101-UAC03C00v_01_0 PERFORM FIELD MAINTENANCE ON PISTOL SEMI-AUTOMATIC 9MM M17.pdf
PDF 273 KB Posted
- Attached to
- Small Arms Maintenance (SAM 31)
- Solicitation number
- W912PB-27-Q-A004
About this file
This document is a CRM (Curriculum Resource Management) Lesson Plan Report for military training approved on August 8, 2025, effective immediately.
The lesson introduces baseline proficiencies to soldiers earning MOS 92Y (Unit Level PMCS on Small Arms) and focuses on performing Preventive Checks and Maintenance Services (PMCS) on the M17 semi-automatic 9mm pistol in austere and garrison environments. The lesson supports Army Learning Area professional competence and General Learning Outcome 14 regarding technical and tactical competence. Total instructional time is 4 hours and 50 minutes (3 hours 20 minutes discussion, 30 minutes practical exercise), with 10 minutes of classroom setup required. The training is classified as Unclassified with FD3 foreign disclosure restrictions prohibiting instruction to international military students. The lesson is distributed to U.S. Government agencies and their contractors only. Required reference materials include DA PAM 750-8, TM 9-1005-470-10, and TM 9-1005-470-23&P. The lesson comprises seven learning steps: clearing the M17 pistol, disassembling the M17, inspecting for serviceability, inspecting for cleanliness, lubricating with CLP, assembling the M17, and performing a function check. Equipment requirements include one M17 pistol per student at a 1:1 ratio, classroom lecture technology packages, computers with internet access, and standard classroom furniture. Instructors must be qualified and certified per TRADOC requirements with demonstrated proficiency in MOS/SL competencies. A practical exercise with 30-minute duration and 1:30 instructor-to-student ratio is included, with evaluation occurring in exam lesson 101-92Y10D106. The lesson incorporates risk management, environmental considerations, and Army Learning Model principles emphasizing critical thinking and operational relevance.
View the file
Other files
Show all 14
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
CUI
CRM LESSON PLAN REPORT
PERFORM FIELD MAINTENANCE ON PISTOL SEMI-AUTOMATIC 9MM M17
101-UAC03C00 / 01.0 ©
Approved 08 Aug 2025
Effective Date: 08 Aug 2025
SCOPE:
This lesson introduces baseline proficiencies to the Soldier trying to earn MOS 92Y, Perform Unit Level PMCS on Small Arms. The expected learning outcomes are that a Soldier will perform Preventive Check Maintenance Service on a M17 pistol. The Soldier will be able to perform this action in an austere environment, in accordance with individual task: 101-92Y-1043 . The lesson supports the Army Learning Area (ALA) of professional competence, and General Learning Outcome (GLO) 14, Soldiers and Civilians are technically and tactically competent. .The goal of this lesson is to provide the Soldier with the knowledge and skills to Perform Unit Level PMCS on Small Arms DA
PAM 750-8, TM 9-1005-470-10, TM 9-1005-470-23&P
Distribution Restriction: Distribution authorized to U.S. Government agencies and their contractors only export controlled. This determination was made on 22 August 2017. Insert Robins AFB, GA 31098
Destruction Notice: Destroy by any method that will prevent disclosure of contents or reconstruction of the document Foreign Disclosure: FD3 - This training product has been reviewed by the developers in coordination with the armorer tsp foreign disclosure officer. This training product cannot be used to instruct international military students.
SECTION I. ADMINISTRATIVE DATA
All Course Masters/POIs Including This Lesson
Courses
Course Number
None
POIs
Version Title Phase Status
Task(s) Taught(*) or Supported
Reinforced Task(s)
Knowledge
Skill
Administrative/ Academic Hours
Instructor Action
Test Lesson(s)
Prerequisite Lesson(s)
Training Material Classification
POI Number Version Title Phase Status
Task Number Task Title Status
Task Number
Task Title
Status
Knowledge Id
Title
Taught
Required
Skill Id
Taught
The administrative/academic (50 min) hours required to teach this lesson are as follows:
Academic
Resident Hours
/ Methods
Yes Yes
3 hrs 0 hrs
20 mins 30 mins
Discussion (Small or Large Group) Practical Exercise (Hands-On/Written)
Total Hours(50 min): 4 hrs 0 mins
The instructor action (60 min) hours required to teach this lesson are as follows:
Hours/Actions
0 hrs 10 mins Classroom Setup
Total Hours (60 min): 0 hrs 10 mins
Lesson Number Version
Lesson Title
Lesson Number Version
Lesson Title
Security Level: This course/lesson will present information that has a Security Classification of: U - Unclassified.
Foreign Disclosure Restrictions
FD3. This training product has been reviewed by the developers in coordination with the armorer tsp foreign disclosure officer. This training product cannot be used to instruct international military students.
References
Student Study Assignment
Requirements none
Instructors must be qualified and certified. Qualification means the faculty member has successfully completed the current TRADOC Center for Teaching and Learning Excellence approved qualification course.
Qualified faculty members can serve as an assistant to a certified instructor/facilitator in order to achieve the technical standard for the course content for which they are assigned.
Certification means the faculty member has completed the qualification requirements, has demonstrated the technical skills and competencies and has been evaluated and certified by a certified faculty member.
Instructor/facilitator candidates must demonstrate proficiency with the specialized content and competencies applicable to the MOS/SL, functional duty/course. After attaining the required technical standard the faculty member should rehearse with a certified instructor/facilitator prior to presenting a lesson or lessons to actual students.
A certified instructor/facilitator must be present to evaluate instructor/facilitator candidates during their initial presentation of each lesson until certified in every lesson for the course. It is the discretion of the certified instructor if the initial presentation was adequate or if more than one evaluation is needed to grant certification.
The certification process must ensure certified instructors display the highest level of competence in instructional techniques, subject matter expertise and the ethics needed to perform their training and education duties and responsibilities to the Army standard.
Support Personnel
Information Technology Support Personnel will provide support.
Number
Date
AR 25-400-2 Army Records Management Program 18 Oct 2022
PAM 750-8 THE ARMY MAINTENANCE MANAGEMENT
SYSTEM (TAMMS) USERS MANUAL
22 Aug 2005
TM 9-1005-470-10 OPERATOR MANUAL FOR MODULAR HANDGUN
SYSTEM (MHS) PISTOL, 9MM, SEMIAUTOMATIC
M17 (NSN 1005-01-661-7317) (EIC 2VN) PISTOL,
9MM, SEMIAUTOMATIC M18 (NSN 1005-01-661-
7323) (EIC 2VP) PISTOL, 9MM, SEMIAUTOMATIC
GO (NSN 1005-01-661-7309) (EIC 2VO)
31 Mar 2019
TM 9-1005-470-23&P MAINTAINER MAINTENANCE MANUAL INCLUDING
REPAIR PARTS AND SPECIAL TOOLS LIST FOR
MODULAR HANDGUN SYSTEM (MHS) PISTOL,
9MM, SEMIAUTOMATIC M17 (EIC 2VN) PISTOL,
9MM, SEMIAUTOMATIC M18 (EIC 2VP) PISTOL,
9MM, SEMIAUTOMATIC GO
30 Jun 2019
Additional Support Personnel
Equipment for Instruction
Name
ID - Name Student
Student
Ratio Qty
Man
Materials
(Note: Asterisk before ID indicates a TADSS.)
Instructor Materials:
1. Lesson plan.
2. Practical Exercise (PE).
3. Practical Exercise Solution.
Student Materials:
1. Practical Exercise
2. Pencil/Pen
3. Student Handout
4. Laptop with internet connectivity
5. AR 750-8, TM 9-1005-470-10, TM 9-1005-470-23&P.
Ratio Ratio Spt Qty Exp
1005-01-661-7317 - Handgun System, Modular: XM17 Remarks:
1:1 0:0 No 1 No
2540-00-840-9544 - TABLE
TOP,SEAT,PERS
Remarks: One per student, instructor, and visitor area.
1:1 1:1 No 0 No
5975-01-099-1035 - Rack, Electronic Equipment Remarks: One per classroom
0:0 0:0 No 1 No
6515-00-612-0000 - Pencil Remarks:
1:1 0:0 No 0 No
6515-01-211-5306 - Paper, Printer, 2- 1/2 Inch Roll Remarks:
0:0 0:0 No 1 No
6730-01-553-0216 - Projector, Multimedia, Elmo HV-7100SX Digital Visual Presenter Remarks: One per classroom
0:0 0:0 No 0 No
6730-01-C17-1205 - Screen Projection Wall/Ceiling: 34456L Dalite Remarks: Two per classroom
0:0 0:0 No 0 No
7010-01-591-9004 - Digital Computer:
AN/TYQ-161(V)5 USS
Remarks:
1:1 1:1 No 0 No
7025-01-559-3463 - Lexmark E352DN High-Performance Printer Remarks: One per student and one for administrative purposes.
0:0 0:0 No 0 No
7045-01-444-5160 - Disk, CD Recordable, 74 Minutes, 650MB Remarks:
1:1 1:1 No 0 No
7105-01-470-5332 - Chair, Desk, Lounge with Arms Remarks: One per student, instructor, and visitor area.
1:1 1:1 No 0 No
7730-01-Y02-2635 - Television, 55 Inch, LED, HDTV: LG 55LW340C Remarks: Three per classroom
0:0 0:0 No 0 No
Classroom, Training Area, and Range
ID - Name Quantity Student
Ratio
Setup Mins
Cleanup
Mins Requirements ECP-2-1750-30
ECP Standard Lecture Technology Package, 1750 Square Foot, 30 Persons Remarks:
2 1:15 10 10
Ammunition Requirements DODIC - Name Exp
None
Student Ratio
Instruct Ratio
Spt Qty
Instructional Guidance/ Conduct of Lesson
Proponent Lesson Plan Approvals
NOTE: Before presenting this lesson, instructors must thoroughly prepare by studying this lesson and identified reference material.
NOTE: Instructor/Facilitator will ensure to incorporate Army Learning Model and Operational Environment experiences.
ARMY LEARNING MODEL
All instructors/Facilitators will facilitate training under Army Learning Model. Ensuring training is based on quality, relevance and effectiveness of face-to-face learning experiences through outcome-oriented instructional strategies. This type of instruction will foster critical thinking, initiative and operational relevance in context.
OPERATIONAL ENVIRONMENT INTEGRATION
Instructors/Facilitators will facilitate conversations from students and relate this lesson to current Operational Environments (OE) using personal experiences and/or examples obtained from the Center for Army Lessons Learned (CALL). Instructors should provide sufficient OE variables and scenarios to produce the desired Soldier training outcome for this lesson.
NOTE: Verify that the training material is loaded on the computers before beginning the lesson.
Name Rank Position Date michelle.r.brown8.civ Not available Approver 08 Aug 2025
SECTION II. INTRODUCTION
Method of Instruction: Discussion (Small or Large Group) Mode of Delivery: Resident Instruction
Instr Type (I:S Ratio): Military - ICH (1:15) Time of Instruction: 5 mins
Motivator
Terminal Learning Objective
Safety
As a Unit Armorer, it is important that you have a basic understanding on how to conduct preventive maintenance checks and services (PMCS) for small arms plays a vital part of operational readiness. You need to know how to use equipment technical manuals. You need to know, recognize, and understand maintenance forms, what they are, how to use them.
NOTE. Inform the students of the following Terminal Learning Objective requirements.
At the completion of this lesson, you [the student] will:
Action: Perform Unit Level PMCS on Small Arms Conditions:
Assigned as a Unit Supply Specialist (92Y), in a field or garrison environment, given a requirement to perform unit level preventative maintenance checks & services on small arms.
Given a computer with internet access, pen/pencil, M17 pistol, access to the Army Publishing
Directorate website, AR 25-400-2, DA PAM 750-8, TM 9-1005-470-10, and TM 9-1005-470-
23&P.
Standards:
Perform unit level preventative maintenance checks and services on small arms in sequential order and with 100% accuracy.
Learning Domain - Level: Psychomotor - Precision
No JPME Learning Areas Supported: Supports GLO 10 & 11
In a training environment, leaders must perform a risk assessment in accordance with current Risk Management Doctrine. Leaders will complete the current Deliberate Risk Assessment Worksheet in accordance with the TRADOC Safety Officer during the planning and completion of each task and sub-task by assessing mission, enemy, terrain and weather, troops and support available-time available and civil considerations, (METT-TC). Note: During MOPP training, leaders must ensure personnel are monitored for potential heat injury. Local policies and procedures must be followed during times of increased heat category in order to avoid heat related injury. Consider the MOPP work/rest cycles and water replacement guidelines IAW current CBRN doctrine. All operations will be performed to protect and preserve Army personnel and property against accidental loss. Procedures will provide for public safety incidental to Army operations and activities and safe and healthful workplaces, procedures, and equipment. Observe all safety and/or environment precautions regarding electricity, cable, and lines. Provide ventilation for exhaust fumes during equipment operation and use hearing protection when required IAW AR 385-10, the Clean Air Act (CAA) and the CAA amendments, and the OSHA Hazard Communication standard. Accidents are an unacceptable impediment to Army missions, readiness, morale, and resources. Decision makers at every level will employ risk management approaches to effectively preclude unacceptable risk to the safety of personnel and property affiliated with this task. (a) Take personal responsibility. (b) Practice
Risk Assessment Level safe operations. (c) Recognize unsafe acts and conditions. (d) Take action to prevent accidents. (e) Report unsafe acts and conditions. No food or drink is allowed near or around electrical equipment (CPU, file servers, printers, projectors, etc.) due to possible electrical shock or damage to equipment. Exercise care in personal movement in and through such areas. Avoid all electrical cords and associated wiring. In event of electrical storm, you will be instructed to power down equipment.
Low - 1: Fire Hazard.
2. Health Concerns.
3. Weather Hazards.
4. Operate Laptop Computer.
Assessment: 1. Fire, Smoke, limited visibility.
2. Heart Attack or other Medical Condition.
3. Cold Weather, Hot Weather, Tornados, Hail, Sleet, Snow, Rain, Lighting.
4. Liquid Spill, Electrical Hazard.
5. Trip/Falls.
Controls: 1. Emergency Evacuation Plan.
2. Automatic Electronic Defibrillator (AED) and trained personnel, Pre-Accident Plan.
3. Stay indoors and away from windows, wear appropriate clothing for conditions.
4. Liquids not allowed on tables/desks with computers.
5. High Visibility Marking, Briefing.
Leader Actions: 1. Provide Specific Direction to students.
2. Provide current equipment and trained personnel locations.
3. Provide Specific Direction on classroom hazards.
4. Provide Specific Direction on the established evacuation plan.
5. Provide Specific Direction for any emergency situation.1. Provide Specific Direction to students.
2. Provide current equipment and trained personnel locations.
3. Provide Specific Direction on classroom hazards.
4. Provide Specific Direction on the established evacuation plan.
5. Provide Specific Direction for any emergency situation.
Environmental Considerations
Instructional
NOTE: Instructor should conduct a risk assessment to include environmental considerations IAW the current environmental considerations publication, and ensure students are briefed on hazards and control measures.
It is the responsibility of all Soldiers, DA Civilians and Contractors to protect the environment from damage. Environmental protection is not just the law but the right thing to do. It is a continual process and starts with deliberate planning. Always be alert to ways to protect our environment during training and missions. In doing so, you will contribute to the sustainment of our training resources while protecting people and the environment from harmful effects. Refer to ATP 3-34.5 Environmental Considerations and GTA 05-08-002 ENVIRONMENTAL-
RELATED RISK ASSESSMENT.
In this lesson, you'll learn to perform unit level PMCS on small arms emphasizing the critical role of creating an audit
Lead-in trail for your unit supply's success.
SECTION III. PRESENTATION
TLO - LSA 1. Learning Step / Activity TLO - LSA 1. Clear the M17 pistol
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 25 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security Classification of: U - Unclassified.
Note: Marked as (*) is derived from the parent learning object
LSA 1- Clear the M17 pistol.
INSTRUCTOR NOTE: Help students understand how to use a technical manual (TM) to perform Preventive
Check Maintenance Service (PMCS). The technical manual contains information for safe and efficient operation of equipment. It provides general knowledge of the equipment, its characteristics and operation procedures. The manual also contains troubleshooting procedures to assist in keeping the equipment operating properly.
1) The 10 series Technical Manual identifies operator/crew PMCS.
2) The 20 series Technical Manual identifies unit maintenance PMCS.
For the designation 23&P, indicates this Technical Manual (TM) is applicable to maintenance at the unit and direct support level. The P indicates that repair parts are also included in the Technical Manual. Some TMs may also include special tool listings.
SLIDE OFF 3:
SLIDE ON 4:
INSTRUCTOR NOTE: Use the computer to open TM 9-1005-470-10. Display TM on Screen using projector in classroom as it is discussed. Have students follow along with their TM.
First page/Title Page: List TM number, item description/model, NSN, and TM date.
GENERAL: To use this manual efficiently, there are several things you need to know.
a) All references in the manual are to work packages or to another manual.
b) Whenever the male gender is mentioned in the technical manual, it also pertains to the female gender.
c) Procedures apply to all models unless otherwise noted.
INDEXES: The manual is organized to help you quickly find the information you need. There are several useful indexes.
a) Table of Contents. Lists in order all chapters, work packages, and appendixes. The table of contents lists all work packages, figures, and tables with page references.
b) Nomenclature Cross-Reference List. Gives an alphabetical list of the common names that are substituted for the official nomenclature in the manual.
c) Chapter Overviews. Summarizes material covered in the chapter.
d) Troubleshooting Symptom Index. Lists in alphabetical order parts of the weapon with possible malfunctions. References work package pages of the troubleshooting table.
e) Alphabetical Index. Located at the end of the manual. An extensive subject index for everything in the manual. It gives work package reference.
SLIDE 4 OFF:
SLIDE 5 ON:
INSTRUCTOR NOTE: Refer students to operating procedures (TM 9-1005-470-10) page.0005-5.
Clearing the M17 Pistol:
1. Point weapon in a safe direction.
2. Press up on manual safety lever (Figure 5, Item 2) to engage safety.
3. Press magazine catch (Figure 5, Item 4) to release magazine.
4. Push up on slide catch lever (Figure 5, Item 5), then pull slide to rear to lock into place. Visually ensure last round has been ejected from pistol. (If ac
5. Conduct three-point safety check to ensure there is no cartridge, foreign debris, or any physical damage.
a. Ensure chamber is empty.
b. Inspect for no magazine.
c. Inspect breech face.
6. Press slide catch lever (Figure 5, Item 5) to release slide (figure 5, Item 1) forward.
SLIDE 5 OFF:
SLIDE 6 ON:
Check on Learning:
Q: What is the TM number for the M17 pistol?
A: TM 9-1005-470-10.
REF: TM 9-1005-470-10.
Q: What is the first step of clearing the pistol?
A: Point weapon in a safe direction.
REF: TM 9-1005-470-10. PG.0005-5.
SLIDE OFF: 6
SLIDE 7 ON:
Review Summary:
Summary: Take a few minutes to summarize the main topics addressed in this LSA: Review technical manual and clear the M17 pistol.
SLIDE 7 OFF:
TLO - LSA 2. Learning Step / Activity TLO - LSA 2. Disassemble the M17 pistol
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 25 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
SLIDE 8 ON:
LSA 2: Disassemble the M17 pistol.
INSTRUCTOR NOTES: Refer students to TM 9-1005-470-10, pg. 0013-1.
DISASSEMBLY:
1. Unload/clear weapon (WP 0005)
2. Push on slide catch lever (Figure 1, Item 2) and pull slide (Figure 1, Item 1) to rear. Slide will lock in place. Ensure recoil spring guide assembly is parallel to barrel.
3. Rotate Takedown lever (Figure 1, Item 3) clockwise.
4. Pull slide (Figure 2, Item 1) to rear of receiver to release slide catch lever (Figure 2, Item 3)
5. Pull Slide forward and remove from receiver rails (Figure 2, Item 2) maintaining grip around slide and recoil spring guide assembly (Figure 2, Item 4).
6. Slightly compress recoil spring guide assembly (Figure 3, Item 1) while lifting and removing from slide.
Allow recoil spring guide assembly to expand slowly.
7. Lift and remove barrel (Figure 4, Item 1) from slide (Figure 4, Item 2).
SLIDE 8 OFF:
SLIDE 9 ON:
INSTRUCTOR NOTES: Refer students to ordinance IMI (Interactive Multimedia instruction) regarding the
M17 pistol. CAC login. Click following link:
https://cac.cascom.army.mil/G3/TDD/Files/demos/M17_01_09_2020_Beta/index.html
Run scenario with students for virtual disassembly of the M17.
SLIDE 9 OFF:
SLIDE 10 ON:
Q: How many processes are there in the M17 disassembly?
A: 7
REF: TM 9-1005-470-10, pg. 0013-1.
Q: What is the third step in the M17 disassembly process?
A: Rotate Takedown lever clockwise.
REF: TM 9-1005-470-10, pg. 0013-1.
SLIDE 10 OFF:
SLIDE 11 ON:
Review Summary: Take a few minutes to summarize the main topics addressed in this LSA: Disassembly of the M17 pistol.
SLIDE 11 OFF:
SLIDE 12 ON:
TLO - LSA 3. Learning Step / Activity TLO - LSA 3. Inspect the M17 pistol for serviceability
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 25 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
LSA 3- Inspect the M17 pistol for serviceability.
INSTRUCTOR NOTES: Refer students to TM 9-1005-470-10, chapter 4 (PMCS). Briefly define PMCS
(Preventive Maintenance Check Services) to students and before and after PMCS.
PMCS: PMCS is the care, servicing, inspection, detection, and correction of minor faults before these faults cause serious damage, failure, or injury.
Operator Requirements:
1. Perform PMCS each time pistol is used.
2. Perform PMCS in order.
3. Perform BEFORE PMCS just before shooting pistol.
4. Perform AFTER PMCS right after shooting pistol.
5. Attention should be paid to WARNINGS, CAUTIONS, and NOTES.
https://cac.cascom.army.mil/G3/TDD/Files/demos/M17_01_09_2020_Beta/index.html
6. Use DA Form 2404/DA Form 5988-E, Equipment Inspection and Maintenance Worksheet, to record any faults that are discovered before, during, or after use unless you can perform repair. DO NOT record faults you fix.
SLIDE 12 OFF:
SLIDE 13 ON:
Explanation of column entries.
Item No. Column
Numbers in this column are for reference. Item numbers appear in the order in which checks and services must be performed for the intervals listed.
Interval Column
This column indicates when each check is to be performed in the procedure column.
Item to be checked or serviced column
This column list the items to be checked or serviced.
Procedure column
This column contains a brief description of the procedure by which the check is to be performed. It contains all the information required to accomplish the checks and services.
Not Mission Capable (NMC) if: column
Information in this column describes what faults will keep the equipment from being capable of performing its primary mission. If applicable, following Not Mission Capable (NMC) if: condition is suggested remedy that will correct the discovered discrepancy. Follow Standard Operation Procedures (SOP) for maintaining the equipment or reporting equipment failure. Report any malfunctions or failures on DA Form 2404/DA Form
5988-E (Equipment Inspection and Maintenance Worksheet) or refer to DA PAM 750-8, The army
Maintenance Management System (TAMMS) Users Manual.
INSTRUCTOR NOTES: Refer students to table 1, PMCS for modular handgun system (MHS). Before & after
PMCS.
SLIDE 13 OFF:
SLIDE 14 ON:
Check on Learning:
Q: How many steps are in the before PMCS process of the M17 pistol?
A:8
REF: TM 9-1005-470-10.
Q: How many steps are in the after PMCS process of the M17 pistol?
A: 6
SLIDE 14 OFF:
SLIDE 15 ON:
Take a few minutes to summarize the main topics addressed in this LSA:
Inspect the M17 pistol for serviceability.
SLIDE 15 OFF:
SLIDE 16 ON:
TLO - LSA 4. Learning Step / Activity TLO - LSA 4. Inspect for cleanliness.
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 25 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
SLIDE 19 OFF:
SLIDE 20 ON:
LSA 5 Inspect for cleanliness
Instructor Notes: Refer students to TM 9-1005-470-10. Go to page 0013-5 and 00-13-6 for cleaning instructions.
Warning: Always clear weapon before cleaning. Ensure weapon is pointed in a safe direction. Failure to comply may result in death or injury personnel.
Caution: Bore burns is for cleaning bore only. Use of bore brush on any other part of pistol will cause damage.
Barrel
1. Using cleaning rod, insert cleaning patch soaked with CLP (Cleaner Lubricant and Preservative) in chamber and end of barrel and push out muzzle to remove loose firing residue and soften carbon deposits.
2. Insert bore brush into chamber end of barrel and push completely through. Repeat several times to loosen carbon deposits.
3. Wipe loose carbon deposits from bore with clean patch soaked with CLP.
4. Dry barrel by pushing swab though bore. Repeat as necessary until clean swab can be observed.
Slide Assembly
1. Clean slide assembly (Figure 6, Item 1) with cloth. A soft brush and CLP can assist in removal of excess dirt and carbon buildup. Ensure the breech face (Figure 6, Item 2), slide rail (Figure 6, Item 3), and extractor (Figure 6, Item 4) are free of excess dirt and residue.
2. Wipe dry with a cloth.
Recoil Spring Guide Assembly
Clean recoil spring guide assembly using CLP and a soft brush or cloth.
Receiver/Grip Module Assembly
1. Use wiping rag to clean receiver/grip module assembly.
2. Use cotton swabs to clean hard to reach areas. Pay special attention to the frame rails (Figure 7, Item
3).
3. Clean the magazine well (Figure 7, Item 2) of any dirt dust, or residue with wiping rag.
Magazine
1. Wipe magazine tube and follower with wiping rag. Clean tube and follower with CLP and a soft brush.
2. Moisten a cloth with CLP and wipe magazine spring, magazine insert, and floorplate clean.
SLIDE 20 OFF:
SLIDE 21 ON:
Q: What are the 5 items that will be cleaned on a M17 pistol?
A: Barrell, Side Assembly, Recoil Spring Guide Assembly, Receiver/Grip
Module Assembly, and Magazine.
REF: TM 9-1005-470, pg. 0013-5 & 0013-6.
Q: or use of cleaning solvents may be harmful to finish of pistol.
A: Unauthorized, excessive.
REF: TM 9-1005-470, pg. 0013-5.
SLIDE 21 OFF:
SLIDE 22 ON:
Review inspect for cleanliness.
SLIDE 22 OFF:
SLIDE 23 ON:
TLO - LSA 5. Learning Step / Activity TLO - LSA 5. Lubricate with CLP.
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 20 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
LSA 6 – Lubricate with CLP.
INSTRUCTOR NOTES: Refer students to TM 9-1005-470-10, WP 0013-10 and 11. Have weapons available for demonstration.
Lubrication (WP 0013)
Caution: Do not mix lubricants on weapon. Thoroughly clean the weapon when changing from one cleaner/lubricant to another. Failure to comply may result in malfunction or damage to equipment.
NOTE: CLP, LSA, and LAW are the only lubricants authorized for MHS. Under all but the coldest arctic conditions, CLP is the cleaner/lubricant to use on pistol. Use LAW at temperatures below -10 degrees
Fahrenheit (-23 degree Celsius). Always shake container well before use. Apply using a clean rag or swab.
Lightly lubricated means lubricant is a film barely visible to the eye. Generously lubricated means lubricant is thick enough to spread with finger.
1. Barrel. Lightly lubricate exterior surfaces of barrel.
2. Slide Assembly
Caution: Do not lubricate striker or allow lubricant to flow into striker. Failure to comply may result in damage to equipment.
a. Lightly lubricate rails on both sides of slide.
b. Lightly lubricate bushing surface of slide.
3. Recoils Spring Guide Assembly.
Lightly lubricate recoil spring and spring guide.
4. Receiver/Grip Module Assembly
Lubricate four receiver rails with one drop of lubricant per rail.
SLIDE 23 OFF:
SLIDE 24 ON:
Q: What are the only lubricate authorized for the Modular Handgun
System?
A: CLP, LSA, and LAW are the only lubricants authorized for MHS.
REF: TM 9-1005-470-10, WP 0013-10.
Q: What is needed when you change from one lubricant with another lubricant?
A: Clean weapon thoroughly.
SLIDE 24 OFF:
SLIDE 25 ON:
Lubricate with CLP.
SLIDE 25 OFF:
SLIDE 26 ON:
TLO - LSA 6. Learning Step / Activity TLO - LSA 6. Assemble the M17
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 20 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
LSA 7 Assemble the M17
INSTRUCTOR NOTE: Refer students to TM 9-1005-470-10, WP 0013-12-15. Have weapons available for demonstration.
Magazine Assembly (WP 0013-12)
a. Position magazine follower on spring.
b. Align flat side of insert with flat side of magazine tube and compress spring fully into tube until insert is flush with magazine tube bottom.
c. Holding magazine insert in place, slide floorplate onto magazine tube lips until floorplate is locked in place by insert.
Assembly (WP 0013-12-15)
Install muzzle of barrel into forward open end of slide, then lower barrel into slide.
Caution: During recoil spring guide assembly insertion, spring tension must be maintained until spring guide is fully seated on cutaway on barrel lug to prevent damage or loss of spring.
Note: Step 2 is for M17.
Install rectangular end of recoil spring guide assembly into slide. Slightly compress recoil spring and lower spring guide until fully seated onto barrel lug.
SLIDE 26 OFF:
SLIDE 27 ON:
Q: What direction do you insert the muzzle when assembling the weapon?
A: Install muzzle of barrel into forward open end of slide, then lower barrel into slide.
REF: TM 9-1005-470-10, WP 0013-12.
Q: What will prevent the insertion of magazine into receiver/grip module when the slide is removed?
A: Takedown safety lever.
Assemble M17.
SLIDE 28 OFF:
SLIDE 29 ON:
TLO - LSA 7. Learning Step / Activity TLO - LSA 7. Perform a function check on M17.
Instr Type (I:S Ratio): Military - ICH (1:10)* (Primary and Assistant Instructor(s): Qualified
Military or Civilian Instructor/Subject Matter Expert (SME); Complete Familiarity with TRADOC Regulation 350-6. Instructors must meet certification requirements in accordance with TRADOC Regulation 350-70; Army Regulation 614-20; QMS Policy #17 Instructor Development Training Plan (IDTP), Course 101-92Y10 CMP, Trained on GCSS-Army Educational Environment.
Time of Instruction: 20 mins Media Type: Unassigned Other Media: Unassigned
Security Classification: This course/lesson will present information that has a Security
LSA 8 Preform a function check on M17.
INSTRUCTOR NOTE: Refer students to TM 9-1005-470-10, WP 0014-1. Have weapons available for demonstration.
Perform a Safety/Function Check (WP 0014-1 to 0014-3)
WARNING: Before performing safety/function check, pistol must be cleared, and magazine removed.
Failure to comply may result in death or injury to personnel.
1. Unload and Clear Weapon (WP 0005)
2. Insert empty magazine into magazine well. Magazine catch must lock magazine in place.
3. Grasp slide and pull completely to rear until slide catch lever locks slide open.
4. Press magazine catch. Magazine must fall free of pistol under its own weight.
5. Pull back and release slide to forward position.
6. Push up on manual safety lever to engage safety.
7. Press trigger to rear. Striker should not be released.
8. Push down manual safety lever to disengage safety.
9. Press trigger and hold to rear. Striker should be released, and an audible click should be heard.
10. While still holding trigger to rear, pull slide completely to rear and release slide.
11. Release trigger. A light audible click should be heard and felt as striker resets.
12. Press trigger. The striker should release, and you should hear and feel a loud audible click.
13. Push up on manual safety lever to engage safety.
Record documents in the ARIMS file.
SLIDE 29 OFF:
SLIDE 30 ON:
Q: What must you do before performing a functions check?
A: Pistol must be cleared, and magazine removed.
REF: TM 9-1005-470-10, WP 0014-1.
Q: While still holding the trigger to the rear, what is the next step?
A: Pull slide completely to rear and release slide.
REF: TM 9-1005-470-10, WP 0014-1.
SLIDE 30 OFF:
SLIDE 31 ON:
Summary: Take a few minutes to summarize the main topics addressed in this LSA: Review perform functions check on a M17.
SLIDE 31 OFF:
SECTION IV. SUMMARY
Instr Type(I:S Ratio): Military - ICH (1:15) Time of Instruction: 5 mins
Check on Learning Q: What is the TM number for the M17 pistol?
A: TM 9-1005-470-10.
Q: What is the third step in the M17 disassembly process?
A: Rotate Takedown lever clockwise.
REF: TM 9-1005-470-10, pg. 0013-1.
Q: What is the third step in the M17 disassembly process?
A: Rotate Takedown lever clockwise.
REF: TM 9-1005-470-10, pg. 0013-1
Q: What form is used for recording faults?
A: DA Form 2404
REF: DA Form 750-8 and TM 9-1005-470-23&P
Q: or use of cleaning solvents may be harmful to finish of pistol.
A: Unauthorized, excessive.
REF: TM 9-1005-470, pg. 0013-5
Q: What are the only lubricate authorized for the Modular Handgun System?
A: CLP, LSA, and LAW are the only lubricants authorized for MHS.
REF: TM 9-1005-470-10, WP 0013-10
Q: What direction do you insert the muzzle when assembling the weapon?
A: Install muzzle of barrel into forward open end of slide, then lower barrel into slide.
REF: TM 9-1005-470-10, WP 0013-12
Q: What must you do before performing a functions check?
A: Pistol must be cleared, and magazine removed
REF: TM 9-1005-470-10, WP 0014-1
Review/ Summary Take a few minutes to summarize the main topics addressed in the lesson:
• Clear the M17 pistol
• Disassemble the M17 pistol
• Inspect the M17 pistol for serviceability
• Record faults on a DA Form 2404
• Inspect for cleanliness
• Lubricate with CLP/LSA
• Assemble the M17 pistol
• Perform a function check on the M17 pistol
• Record documents in the ARIMS file
SECTION V. STUDENT EVALUATION
Testing
Feedback
N/A
NOTE: Feedback is essential to improving training, always encourage students to provide comments and ensure to complete the Module AAR.
NOTE: Review the completed practical exercise with the students. Ensure lesson is understood by asking questions and receiving feedback from the students. Clear up any misunderstandings.
A-1
Appendix A - Viewgraph Masters
Perform Field Maintenance on Pistol Semi-Automatic 9mm M17
101-UAC03C00 / Version 01.0 ©
Sequence Media Name Media Type 1 Power Point PPTX
B-1
Appendix B - Assessment Statement and Assessment Plan
Assessment Statement: None.
Assessment Plan: None.
C-1
Appendix C - Practical Exercises and Solutions
PRACTICAL EXERCISE(S)/SOLUTION(S) FOR LESSON 101-UAC03C00 Version 01.0 ©
PRACTICAL EXERCISE SHEET 101-UAC03C00 PE1
Time: 0 hours 30 minutes
I:S Ratio: 1:30
Title 101-92Y10D104 PRACTICAL EXERCISE Lesson Number/Title
101-UAC03C00 Version 01.0 © / Perform Field Maintenance on Pistol Semi-Automatic 9mm M17
Security Classification Unclassified
Introduction This Practical Exercise reinforces material taught in this lesson and is used to evaluate knowledge retainability. You will have 1 hour to complete this Practical Exercise.
Motivator The commander has requested you to perform a PMCS on a M17 pistol.
Terminal Learning Objective
Safety
NOTE. Inform the students of the following Terminal Learning Objective requirements.
At the completion of this lesson, you [the student] will:
Action: Perform Unit Level PMCS on Small Arms Conditions:
Assigned as a Unit Supply Specialist (92Y), in a field or garrison environment, given a requirement to perform unit level preventative maintenance checks & services on small arms.
Given a computer with internet access, pen/pencil, M17 pistol, access to the Army Publishing
Directorate website, AR 25-400-2, DA PAM 750-8, TM 9-1005-470-10, and TM 9-1005-470-
23&P.
Standards:
Perform unit level preventative maintenance checks and services on small arms in sequential order and with 100% accuracy.
In a training environment, leaders must perform a risk assessment in accordance with current Risk Management Doctrine. Leaders will complete the current Deliberate Risk Assessment Worksheet in accordance with the TRADOC Safety Officer during the planning and completion of each task and sub-task by assessing mission, enemy, terrain and weather, troops and support available-time available and civil considerations, (METT-TC). Note: During MOPP training, leaders must ensure personnel are monitored for potential heat injury. Local policies and procedures must be followed during times of increased heat category in order to avoid heat related injury. Consider the MOPP work/rest cycles and water replacement guidelines IAW current CBRN doctrine. All operations will be performed to protect and preserve Army personnel and property against accidental loss. Procedures will provide for public safety incidental to Army operations and activities and safe and healthful workplaces, procedures, and equipment. Observe all safety and/or environment precautions regarding electricity, cable, and lines. Provide ventilation for exhaust fumes during equipment operation and use hearing protection when required IAW AR 385-10, the Clean Air Act (CAA) and the CAA amendments, and the OSHA Hazard Communication standard. Accidents are an unacceptable impediment to
C-2
Risk Assessment Level
Environmental Considerations
Evaluation
Instructional Lead-in
Resource
Special Instructions
Army missions, readiness, morale, and resources. Decision makers at every level will employ risk management approaches to effectively preclude unacceptable risk to the safety of personnel and property affiliated with this task. (a) Take personal responsibility. (b) Practice safe operations. (c) Recognize unsafe acts and conditions. (d) Take action to prevent accidents. (e) Report unsafe acts and conditions. No food or drink is allowed near or around electrical equipment (CPU, file servers, printers, projectors, etc.) due to possible electrical shock or damage to equipment. Exercise care in personal movement in and through such areas. Avoid all electrical cords and associated wiring. In event of electrical storm, you will be instructed to power down equipment.
Low
NOTE: Instructor should conduct a risk assessment to include environmental considerations IAW the current environmental considerations publication, and ensure students are briefed on hazards and control measures.
Environmental protection is not just the law but the right thing to do. It is a continual process and starts with deliberate planning. Always be alert to ways to protect our environment during training and missions. In doing so, you will contribute to the sustainment of our training resources while protecting people and the environment from harmful effects. Refer to ATP 3-
34.5 Environmental Considerations and GTA 05-08-002 ENVIRONMENTAL-RELATED RISK
ASSESSMENT.
This lesson is evaluated in exam lesson 101-92Y10D106.
As the unit supply specialist, supply sergeant or a logistician, one of your primary duties is to account for property or be knowledgeable in the fundamentals thereof. You are preparing to conduct the session. Refer to TM 9-1005-470-10, TM 9-1005-470-23&P, and DA PAM 750-8.
Instructor Materials:
Instructor will conduct an AAR at the end of this Practical Exercise.
Student Materials:
1. Practical Exercise
2. Pencil/Pen
3. Student Handout
4. Laptop with internet connectivity
5. TM 9-1005-470-10, DA PAM 750-8.
Procedures Feedback Requirements Instructor will conduct an AAR at the end of this Practical Exercise.
C-3
SOLUTION FOR
PRACTICAL EXERCISE 101-UAC03C00 PE1
D-1
Appendix D - Student Handouts
Perform Field Maintenance on Pistol Semi-Automatic 9mm M17
101-UAC03C00 / Version 01.0 ©
Sequence Media Name Media Type
| CRM LESSON PLAN REPORT |
| This lesson introduces baseline proficiencies to the Soldier trying to earn MOS 92Y, Perform Unit Level PMCS on Small Arms. The expected learning outcomes are that a Soldier will perform Preventive Check Maintenance Service on a M17 pistol. The Soldie... |
| SECTION I. ADMINISTRATIVE DATA |
| ARMY LEARNING MODEL |
| OPERATIONAL ENVIRONMENT INTEGRATION |
| SECTION II. INTRODUCTION |
| SECTION III. PRESENTATION |
| LSA 1- Clear the M17 pistol. |
| SLIDE OFF 3: |
| SLIDE 4 OFF: |
| Clearing the M17 Pistol: |
| SLIDE 5 OFF: |
| REF: TM 9-1005-470-10. |
| SLIDE 7 OFF: |
| SLIDE 8 ON: |
| LSA 2: Disassemble the M17 pistol. |
| DISASSEMBLY: |
| SLIDE 8 OFF: |
| SLIDE 9 OFF: |
| REF: TM 9-1005-470-10, pg. 0013-1. |
| SLIDE 10 OFF: |
| SLIDE 11 OFF: |
| LSA 3- Inspect the M17 pistol for serviceability. |
| Item No. Column |
| Interval Column |
| Item to be checked or serviced column |
| Procedure column |
| Not Mission Capable (NMC) if: column |
| SLIDE 13 OFF: |
| SLIDE 14 OFF: |
| SLIDE 15 OFF: |
| SLIDE 19 OFF: |
| LSA 5 Inspect for cleanliness |
| Barrel |
| Slide Assembly |
| Recoil Spring Guide Assembly |
| Receiver/Grip Module Assembly |
| Magazine |
| SLIDE 20 OFF: |
| REF: TM 9-1005-470, pg. 0013-5 & 0013-6. |
| SLIDE 21 OFF: |
| SLIDE 22 OFF: |
| LSA 6 – Lubricate with CLP. |
| Lubrication (WP 0013) |
| SLIDE 23 OFF: |
| SLIDE 24 OFF: |
| SLIDE 25 OFF: |
| LSA 7 Assemble the M17 |
| Magazine Assembly (WP 0013-12) |
| Assembly (WP 0013-12-15) |
| SLIDE 26 OFF: |
| SLIDE 28 OFF: |
| LSA 8 Preform a function check on M17. |
| Perform a Safety/Function Check (WP 0014-1 to 0014-3) |
| SECTION IV. SUMMARY |
| REF: TM 9-1005-470-10. |
| REF: TM 9-1005-470-10, pg. 0013-1. |
| REF: TM 9-1005-470-10, pg. 0013-1 |
| REF: DA Form 750-8 and TM 9-1005-470-23&P |
| REF: TM 9-1005-470, pg. 0013-5 |
| SECTION V. STUDENT EVALUATION |
| PRACTICAL EXERCISE SHEET 101-UAC03C00 PE1 |
| Title 101-92Y10D104 PRACTICAL EXERCISE |
| SOLUTION FOR |
File details come from the government source that posted it. Updated .