I.A.07_Attachment__9_[OPSEC_and_Anti-Terrorism]_11MAY17.pdf

Antiterrorism (AT) and Operations Security (OPSEC)

1.0 AT Level I Training: This provision/contract text is for contractor employees with an area of performance within an Army controlled installation, facility, or area. All contractor employees, to include subcontractor employees, requiring access to Army installations, facilities, and controlled access areas shall complete AT Level I awareness training within 30 calendar days after contract start date and within 30 calendar days after the start date of each option period.

The contractor shall submit certificates of completion for each affected contractor employee and subcontractor employee to the GPM AT level 1 training is an annual requirement if option years are recognized.

2.0 Access and General Protection/Security Policy and Procedures: This standard language text is for contractor employees with an area of performance within an Army controlled installation, facility, or area. Contractor and all associated sub-contractors’ employees shall comply with applicable installation, facility, and area commander installation/facility access and local security policies and procedures (provided by government representative). The contractor shall also provide all information required for background checks to meet installation access requirements to be accomplished by installation Provost Marshall Office, Director of Emergency Services, or Security Office. Contractor workforce must comply with all personal identity verification requirements as directed by DOD, HQDA, and/or local policy. In addition to the changes otherwise authorized by the changes clause of this contract, should the Force Protection Condition (FPCON) at any individual facility or installation change, the Government may require changes in contractor security matters or processes.

2.1 Installation Access

2.1.1 Fort Campbell applies the following non-Federal Government cardholder criteria to determine the authorized type of access control credentials:

a. Contractors RAPID Gate or 1-Day Pass

b. Sub-Contractors RAPID Gate or 1-Day Pass

c. Vendors RAPID Gate or 1-Day Pass

d. Suppliers RAPID Gate or 1-Day Pass

e. Service Providers RAPID Gate or 1-Day Pass

f. Visitors (Case-by-Case Basis) : 1-Day Pass

g. Privatized Business Partners: Air Assault Card

(The following are Privatized Business Partners: IHG, Campbell Crossing, and University/College faculty, Fort Campbell Credit Union, Bank of America and Home Health Care)

2.1.2 Personnel requiring access to two or more DoD-controlled installations/facilities on a recurring basis for a period of 6 months or more; OR an individual requiring both access to a DoD-controlled installation/facility and onsite/remote access to DoD or Army controlled information networks on behalf of the Army REQUIRE a favorable NACI background investigation. Buildings or activities where special security measures (i.e., Controlled Access Areas) are employed may be considered a “separate facility” from the installation, in accordance with the determination of the command leadership for the particular building/activity

a. Initial issuance of a CAC requires the completion of a Federal Bureau of Investigation (FBI) fingerprint check with favorable results and the successful submission of a National Agency Check with Inquiries (NACI) (equivalent or higher) background investigation to the Army’s investigative service provider, the U.S. Office of Personnel Management (OPM), via the U.S. Army Personnel Security Investigation Center of Excellence.

i. To process the NACI, a Background Investigation Worksheet, (FC FM 255), and proof of citizenship is required. The following are the only documents allowed for citizenship verification: birth certificate, certificate of citizenship-INS, certificate of naturalization, certification of birth-Form DS-1350, certification of birth-Form FS-545, passport and the report of birth abroad-Form FS-240.

ii. The Contracting Officer’s Representative (COR) is responsible for completion and submission of the “Initiation Packet” consisting of each individuals completed FC FM 255 and citizenship documentation.

iii. The COR submits the completed packet to the DPTMS Security & Intelligence Division (SID) for review. Following review by the SID, the COR will be contacted by the SID to have the individual make an appointment for fingerprinting. At the appointment, the SID representative will verify the information provided by the individual, take and submit digital fingerprints, and explain the remaining process.

b. After the contractor's appointment with SID, Fort Campbell Installation Access Control will issue the individual a 30 day installation pass to allow for processing of the NACI background investigation. The NCIC III must be favorable prior to issuance of the 30 day pass.

2.1.3 Contractor personnel who are ineligible for a Common Access card (CAC) will be required to either obtain daily visitors pass or participate in the RAPID Gate Program. RAPID Gate is a voluntary program due to associated costs.

RAPID Gate Credential Holders

Vendors, suppliers, contractors, sub-contractors and service providers with RAPID Gate credentials may enter the installation operating single rear axle small to medium vehicles through any Access Control Point (ACP). Single axle trailers may be towed by RAPID Gate ID card holders that are operating small to medium vehicles through the above mentioned ACPs.

RAPID Gate credential holders operating large multiple rear axle commercial vehicles or towing multiple axle trailers of any type are required to access the installation through ACP 7 or ACP

10. A large commercial vehicle is generally greater than 27 feet in length (cab and cargo area), generally has multiple rear axles and is designed for large load transportation and delivery.

Examples include, but are not limited to: semi-trailers, delivery trucks, heavy equipment movers and other vehicles of similar size, shape or design.

Non-RAPID Gate Credential Holders

Vendors, suppliers, contractors, sub-contractors and service providers operating small to medium single rear axle privately owned passenger type vehicles may obtain a one day pass at the Gate 4 or Gate 7 Visitor Control Center. Hours of operation are 0500-2100, seven days a week. Personnel operating the abovementioned vehicles may use the one day pass for access at any ACP. All occupants of the vehicle must have either a one day pass or an installation approved DOD issued identification card. All visitors and contractors will be vetted with an NCIC III check.

Vendors, suppliers, contractors, sub-contractors and service providers operating commercial vehicles or towing trailers of any type may obtain a one day pass at the Gate 7 Commercial Vehicle Inspection checkpoint. The Gate 7 Commercial Vehicle Inspection checkpoint is operational 24 hrs. a day, seven days a week. Personnel operating the abovementioned vehicles may only enter the installation at the Gate 7 Commercial Vehicle Inspection checkpoint. All occupants of the vehicle must have either a one day pass or an installation approved DOD issued identification card. Contractors should expect delays with commercial trucks entering via this gate as vehicles might be subject to physical inspections.

Access procedures for all personnel may change at any time due to installation security requirements.

2.1.4 Access rosters for Restricted Areas: Access rosters for Restricted Areas shall be provided when required. The rosters shall be provided electronically to the COR on the format provided by the Government. Rosters shall be provided at least 72 business hours prior to commencement of work and again as personnel changes are made. At time of award, access rosters are required for Ammunition Supply Point (ASP), CAAF, Sabre, and 160th.

2.1.5 RESERVED

2.1.6 iWATCH Training: This standard language is for contractor employees with an area of performance within an Army controlled installation, facility or area. The contractor and all associated sub-contractors shall brief all employees on the local iWATCH program (training standards provided by the requiring activity ATO). This local developed training will be used to inform employees of the types of behavior to watch for and instruct employees to report suspicious activity to the COR. This training shall be completed within 15 calendar days of contract award, and within 5 calendar days of new employees being hired. Contractor shall submit a list of personnel trained to the GPM.