B08_-_Solicitation_Attachment_0047_-_Bulletin__No._18_-__Necktie_-_GL_PD_19021.pdf
PDF 377 KB Posted
- Attached to
- Army Green Service Uniform (AGSU)
- Solicitation number
- W911QY-19-R-0040
About this file
This bulletin provides revisions to specifications for the Army Green Service Uniform necktie. The U.S. Army Combat Capabilities Development Command Soldier Center issued Bulletin No. 18 revising key details for Necktie, Unisex procured under Solicitation Number W911QY-19-R-0040. Revisions include changes to the construction of the wide and narrow ends of the necktie, replacement of tables outlining pattern parts and measurements with updated tables, and substitution of a new diagram depicting necktie construction. The bulletin is to be used in conjunction with all active bulletins for GL-PD 19021 and mandates compliance with the revisions for Army Green Service Uniform necktie procurements under the Uniform Quality Control Program until further revision of the documents.
Solicitation Attachment 0047 - Bulletin No. 18 - Necktie - GL PD 19021
View the file
Other files
Show 40 more
Latest 50 of 69 listed here. See the rest on GovTribe.
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
US ARMY COMBAT CAPABILITIES DEVELOPMENT
COMMAND (CCDC) SOLDIER CENTER
10 GENERAL GREENE AVENUE
NATICK, MA 01760-5019
AGSU BULLETIN TO INDUSTRY NO. 18
27 August 2019
TO: MEMBERS OF THE TEXTILE AND GARMENT INDUSTRIES
SUBJECT: Necktie, Unisex; GL-PD 19021 dated 15 July 2019
1. The following information is available for release to industry and is to be included in all current and future procurements for the subject item purchased as part of the U.S. Army
Uniform Quality Control Program.
2. Request the following changes be made to GL-PD 19021:
3.1: Delete second, third and fourth sentences and substitute the following “The wide end of the necktie shall be tipped with lining fabric or basic fabric and the narrow end shall be self-faced. The wide shaped layer of interlining shall extend from the point of the wide end to the seam and shall be left free unattached for a distance of 2 to 2-1/2-inches at the wide end of the necktie. The 1-inch (narrow) bias strip of interlining shall be placed 1-3/8-inches from bottom of the wide end of the shaped interlining and stitched in the center of the seam lengthwise until the end of finished narrow end of the necktie.”
TABLE II: Delete in its entirety and substitute the following new table:
This Bulletin will be used in conjunction with all active bulletins of GL-PD 19021 and is mandatory for use in the U.S. Army Uniform Quality Control Program for procurements of the AGSU until such time as the document is revised.
Bulletin No. 17
“TABLE II. List of pattern parts.
Material Nomenclature Pattern Abbreviation Cut Parts
Style A
Basic material
(see 3.2.1)
Tip
Tail
Tipping (alternate)
PD19021A-TIP
PD19021A-TAIL
PD19021A-TIPPING
Interlining (see
3.2.2)
Sew-In Interlining PD19021A-INERLINING 1
Tipping
(see 3.2.3)
Tipping PD19021A-TIPPING 1
Style B
Basic material
(see 3.2.1)
Tip
Tail
Tipping (alternate)
PD19021B-TIP
PD19021B-TAIL
PD19021B-TIPPING
Interlining
(see 3.2.2)
Sew-In Interlining PD19021B-INERLINING 1
Tipping
(see 3.2.3)
Tipping PD19021B-TIPPING 1
TABLE III: Delete in its entirety and substitute the following new table:
“TABLE III. Finished measurements (inches).
Widest
Point at
Bottom (A)
Width at
Seam (B)
Width at
Narrow End
(C)
Overall Length from Point to
Point (D)
Style A (Regular) 2-3/4 1-1/4 1-1/4
1-1/4 61
Style B (Short) 2-3/4 1-1/4 57
Tolerance + 1/8 + 1/8 + 1/8 + 1/4
Delete “Figure 1” in its entirety and substitute the attached new Figure 1.
BRIANNA PLUMMER
U.S. Army Uniform Quality
Control Program d/ftM-C, �;n,n1-,I!//
Bulletin No. 17
FIGURE 1. Necktie, Unisex
Custodian: Preparing Activity:
Army - GL Army - GL
File details come from the government source that posted it. Updated .