6. DD Form 1664 Laser Cutter Bldg 134.pdf
PDF 20 KB Posted
- Attached to
- 4kw Laser Cutting System
- Solicitation number
- W911KF-24-Q-0049
About this file
This document is a Data Item Description (DID) that outlines the required technical data for a Laser Cutting System contract. The contractor must provide three copies of the following documentation: Operator's Manual, Engineering Support Manuals, Engineering Drawings, and Equipment Manuals. The contractor shall also provide three CDs containing the delivered documentation. The DID is applicable when existing commercial-off-the-shelf (COTS) manuals are acquired to evaluate their acceptability for government use. The related federal contract opportunity is for the purchase, delivery, and installation of one new Laser Cutting System capable of cutting Inconel and Mica sheet. The solicitation is issued by the Department of the Army Materiel Command Contracting Command Detroit Arsenal.
View the file
Other files
Show all 12
On GovTribe
Work with this file
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Form Approved OMB No. 0704-0188
Page ___ of _____ Pages Designed using Perform Pro, WHS/DIOR, Aug 96
PREVIOUS EDITION MAY BE USED.DD FORM 1664, AUG 96 (EG)
DATA ITEM DESCRIPTION
1. TITLE 2. IDENTIFICATION NUMBER
3. DESCRIPTION/PURPOSE
4. APPROVAL DATE
(YYYYMMDD)
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE 6b. GIDEP APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
10. PREPARATION INSTRUCTIONS
11. DISTRIBUTION STATEMENT
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
| 1 TITLE: Commercial off the Shelf Manuals |
| 2 IDENTIFICATION NUMBER: Operator' Manual CDRL A01 DI-TMSS-80527A |
Engineering Support Manuals CDRL A02 DI-TMSS-80527A Engineering Drawings CDRL A04 DI-SESS-81003B Equipment Manuals CDRL A05 DI-TMSS-80527A 3 DESCRIPTIONPURPOSE: 6.0 Documentation The contractor shall provide documentation to the government as listed below. Three copies each of the following technical data shall be provided as specified on the attached DD Form 1423 with the Laser Cutting System. The contractor shall also provide three CDs that each contains copies of the delivered documentation.
| 4 APPROVAL DATE YYYYMMDD: |
| 5 OFFICE OF PRIMARY RESPONSIBILITY OPR: |
| 6a DTIC APPLICABLE: |
| 6b GIDEP APPLICABLE: |
| 7 APPLICATIONINTERRELATIONSHIP: This Data Item Description (DID) is applicable when existing COTS manuals are acquired in order to evaluate their acceptability for Government use. |
COTS mauals are acceptable for Government use when they conform to applicable requirements of 6.0 of MIL-M-7298.
| 8 APPROVAL LIMITATION: |
| 9a APPLICABLE FORMS: |
| 9b AMSC NUMBER: |
| 10 PREPARATION INSTRUCTIONS: 6.0 Documentation The contractor shall provide documentation to the government as listed below. Three copies each of the following technical data shall be provided as specified on the attached DD Form 1423 with the Laser Cutting System. The contractor shall also provide three CDs that each contains copies of the delivered documentation. |
| 11 DISTRIBUTION STATEMENT: |
| of: |
File details come from the government source that posted it. Updated .