation of the maintenance forms.
INSTRUCTOR NOTE: Refer students to DA Pam 750-8, Para 3-9.
a. Understand the DD Form 314.
1) Purpose. The DD Form 314 is a record of scheduled and performed field maintenance including lubrication services, annual small arms weapons gauging, borescope and pullover gauging, and 180-day verification maintenance. It also records NMC maintenance (NMCM) and NMC supply (NMCS) time; except for missile system/missile subsystem and FAA flight check data of ATC navigational aids.
2) The GCSS-Army System has an automated preventive maintenance schedule listing AWCMF 452
Service Schedule in lieu of the DD Form 314. submit all serial numbers for the weapons to the maintenance section and post serial numbers to the GCSS-Army System.
SLIDE 11 (OFF)
SLIDE 12 (ON)
3) Use. The DD Form 314 is used for the following actions.
a) Schedule. Periodic services on equipment, to include components in a system or subsystem, are scheduled when the technical manual requires a PMCS service to be performed by field maintenance personnel. This form is also used to schedule the following services performed under the supervision of field maintenance personnel:
(1) All nonoperator services are scheduled one service in advance.
(2) The next scheduled due date may fall in the following year. In that case, enter the date, miles, and hours due in the Remarks block until a new DD Form 314 is started.
(3) Weekends and holidays may be blocked out. When these are blocked out, services are scheduled on the next working day.
(4) The following symbols are used to show the type of service scheduled:
(a) T - any test.
(b) I - any inspection.
(c) L - lubrication.
(d) R- recoil exercise.
(e) W - weekly service.
(f) M - monthly (1 month) service.
(g) Q - quarterly (3 month) service.
(h) S - semiannual (6 month) service.
(i) A - annual (1 year) (12 month) service.
(j) E - 18 month service.
(k) B - biennial (2 year) service.
(l) F - quadrennial (4 year) service.
(m) H - tire rotation/inspection.
(n) Z - oil sampling.
(5) The symbol L is used for all periodic lubes required by a lubrication order (LO). The interval block on an
LO only tells when to schedule the lubes. It does not tell what services to schedule or symbol to use.
(6) Other symbols or sub symbols may be used as long as they do not conflict with the symbols required by
DA Pam 750-8. Explain those symbols or sub symbols in the Remarks block of the DD Form 314 or in the unit SOP.
(7) To schedule a service, its symbol is written in pencil in the date due block with its miles, kilometers, or hours beside it. (Not all services will have miles, hours, or kilometer intervals).
(a) A service may not always be pulled when it is scheduled. So a 10 percent variance is provided before or after the scheduled day, miles, or hours. Within the variance, the service is treated as if it was done on the day/miles/hours scheduled.
(b) Some services cannot use the 10 percent variance because time is too critical. the TM PMCS table should always be checked before using the variance.
(c) When the service is within the variance, ink in the symbol with the equipment's miles, kilometers, or hours on the date it was scheduled. when a service outside the variance is completed, erase the scheduled symbol and data, and ink in the symbol with data on the actual day the service was completed. Schedule the next service from the new date.
(d) When the service exceeds the 10 percent variance, the equipment is administratively designated Not
Mission Capable (NMC) until the next service is completed.
b) Documentation. Show completed periodic services and lubes by inking in the symbol or symbols and miles or hours. DD Form 314s are tied to field-level services and their intervals. The number of DD Form
314s needed varies based on the equipment and how and where maintenance is pulled. Normally, one DD form 314 covers one piece of equipment. One DD Form 314 may cover several like items if the services are scheduled and pulled on the same date. Examples of like items are small arms. When scheduling services on more than one item, enter each item's serial number in the Remarks block.
SLIDE 12 (OFF)
SLIDE 13 (ON)
c) Reporting.
(1) The DD Form 314 is NOT USED for:
(a) Periodic services designated for the operator or crew.
(b) Showing oil samples taken.
(c) Training aids and devices (equipment used ONLY for training). Small arms/weapons must be classified as unusable per AR 190-11 before they can be considered training aids.
(d) Equipment provided with an automatic data processing (ADP) printout or automated forms that list DD
Form 314 data such as ULLS.
4) Disposition of the DD Form 314.
a) DD Form 314 is used for 1 year for equipment reported under AR 700-138. It can be used for 2 years on nonreportable equipment.
b) The completed form is destroyed after transferring needed information to a new form. transfer all information from these blocks:
(1) Registration number.
(2) Administration number.
(3) Nomenclature.
(4) Model.
(5) Assigned to.
(6) Remarks: NMCM/NMCS data for the current report; hour meter or odometer change information;
symbols; and any other needed maintenance data.
c) Any services needed should be scheduled in pencil.
d) The current DD Form 314 is with the equipment when it is transferred, but the losing unit keeps a record of NMCM/NMCS time for the current report period up to the day the equipment is dropped from the property book.
e) Destroy the DD Form 314 when the equipment is sent to salvage. However, the losing unit keeps a record of NMCM/NMCS time for the current report.
f) System DD Form 314 transfers any NMCM/NMCS data for the current reporting period to anew form. The old DD Form 314 is then destroyed.
SLIDE 13 (OFF)
SLIDE 14 (ON)
INSTRUCTOR NOTE: Have the student power up their computer systems and access the forms program.
Have them select the DD Form 314. Verify all computer screens have a DD Form 314 displayed. If the student is not using a computer with a forms program, refer the student to the blank DD Form 314 in the student handout. Have the student complete the form as the information is provided and the block is discussed.
INSTRUCTOR LED PRACTICAL EXERCISE
SITUATION: You have recently received two M9 Pistols. A DD Form 314 has not yet been prepared for the weapons. The last service completed by the previous unit was on 11 Apr 20XX. You decide to complete the forms today.
INSTRUCTOR NOTE: Refer the students to DA Pam 750-8, Figure 3-18
b. Prepare the DD Form 314 for use with multiple serial numbers.
1) Enter the last two digits of the calendar year in the shaded box at the upper left or lower left of the card.
The date is 16 June 20XX.
2) REGISTRATION NUMBER. Enter [See Remarks].
3) ADMINISTRATION NO. Enter the number of items being recorded in the remarks block. Enter [M17 #3 -
#4] for the Administration No.
4) NOMENCLATURE.
a) Enter the noun abbreviation in this block. Enter in [Pistol Semi-Automatic 9mm].
b) Enter the words, [Equip End Item] below the noun.
c) Place the ECC and the LIN under the word, Equip End Item. ECCs are available in DA Pam 750-8, Table
B-18. LINs are in the FED LOG. Use the exact nomenclature format listed in the FEDLOG. Enter in [EJ] and
[P98152].
5) MODEL. Enter the model number in ink. Enter [M17] in the model block.
6) ASSIGNED TO. Enter the name of the unit or organization owning the equipment in pencil. Enter [HHC, 13th MP BN] in the assigned to block.
7) REMARKS. When using the form to show services on more than one nonreportable item, serial numbers or administration numbers are listed in ink in the Remarks block on the front of the form. At the end of the year, the backside of the form is used. The serial or administration number does not require copying on the reverse side of the DD Form 314. Print "See Remarks Block Front Side: in the Remarks block. Enter [3.
9204924; 4. 9204925] in the Remarks block.
8) DATE RECEIVED. Leave blank or use as needed locally.
9) RECEIVED FROM. Leave blank or use as needed locally.
10) DISPOSITION. Leave blank or use as needed locally.
11) DATE BLOCKS. Indicate services scheduled with pencil entries and services completed with ink pen entries. Enter [Q] in the block for 11 Jul. This entry will be a pencil entry.
SLIDE 14 (OFF)
SLIDE 15 (ON)
INSTRUCTOR NOTE: Refer students to DA Pam 750-8, Figure 3-9; review the legend for the AWCMF 452.
Remind students that the GCSS-Army operator would need the information (Admin Number, Serial Number) from the new weapons to be able to enter them into the GCSS-Army box.
c. Review the AWCMF 452.
1) DATE: Reflects the date of the printout.
2) DODAAC: Reflects the DODAAC of the unit followed by the unit name.
3) ADMIN NUM: Self-explanatory.
4) READING: Reflects the current reading in miles, kilometers or hours as denoted by M, K, or H and the number.
5) NSN: Reflects the National Stock Number of the equipment.
6) MODEL: Reflects the model of the equipment.
7) NOUN: Reflects the Noun of the equipment.
8) PUB DATE: Reflects the applicable technical manuals and associated date.
9) LAST SERVICE: Reflects the type and date of the service.
10) DATE TYPE SERVICE DUE: Reflects the date and type of the service that is due next.
11) INTERVAL DAYS: Reflects the number of days until the next service is due.
12) READING DUE: Reflects the reading type (m-miles, k-kilometers, h-hours) and the number when the next service is due.
SLIDE 15 (OFF)
SLIDE 16 (ON)
Check on Learning:
SLIDE 16 ON:
Question: How long can you use a DD Form 314 for a reportable item of equipment?
Answer: One year.
Question: What symbol is used on the DD Form 314/AWCMF452 to represent a service that is required every 6 months?
Answer: S for semiannual
SLIDE 16 OFF:
Review Summary:
Conduct a Review/Summary of the information presented in the Learning Step.
Prepare DD Form 314
TLO - LSA 4. Learning Step / Activity TLO - LSA 4. Prepare DA Form 2404 or DA Form 5988-E
Instr Type (I:S Ratio): Military - ICH (1:15)*
Time of Instruction: 1 hr 25 mins Media Type: PowerPoint Presentation
Other Media: Unassigned Security Classification: This course/lesson will present information that has a Security
SLIDE 17 (ON)
INSTRUCTOR NOTE: Refer students to DA Pam 750-8, Para 3-10.
a. Purpose. DA Form 5988-E and DA Form 2404 (Equipment Inspection and Maintenance Worksheet) have four major purposes. These forms are the central record for-
1) Faults found…
This is the start of the file's text. The full file is on GovTribe.
File details come from the government source that posted it. Updated .