W900KK23R0005_Attach_15_CBID_III_VACR_IMI_AEC_Exhibit_B_CDRLs.pdf

SFAE-STRI-ST-VTS

6. REQUIRING OFFICE5. CONTRACT REFERENCE

DI-SESS-80639E

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

ENGINEERING CHANGE PROPOSAL (ECP)

2. TITLE OF THE DATA ITEM

B001

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER SESS

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A

8. APP CODE

NO

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

ASREQ

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 8: Government approval and acceptance is required prior to implementing any changes to the established configuration management baseline.

4. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

5. BLOCKS 12 AND 13: Shall be submitted when a change is proposed to the established configuration management baseline. The Government will have 10 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

5. CONTRACT REFERENCE

3.3.11.1 Engineering Change Proposals (ECP)

DI-SESS-80640D

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Request for Variance (RFV)

2. TITLE OF THE DATA ITEM

B002

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER SESS

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

ASREQ

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 8: Government approval and acceptance is required prior to implementing any changes to the established configuration management baseline.

4. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

5. BLOCKS 12 AND 13: Shall be submitted when a request for variance is proposed to the established configuration management baseline. The Government will have 10 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.3.11.3 Variances

DI-SESS-81248B

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Interface Control Document (ICD)

2. TITLE OF THE DATA ITEM

B003

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

X TM OTHER

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 12: Shall be due 20 working days prior to Test Readiness Review (TRR) for Government In-Plant Acceptance Testing (IPAT). The Government will have 15 working days for review, accept/reject and provide comments/ corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

5. BLOCK 13: Revisions as required through the life of the contact. The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.3.9 Hardware and Software Integration

6. REQUIRING OFFICE

DI-NDTI-80809B

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Test/Inspection Report

2. TITLE OF THE DATA ITEM

B008

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER NDTI

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO ADMINISTRATIVE OR OPERATIONAL USE,

EFFECTIVE 5 APR 21. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO U.S. ARMY PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE

DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 10: Shall be due after completion of each Government test event.

5. BLOCK 12: Shall be due 20 working days after completion of Government test events. The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Word and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.4.3.1 Test Discrepancy

DI-NDTI-80566A

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Test Plan

2. TITLE OF THE DATA ITEM

B009

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER NDTI

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 12: Shall be due 30 working days prior to Test Readiness Review (TRR) for Government In-Plant Acceptance Testing (IPAT). The Government will have 15 working days for review, accept/reject and provide comments/ corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

5. BLOCK 13: Revisions as required through the life of the contact. The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Word and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.1.5 Test Readiness Review

DI-NDTI-80603A

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Test Procedure

2. TITLE OF THE DATA ITEM

B010

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER NDTI

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 3: Subtitle shall be determined by the applicable test event.

Applicable test events are: In-Plant Acceptance Test, On-Site Acceptance Test, and Modeling And Simulation Verification And Validation.

3. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

4. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO ADMINISTRATIVE OR OPERATIONAL USE,

EFFECTIVE 5 APR 21. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO U.S. ARMY PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE

DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

5. BLOCK 12: The contractor shall deliver the applicable test procedure 30 working days prior to the applicable test event's Test Readiness Review (TRR). The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 13: Revisions as required through the life of the contact. The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

7. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in MS Office 2013 and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

8. Printed test procedures shall be provided to support all test events.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.1.6.1 In-Plant Acceptance Test (IPAT)

DI-NDTI-80809B

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE2. TITLE OF THE DATA ITEM

Test/Inspection ReportB011

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER NDTI

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO ADMINISTRATIVE OR OPERATIONAL USE,

EFFECTIVE 5 APR 21. OTHER REQUESTS FOR THIS DOCUMENT SHALL BE

REFERRED TO U.S. ARMY PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE

DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 10: Shall be due after completion of each Government test event.

5. BLOCK 12: Shall be due 20 working days after completion of Government test events. The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Word format and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.1.6.1 In-Plant Acceptance Test (IPAT)

DI-IPSC-81431A

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

System/Subsystem Specification (SSS)

2. TITLE OF THE DATA ITEM

B012

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

X TM OTHER

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

2TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government. For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All submissions of the document shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 12: Shall be due 10 working days prior to the System Requirements Review (SRR). The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

5. BLOCK 13: Shall be due 20 working days prior to the Critical Design Review (CDR). Revisions as required through the life of the contact. The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office format and Adobe PDF. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.3.3.1 System Definition Phase

DI-SAFT-80102C

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE2. TITLE OF THE DATA ITEM

Safety Assessment ReportB016

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER SAFT

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 8: Approval is required prior to the Test Readiness Review (TRR) for Government In-Plant Acceptance Testing (IPAT).

4. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

5. BLOCK 12: Shall be due 45 working days prior to Test Readiness Review (TRR) for Government In-Plant Acceptance Testing (IPAT). The Government will have 20 working days for review, accept/reject and provide comments/ corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 13: Revisions as required through the life of the contact. The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

7. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Word format and Adobe PDF format. Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https:

//safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.4.6 Safety Engineering

DI-FACR-80966

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Trainer Facilities Report (TFR)

2. TITLE OF THE DATA ITEM

B018

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER FACR

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

1TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 12: Shall be due 20 working days after completion of the site survey. The Government will have 10 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 5 working days to incorporate changes and resubmit back to the Government.

5. BLOCK 13: Revisions as required through the life of the contact. The Government will have 10 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 5 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Word, Adobe PDF, and native format (if other than MS Office or Adobe PDF). Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.7.1 Site Survey

DI-SESS-81000E

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

Product Drawings/Models and Associated Lists

2. TITLE OF THE DATA ITEM

B019

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

X TM OTHER

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

2TIME/R

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

1. BLOCK 4: The contractor shall address all required DID content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 8: Government acceptance of the data is required prior to shipment of the system.

4. BLOCK 9: All deliveries of this CDRL (digital, CD/DVD, and/or printed) shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY, EFFECTIVE 5 APR 21.

OTHER REQUESTS FOR THIS DOCUMENT SHALL BE REFERRED TO U.S. ARMY

PEO STRI, SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

5. BLOCK 12: Shall be due 20 working days prior to Critical Design Review (CDR). The Government will have 20 working days for review, accept/reject and provide comments/corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 13: Shall be due 20 working days prior to Test Readiness Review (TRR) for Government In-Plant Acceptance Testing (IPAT). The Government will have 20 working days for review, accept/reject and provide comments/ corrective actions. The contractor shall have 10 working days to incorporate changes and resubmit back to the Government. Revisions as required through the life of the contact.

7. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office format, Adobe PDF, and native format (if other than MS Office or Adobe PDF). Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/. All submissions shall be addressed to the Contracting Officer Representative, kenneth.m.waymire.civ@army.mil.

16. REMARKS

000 15. TOTAL

18.ESTIMATED

TOTAL PRICE

17. PRICE GROUP

Page 1 of 1 PagesPREVIOUS EDITION MAY BE USED.DD FORM 1423-1, FEB 2001

3.8.6 Product Definition Data (PDD)

DI-MGMT-82001A

4. AUTHORITY (Data Acquisition Document No.)

3. SUBTITLE

See Block 16

2. TITLE OF THE DATA ITEM

B020

1. DATA ITEM NO.

F. CONTRACTORE. CONTRACT/PR NO.

W900KK-23-R-0005See Block 16

D. SYSTEM/ITEM

TDP

C. CATEGORY

TM OTHER MGMT

B. EXHIBITA. CONTRACT LINE ITEM NO.

The public reporting burden for this collection of information is estimated to average 110 hours per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including suggestions for reducing this burden, to the Department of Defense, Executive Services and Communications Directorate (07040188). Respondents should be aware that notwithstanding any other provision of law, no person shall be subject to any penalty for failing to comply with a collection of information if it does not display a currently valid OMB control number.

Please do not return your form to the above organization. Send completed form to the Government Issuing Contracting Officer for the Contract/PR No. listed in Block E.

Form Approved OMB No. 0704-0188

CONTRACT DATA REQUIREMENTS LIST

(1 Data Item)

N/A

8. APP CODE

DD

7. DD 250 REQ

D

9. DIST STATEMENT

REQUIRED

13.DATE OF SUBSEQUENT

SUBMISSION

11. AS OF DATE

12.DATE OF FIRST

SUBMISSION

ASREQ

10. FREQUENCY

ReproReg

Final

Draft

b. COPIES

a. ADDRESSEE

14. DISTRIBUTION

J. DATEI. APPROVED BYH. DATEG. PREPARED BY

Block D: CBID III - Sample TO - VACR & AEC

Block 2: DOD Risk Management Framework (RMF) Package Deliverables

1. BLOCK 4: The contractor shall address all required did content in the active tense.

2. BLOCK 7: The contractor shall initiate a zero cost receiving report in wide area workflow (WAWF) immediately after submitting the data in accordance with BLOCK 14. A WAWF receiving report is required for every data item submission (initial and subsequent submissions) to the Government.

For data items that are separately priced, the contractor shall initiate a WAWF invoice in lieu of a zero cost receiving report.

3. BLOCK 9: All submissions of the document shall display the following:

DISTRIBUTION STATEMENT D: DISTRIBUTION AUTHORIZED TO THE

DEPARTMENT OF DEFENSE AND U.S. DEPARTMENT OF DEFENSE

CONTRACTORS ONLY DUE TO CRITICAL TECHNOLOGY AND VULNERABILITY

INFORMATION, EFFECTIVE 5 APR 21. OTHER REQUESTS FOR THIS

DOCUMENT SHALL BE REFERRED TO U.S. ARMY PEO STRI,

SFAE-STRI-ST-VTS, 12211 SCIENCE DRIVE ORLANDO, FL 32826-3224.

WARNING: THIS DOCUMENT CONTAINS TECHNICAL DATA WHOSE EXPORT IS

RESTRICTED BY THE ARMS EXPORT CONTROL ACT (TITLE 22, U.S.C., SEC

2751 ET SEQ.) OR THE EXPORT ADMINISTRATION ACT OF 1979, AS AMENDED,

TITLE 50, U.S.C.. APP. 2401, ET SEQ. VIOLATIONS OF THESE EXPORT

LAWS ARE SUBJECT TO SEVERE CRIMINAL PENALTIES. DISSEMINATE IN

ACCORDANCE WITH THE PROVISIONS OF DOD DIRECTIVE 5230.25.

DESTRUCTION NOTICE: UNCLASSIFIED, LIMITED DOCUMENT, DESTROY BY

ANY METHOD THAT WILL PROTECT DISCLOSURE OF CONTENTS OR

RECONSTRUCTION OF THIS DOCUMENT.

4. BLOCK 12: Drafts shall be provided to support all program reviews. First official submission shall be due 30 working days prior to the start of the Authorization and Assessment (A&A) Event. The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor will have 10 working days to incorporate changes and resubmit back to the Government.

5. BLOCK 13: Revisions as required through the life of the contact. The Government will have 15 working days for review, accept/reject and provide comments/corrective actions. The contractor will have 10 working days to incorporate changes and resubmit back to the Government.

6. BLOCK 14: All submissions shall be uploaded into WAWF. The submittal shall be in an editable, unlocked and reproducible electronic file(s) in current MS Office format, Adobe PDF, and native format (if other than MS Office or Adobe PDF). Files greater than 10 MB shall be submitted via DoD SAFE (Secure Access File Exchange) at https://safe.apps.mil/.