Bulletin_No._1_-_Belt_and_Tip_-_MIL-DTL-833_-_Final_-_15Jul19.pdf

US ARMY COMBAT CAPABILITIES DEVELOPMENT

COMMAND (CCDC) SOLDIER CENTER

10 GENERAL GREEN AVENUE

NATICK, MA 01760-5019

AGSU BULLETIN TO INDUSTRY NO. 1

15 July 2019

TO: MEMBERS OF THE TEXTILE AND GARMENT INDUSTRIES

SUBJECT: Belt, Trousers, Cotton Webbing, with Clip; MIL-DTL-833H dated May 1, 2019

1. The following information is available for release to industry and is to be included in all current and future procurements for the subject item purchased as part of the U.S. Army

Uniform Quality Control Program.

2. Request the following changes be made to MIL-DTL-833H:

TABLE I, in 3/, line 1: Delete “buffed” and substitute “non-buffed”.

3.7.1, at end of paragraph, after “(NSN)”: Add: “and the age code labeling (see 3.7.3.1).”

Add the following new paragraphs:

“3.7.3 Certification label. Each belt shall have a hang tag label attached stating certification information as described in 4.6 (see 6.10).

3.7.3.1 Age code labeling. Each certification label shall have an age code for quarter and year certification was issued placed at the bottom of the certification label. The age code may be accomplished by direct printing, stamping or stenciling.”

Add the following new paragraph:

“4.6 Certification. When the belts are purchased individually or in lots, the supplier shall certify to the purchaser that the items have been made in accordance with the quality of material

This Bulletin forms Amendment-1 to MIL-DTL-833H and is mandatory for use in the U.S. Army Uniform Quality Control Program until such time as the document is revised.

BULLETIN NO. 1

and components established by this purchase description and shall include a hang tag label incorporating certification number assigned. In addition, the label shall have an age code for quarter and year certification was issued and placed at the bottom of the certification label. The label shall read as follows:

“This item is warranted to meet or exceed the standards of MIL-DTL-833 as specified by the Program Executive Office - Soldier and was produced under

Certificate No. from basic material and controlled components warranted by the manufacturer to have been produced in accordance with the sample under current certificate.”

“Q3 2007 or 03/2007” (Examples for 3rd quarter 2007)

Add the following new paragraph:

“6.10 Certification Procedures. For a copy of the US Army Uniform Quality Control

Program (UQCP) Operating Procedures please contact Department of the Army, Combat

Capabilities Development Command (CCDC) Soldier Center, 10 General Greene Avenue, Natick, MA 01760, ATTN: FCDD-SCP-WC.”

BRIANNA PLUMMER

U.S. Army Uniform Quality

Control Program