Amendment R0007.pdf

AMENDMENT OF SOLICITATION/MODIFICATION OF CONTRACT

Except as provided herein, all terms and conditions of the document referenced in Item 9A or 10A, as heretofore changed, remains unchanged and in full force and effect.

15A. NAME AND TITLE OF SIGNER (Type or print)

30-105-04EXCEPTION TO SF 30

APPROVED BY OIRM 11-84

STANDARD FORM 30 (Rev. 10-83) Prescribed by GSA

FAR (48 CFR) 53.243

The purpose of Amendment R0007 is to issue revisions to the SOW, remove the requirement for a bid guarantee, and provide an updated w age determination.

1. CONTRACT ID CODE PAGE OF PAGES

1 23

16A. NAME AND TITLE OF CONTRACTING OFFICER (Type or print)

16C. DATE SIGNED

BY 04-Jun-2024

16B. UNITED STATES OF AMERICA15C. DATE SIGNED15B. CONTRACTOR/OFFEROR

(Signature of Contracting Officer)(Signature of person authorized to sign)

8. NAME AND ADDRESS OF CONTRACTOR (No., Street, County, State and Zip Code) X W912DW24R0004

X 9B. DATED (SEE ITEM 11)

29-Mar-2024

10B. DATED (SEE ITEM 13)

9A. AMENDMENT OF SOLICITATION NO.

11. THIS ITEM ONLY APPLIES TO AMENDMENTS OF SOLICITATIONS

X The above numbered solicitation is amended as set forth in Item 14. The hour and date specified for receipt of Offer is extended, X is not extended.

Offer must acknowledge receipt of this amendment prior to the hour and date specified in the solicitation or as amended by one of the following methods:

(a) By completing Items 8 and 15, and returning 1 copies of the amendment; (b) By acknowledging receipt of this amendment on each copy of the offer submitted;

or (c) By separate letter or telegram which includes a reference to the solicitation and amendment numbers. FAILURE OF YOUR ACKNOWLEDGMENT TO BE RECEIVED AT THE PLACE DESIGNATED FOR THE RECEIPT OF OFFERS PRIOR TO THE HOUR AND DATE SPECIFIED MAY RESULT IN

REJECTION OF YOUR OFFER. If by virtue of this amendment you desire to change an offer already submitted, such change may be made by telegram or letter, provided each telegram or letter makes reference to the solicitation and this amendment, and is received prior to the opening hour and date specified.

12. ACCOUNTING AND APPROPRIATION DATA (If required)

13. THIS ITEM APPLIES ONLY TO MODIFICATIONS OF CONTRACTS/ORDERS.

IT MODIFIES THE CONTRACT/ORDER NO. AS DESCRIBED IN ITEM 14.

A. THIS CHANGE ORDER IS ISSUED PURSUANT TO: (Specify authority) THE CHANGES SET FORTH IN ITEM 14 ARE MADE IN THE

CONTRACT ORDER NO. IN ITEM 10A.

B. THE ABOVE NUMBERED CONTRACT/ORDER IS MODIFIED TO REFLECT THE ADMINISTRATIVE CHANGES (such as changes in paying office, appropriation date, etc.) SET FORTH IN ITEM 14, PURSUANT TO THE AUTHORITY OF FAR 43.103(B).

C. THIS SUPPLEMENTAL AGREEMENT IS ENTERED INTO PURSUANT TO AUTHORITY OF:

D. OTHER (Specify type of modification and authority)

E. IMPORTANT: Contractor is not, is required to sign this document and return copies to the issuing office.

14. DESCRIPTION OF AMENDMENT/MODIFICATION (Organized by UCF section headings, including solicitation/contract subject matter where feasible.)

10A. MOD. OF CONTRACT/ORDER NO.

2. AMENDMENT/MODIFICATION NO. 5. PROJECT NO.(If applicable)

6. ISSUED BY

3. EFFECTIVE DATE

04-Jun-2024

CODE

USA ENGINEER DISTRICT, SEATTLE

ATTN: CENWS-CT

4735 EAST MARGINAL WAY SOUTH, BLDG. 1202

SEATTLE WA 98134-2388

W912DW 7. ADMINISTERED BY (If other than item 6)

4. REQUISITION/PURCHASE REQ. NO.

CODE

See Item 6

FACILITY CODECODE

EMAIL:TEL:

W912DW24R0004

SECTION SF 30 BLOCK 14 CONTINUATION PAGE

The following items are applicable to this modification:

R0007

Summary of Changes in Amendment R0007

Note: Track changes used in the updated documents.

1. Requirement for bid guarantee is removed. 52.228-1 – Bid Guarantee is removed from 00 21 00 – Instructions.

Requirement for submission of a bid bond is removed Proposal Submission requirements in Section 00 21 16 - Instructions to Proposers.

2. 01 11 00 – STATEMENT OF WORK

Changes: Added language to PART 1 GENERAL and PART 3 EXECUTION regarding AE support for DOR responsibility. Updated 3.1.2.2 Site Safety and Health Officer reference to EM 385-1-1 to most current edition.

Corrected paragraph 3.3.7.1 Project Orientation Meeting “PPM” to “PM”. Adjusted 3.3.13.5 Competitive Pricing to clarify requirements.

3. Updated Service Wage Determination 2015-5535.

4. NOTICE TO OFFERORS: Offerors must acknowledge receipt of amendments by number and date on offer.

SUMMARY OF CHANGES

SECTION 00 21 00 - INSTRUCTIONS

The following have been deleted:

52.228-1 Bid Guarantee SEP 1996

SECTION 00 21 16 - INSTRUCTIONS TO PROPOSERS

The following have been modified:

PROPOSAL SUBMISSION

A. PROPOSAL SUBMISSIONS (SECTION 00 21 16)

For clarity, the addressed section shall reference the Solicitation. The identified sections are in accordance with (IAW) the Construction Specifications Institute (CSI) pursuant to the U.S.

Army Corps of Engineers Desk Guide (UDG) 5114.201-1.

Section 00 21 16 of the Solicitation (Request for Proposal (RFP)) contains the proposal submission instructions. Section 00 21 16 includes specific information on what must be furnished with the offer and identifies evaluation criteria that will be used in evaluating proposals received. Section 00 22 16 contains the basis of award and evaluation methods/ratings.

1. INTRODUCTION

1.1. The Solicitation is an unrestricted full and open competitive acquisition using the

Federal Acquisition Regulation (FAR) Part 36, Construction and Architect- Engineer Contracts, and FAR 15.101-1, Tradeoff Source Selection Process (i.e., Best Value Tradeoff). One solicitation will be issued for the acquisition consisting of a Request for Proposal (RFP) pursuant to FAR 15.101-2 best-value tradeoff (BVTO) source selection process to award an Integrated Design and Construction (IDaC) contract.

1.2. Pursuant to Defense Federal Acquisition Regulation Supplement (DFARS)

236.204, the magnitude of construction is over $500 million.

1.3. The primary North American Industry Classification System (NAICS) code for the acquisition is 237990 – Other Heavy and Civil Engineering Construction.

Small Business Size Standard of $45 million.

1.4. Selection will be made based on the responsible Offeror whose proposal conforms to the Solicitation requirements, demonstrating high technical capability and low risk, presenting the most advantageous offer to the Government. The Government reserves the right to accept other than the lowest-priced offer or to reject all proposals.

1.5. The Government shall not reimburse any cost incurred or associated with preparing and submitting any responses to the Solicitation. Oral explanations or instructions to Offerors are not binding. Any information given to an Offeror which impacts the Solicitation and/or offers will be provided in the form of a written amendment to the Solicitation. It is the Offeror’s responsibility to acknowledge all amendments in its proposal submission.

1.6. The Offeror shall not modify the terms and conditions of the Solicitation in their technical proposals or add conditions or qualifications to their offers. If an Offeror include terms and conditions that conflict with the terms and conditions of the Solicitation, the Offeror may be determined ineligible for award. Any questions related to specific terms and conditions contained within the Solicitation should be resolved prior to the submission of an offer.

1.7. All proposals received will be considered complete and final. The evaluation board will not consider any information or data incorporated by reference or referred to other sources outside the respective proposal volumes and factors responses. The successful Offeror will be selected solely based on the stated evaluation factors. Accordingly, proposals submitted in response to the Solicitation should provide clear, complete, concise, and straightforward responses to the evaluation factors. Elaborate proposals, color brochures, and other excesses are discouraged.

1.8. Proposals that reiterate “Parroting” the contents of the Solicitation, or contain only superficial responses, may be considered unacceptable. Evidence of experience, capability, and qualifications demonstrating and supporting the Offeror’s claims is essential. The absence of such evidence will adversely influence the evaluation of the proposal.

1.9. References to “confidential” projects cannot be submitted to demonstrate capability unless all of the information required for evaluation as specified herein can be provided to the Government as part of the Offeror’s technical proposal.

The Offeror including confidential information in its proposal that they do not want to be disclosed to the public for any purpose, or used by the Government except for evaluation purposes, shall clearly mark their proposals IAW the instructions at FAR Clause 52.215-1, Instructions to Offerors –Competitive Acquisition, paragraph (e), Restriction on disclosure and use of data.

1.10. Use of the words “shall” or “must” indicate a mandatory requirement for which failure to comply at the time and date for submission of proposals may result in the Offeror’s proposal being disqualified from consideration for the award, or a deficiency or weakness being assessed for the factor. Failure to comply with non-pricing or pricing requirements annotated with the words “should” or “may” can result in an unacceptable rating, affecting the Offeror being selected for the contract award. The Government may elect during discussions with Offerors, to provide a means by which appropriate corrections by the Offeror(s) can be made.

If stated as a number of days, time periods are calendar days unless otherwise specified.

1.11. Project Labor Agreements (PLA) Executive Order 14063, Use of Project Labor

Agreements for Federal Construction Projects, issued 04 February 2022, provides that it shall be the policy of the Federal Government to use PLAs in connection with large-scale construction projects (defined as projects where the total cost to the Federal Government of the project is at least $35 million (using appropriated funds)) to promote economy and efficiency in Federal procurement.

Offerors shall submit an offer subject to Project Labor Agreement (PLA) requirements IAW FAR 22.504, General requirements for project labor agreements. Any PLA reached pursuant to the PLA requirements in the solicitation does not change the terms of the contract or provide for any price adjustment by the Government.

2. E-BUSINESS REGISTRATION REQUIREMENTS

2.1. System for Award Management (SAM). The Offeror shall be registered in SAM at the time an offer is submitted. Failure to have an active and completed registration in SAM [https://sam.gov/] may determine an Offeror ineligible for the award and removed from the competition. A successful Offeror with incomplete or expired registrations at the time of award may not be eligible for a contract. In such instances, the Government will award to the next successful Offeror who is eligible for the award. Information contained within an Offeror’s registration shall be current and valid. The responsibility of maintaining current information contained in an Offeror’s registration rests solely on the Offeror.

2.2. Procurement Integrated Enterprise Environment (PIEE). The Offerors shall submit its proposal through the PIEE Solicitation Module [https://piee.eb.mil/].

Note: Only those with a PIEE vendor registration role as ‘Proposal Manager’ may upload an offer.

Point of Contact for Vendor Registration/Technical System issues Email:

disa.global.servicedesk.mbx.eb-ticket-requests@mail.mil | Phone: 866-618-5988

The Offerors are cautioned to log into PIEE Solicitation Module with sufficient time to ensure the electronic proposal package is completely uploaded and time-stamped in the system by the due date and time specified for receipt of proposals.

2.3. Solicitation Inquiries

All inquiries regarding the Solicitation are to be submitted via ProjNet:

https://www.projnet.org/.

Telephone and e-mail inquiries will not be accepted. ProjNet is a web-based program that allows offerors to post question regarding the Solicitation and view all question by other offerors and responses by the Government.

a. The Offerors shall only submit one question per inquiry. All inquiries containing multiple questions will be rejected.

b. The Offerors will receive an acknowledgement of its question(s) via e-mail, followed by an answer to its question(s) after it has been processed. The Offerors may view all inquiries through ProjNet.

c. Inquiries shall be submitted fourteen calendar days prior to the proposal due date. The Offerors will not be able to submit inquires after this date.

To submit and review inquiries, offerors will need to use the inquiry key presented below and follow the instructions listed below the key for access.

The Inquiry Key is: 4M4T85-UNCM3X

Specific Instructions for ProjNet inquiry access:

a. From the ProjNet home page link: https://www.projnet.org/projnet/ click on

Quick Add (upper right side of the screen).

b. Identify the Agency: This should be marked as “USACE.”

c. Key: Enter the Inquiry Key listed above.

d. E-mail: Enter the e-mail address you would like to use for communication.

e. Click Continue. A page will then open saying that a user account was not found, and it will ask you to create one using the provided form.

f. Enter your first and last name, company, city, state, phone, e-mail, secret question, secret answer, and time zone. Make sure to remember your secret question and answer, as they will be used from the point you access the ProjNet system.

g. Click Add User. Once this is completed you are now registered within ProjNet and are currently logged into the system.

2.4. Submit questions or review questions and answers. An Offeror who submits a question will receive an automated e-mail notification that its question has been received. When an answer is posted to a question, the question and answer are then available for all other offerors to review.

2.5. Pre-Proposal Conference/Site Visit. A formal site visit will be conducted. The Offerors are encouraged to visit the site prior to submitting a proposal.

2.6. Late Proposals. Any proposals, amendments, or revision received by the

Government after the exact time specified for receipt offers is “late” and will not be considered unless it is received before award is made, the KO determines that accepting the late offer would not unduly delay the acquisition, and 1) if it was transmitted through an electronic commerce method authorized by the Solicitation, and it was received at the initial point of entry to the Government infrastructure no later than 4:00 PM (Pacific Standard Time), one calendar day prior to the date specified for receipt of proposals; or 2) there is acceptable evidence to establish that it was received at the Government installation designated for receipt of offers and was under the Government’s control prior to the time set for receipt of offers; or 3) it is the only proposal received. However, a late amendment of an otherwise successful proposal that makes its terms more favorable to the Government will be considered at any time it is received and may be accepted.

2.7. Joint Venture. A joint venture (JV) is defined as a legal business entity formed between two or more companies to undertake the performance activities of a contract together. The Offerors proposing as JV shall provide evidence that the JV as a legal entity has been duly formed. The JV shall include a copy of the legal JV agreement signed by an authorized officer from each of the firms comprising the JV, with the Chief Executive of each entity identified. The Government will not evaluate the capability of any firms that are not included in the JV agreement. If submitting a proposal as a JV, the experience of each of the JV partners can be submitted for the JV entity. The experience of either JV partner will be considered the experience of the JV entity. Prospective Offerors that submit proposals may not change their JV firms, if selected for award. If an Offeror is a JV, the JV entity shall have a valid registration representing the JV as one business/firm/entity in SAM. The Government will not accept separate registrations and licenses from each separate entity representing the JV.

2.8. Subcontractor Substitutions. Approval will not be given unless the KO considers the proposed substitute equal or better in all respects to the originally proposed subcontractor and that the substitution is in the Government’s best interests. If the Offeror’s proposal includes the use of subcontractors, the Offeror may only change subcontractors with the KO approval. If the Offeror proposes to change subcontractors after award, the Offeror may not change subcontractors or Letter of Commitment (LOC) without the KO’s approval.

2.9. Unsuccessful Offerors will be notified IAW FAR Subpart 15.5. An unsuccessful offeror may request a pre-award debriefing or a delayed debriefing after award (post-award debriefing) by submitting a written request to the KO within three-calendar days after receipt of the notice excluding an offeror from the competition and award. The Offerors are entitled to no more than one debriefing for each proposal (e.g., pre- or post-award debriefing).

3. PROPOSAL VOLUME INSTRUCTIONS, REQUIREMENTS, CONTENTS, AND

FORMAT

INSTRUCTIONS TO OFFERORS

3.1. Content – General.

An Offeror’s proposal without the minimum content may be determined ineligible for award and removed from the competition. The Government will not make assumptions concerning intent, capabilities, or experiences. Clear identification of proposal details shall be the sole responsibility of the Offeror. The Government may reject incomplete proposals after initial evaluation without further consideration.

All information intended to be evaluated as part of the technical proposal shall be submitted within the technical proposal. Do not include references to material or information not found within its respective volumes. Information submitted in the wrong volumes could lead to an Offeror’s proposal being determined unacceptable if materially incomplete in any aspect.

The Government will not evaluate any material that exceeds the page limits specified within each evaluation factor. Elaborately prepared proposals are optional, and any material over what is requested, such as corporate marketing information, will not be considered.

The submission shall be clearly indexed and logically assembled. The Offeror’s proposal must set forth full, accurate, and complete information as required by the Solicitation. Absence of information will be deemed as if no support for that criterion was provided. The Offerors submitting proposals should limit submission to data essential for evaluation of proposals so that a minimum of time and money is expended in preparing information required by the Solicitation.

Penalty for making false statements in its proposal is prescribed in Title 18 United States Code (U.S.C.) Section 1001.

3.2. File Format

The Offeror’s proposal shall be submitted via electronic – Portable Document Format, filename extension “.pdf,” suitable for viewing in Adobe Reader, and text must be searchable.

3.3. Proposal Format

Cover Page: A cover page shall appear at the beginning of each volume and, at a minimum, shall consist of the following information:

a. Solicitation Number

b. The Offeror’s name, physical mailing addresses, telephone number, and email address of the official having the authority to bind the Offeror contractually.

c. The Offeror’s (if a JV provide each firm’s) Unique Entity Identifier (UEI), Commercial and Government Entity (CAGE) code, and Tax Identification Number (TIN).

Table of Contents: The Offeror shall provide a table of contents, placed in each volume, and shall identify major areas by title, volume location, and page number.

Volumes: The Offeror shall provide three separate proposal volumes: Volume I – General and Contract Documentation, Volume II – Technical Proposal, and Volume III – Cost/Price

Proposal volume organization, number of copies, and page limits. The Offeror shall prepare its proposal as set forth below. The Government will not evaluate any pages that exceed the page limitations identified in the Solicitation.

Proposal page and text formatting. Proposals shall be 8 ½” x 11” page size except for fold outs used for charts, tables or diagrams which may not exceed 11” x 17”. A page is defined as one face of a sheet of paper containing information.

Typing shall not be less than 12pt font.

VOLUM

E

TAB VOLUME TITLE

DIGITAL

COPIES

PAGE LIMIT

(Any pages over the page limit will not be reviewed)

I General and Contract Documentation

1 No limit

II

Technical Proposal

Factor 1: Construction Management Approach

20 pages, excluding the GANT Chart

2 Factor 2: Past Performance 1 15 pages Project

Descriptions, excluding CPARS and PPQs.

3 Factor 3: Pre-Construction Services 1

20 pages Pre- Construction Services Management Plan and

Design Review, excluding team resumes.

4 Factor: Small Business Commitment 1 No Limit

III Factor 5: Cost/Price 1 No Limit

Relative Importance of Evaluation Factors is in descending order Factor 1:

Construction Management Approach, Factor 2: Past Performance, Factor 3: Pre- Construction Services, and Factor 4: Small Business Commitment. The non-priced factors when combined are significantly more important than price.

***Evaluation Criteria for PLA: The PLA will not be an evaluation factor, but it will be evaluated by the Contracting Officer to ensure the PLA addresses the requirements of FAR Provision 52.222-33. The PLA must address the requirements of FAR 52.222-33 or the offer will be unacceptable for an award.

Volume I – General and Contract Documentation

Volume I shall be clearly marked “VOLUME I – SOLICITATION W912DW24R0004 – General and Contract Documentation.”

a. Signed Solicitation, Offer, and Award (Standard Form (SF) 1442) with Blocks

14 thru 20c completed, including acknowledgement of all amendments.

b. Completed Representation and Certification (Section 00 45 00)

c. A statement indicating compliance with all insurance requirements stated herein and that evidence of such will be provided after contract award.

Bid Bonds (see reference to FAR Provision 52.228-1)

d. Proof of Bonding Capability. The Offeror must provide a letter or other documentation from a surety appearing on the Department of Treasury Circular 570 (list of approved sureties) stating that the Offeror is able to obtain performance and payment bonds in at least the amount of the offered total evaluated price of the construction services appearing on the proposal schedule. Before the construction option CLIN is converted into an FFP construction CLIN, the contractor shall furnish payment and performance bonds to the KO in the amount equal to 100 percent of the final construction price.

e. A list of present commitments, including the dollar value thereof for the firm identified as the offering firm in the proposal and on the SF1442. Include names and telephone numbers of personnel within the offeror’s organization who are familiar with company’s performance. For proposing JVs, each JV partner must submit a list of present commitments.

f. Organizational Conflicts of Interest (OCI) Disclosure. The Offeror shall provide a disclosure statement with its proposal that concisely describes all the relevant facts concerning any past or present OCIs relating to the Solicitation. If applicable, in the same statement, the Offeror shall provide information to assure the Government that the conflicts of interest have been mitigated and/or neutralized to the maximum extent possible. If a conflict of interest is discovered after the award, the KO will decide on whether to terminate the contract. If no conflicts of interest exist, the Offeror shall provide a statement stating no Conflicts of Interest exist.

g. Financial Statement. Submit a copy of your most recent financial statements.

The statements must include a Balance Sheet and Income Statement. Include the names of banks or other financial institutions with which business is conducted (mailing addresses, points of contact and phone number). If the financial statements are more than 60 days old, attach a certificate stating that the financial condition is substantially the same, or if not the same, describe the changes which have taken place since the financial statements were prepared. If submitting a financial statement for a parent company with a different name than the proposing entity, the offer shall include a written statement detailing the relationship between the parent company and the proposing entity and substantiating that the financial statements relate to the financial capacity of the proposing firm.

h. Bank Letters. Provide evidence of adequate financing arrangements, such as commitments from lending institutions, etc., to perform this contract. Include the names of banks or other financial institutions where business is conducted (mailing addresses, points of contact, and phone numbers). Reference letters should include the following information: (1) the date the Offeror’s account was opened with the financial institution, (2) the average balance for the last 12 months on the Offeror’s account (i.e., balance in the xx digits), (3) if there is a credit line established with the financial institution, what is the credit amount and how much is available at this time? If not, would the financial institution be willing to establish a line of credit for the Offeror? And if so, for how much (i.e., low xx figure range), (4) how does the financial institution evaluate the Offeror as a customer (i.e., poor, fair, very good, excellent, etc.), and (5) the financial institution should declare whether the Offeror’s account is in good standings. This information will be treated confidentially but may be checked for verification.

i. Project Labor Agreements. All Offerors are required to submit a complete and signed Project Labor Agreement (PLA) for evaluation by the Contracting Officer. Any PLA submitted with the offer must comply with the requirements of FAR Provision 52.222-33. (A PLA is defined as a pre-hire collective bargaining agreement with one or more labor organizations that establishes the terms and conditions of employment for a specific construction project and is an agreement described in 29 U.S.C. 158(f)).

Volume II – Technical Proposal

Volume II shall be clearly marked “VOLUME II – SOLICITATION W912DW24R0004 – Technical Proposal.”

Volume III – Cost/Price

Volume III shall be clearly marked “VOLUME III – SOLICITATION W912DW24R0004 – Cost/Price.”

SECTION 00 73 00 - SUPPLEMENTARY CONDITIONS

The following have been modified:

WD CLIN 0001: SERVICES

REGISTER OF WAGE DETERMINATIONS UNDER | U.S. DEPARTMENT OF LABOR

THE SERVICE CONTRACT ACT | EMPLOYMENT STANDARDS ADMINISTRATION

By direction of the Secretary of Labor | WAGE AND HOUR DIVISION

| WASHINGTON D.C. 20210

| Wage Determination No.: 2015-5535 Daniel W. Simms Division of | Revision No.: 22 Director Wage Determinations| Date Of Last Revision: 05/02/2024

Note: Contracts subject to the Service Contract Act are generally required to pay at least the applicable minimum wage rate required under Executive Order 14026 or Executive Order 13658.

|If the contract is entered into on or |Executive Order 14026 generally applies to | |after January 30, 2022, or the |the contract. | |contract is renewed or extended (e.g., |The contractor must pay all covered workers | |an option is exercised) on or after |at least $17.20 per hour (or the applicable | |January 30, 2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. | |If the contract was awarded on or |Executive Order 13658 generally applies to | |between January 1, 2015 and January 29,|the contract. | |2022, and the contract is not renewed |The contractor must pay all covered workers | |or extended on or after January 30, |at least $12.90 per hour (or the applicable | |2022: |wage rate listed on this wage determination,| | |if it is higher) for all hours spent | | |performing on the contract in 2024. |

The applicable Executive Order minimum wage rate will be adjusted annually. Additional information on contractor requirements and worker protections under the Executive Orders is available at www.dol.gov/whd/govcontracts.

State: Washington

Area: Washington Counties of King, Snohomish

**Fringe Benefits Required Follow the Occupational Listing**

OCCUPATION CODE - TITLE FOOTNOTE RATE

01000 - Administrative Support And Clerical Occupations 01011 - Accounting Clerk I 21.58 01012 - Accounting Clerk II 24.23

01013 - Accounting Clerk III 27.10 01020 - Administrative Assistant 38.78 01035 - Court Reporter 27.36 01041 - Customer Service Representative I 19.65 01042 - Customer Service Representative II 21.44 01043 - Customer Service Representative III 24.06 01051 - Data Entry Operator I 20.28 01052 - Data Entry Operator II 22.13 01060 - Dispatcher, Motor Vehicle 27.92 01070 - Document Preparation Clerk 19.92 01090 - Duplicating Machine Operator 19.92 01111 - General Clerk I 19.96 01112 - General Clerk II 21.78 01113 - General Clerk III 24.44 01120 - Housing Referral Assistant 28.26 01141 - Messenger Courier 21.10 01191 - Order Clerk I 21.50 01192 - Order Clerk II 23.46 01261 - Personnel Assistant (Employment) I 22.93 01262 - Personnel Assistant (Employment) II 25.65 01263 - Personnel Assistant (Employment) III 28.60 01270 - Production Control Clerk 31.20 01290 - Rental Clerk 21.33 01300 - Scheduler, Maintenance 24.46 01311 - Secretary I 24.46 01312 - Secretary II 27.36 01313 - Secretary III 30.50 01320 - Service Order Dispatcher 24.96 01410 - Supply Technician 38.78 01420 - Survey Worker 24.15 01460 - Switchboard Operator/Receptionist 20.34 01531 - Travel Clerk I 24.24 01532 - Travel Clerk II 27.21 01533 - Travel Clerk III 30.24 01611 - Word Processor I 20.58 01612 - Word Processor II 23.10 01613 - Word Processor III 25.84 05000 - Automotive Service Occupations 05005 - Automobile Body Repairer, Fiberglass 27.31 05010 - Automotive Electrician 28.01 05040 - Automotive Glass Installer 26.82 05070 - Automotive Worker 26.82 05110 - Mobile Equipment Servicer 23.93 05130 - Motor Equipment Metal Mechanic 28.98 05160 - Motor Equipment Metal Worker 26.82 05190 - Motor Vehicle Mechanic 28.98 05220 - Motor Vehicle Mechanic Helper 22.50 05250 - Motor Vehicle Upholstery Worker 25.40 05280 - Motor Vehicle Wrecker 26.82 05310 - Painter, Automotive 28.01 05340 - Radiator Repair Specialist 26.82 05370 - Tire Repairer 19.94 05400 - Transmission Repair Specialist 28.98 07000 - Food Preparation And Service Occupations 07010 - Baker 20.59 07041 - Cook I 23.13 07042 - Cook II 25.92 07070 - Dishwasher 18.76 07130 - Food Service Worker 20.23 07210 - Meat Cutter 26.26 07260 - Waiter/Waitress 20.10 09000 - Furniture Maintenance And Repair Occupations

09010 - Electrostatic Spray Painter 27.35 09040 - Furniture Handler 17.88 09080 - Furniture Refinisher 22.58 09090 - Furniture Refinisher Helper 19.16 09110 - Furniture Repairer, Minor 20.52 09130 - Upholsterer 27.35 11000 - General Services And Support Occupations 11030 - Cleaner, Vehicles 18.61 11060 - Elevator Operator 19.46 11090 - Gardener 28.16 11122 - Housekeeping Aide 20.22 11150 - Janitor 20.22 11210 - Laborer, Grounds Maintenance 23.07 11240 - Maid or Houseman 19.04 11260 - Pruner 21.35 11270 - Tractor Operator 26.47 11330 - Trail Maintenance Worker 23.07 11360 - Window Cleaner 21.85 12000 - Health Occupations 12010 - Ambulance Driver 30.49 12011 - Breath Alcohol Technician 33.02 12012 - Certified Occupational Therapist Assistant 34.31 12015 - Certified Physical Therapist Assistant 34.72 12020 - Dental Assistant 27.10 12025 - Dental Hygienist 58.42 12030 - EKG Technician 39.08 12035 - Electroneurodiagnostic Technologist 39.08 12040 - Emergency Medical Technician 30.49 12071 - Licensed Practical Nurse I 29.51 12072 - Licensed Practical Nurse II 33.02 12073 - Licensed Practical Nurse III 36.81 12100 - Medical Assistant 27.83 12130 - Medical Laboratory Technician 33.05 12160 - Medical Record Clerk 27.80 12190 - Medical Record Technician 31.09 12195 - Medical Transcriptionist 22.98 12210 - Nuclear Medicine Technologist 61.67 12221 - Nursing Assistant I 16.01*** 12222 - Nursing Assistant II 18.00 12223 - Nursing Assistant III 19.64 12224 - Nursing Assistant IV 22.03 12235 - Optical Dispenser 26.47 12236 - Optical Technician 24.24 12250 - Pharmacy Technician 26.65 12280 - Phlebotomist 24.13 12305 - Radiologic Technologist 44.09 12311 - Registered Nurse I 29.73 12312 - Registered Nurse II 36.37 12313 - Registered Nurse II, Specialist 36.37 12314 - Registered Nurse III 44.00 12315 - Registered Nurse III, Anesthetist 44.00 12316 - Registered Nurse IV 52.74 12317 - Scheduler (Drug and Alcohol Testing) 40.91 12320 - Substance Abuse Treatment Counselor 28.74 13000 - Information And Arts Occupations 13011 - Exhibits Specialist I 23.97 13012 - Exhibits Specialist II 28.84 13013 - Exhibits Specialist III 35.28 13041 - Illustrator I 27.11 13042 - Illustrator II 33.60 13043 - Illustrator III 41.08 13047 - Librarian 48.41

13050 - Library Aide/Clerk 20.12 13054 - Library Information Technology Systems 43.71 Administrator 13058 - Library Technician 29.25 13061 - Media Specialist I 31.54 13062 - Media Specialist II 35.28 13063 - Media Specialist III 39.35 13071 - Photographer I 21.46 13072 - Photographer II 24.00 13073 - Photographer III 29.74 13074 - Photographer IV 36.37 13075 - Photographer V 44.01 13090 - Technical Order Library Clerk 25.26 13110 - Video Teleconference Technician 35.00 14000 - Information Technology Occupations 14041 - Computer Operator I 28.59 14042 - Computer Operator II 31.98 14043 - Computer Operator III 35.66 14044 - Computer Operator IV 39.62 14045 - Computer Operator V 43.88 14071 - Computer Programmer I (see 1) 14072 - Computer Programmer II (see 1) 14073 - Computer Programmer III (see 1) 14074 - Computer Programmer IV (see 1) 14101 - Computer Systems Analyst I (see 1) 14102 - Computer Systems Analyst II (see 1) 14103 - Computer Systems Analyst III (see 1) 14150 - Peripheral Equipment Operator 28.59 14160 - Personal Computer Support Technician 39.62 14170 - System Support Specialist 43.88 15000 - Instructional Occupations 15010 - Aircrew Training Devices Instructor (Non-Rated) 44.24 15020 - Aircrew Training Devices Instructor (Rated) 53.53 15030 - Air Crew Training Devices Instructor (Pilot) 64.15 15050 - Computer Based Training Specialist / Instructor 44.24 15060 - Educational Technologist 42.30 15070 - Flight Instructor (Pilot) 64.15 15080 - Graphic Artist 35.95 15085 - Maintenance Test Pilot, Fixed, Jet/Prop 64.15 15086 - Maintenance Test Pilot, Rotary Wing 64.15 15088 - Non-Maintenance Test/Co-Pilot 64.15 15090 - Technical Instructor 33.84 15095 - Technical Instructor/Course Developer 41.39 15110 - Test Proctor 27.31 15120 - Tutor 27.31 16000 - Laundry, Dry-Cleaning, Pressing And Related Occupations 16010 - Assembler 21.92 16030 - Counter Attendant 21.92 16040 - Dry Cleaner 25.04 16070 - Finisher, Flatwork, Machine 21.92 16090 - Presser, Hand 21.92 16110 - Presser, Machine, Drycleaning 21.92 16130 - Presser, Machine, Shirts 21.92 16160 - Presser, Machine, Wearing Apparel, Laundry 21.92 16190 - Sewing Machine Operator 26.08 16220 - Tailor 27.12 16250 - Washer, Machine 22.96 19000 - Machine Tool Operation And Repair Occupations 19010 - Machine-Tool Operator (Tool Room) 39.42 19040 - Tool And Die Maker 44.65 21000 - Materials Handling And Packing Occupations 21020 - Forklift Operator 23.96

21030 - Material Coordinator 31.20 21040 - Material Expediter 31.20 21050 - Material Handling Laborer 21.57 21071 - Order Filler 20.70 21080 - Production Line Worker (Food Processing) 23.96 21110 - Shipping Packer 23.67 21130 - Shipping/Receiving Clerk 23.67 21140 - Store Worker I 20.90 21150 - Stock Clerk 26.38 21210 - Tools And Parts Attendant 23.96 21410 - Warehouse Specialist 23.96 23000 - Mechanics And Maintenance And Repair Occupations 23010 - Aerospace Structural Welder 42.17 23019 - Aircraft Logs and Records Technician 35.79 23021 - Aircraft Mechanic I 40.84 23022 - Aircraft Mechanic II 42.17 23023 - Aircraft Mechanic III 43.41 23040 - Aircraft Mechanic Helper 31.71 23050 - Aircraft, Painter 39.48 23060 - Aircraft Servicer 35.79 23070 - Aircraft Survival Flight Equipment Technician 39.48 23080 - Aircraft Worker 37.81 23091 - Aircrew Life Support Equipment (ALSE) Mechanic 37.81 I 23092 - Aircrew Life Support Equipment (ALSE) Mechanic 40.84

II

23110 - Appliance Mechanic 28.86 23120 - Bicycle Repairer 23.05 23125 - Cable Splicer 56.81 23130 - Carpenter, Maintenance 34.65 23140 - Carpet Layer 30.00 23160 - Electrician, Maintenance 45.36 23181 - Electronics Technician Maintenance I 41.26 23182 - Electronics Technician Maintenance II 43.09 23183 - Electronics Technician Maintenance III 44.58 23260 - Fabric Worker 35.02 23290 - Fire Alarm System Mechanic 32.49 23310 - Fire Extinguisher Repairer 32.09 23311 - Fuel Distribution System Mechanic 45.62 23312 - Fuel Distribution System Operator 37.68 23370 - General Maintenance Worker 27.43 23380 - Ground Support Equipment Mechanic 40.84 23381 - Ground Support Equipment Servicer 35.79 23382 - Ground Support Equipment Worker 37.81 23391 - Gunsmith I 32.09 23392 - Gunsmith II 35.96 23393 - Gunsmith III 38.85 23410 - Heating, Ventilation And Air-Conditioning 36.29 Mechanic 23411 - Heating, Ventilation And Air Contidioning 37.47 Mechanic (Research Facility) 23430 - Heavy Equipment Mechanic 36.24 23440 - Heavy Equipment Operator 41.93 23460 - Instrument Mechanic 34.90 23465 - Laboratory/Shelter Mechanic 37.56 23470 - Laborer 21.57 23510 - Locksmith 31.32 23530 - Machinery Maintenance Mechanic 35.83 23550 - Machinist, Maintenance 31.84 23580 - Maintenance Trades Helper 23.03 23591 - Metrology Technician I 34.90 23592 - Metrology Technician II 36.04

23593 - Metrology Technician III 37.09 23640 - Millwright 42.31 23710 - Office Appliance Repairer 28.49 23760 - Painter, Maintenance 25.98 23790 - Pipefitter, Maintenance 40.01 23810 - Plumber, Maintenance 38.68 23820 - Pneudraulic Systems Mechanic 38.85 23850 - Rigger 37.11 23870 - Scale Mechanic 35.96 23890 - Sheet-Metal Worker, Maintenance 45.74 23910 - Small Engine Mechanic 26.14 23931 - Telecommunications Mechanic I 35.22 23932 - Telecommunications Mechanic II 36.36 23950 - Telephone Lineman 37.27 23960 - Welder, Combination, Maintenance 30.15 23965 - Well Driller 35.49 23970 - Woodcraft Worker 38.85 23980 - Woodworker 32.09 24000 - Personal Needs Occupations 24550 - Case Manager 23.09 24570 - Child Care Attendant 18.82 24580 - Child Care Center Clerk 23.48 24610 - Chore Aide 20.28 24620 - Family Readiness And Support Services 23.09 Coordinator 24630 - Homemaker 23.09 25000 - Plant And System Operations Occupations 25010 - Boiler Tender 41.53 25040 - Sewage Plant Operator 40.41 25070 - Stationary Engineer 41.53 25190 - Ventilation Equipment Tender 32.24 25210 - Water Treatment Plant Operator 40.41 27000 - Protective Service Occupations 27004 - Alarm Monitor 37.42 27007 - Baggage Inspector 19.50 27008 - Corrections Officer 38.23 27010 - Court Security Officer 41.11 27030 - Detection Dog Handler 22.54 27040 - Detention Officer 38.23 27070 - Firefighter 46.75 27101 - Guard I 19.50 27102 - Guard II 22.54 27131 - Police Officer I 47.24 27132 - Police Officer II 52.49 28000 - Recreation Occupations 28041 - Carnival Equipment Operator 21.87 28042 - Carnival Equipment Repairer 23.27 28043 - Carnival Worker 17.64 28210 - Gate Attendant/Gate Tender 25.26 28310 - Lifeguard 17.58 28350 - Park Attendant (Aide) 28.26 28510 - Recreation Aide/Health Facility Attendant 20.63 28515 - Recreation Specialist 35.01 28630 - Sports Official 22.51 28690 - Swimming Pool Operator 26.08 29000 - Stevedoring/Longshoremen Occupational Services 29010 - Blocker And Bracer 42.49 29020 - Hatch Tender 42.49 29030 - Line Handler 42.49 29041 - Stevedore I 40.23 29042 - Stevedore II 44.36 30000 - Technical Occupations

30010 - Air Traffic Control Specialist, Center (HFO) (see 2) 50.62 30011 - Air Traffic Control Specialist, Station (HFO) (see 2) 34.91 30012 - Air Traffic Control Specialist, Terminal (HFO) (see 2) 38.44 30021 - Archeological Technician I 22.27 30022 - Archeological Technician II 24.91 30023 - Archeological Technician III 30.86 30030 - Cartographic Technician 30.86 30040 - Civil Engineering Technician 40.06 30051 - Cryogenic Technician I 30.30 30052 - Cryogenic Technician II 33.47 30061 - Drafter/CAD Operator I 22.27 30062 - Drafter/CAD Operator II 24.91 30063 - Drafter/CAD Operator III 27.78 30064 - Drafter/CAD Operator IV 34.17 30081 - Engineering Technician I 20.07 30082 - Engineering Technician II 22.53 30083 - Engineering Technician III 25.20 30084 - Engineering Technician IV 31.22 30085 - Engineering Technician V 38.19 30086 - Engineering Technician VI 46.21 30090 - Environmental Technician 28.91 30095 - Evidence Control Specialist 27.36 30210 - Laboratory Technician 27.78 30221 - Latent Fingerprint Technician I 35.15 30222 - Latent Fingerprint Technician II 38.83 30240 - Mathematical Technician 37.35 30361 - Paralegal/Legal Assistant I 25.05 30362 - Paralegal/Legal Assistant II 31.04 30363 - Paralegal/Legal Assistant III 37.97 30364 - Paralegal/Legal Assistant IV 45.93 30375 - Petroleum Supply Specialist 33.47 30390 - Photo-Optics Technician 30.86 30395 - Radiation Control Technician 33.47 30461 - Technical Writer I 33.56 30462 - Technical Writer II 41.05 30463 - Technical Writer III 49.66 30491 - Unexploded Ordnance (UXO) Technician I 32.17 30492 - Unexploded Ordnance (UXO) Technician II 38.93 30493 - Unexploded Ordnance (UXO) Technician III 46.66 30494 - Unexploded (UXO) Safety Escort 32.17 30495 - Unexploded (UXO) Sweep Personnel 32.17 30501 - Weather Forecaster I 34.17 30502 - Weather Forecaster II 41.57 30620 - Weather Observer, Combined Upper Air Or (see 2) 24.63 Surface Programs 30621 - Weather Observer, Senior (see 2) 27.77 31000 - Transportation/Mobile Equipment Operation Occupations 31010 - Airplane Pilot 38.93 31020 - Bus Aide 29.08 31030 - Bus Driver 37.67 31043 - Driver Courier 21.66 31260 - Parking and Lot Attendant 19.17 31290 - Shuttle Bus Driver 21.85 31310 - Taxi Driver 18.89 31361 - Truckdriver, Light 23.04 31362 - Truckdriver, Medium 24.45 31363 - Truckdriver, Heavy 30.51 31364 - Truckdriver, Tractor-Trailer 30.51 99000 - Miscellaneous Occupations 99020 - Cabin Safety Specialist 18.98 99030 - Cashier 18.04 99050 - Desk Clerk 19.06

99095 - Embalmer 30.25 99130 - Flight Follower 32.17 99251 - Laboratory Animal Caretaker I 20.28 99252 - Laboratory Animal Caretaker II 21.58 99260 - Marketing Analyst 49.07 99310 - Mortician 30.39 99410 - Pest Controller 28.20 99510 - Photofinishing Worker 27.60 99710 - Recycling Laborer 36.83 99711 - Recycling Specialist 42.27 99730 - Refuse Collector 34.09 99810 - Sales Clerk 18.31 99820 - School Crossing Guard 22.88 99830 - Survey Party Chief 37.14 99831 - Surveying Aide 21.30 99832 - Surveying Technician 29.20 99840 - Vending Machine Attendant 20.28 99841 - Vending Machine Repairer 23.93 99842 - Vending Machine Repairer Helper 20.28

***Workers in this classification may be entitled to a higher minimum wage under Executive Order 14026 ($17.20 per hour) or 13658 ($12.90 per hour). Please see the Note at the top of the wage determination for more information. Please also note that the minimum wage requirements of Executive Order 14026 and 13658 are not currently being enforced as to contracts or contract-like instruments entered into with the federal government in connection with seasonal recreational services or seasonal recreational equipment rental for the general public on federal lands. The minimum wage requirements of Executive Order 14026 also are not currently being enforced as to any contract or subcontract to which the states of Texas, Louisiana, or Mississippi, including their agencies, are a party.

Note: Executive Order (EO) 13706, Establishing Paid Sick Leave for Federal Contractors, applies to all contracts subject to the Service Contract Act for which the contract is awarded (and any solicitation was issued) on or after January 1, 2017. If this contract is covered by the EO, the contractor must provide employees with 1 hour of paid sick leave for every 30 hours they work, up to 56 hours of paid sick leave each year. Employees must be permitted to use paid sick leave for their own illness, injury or other health-related needs, including preventive care; to assist a family member (or person who is like family to the employee) who is ill, injured, or has other health-related needs, including preventive care; or for reasons resulting from, or to assist a family member (or person who is like family to the employee) who is the victim of, domestic violence, sexual assault, or stalking. Additional information on contractor requirements and worker protections under the EO is available at www.dol.gov/whd/govcontracts.

ALL OCCUPATIONS LISTED ABOVE RECEIVE THE FOLLOWING BENEFITS:

HEALTH & WELFARE: $4.98 per hour, up to 40 hours per week, or $199.20 per week or $863.20 per month

HEALTH & WELFARE EO 13706: $4.57 per hour, up to 40 hours per week, or $182.80 per week, or $792.13 per month*

*This rate is to be used only when compensating employees for performance on an SCA-covered contract also covered by EO 13706, Establishing Paid Sick Leave for Federal Contractors. A contractor may not receive credit toward its SCA obligations for any paid sick leave provided pursuant to EO 13706.

VACATION: 2 weeks paid vacation after 1 year of service with a contractor or successor, 3 weeks after 5 years, and 4 weeks after 15 years. Length of service includes the whole span of continuous service with the present contractor or successor, wherever employed, and with the predecessor contractors in the performance of similar work at the same Federal facility. (Reg. 29 CFR 4.173)

HOLIDAYS: A minimum of eleven paid holidays per year: New Year's Day, Martin Luther King Jr.'s Birthday, Washington's Birthday, Memorial Day, Juneteenth National Independence Day, Independence Day, Labor Day, Columbus Day, Veterans' Day, Thanksgiving Day, and Christmas Day. (A contractor may substitute for any of the named holidays another day off with pay in accordance with a plan communicated to the employees involved.) (See 29 CFR 4.174)

THE OCCUPATIONS WHICH HAVE NUMBERED FOOTNOTES IN PARENTHESES RECEIVE THE FOLLOWING:

1) COMPUTER EMPLOYEES: This wage determination does not apply to any individual employed in a bona fide executive, administrative, or professional capacity, as defined in 29 C.F.R. Part 541. (See 41 C.F.R. 6701(3)). Because most Computer Systems Analysts and Computer Programmers who are paid at least $27.63 per hour (or at least $684 per week if paid on a salary or fee basis) likely qualify as exempt computer professionals under 29 U.S.C. 213(a)(1) and 29 U.S.C. 213(a)(17), this wage determination may not include wage rates for all occupations within those job families. In such instances, a conformance will be necessary if there are nonexempt employees in these job families working on the contract.

Job titles vary widely and change quickly in the computer industry, and are not determinative of whether an employee is an exempt computer professional. To be exempt, computer employees who satisfy the compensation requirements must also have a primary duty that consists of:

(1) The application of systems analysis techniques and procedures, including consulting with users, to determine hardware, software or system functional specifications;

(2) The design, development, documentation, analysis, creation, testing or modification of computer systems or programs, including prototypes, based on and related to user or system design specifications;

(3) The design, documentation, testing, creation or modification of computer programs related to machine operating systems; or

(4) A combination of the aforementioned duties, the performance of which requires the same level of skills. (29 C.F.R. 541.400).

Any computer employee who meets the applicable compensation requirements and the above duties test qualifies as an exempt computer professional under both section 13(a)(1) and section 13(a)(17) of the Fair Labor Standards Act. (Field Assistance Bulletin No. 2006-3 (Dec. 14, 2006)). Accordingly, this wage determination will not apply to any exempt computer employee regardless of which of these two exemptions is utilized.

2) AIR TRAFFIC CONTROLLERS AND WEATHER OBSERVERS - NIGHT PAY & SUNDAY PAY: If you work at night as part of a regular tour of duty, you will earn a night differential and receive an additional 10% of basic pay for any hours worked between 6pm and 6am.

If you are a full-time employed (40 hours a week) and Sunday is part of your regularly scheduled workweek, you are paid at your rate of basic pay plus a Sunday premium of 25% of your basic rate for each hour of Sunday work which is not overtime (i.e. occasional work on Sunday outside the normal tour of duty is considered overtime work).

** HAZARDOUS PAY DIFFERENTIAL **

An 8 percent differential is applicable to employees employed in a position that represents a high degree of hazard when working with or in close proximity to ordnance, explosives, and incendiary materials. This includes work such as screening, blending, dying, mixing, and pressing of sensitive ordnance, explosives, and pyrotechnic compositions such as lead azide, black powder and photoflash powder.

All dry-house activities involving propellants or explosives. Demilitarization, modification, renovation, demolition, and maintenance operations on sensitive ordnance, explosives and incendiary materials. All operations involving re-grading and cleaning of artillery ranges.

A 4 percent differential is applicable to employees employed in a position that represents a low degree of hazard when working with, or in close proximity to ordnance, (or employees possibly adjacent to) explosives and incendiary materials which involves potential injury such as laceration of hands, face, or arms of the employee engaged in the…