Attachment 4-DD Form 1664.pdf
PDF 20 KB Posted
- Attached to
- CNC JIG Grinder Federal contract opportunity
- Solicitation number
- W911KF-23-Q-0053
About this file
This document attachment is a Data Item Description form providing technical requirements for manuals to be delivered with a Precision CNC Jig Grinder. The contractor must provide three copies each of an operator's manual and equipment manuals on the delivered grinder, as well as three CDs containing this documentation. The manuals shall include electrical, hydraulic, and pneumatic schematics as applicable, parts lists, troubleshooting procedures, preventive maintenance requirements, lubrication schedules, calibration procedures, and any other technical data normally provided. The manuals must be in English and conform to data item descriptors DI-TMSS-80527A and DI-TMSS-80528.
The related federal contract opportunity is a solicitation from the Department of the Army Materiel Command Contracting Command Detroit Arsenal for a CNC Jig Grinder. The solicitation number is W911KF-23-Q-0053.
View the file
Other files for this federal contract opportunity
| File | Type | Posted |
|---|---|---|
| Attachment 2-Evidence of Authority.pdf | ||
| Attachment 3-DD Form 1423 - CDRL for CNC JIG Grinder.pdf | ||
| W911KF-23-Q-0053 Solicitation.pdf | ||
| Attachment 1-Statement of Work JIG Grimder.pdf | ||
| Attachment 5-Technical Requirements Memo.docx | DOCX document | |
| Attachment 6- Past Performance Questionnaire.pdf |
On GovTribe
Work with this file on GovTribe
- Download the original file
- Contacts named in this file
- Similar government files
- Ask GovTribe AI about this file
Text version
Form Approved OMB No. 0704-0188
Page ___ of _____ Pages Designed using Perform Pro, WHS/DIOR, Aug 96
PREVIOUS EDITION MAY BE USED.DD FORM 1664, AUG 96 (EG)
DATA ITEM DESCRIPTION
1. TITLE 2. IDENTIFICATION NUMBER
3. DESCRIPTION/PURPOSE
4. APPROVAL DATE
(YYYYMMDD)
5. OFFICE OF PRIMARY RESPONSIBILITY (OPR) 6a. DTIC APPLICABLE 6b. GIDEP APPLICABLE
7. APPLICATION/INTERRELATIONSHIP
8. APPROVAL LIMITATION 9a. APPLICABLE FORMS 9b. AMSC NUMBER
10. PREPARATION INSTRUCTIONS
11. DISTRIBUTION STATEMENT
The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to Department of Defense, Washington Headquarters Services, Directorate for Information Operations and Reports (0704-0188), 1215 Jefferson Davis Highway, Suite 1204, Arlington, VA 22202-4302. Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS.
| 1 TITLE: Commercial Off-the-Shelf (COTS) Manuals |
| 2 IDENTIFICATION NUMBER: |
| 3 DESCRIPTIONPURPOSE: 6.1 Documents: The contractor shall provide documentation to the government as listed below. Three copies each of the following technical data shall be provided with The Precision CNC Jig Grinder. The contractor shall also provide three CDs that each contains copies of the delivered documentation. |
| 4 APPROVAL DATE YYYYMMDD: |
| 5 OFFICE OF PRIMARY RESPONSIBILITY OPR: |
| 6a DTIC APPLICABLE: |
| 6b GIDEP APPLICABLE: |
| 7 APPLICATIONINTERRELATIONSHIP: 6.2 Content: The manuals shall include electrical, hydraulic, and pneumatic schematics, as applicable; parts lists, trouble shooting procedures, preventive maintenance requirements, lubrication schedules, calibration procedures, etc. Catalogs shall fully describe optional tooling, fixtures, and attachments available for the equipment furnished. In addition, any other technical data normally furnished with the equipment shall be provided. All technical data shall be furnished in the English language and be IAW with the following data item descriptors (DIDs)f (COTS) Manuals", DI-TMSS-80528. |
7.5 This DID supersedes DI-M-4022C, DI-M-6153, and DI-TMSS-80385.
| 8 APPROVAL LIMITATION: |
| 9a APPLICABLE FORMS: |
| 9b AMSC NUMBER: |
| 10 PREPARATION INSTRUCTIONS: Operator's Manual CDRL A01 DI-TMSS-80527A |
Equipment Manuals CDRL A04 DI-TMSS-80527A
| 11 DISTRIBUTION STATEMENT: |
| of: |
File details come from the government source that posted it. Updated .