Attachment_10_DD_Form_1664.pdf

DATA ITEM DESCRIPTION Fom @pmvsd OMB No. 070+01S%

-mcaWlbzul am5—c4—lk.lb CItmum mawmwl, omx, cu mmmMq0mr8mm Ma muaw.~mmowm+WJ!4— cmcam=m~--dtitax sOw—

~.alqaiatc.ma, ,- * - -Uaesam d -

~-mnsm’cmmmw anmfmwmammmbn m* H&iy, SUM!Xin%g%%%%!x%? .%--%S% mmpl!ml

-m - ~ - Woo Wmassl. Warhm’m DC 2Em.

1.TrrLE 2. W3STUWATION NUMBER

Cidibmtion Cerrificme DI-QCIC-80798A

1.❑ESCRIPTIONJPUWKISE

3.1 The Calibration Certificate decumems the performance of cidibrmion in accordance with comract specifications for acquired equipment.

1.APPSrOVALOATS S..0F13CEOFP-Y RESPONS18UJW[OPR) VweMc@

Sa.OTICAPPLICABLE Sb.GIOEP4F%%SCABLE

073097 F-AFMETCAUMLEE

r.APPLICATIOMNTERRELATIONSI(IF

7.1 This Dxa Item Description (DID) contains the formal and comem prtpamtion instructions for tbe dnm xcxfuct generated by the specific msddiscrete msk requirement as delineated in the conwac[.

7.2 This DID is applicable 10contmcts for equipment requiring certified calibration prior to delivery.

7.3 This DID supersedes DI-QCIC-S0798.

L APPROVALLIMITATION W -ABLE FORUS Qb.AuScNUUBER

F72S4

0.PREPARATIONINSTRUCTIONS

10.I m. Contractor format is nccepmble.

10.2 &sJ&Jx. The Ctdibmtion Certificate shall include:

a. Tide, e.g. “’Calibrmion Certificn[e”’ or “’Colibmtion Repon”.

b. Nmssemsd address of Iabomtov, and location where the calibration was cwried out, if different fmm the Iddmxs of [he Inbawory.

c. Unique identification of the cerrificme or repors (such as serial number). each page. wsd [oud number of mges.

(Continued on Page 2,

1. DISTRIBWIONSTATEMENT

DISTRIBUTION STATEMENT A: Approved for public release; dis[ribu[ion is unlimi[ed.

)FOmllw.wsm Prmtim Mulklu . . .Iltim. 0.”. ,., ,.-

DI-OCIC-80798A

Block 10, Prcpm’o!ion Inwuc!ions (Cominued)

d. Name and address of customer. when npproprime.

e. Description of the item calibrated, including model number msdserial number.

f. Condition of the calibration ilem.

g. Date (s) of performance of calibrwion, when appropriate.

h. [dentificntion of the calibration procedures used, or description of any non-standard method used.

i. Any devimion from. additions to, or exclusions from the ctdibmtion method. and information relevant [o a specific calibmtion, such m environ merrud conditions.

j. hkmrements. examinations. curdderived msul(s supponed by tables. gmphs, sketches, mrd photographs. as appropriate, mrd wsy failures identified.

k. A statement of the estimated uncertainty of the colibmtion resul[s (See ISO Guide 10 the

Expression of Uncermin[y of Measummem).

1. A signature msd tide, or equiwdem identification of the person(s) assuming responsibility for the content of Lheceriificrition or rtport, and dute of issue.

m. Where relevam. a statement [o the effect !hat (he msul[s relate only [o the i[ems calibmted.

n. A strmemem (ha! the ceflilica[e or report shall no[ be reproduced except in full, wilhoul [he wriuen appmvd of the Iabomtory.

o. Special limitations of u.xe.

p. A tmceabilily stmemen(. including n complete description of all smndmds in [he chain of imceabiliiy to national swrdards. NOTE: When [he cenificme or report conrnins results of calibrations performed by subcontmctors, these results shall be clearly identified.

Page 2 of 2 Pages

I

I

DATA ITEM DESCRIPTION I fwm4vr...d OMB No,070E-01E8

SPECIALINSPECTIONEQUIPMENTDESCRIPTIVE DI-QCIC-81OO6

DoCUMENTATION DEECRJPllON/PURPOSE

3.1 Specialinspectionequipmtitdescriptivedocumentation(ED)prol&lesset up, operatingand maintenanceinformationaboutcomplexspecialinspection e~s (S~) that cmot be definedby KLorrnaldrawingand specification practices.

APPROVALDATE 5. OFFICEOF PSIMAilY RESPONSISIUTY (OPRJ 6b. CdM? S?UUSLE mmMO@ L 890911

APPLIGWIONIINTSSREIATION.WP

7.1 This Data ItemDescription(DID)containsthe formatand contentprepara-tion instructionsfor EDs resultingfromthe work taskdescribedin 3.6.7of

MIL-T-31OOO. .-,

7.2 This DID is applicableto acquisitionsof tiitary systems,equipments,s.@ componentsthat requireGovernmentpersonnelto operatecomplexS2S that cannot be defined by normaldrawingor specificationpractices.

(Continuedon page 2) UP,?OVAL UMITATION 9a. APP&aeu FoRh5s 9h AMsc NUMS=

D4822

1.PWARATION INSTRUCTIONS

10.1 Raferencedocuments. TM applicableissueof the documentscitedherein, includingtheir approxmldateaendthe datesof applicableamendmentsand revisions,shallbe as citedin the contractor purchase order.

10.2 .General.EDs shallmeetthe requirementsof !4IL-T-31OOO.

10.3 Format. EI)s shallbe in the contractor’sformat,suchas manualsor bruchures. However,each SD shallhavea coversheat,a table,of contents=nd containthe informationspecifiedin 10.4herein.

10.4 content. EM shelldefinethe requirementsandproceduresfor settingLT, programming,op.SrSLti.lIg,calibratingand maintainingthe SIE. Theserequiremaqts end proceduresshallbe specifiedto a levelof detailthatwill enable inspectionpersomel that arenot fullyknowledgeableof tbe S22,to perform inspectionswith the S2S withoutrecourseto the originaldesigncontractoror the assistanceof highlytrainedpersonnel.Tbe informationin 10.4.1and

10.4.2 shall be providedas applicable:

(Continuedon page 2)

1.0157RIBuTIONSTATEMEm

DISTRIBUTIONSTATR4ENTA. Approvedforpublicrelease;distributionis unlimited.

DI-OCIC-81OO6

I

Block7. APPLICATION/REL?LTIONSHIP(Cantinued)

‘.~.3 ‘1’his DID supersedesDI-CMAN-80786.

7.4 ‘fh.isDID is relatedto DI+XZPR-81004,-SpecialInspectionEquipment Drawings“ad AssociatedLists”;DI-QCIC-81005,“SpecialInspection”Equipment OperatingInstructions”;and DI-QCIC-81007,“SpecialInspectionEquipment C&i?rat& Pro&dures”.

Block 10. PREPARATIONINSTRUCTIONS (continued]

10.4.1 Uni&talled materiel. EDS for SIE that is used to inspect has not been installedin en aircraft,vehicle,or otherequipment materielttmt shall include :

a. !fhecoversheetshallincludethe nomenclatureand part identification numberof the SIE being described.

b. A statementas to the purposeof the S22 and the teststo be performed.

c. A generaldescriptionof the SIE, includingsuchparametersas physi-cal, electrical,pneumatic,or otherdistinctivecharacteristics.

d. A listof componentparts identifiedby part identificationnumbers, manufacturer’smodel numbers,or other distinctivedesignationsuch as an ● electricalrating.

e. Schematicdiagrams,drawingsand illustrationszs necessaryto clarify or deftie set up arrangementsor otherpertinentinformation.Wheredrawingsor illustrationswill not suffice,photographsmay be used.

f. Maintenanceinstructions.

h- Specialcalibrationinstructions.

i. Completedescriptionof nonstandardor modifiedstandard parts (suchas machinedparts,cables,adapters,holdingfixtures,modifiedcircuits,standard gages,or meters), used in the SIE or in performingthe inspections.

10.4.2 Jnsta lledmaterie~. In additionto 10.4.1above, SDS for SIE used to inspect materielthat has been installedin an aircraft,vehicle,or other eguipmentshall: .’

a. Definethe technicalcharacteristicsto be inspected and the mannerin which the materielis to be installed.

b. Definethe operatingparameters,applicabletolerances,and criteria for determiningthat the installedmaterielwill performits intendedfunction.

!?age 2 of 2

DATA ITEM DESCRIPTION I Form Approved

OMB NO. 0704-0188

I public reponing burden for this colieaion of information is estimated to average 110 houn per rqhmse, Inciudicq the time for reviming instruclionr, warching existing dao source$, of information, indudlng suggestions for reducing this burden. to Washington Headsuanen Services. Dlrmorate for InfOrmltIOn OPeratlOnl and Repom, 1215 Jefienon Davis gJ(hcring ~ n d mainraining the data needed, and completing and reviewing the collection of information. krd comments regarding this burden etIrnate or any other a m of this

H i g h l y . Sulte 1204, Arlington, VA 222024302. and to tht Office of Management and Budget, Paperwork Reduclion Projecl (07040188). Washington, DC 20503.

I . TITLE 2. IDENTIFICATION NUMBER

SPECIAL INSPECTION EQUIPMENT CALIBRATION DI-QCIC-81007

PROCEDURES

3. DESCRIPTIONIPURPOSE

3.1 A Special Inspection Equipment Calibration Procedure (CP) describes the requirements and procedures for calibrating special inspection or special test equipment (SIE) as indi'vidual pieces of equipment or as a system or group of equipments.

1. APPROVAL DATE 5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTlC APPLICABLE 6b. GIDEP APPLICABLE

(YYMMDD)

890911 DO

7. APPLICATION /INTERRELATIONSHIP

7.1 This Data Item Description (DID) contains the format and content' prepara-tion instructions for CPs resuiting from the work task described by 3.6.8 of

MIL-T-31000

7.2 This DID is applicable to acquisitions of military systems, equipments, and components that require the use of SIE to achieve the en9ineering requirements of the item.

(Continued on sheet 2) i . APPROVAL LIMITATION 94. APPLICABLE FORMS 9b. AMSC NUMBER

D4823

IO. PREPARATION INSTRUCTIONS

10.1 Reference documents. The applicable issue of the documents cited herein, including their approval dates and the dates of applicable amendments and revisions, shall be aS cited in the contract or purchase order.

10.2 General. CPs shall meet the requirements of MIL-T-31000.

10.3 Content. CPs shall specify each SIE characteristic to be calibrated; the acceptable tolerances for these characteristics; the calibration equipment to be used; the measurement standards to be used; and the applicable parameters, ranges, and accuracies of the measurement standards. CPs shall provide instructions as to how each instrument characteristic or measurement parameter is to be calibrated.

10.4 ,Format. Each CP will have a cover sheet, a first page, a list of effective pages, and four sections of text.

(Continued on page 2)

DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.

Licensed by Information Handling ServicesLicensed by Information Handling Services

DI-QCIC-81007

Block 7 . APPLICATION / INTERRELATIONSHIP (Continued)

7 . 3 This D I D supersedes DI-CMAN-80787.

7 .4 This D I D is r e l a t e d t o DI-DRPR-81004, "Special Inspection Equipment Drawings and Associated Listsv'; DI-QCIC-81005, "Special Inspection Equipment Operating Instructions"; DI-QCIC-81006, "Special Inspection Equipment Descrip-t i v e Documentation''; and DI-R-7064, "Calibration System Description".

Block 1 0 . PREPARATION INSTRUCTIONS (continued)

1 0 . 4 . 1 Headins and T i t l e . The heading of each CP s h a l l c o n s i s t of t he words flEquipment Calibration Procedure". The t i t l e s h a l l be t h e nomenclature of the SIE t o which t h e CP appl ies .

10 .4 .2 Cover sheet. The cover sheet sha l l conta in the heading and t i t l e .

10 .4 .3 F i r s t Paqe. The first page of the CP shall con ta in t he heading and titl.e, and the issuance, approval and change record.

10 .4 .4 Effective Dacres. The list of effective page of t h e CP-by page number and page revision

10.5 Sections. The content of the CP shall be

subsections numbered and t i t l ed as follows:

10.5.1 Section 1. The first sect ion of the CP

as : "1. Introduct ion. I t .

pages shall ident i fy each l e v e l .

specified i n s e c t i o n s and ac t ive shal l be numbered and iden t i f i ed

10.5.1.1 Scope. The first subsection of the Introduct ion shal l be iden t i f i ed as "1.1 Scope". It sha l l con ta in a s ta tement tha t the CP prescr ibes the requirements f o r per iodic ca l ibra t ion of t he un i t o r sys t en o f SIE and iden t i fy t h e equipment by i t s nomenclature and p a r t number.

10.5.1.2 Applicabili tv. The second subsection of the In t roduc t ion sha l l be i d e n t i f i e d as "1.2 & p l i c a b i l i t v " . It s h a l l i d e n t i f y the S I E t o be ca l ib ra t ed and any conditions which limit t h e a p p l i c a b i l i t y of the procedure.

1 0 . li. 1.3 Cal ibra t ion In te rva l . The th i rd subsection of the Introduct ion ' shal l be identified as "1.3 Calibrat ion Interval" . It s h a l l the specify the intervals a t which t h e SIE must be ca l ib ra t ed .

Page 2 of 4 o

DI-QCIC-BL007.QC 9 9 9 9 9 8 9 0000362 3 W

10.5.1.4 Pre-calibration requirements. The fourth subsection of the Introduc-tion shall be identified as "1.4 Pre-calibration requirements". It shall identify any requirements that must be met before the calibration procedure is started. Examples of pre-calibration requirements are the separate calibration of commercial equipment which is part of (or supplied with ) the SIE to which the CP applies, and calibration of external equipment, such as transfer standards required to perform the calibrations.

10.5.1.5 Authorized Adjustments and Semence. The fifth subsection of the Introduction shall be identified as "1.5 Authorized Adiustments and Sequences".

It shall identify any adjustments that are permitted or prohibited that are not specifically covered in the CP. It shall also identify any restrictions on deviations from the sequence of the operations specified in the CP .

10.5.1.6 Safetv precautions. The sixth subsection of the Introduction shall be identified as "1.6 Safetv Precautions". .It shall identify any preventive measures that must be taken during the calibration procedure to prevent damage or injury to the SIE, calibration personnel, or calibration equipment. This subsection is not a substitute for caution and warning notes that are to be placed in the text coincident with the operations that may pose a hazard to equipment or personnel.

10.5.2 EcruiDment and Facilities Required. The second section of the Cp shall be identified as "2. Equipment and Facilities Required". . - . . . ., .

10.5.2.1 Maior Equipment. The first subsection of Equipment and Facilities Required shall be identified as "2.1 Maior Equipment".. It shall contain a list of the major items of equipment needed to calibrate the unit or system to which the procedure applies. Examples of these are standard commercial instruments. , and transfer standards. The SIE to be calibrated and instruments which are part of or supplied with the SIE are not listed in this section.

10.5.2.2. Facilities. The second subsection of Equipment and Facilities Required shall be identified as "2.2 Facilities". It shall contain a list of facilities which are necessary to calibrate the SIE. Examples of facilities are power systems (sources) , "clean rooms", and "screen rooms".

10.5.2.3 Miscellaneous. The third subsection of Equipment and Facilities Required shall be identified as "2.3 Miscellaneous". It shall identify any items required to calibrate the S I E that are not covered by 10.5.2.1 or 10'. 5.2.2 herein. Typical items to be identified are test leads, resistors, test aids, and reference documents.

10.5.3 In i t i a l Cond i t ions . The th i rd sec t ion of the CP shall be i d e n t i f i e d a s "3. In i t i a l Conditions'!. This sec t ion sha l l con ta in a l l i n s t r u c t i o n s o n ' a l l necessary actions which must precede the ac tua l ca l ibra t ion process . Examples of t hese ac t ions are making preliminary connections, sett ing controls, and warming up equipment.

10 .5 .4 Procedure. The fourth sect ion of the CP shall be i d e n t i f i e d a s " 4 .

Procedure!', It sha l l conta in ins t ruc t ions cover ing a l l of the measurements, adjustments, recording of performance data, and any other operations necessary t o complete t he cal ibrat ion procedure. Instruct ions for construct ing cal ibra-t ion curves , char t s , pa t te rns and diagrams s h a l l be included when such curves, cha r t s , pa t t e rns o r diagrams a r e required f o r the ca l ib ra t ion of the SIE.

DATA ITEM DESCRIPTION

Title: PRODUCT DRAWINGS AND ASSOCIATED LISTS

Number: DI-SESS-81000B Approval Date: 20011214 ASMC Number: A7429 Limitation:

DTIC Applicable: GIDEP Applicable:

Office of Primary Responsibility: AR Applicable Forms:

Use/relationship: Product Drawings and Associated Lists provide engineering data to support competitive procurement and maintenance for items interchangeable with the original items. These drawings represent the highest level of design disclosure.

a. This Data Item Description (DID) contains the format and content preparation instructions for Product Drawings and Associated Lists resulting from the work task described in 3.6.3 of MIL-DTL- 31000B.

b. This DID is applicable to acquisitions of military systems, equipment, and components. It is intended for acquiring drawings and Associated Lists at the end of the Engineering and Manufacturing Development Phase and during subsequent phases of the DoD materiel life cycle.

c. It is not intended that all the requirements contained herein should be applied to every program. This DID should be tailored to the minimum data requirements of the applicable contract or purchase order.

d. This DID supersedes DI-DRPR-81000A which superseded DI-DRPR-81000.

e. This DID is related to DI-SESS-81001B, DI-SESS-81002B, and DI-SESS-81003B.

f. A purchased item, as defined by ASME Y14.24, an item which is sold or traded in the course of conducting normal business operations, is used by commercial industry, or is a specialized version of a supplier's general product line which he routinely customizes. Purchased items as used herein have also been referred to as vendor items or vendor-developed items.

Requirements:

1. Reference Documents, The applicable issue of documents cited herein, including their approval dates and the dates of applicable amendments, notices, and revisions, shall be as cited in the contract.

2. General. Product Drawings and Associated Lists shall meet the requirements of MIL-DTL-31000B.

Product Drawings and Associated Lists shall provide the design disclosure information necessary to enable a manufacturer of similar products at the same or similar state of the art to produce and maintain quality control of item(s) so that the resulting physical and functional characteristics duplicate those of the specified item. These drawings shall:

a. Reflect the end product at its current level of design maturity.

DI-SESS-81000B

b. Provide the engineering data for Logistics Support products.

c. Provide the necessary data to permit competitive acquisition of the original item(s).

3. Format. Product Drawings and Associated Lists shall be in either the contractor's format or Government's format as specified on the TDP Option Selection Work Sheet incorporated into the contract or purchase order.

4. Content. Product Drawings and Associated Lists shall conform to the requirements of ASME Y14.100, or, if applicable, ASME Y14.100 and Appendices B through E, as required, and ASME Y14.34M. They shall document directly or by reference the following, as applicable:

a. Details of unique processes, i.e., not published or generally available to industry, when essential to design and manufacture.

b. Performance ratings.

c. Dimensional and tolerance data.

d. Critical manufacturing processes and assembly sequences.

e. Toleranced input and output characteristics.

f. Diagrams.

g. Mechanical and electrical connections.

h. Physical characteristics, including form, finishes, and protective coatings.

i. Details of material identification, including material condition, and mandatory treatments and coatings.

j. Inspection, test and evaluation criteria.

k. Equipment calibration requirements.

l. Quality assurance requirements.

m. Hardware marking requirements.

n. Requirements for reliability, maintainability, environmental conditioning, shock and vibration testing and other operational or functional tests.

o. Vendor substantiation data when required by the contract or purchase order.

p. Requirements for programming software into devices or assemblies including a description of the input media and the procedures for validating that the software has been installed correctly.

q. Special consideration items and processes.

5. Item definition. All parameters required to define each unit, assembly, subassembly, part or material shall be presented on the applicable drawing. This includes data such as:

a. All necessary mechanical dimensions to fully define fabrication, acceptance, interface or installation of the item depicted.

b. All necessary electrical parameters to fully define fabrication, acceptance, interface or installation of the item depicted.

c. All other necessary physical parameters to fully define fabrication, acceptance, interface or installation of the item depicted, i.e., weight, pressure, viscosity, etc.

d. All necessary environmental conditions which units, assemblies, subassemblies, parts and materials must meet to perform effectively in the end item, such that the end item will meet its specification requirements.

6. CAGE code and document numbers. Product Drawings and Associated Lists shall be identified with the contractor's CAGE code and contractor document numbers or with a Government CAGE code and document numbers as specified in the TDP Option Selection Work Sheet incorporated in the contract or purchase order.

7. Selection of drawings. The types of drawings required will vary according to the complexity of the contract end item. The TDP Option Selection Work Sheet incorporated in the contract or purchase order will specify whether the contractor or the Government is responsible for selecting the types of drawings and Associated Lists.

7.1. Vendor Item Control Drawings. Vendor Item Control Drawings shall be used to specify the requirements for purchased items (see f, under Use/Relationship) when such items have been approved for use in the design and are used without alteration, selection or source qualification (testing of an item prior to procurement action to ensure that it satisfies the specified requirements).

7.2. Source Control Drawings. Source Control Drawings shall be used to specify the requirements for purchased items (see f, under Use/Relationship) only when such items have been approved for use in the design and:

a. the item is for a critical application and

b. the requirements can be met by an item from one or more sources and

c. the application required source qualification (testing of an item prior to procurement action to ensure that it satisfies the specified requirements).

7.3. Standardized Microcircuit Drawings. Standardized Microcircuit Drawings (MIL-HDBK-780) shall be used to specify the requirements of microcircuits.

Title: COMMERCIAL DRAWINGS AND ASSOCIATED LISTS

Number: DI-SESS-81003B Approval Date: 20011214 ASMC Number: A7432 Limitation:

DTIC Applicable: GIDEP Applicable:

Office of Primary Responsibility: AR Applicable Forms:

Use/relationship: Commercial Drawings and Associated Lists define commercial items acquired by the Department of Defense.

a. This Data Item Description (DID) contains the format and content preparation instructions for Commercial Drawings and Associated Lists resulting from the work task described in 3.6.4 of MIL-DTL- 31000B.

b. This DID is applicable to acquisitions of military systems, equipment, and components. Its use is limited by the requirements of the Defense Federal Acquisition Regulation Supplement, Subpart 227.

Before acquiring Commercial Drawings and Associated Lists, the acquiring activity should evaluate the contractor's drawing package and engineering documentation practices to determine if the data will be satisfactory for the Government's intended uses.

c. This DID should be tailored to the minimum data requirements of the applicable contract or purchase order.

d. This DID supersedes DI-DRPR-81003A, which superseded DI-DRPR-81003 and DI-CMAN-80784.

e. This DID is related to DI-SESS-81000B, DI-SESS-81001B, and DI-SESS-81002B.

Requirements:

1. Reference Documents. The applicable issue of documents cited herein, including their approval dates and the dates of applicable amendments, notices, and revisions, shall be as cited in the contract.

2. General. Commercial Drawings and Associated Lists shall be in accordance with MIL-DTL-31000B and the TDP Option Selection Work Sheet incorporated into the contract or purchase order.

3. Format. Drawings and associated lists shall be in the contractor's or original supplier's format.

4. Content. Commercial Drawings and Associated Lists shall provide sufficient information to permit Government maintenance, modification, and engineering analysis of commercial items.

Title: SPECIAL INSPECTION EQUIPMENT (SIE) DRAWINGS AND

ASSOCIATED LISTS

Number: DI-SESS-81004B Approval Date: 20011214 ASMC Number: A7433 Limitation:

DTIC Applicable: GIDEP Applicable:

Office of Primary Responsibility: AR Applicable Forms:

Use/relationship: Special Inspection Equipment (SIE) Drawings and Associated Lists provide the data required for the limited production of SIE, which duplicates the physical and performance characteristics of the original SIE.

a. This Data Item Description (DID) contains the format and content preparation instructions for SIE Drawings and Associated Lists resulting from the work task described by 3.6.5 of MIL-DTL-31000B.

b. This DID is applicable to acquisitions of military systems, equipment, and components that require the use of special inspection equipment to achieve the engineering requirements of the item.

c. When this DID is imposed in a contract or purchase order, consideration should be given to applying DI-QCIC-81006, Special Inspection Equipment Descriptive Documentation.

d. This DID supersedes DI-DRPR-81004A, which superseded DI-CMAN-81004.

Requirements:

1. Reference Documents. The applicable issue of documents cited herein, including their approval dates and the dates of applicable amendments, notices, and revisions, shall be as cited in the contract.

2. General. SIE Drawings and Associated Lists shall meet the requirements of MIL-DTL- 31000B. SIE Drawings and Associated Lists shall be in accordance with ASME Y14.100, or, if applicable, ASME Y14.100 and Appendices B through E, as required, and ASME Y14.34M.

3. Format. SIE Drawings and Associated Lists shall be in contractor format or as specified in the contract.

4. Content. SIE Drawings and Associated Lists shall provide the design disclosure information necessary to permit the manufacture of inspection equipment that duplicates the functions of the original SIE. SIE Drawings and Associated Lists shall include:

a. Details of processes, which are essential to achieving the engineering requirements of the item when these processes are not published or generally available to industry.

b. Performance ratings and tolerances.

DI-SESS-81004B

c. Dimensions and tolerances

d. Critical manufacturing processes and assembly sequences.

e. Tolerance input and output characteristics

f. Diagrams

g. Mechanical and electrical connections

h. Physical characteristics, including form and finish requirements

i. Details of material identification, including heat treatment and protective coatings

j. Inspection, test and evaluation criteria

k. Calibration information

l. Environmental requirements

m. Reliability requirements.

n. Maintainability requirements

5. Selection of drawings. The types of drawings and associated lists to be prepared shall be selected from ASME Y14.24 and ASME Y14.34M. The TDP Option Selection Work Sheet incorporated in the contract or purchase order will specify whether the contractor or the Government is responsible for selecting the types of drawings and associated lists to be prepared.

6. Multi-detail and detail assembly drawings. Multi-detail and detail assembly drawings may be used at the discretion of the contractor. The mono-detail drawing system shall not be mandatory for SIE drawing packages.

7. CAGE Code and document numbers. SIE Drawings and Associated Lists will be identified with the contractor's CAGE Code and contractor document numbers or with a Government CAGE Code and Government document numbers as specified in the TDP Option Selection Work Sheet incorporated in the contract.

8. Control drawings. Vendor items used in the SIE, without alteration, selection, or source qualification, shall be identified on SIE Drawings and Associated Lists by the vendor's CAGE Code and item identification. Vendor Item Control Drawings are not required for vendor items. When vendor items must be altered, selected, or require source qualification prior to use in the SIE, they shall be documented on Altered Item, Selected Item, or Source Control Drawings in accordance with ASME Y14.24.

DI-SESS-81004B

9. SIE Drawings and Associated Lists shall include references to applicable SIE Operating Instructions, SIE Descriptive Documentation and SIE Calibration Procedures, when these data products are required by the contract or purchase order.