Q33_Tankless_Water_Heater_for_EEW.pdf

Complies with

Standards for:

17451 Hurley St. :: City of Industry, CA 91744 Phone 800-447-4962 :: 626-937-4270

Fax 626-937-4279 :: www.chronomite.com

Since 1966

Chronomite Laboratories is a member of Acorn Engineering’s Family of Companies

APPLICATION: EYEWASH

IDEAL for

• Anywhere the eyes/face may be exposed to injurious corrosive material

• Heater to supply “tepid” warm water (at 70°-90°F) with inlet temperature range 50°-84°F according to ANSI Z358.1

• Industrial

• Schools, colleges & universities

• Swimming pool facilities (high chlorine levels)

Member of U.S. Green Building Council

Water Conserving Product

Made in the USA

APPL-EW 11/23/10

* 240 volt may be operated at 220V.

However, an approximate 15% decrease in temperature will be experienced.

** 84°F is an ideal temperature for eyewash application

INSTANT-TEMP® - (2.2 GPM)INSTANT-FLOW® MICRO (2.2 GPM)

MICROPROCESSOR MODELSMICROPROCESSOR MODELS

MODEL

BREAKER

SIZE

(AMPS) VOLTS WATTS

PRESET

TEMP.

E-80EW/208 40 208 8,000 84°F

E-90EW/240 50 240* 9,000 84°F

E-90EW/277 40 277 9,000 84°F

MODEL

BREAKER

SIZE

(AMPS) VOLTS WATTS

PRESET

TEMP.

M-40EW/208 40 208 8,320 84°F

M-40EW/240 40 240* 9,600 84°F

M-40EW/277 40 277 11,080 84°F

M-50EW/240 50 240* 11,520 84°F

StampeJJ Highlight

Standards for:

17451 Hurley St. :: City of Industry, CA 91744 Phone 800-447-4962 :: 626-937-4270

Fax 626-937-4279 :: www.chronomite.com

Since 1966

Chronomite Laboratories is a member of Acorn Engineering’s Family of Companies

APPLICATION: EYEWASH

Member of U.S. Green Building Council

Water Conserving Product

Made in the USA

APPL-EW 11/23/10

INSTANT-FLOW® MICRO

(2.2 GPM FLOW RATE)

Dimension:

6-1/4” (H) x 9-5/8” x 2-3/4” Weight: 5 lbs Material: Stainless steel housing;

Celcon plastic element assembly with nichrome coils.

Microprocessor Controlled: YES Min. Operating Flow: 2.2 GPM Operating Pressure: Minimum 45 PSI / Maximum 150 PSI Max. Operating Temperature: 84°F Accessory Package: Compression fittings are installed in factory Housing Options: High Polish Stainless Steel Fail safe to cold by pass: YES

INSTANT-TEMP®

(2.2 GPM FLOW RATE)

Dimension:

7-5/16” (H) x 10-3/4” x 2-3/4” Weight: 8 lbs Material: Stainless steel housing;

Celcon plastic element assembly with nichrome coils.

Microprocessor Controlled: YES Min. Operating Flow: 2.2 GPM Operating Pressure: Minimum 45 PSI / Maximum 150 PSI Max. Operating Temperature: 84°F Accessory Package: Compression fittings are installed in factory Housing Options: Satin Finish & High Polish Stainless Steel Fail safe to cold by pass: YES

T E M P E R A T U R E R I S E A T :

MODEL WATTS

2.2

GPM

(OPTI-

MUM)

2.4

GPM

2.5

GPM

2.6

GPM

2.8

GPM

3.0

GPM

M-40EW/208 8,320 25°F 23°F 22°F 21°F 20°F 19°F

M-40EW/240

9,600 29°F 27°F 26°F 25°F 23°F 21°F

M-40EW/277 11,080 34°F 31°F 30°F 29°F 27°F 25°F

M-50EW/240

11,520 35°F 32°F 31°F 30°F 28°F 26°F

T E M P E R A T U R E R I S E A T :

MODEL WATTS

2.2

GPM

(OPTI-

MUM)

2.4

GPM

2.5

GPM

2.6

GPM

2.8

GPM

3.0

GPM

E-80EW/208 8,000 25°F 23°F 22°F 21°F 20°F 18°F

E-90EW/240

9,000 28°F 26°F 25°F 24°F 22°F 21°F

E-90EW/277 9,000 28°F 26°F 25°F 24°F 22°F 21°F

* 240 volt may be operated at 220V.

However, an approximate 15% decrease in temperature will be experienced.

StampeJJ Highlight

Standards for:

17451 Hurley St. :: City of Industry, CA 91744 Phone 800-447-4962 :: 626-937-4270

Fax 626-937-4279 :: www.chronomite.com

Since 1966

Chronomite Laboratories is a member of Acorn Engineering’s Family of Companies

APPLICATION: EYEWASH

Member of U.S. Green Building Council

Water Conserving Product

Made in the USA

WARM

COLD

1-7/8" (48)

Instant-Flow Micro Heater

Mounting Flanges (4) with 7-32" Diam.Holes

J-Box 3/8" Cold Water Inlet

5/8" x 3/8" Angle Stop Valve

3/8" OD 84°F

(Tepid) Water Outlet Keep line as short as possible

2" (51)

3-5/16" (84)

Compression

Shown with Acorn Safety Model S0410 Eyewash

(not provided)

Fittings (2)

6-1/4" (159)

1/4" (6)

9-5/8" (244)

1/4" (6)

1/4" (6)

1/4" (6)

Conduit

WIRING CONNECTION

Hot or Neutral

Hot or Neutral

Refer to local code for wire size.

"GND"

is earth ground

ATTENTION:

Unit must be hard wired.

NOTE: Heater is single phase.

All tests are measured at the output of the heater.

APPL-EW 11/23/10

Note: Heater to be installed below the level of all hot water outlets serviced by the heater

Heater (shown Instant-Flow®

Micro) should be protected from water spray.

Mounting Flanges (4) with Ø 7/32” Holes